Related
What's the best way to clean the trackball? mine is really stiff and slippery.
I guess the best way would have to be just wipe it was a wet paper towel or something, I don't think there's an easy way to take out your trackball like on blackberries.
Anartic said:
I guess the best way would have to be just wipe it was a wet paper towel or something, I don't think there's an easy way to take out your trackball like on blackberries.
Click to expand...
Click to collapse
+1
If you need to take it out, good luck. A lot of people have rendered there trackball useless that way
JAguirre1231 said:
+1
If you need to take it out, good luck. A lot of people have rendered there trackball useless that way
Click to expand...
Click to collapse
Why on earth decide that it would be a good idea to make the trackball non-removable?
gonintendo said:
Why on earth decide that it would be a good idea to make the trackball non-removable?
Click to expand...
Click to collapse
So you pay more when you break it, duh
I drop my phone in a glass of beer for about 30 minutes and never again deal trackball issues.
cloverdale said:
I drop my phone in a glass of beer for about 30 minutes and never again deal trackball issues.
Click to expand...
Click to collapse
You actually put your entire phone in a glass of beer? For a half hour? On purpose? And the phone did not get ruined? I would call that extremely lucky.
tardie said:
You actually put your entire phone in a glass of beer? For a half hour? On purpose? And the phone did not get ruined? I would call that extremely lucky.
Click to expand...
Click to collapse
I would not say I am lucky, just a liar.
cloverdale said:
I would not say I am lucky, just a liar.
Click to expand...
Click to collapse
lol 123456789
cloverdale said:
I would not say I am lucky, just a liar.
Click to expand...
Click to collapse
Hahahaha
Liar!
I got that he was using sarcasm
i just cleaned my non-responsive trackball with a cotton ball and rubbing alcohal and now the thing works again
Mighty Mouse FTW!
I would assume that the same method used to clean Mighty Mice would apply here.
1) Get a clean sheet of paper.
2) Vigorously, rub the trackball back and forth over the paper.
3) Rub some alcohol on the ball with your finger and repeat.
4) Evidence of cleaning should be on the paper.
Hope that helps.
MLonon said:
I would assume that the same method used to clean Mighty Mice would apply here.
1) Get a clean sheet of paper.
2) Vigorously, rub the trackball back and forth over the paper.
3) Rub some alcohol on the ball with your finger and repeat.
4) Evidence of cleaning should be on the paper.
Hope that helps.
Click to expand...
Click to collapse
I noticed you're from Lexington! haha sorry, I just am considering UK for the legacy program, lots of family out there.
Hey guys,
A little help here if you can. The other day my step son spilt his coke and luckily it only caught a few drops on my captivate, destroyed my desktop's keyboard though. I thought I cleaned it all well enough since it was truly only a few drops.
That was last night, today my volume and power and the door for my usb cable are sticking to the point of driving me insane. The volume is the worst of them. They still work I only have to press them like I am wanting to crush them.
My question is can any of you post a fix for this problem. A simple one if there is one. If there is no other solution but to take it apart and clean it could some one point me to a respectable walkthrough for doing so.
Thanks.
MentalDragon said:
Hey guys,
A little help here if you can. The other day my step son spilt his coke and luckily it only caught a few drops on my captivate, destroyed my desktop's keyboard though. I thought I cleaned it all well enough since it was truly only a few drops.
That was last night, today my volume and power and the door for my usb cable are sticking to the point of driving me insane. The volume is the worst of them. They still work I only have to press them like I am wanting to crush them.
My question is can any of you post a fix for this problem. A simple one if there is one. If there is no other solution but to take it apart and clean it could some one point me to a respectable walkthrough for doing so.
Thanks.
Click to expand...
Click to collapse
U could try putting it in a bag of rice for a couple days (with battery pulled out). Rice absorbs moisture very effectively.
diablo009 said:
U could try putting it in a bag of rice for a couple days (with battery pulled out). Rice absorbs moisture very effectively.
Click to expand...
Click to collapse
Yeah I had thought of that but this is coke. I am not having problem with moisture but with the sticky sugary leftover after it dried.
