I've had a search but cannot find an answer to this, when I listen to headphones using the supplied dongle, the sound is very recessed, the vocals are barely audible, I have changed the audio settings to atmos on etc and different eq but still the same. I read someone say they had to insert the dongle the other way up, I did that and the sound was OK then, however when I tried it again later the sound was rubbish again no matter which way I inserted the dongle. It on the odd occasion will sound fine but 95% of the time is rubbish when I try it.
I tried different music players to see if any difference, iplayer radio is always bad, other apps are where I have heard the music fine on the odd occasion.
I then bought the Google USB-C adaptor, tried that, when that is plugged in I always get a clicking sound for a few seconds, the sound is always rubbish with that too, very faint vocals again, no matter which way the dongle is inserted. When I use that the phone defaults it to charge USB device, I have changed the options to all the others (charge only, transfer files etc) still sounds the same.
When I use the supplied USB headphones the sound is fine, no issues at all on all the apps tried. Bluetooth audio is fine when I have tried that as well.
Is there anyway to fix this? The phone hasn't been rooted and doing software updates has made no difference.
Related
I use FM transmitter to listen to my music on Kaiser (using Y-splitter), but somehow on device mic gets disabled, and I can't make a phone call without plugging the cable out of Kaiser.
Is there configuration available that allows me to use car speaker as phone out, and still use on-deice mic?
If not, is there an alternative to plugging out the USB cable every time I get a call?
bump, anyone!?
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
jomo25 said:
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
Click to expand...
Click to collapse
I think you're right.... wondering if there's any way around it like having BT headsets??
did you ever find a registry edit or alternative to fix this. i have the same question
There is one reason why I have never used my Kaiser as a music/media player - the lack of a headphone jack. I am now look at upgrading to a Rhodium, but again HTC fails to include the most basic of requirements. pfff
I know that I can get a headphone adaptor, or even use bluetooth, but the problem for me is that whenever the usb plug falls out, as it invariably does, or the bluetooth signal drops, I instantly upset everyone within 100m by blasting crappy tinny sounding music at them through the phone speaker. Of course, 3.5mm jacks don't have the same habit of just falling out.
Therefore, is there any way that I can set up the phone so that when music or media is playing (usually through Coreplayer) the phone speaker is disabled?
Thanks
Plug in headphones? Otherwise if your not using the speakerphone how would you hear anything?
I've used a 3.5mm to mini usb cable and adapter, they both worked fine. I liked the cable better since i worried less about it breaking in my pocket. Its not the exact same one i am using right now but this one is only a penny.
http://www.amazon.com/Stereo-Headset-Speaker-Adaptor-phones/dp/B0013URK04/ref=pd_cp_e_3
but therein lies the problem - because the headphone output is mini-usb, it is always at risk of falling out (far more so than a 3.5mm jack).
Yea life is tough that way. I've yet to have anything just fall out of my mini usb port myself.
I suppose you could write a script that detects if anything is plugged in to the usb port ala Audio Booster, and auto mute if nothing is detected. But i don't think i've seen an auto mute app or anything like that.
Here's a kind of work around. I found this doing a google search for Auto Mute for PPC. http://www.pocketpcfreeware.com/en/index.php?soft=277
You could fire it up set it for an hour or so and listen away w/out fear, in theory at least.
that's a great idea - I'll give it a go. Thanks for taking the time.
Hope it works for ya! I can't get to the site and test it myself. I'm at work
Looks like the link is broken, but the idea is worth spending some time with google for
Damn.
This one says WinMo 5 ver 1.1, but i would think WinMo 6 is backward compatible. What about this one?
http://handheld.softpedia.com/get/System-Utilities/Enhancements/Automatic-Mute-WM5-36048.shtml
I have searched everywhere and can't seem to find a answer to this...
I use a phone cradle in the car, using my topaz as my music player, connecting my phone to my car stereo with a male-male 3.5mm audio jack.
I want to be able to steam music via bluetooth from any other compatible phone / device to my phone, meaning I don't have to trail cables everywhere when a passenger wants to play something.
I would have thought this to be a simple-ish thing to setup but cannot find any information on how to do it. Is it even possible, and where would I start if it is?
I also want to use my on-board mic when the headset is plugged so I can have call audio over car speakers, although iv been led to believe this isn't possible because of hardware reasons, can anybody clarify that?
Apologies if this is in the wrong forum, not really sure where it should have gone.
If I understand you correctly, you want to stream music TO your phone over BT from another device? Not possible.
For hearing call over speakers and using mic, you need to get the M-F w/built in mic.
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
mitsi said:
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
Click to expand...
Click to collapse
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Bruce Inman said:
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Click to expand...
Click to collapse
That set up looks great Bruce, but I don't want to be fiddling about plugging in so many cables with so many wires visible. Brodit does something similar too, all in a cradle with an extended wire so you would be able to hide all the cables....
Hello again
Really often I use my phone as a media player, especially in my car, connected via headphones cable. Until now all works fine with all my devices, but with the Maze Alpha the sound is just in mono (left side) - with any app. In the android settings I disabled the sound reinforcement options but nothing is changed.
I know that the speaker plays sounds just in mono, but I found no hints in reviews that this is the same for headphones. If this device generally not able to play sounds in stereo, is this a big fail for the manufacturer.
So please check my issue and give me a feedback. I'd also be happy if someone can tell my a solution for this to get real stereo sounds.
Many thanks in advance and best wishes
Dan
Headphone jack
Same issue here only one chanel
I haven't try to use it directly with large speakers though. It seems that you might need an amplifier to get the right sound despite defaulting to a stereo sound system only. The secret is to sound issue in Maze Alpha is to get quality earphones.
Hi. I tried looking through the forum via google, but didnt see anyone asking, so i would like to ask here.
I customized my Samsung Note 8 sound via Sound Quality and Effects -> Adapt Sound -> Personalize Sound for my Nakamichi earphones and the sound is superb. I love it.
I also spent hours to slowly tune my car audio system via it's amplifiers and my active sub-woofers. Playing from FM radio or MP3 via USB is fine and awesome. But when i play from my phone, it is horrible.
From time to time stream spotify or listen to mp3 stored on my phone to my car stereo system. I am currently just streaming via Bluetooth but the sound is aweful. the bass is off and too loud and it hurts. The sound will crack and it is just dreadful.
But i do not want to retune the Personalized sound on my phone or the amplifiers on my car.
I will be getting