Maybe try a little rubbing alcohol or other type of cleaner that would be safe on plastic and use a toothpick with cloth to get around the buttons.
Honestly I wouldn't try this unless you're not worried about losing the phone completely. I've done it on one of my old phones and it worked so I'll throw it out there but I am in no way suggesting you try it.
Take your battery out.
Get a ziplok bag and fill it with rubbing alcohol.
Throw your phone in the bag and seal it up.
Shake the phone around in the bag for a while.
While the phone is still in the bag push the move all the moving parts that are sticking until they don't stick.
Take the phone out of the bag and put it in a bowl of rice for a day or two until dry.
It may only take a day since alcohol dries extremely fast.
P.S. This method will activate your water damage sticker. (Unless you can seal around it, I siliconed a little cap over mine)
Sent from my SAMSUNG-SGH-I897 using XDA App
Get yourself a can of air, the stuff used for dusting electronics and such. Turn the can upside down and spray the buttons out lightly while working them. Go easy with the trigger on the can as it will be liquid when it comes out and will be EXTREMELY COLD but it will dry almost instantly. removing the battery door will give you better access to the buttons. I have saved a few beer and soda damaged keyboards this way.
I would use a cotton swab (or ball) and some alcohol. Soak the cotton in alcohol; squeeze out most of the excess, but leave enough that some can work into the crannies around the sticky parts and rub it around where the stickiness is. Maybe use a dry tissue to suck out the alcohol afterward. Repeat until you are either happy with the way things work or you are convinced that it's hopeless.
1.) Smack your step son in the face.
2.) Even though it's Coke, try the rice method.
3.) If you wanna really clean it open it up and use a cue tip.
xThe Enforcer said:
1.) Smack your step son in the face.
2.) Even though it's Coke, try the rice method.
3.) If you wanna really clean it open it up and use a cue tip.
Click to expand...
Click to collapse
I do hope your kidding..besides ya can't do that anymore these days..the kids are smart enough to scream child abuse...lol
The teardown procedure is here if it comes to that.
Samsung Captivate (AT&T Samsung Galaxy S) Teardown | TechRepublic Photo Gallery
rpicaso said:
I do hope your kidding..besides ya can't do that anymore these days..the kids are smart enough to scream child abuse...lol
The teardown procedure is here if it comes to that.
Samsung Captivate (AT&T Samsung Galaxy S) Teardown | TechRepublic Photo Gallery
Click to expand...
Click to collapse
I was just being sarcastic, lol. And you're right about the child abuse part but as long as the kid isn't bleeding or really bruised most cops would just give the parent a high five, lol
just take the phone apart and clean it with rubbing alcohol and a cotton swab. careful with the rubbing alcohol though, it is up to 30-40% water and can damage the phone. just like water can
Well. All things are good now. Someone suggested to just keep working the buttons enough and it would clear up. Sure enough today my buttons are like new. Thanks for all your help.
Sent from my SGH-I897 using XDA App
Hi guys,
Has anyone tried to remove the silver AT&T logo from behind the glass? Thinking about giving it a go but thought I would check to see if anyone else had given it a shot and had any pointers.
Thanks,
Krisbo
Electrical tape
mcord11758 said:
Electrical tape
Click to expand...
Click to collapse
Lol, that would look awful! I was thinking I would fully disassemble it and use spray paint.
Wow that its dedication to the cause. Yea honestly I got nothing
Krisbo said:
Lol, that would look awful! I was thinking I would fully disassemble it and use spray paint.
Click to expand...
Click to collapse
i take no responsibilty for this, but I used paint thinner(gun wash actually seeing as I work at a paint shop lol) and rubbed it off my old phone, quite easily actually.
I personally would try that before spray paint...
Get a cover that covers it
U can't see the logo this way, and u r still covered by warranty just in case.
Be careful with 'paint thinner', there is more than one kind. I'd start with rubbing alcohol, then acetone, progress to mineral spirits, then if that doesn't work try some MEK(methyl ethyl ketone). You can quickly melt away any plastics or finishes if you use too strong a product first time out.
Hey all,
To keep a long story short, saliva (from my 1 year old daughter) got on/in my phone and now part of the screen does not work. When I say "does not work", the phone is mostly functional, but if I try to scroll through forums or menus then it will try and select some of them as I scroll. Also, some of the onscreen keys don't function properly when using the keyboard on the side. And, the swype does not work.
I did turn my phone off and leave it in a bowl of uncooked rice over night, but that didn't seem to fix much. I even went to the length of re-flashing my ROM and wiping data/cache.
Any suggestions would be greatly appreciated! (I am not afraid to take my phone apart)
Rice is a little to big to get into the nitty gritty of the phone and really dry it out, it may be too late by now but a more thorough way to dry out is to, Take the phone apart, get a q-tip dipped in rubbing alcohol and go over the entire phone. The moisture mixed with the alcohol with evaporate much much faster.
studacris said:
Rice is a little to big to get into the nitty gritty of the phone and really dry it out, it may be too late by now but a more thorough way to dry out is to, Take the phone apart, get a q-tip dipped in rubbing alcohol and go over the entire phone. The moisture mixed with the alcohol with evaporate much much faster.
Click to expand...
Click to collapse
Any specific parts I should focus on primarily? I was thinking that the issue may be where the screen cables connect to the mobo.
That's a good assumption.... going over the entire phone will cover all those bases.
Like i said it could already be too late. Good luck man.
Just got done cleaning the internals.. Same spots on the screen are not responding correctly. Looks like it's time to hit up e-bay for a replacement
That's what it sounded like.
But I wouldn't do alcohol wiping. I'd leave it in clothes dryer.
For your next phone pls get a case and screen protector.
bravomail said:
That's what it sounded like.
But I wouldn't do alcohol wiping. I'd leave it in clothes dryer.
For your next phone pls get a case and screen protector.
Click to expand...
Click to collapse
Have both a screen protector and case. I heard clothes dryers are bad news for phones though.
Demonic240 said:
Have both a screen protector and case. I heard clothes dryers are bad news for phones though.
Click to expand...
Click to collapse
It is as the dryer would probably not only break the phones screen but can shake around the hardware as well. Rice, or a hair dryer set on low is the best bet for drying out phones.
You guys really need your sarcasm meters checked...
I probably do right now. I didn't get off work until two hours ago. Will try better tomorrow haha.
Sent from my Samsung Captivate running Team ICSSGS 4.0.3
so-ooo. hair dryer? really? it melts plastic last I saw.
Clothes dryer was bad call, so I retract. May be leave it in furnace room? Stuff gets dry there pretty quick.
I liked sarcasm meter comment. Made my day!
bravomail said:
so-ooo. hair dryer? really? it melts plastic last I saw.
Clothes dryer was bad call, so I retract. May be leave it in furnace room? Stuff gets dry there pretty quick.
I liked sarcasm meter comment. Made my day!
Click to expand...
Click to collapse
Yeah.. down south here we don't have furnace rooms
I completely disassembled my phone last night (sans removing glass/lcd) and used rubbing alcohol over all the ribbon connectors. On the plus side, I didn't screw anything else up... on the down side though, still have that nice dead zone on my screen.
Now to either buy a replacement off e-bay or try and pilfer my brothers Infuse that he soft bricked until my contract is up in June.
Ended up fixing my brothers infuse. Nice phone, but I'm going to miss ICS
Sent from my SAMSUNG-SGH-I997 using XDA
Do you think the speaker grill will pop off in the future? I just realized mine has quite a gap, you can slide a paper in.
But I don't want to resort to warranty since I have already been using it for a month plus, and got stuff working and all.
The grill I have in question is the bottom one.
I don't know how strong the glue supporting the bottom grill is.
if it comes off, stick it back on with superglue
IINexusII said:
if it comes off, stick it back on with superglue
Click to expand...
Click to collapse
Love it! :silly:
snowblind2142 said:
Love it! :silly:
Click to expand...
Click to collapse
my almost gapless phone is now showing gaps n getting bigger everytime i look at it.. But.. Meeeh
IINexusII said:
if it comes off, stick it back on with superglue
Click to expand...
Click to collapse
Haha true.. But I wonder how hard it might be to glue it back together, I'm really bad with this kind of things.
fluxthesky said:
Haha true.. But I wonder how hard it might be to glue it back together, I'm really bad with this kind of things.
Click to expand...
Click to collapse
the method of heating the grill and clamping it down (was a thread about it somewhere) is probably an option to try. i might try it on mine too since the gaps are getting big..
IINexusII said:
the method of heating the grill and clamping it down (was a thread about it somewhere) is probably an option to try. i might try it on mine too since the gaps are getting big..
Click to expand...
Click to collapse
Dang.. That sounds kind of too much for me. I guess I just gotta put my faith on HTC's glueing process or hopefully it pops off at least before my warranty.
yea..just use superglue..
i use those very liquid glue to stick it back..now its gapless...just apply very very little and its enough..
just wanna avoid the liquid from dripping to the speaker girll..^^
randykzc said:
yea..just use superglue..
i use those very liquid glue to stick it back..now its gapless...just apply very very little and its enough..
just wanna avoid the liquid from dripping to the speaker girll..^^
Click to expand...
Click to collapse
Wow did your grill pop out? Or did you replace them intentionally.
fluxthesky said:
Wow did your grill pop out? Or did you replace them intentionally.
Click to expand...
Click to collapse
nono...my grill did not pop out..its just that there is gap there..i just use glue to glue it ..now its gapless..^^
randykzc said:
nono...my grill did not pop out..its just that there is gap there..i just use glue to glue it ..now its gapless..^^
Click to expand...
Click to collapse
Wow how did you managed to get the glue inside the gap? I mean I know it's quite a gap, but I don't think it's THAT wide to be able to squueze glue in..
Are the gaps really that much of a concern? I have a bit of a gap on the top speaker grill, but I have a case on the phone too. I don't even notice it now. I'm more concerned about the durability of "Gorilla Glass." I've had 3 iPhones now and I've never scratched my screen. I've owned the HTC One for a month and I've got two scratches already...
fluxthesky said:
Wow how did you managed to get the glue inside the gap? I mean I know it's quite a gap, but I don't think it's THAT wide to be able to squueze glue in..
Click to expand...
Click to collapse
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
randykzc said:
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
Click to expand...
Click to collapse
Ahh sounds idiotproof.. mind telling us what specific liquid glue did you use? I might do this in the future.
T5BRICK said:
Are the gaps really that much of a concern? I have a bit of a gap on the top speaker grill, but I have a case on the phone too. I don't even notice it now. I'm more concerned about the durability of "Gorilla Glass." I've had 3 iPhones now and I've never scratched my screen. I've owned the HTC One for a month and I've got two scratches already...
Click to expand...
Click to collapse
For me it's more of a durability thing. I'm just afraid it will pop out from the glue losing it's strength in the future.
randykzc said:
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
Click to expand...
Click to collapse
Well, if you're gonna use instant glue, you're prolly gonna end up sticking your fingers to the thing... so.
It might work if you have someone else hold it upside down and you're REAL careful.
The warranty is there for a reason. Use it.
Sent from my Nexus 4 using xda app-developers app
Haha superglue works!!! Now my phone is gapless again.. Super WIN
NexusF said:
The warranty is there for a reason. Use it.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
15 bucks for shipping, plus 1-2 weeks w/ no phone, ntm the chances of getting a refurb and/or defective device.
I've heard some really bad horror stories, like trading in phones >3 times.
fluxthesky said:
Ahh sounds idiotproof.. mind telling us what specific liquid glue did you use? I might do this in the future.
Click to expand...
Click to collapse
i use Loctite super glue..i think it drys pretty fast..so after apply have to immediately close the gap and wipe off the glue..
http://www.loctiteproducts.com/p/4/2/sg_bottle/overview/Loctite-Super-Glue-Longneck-Bottle.htm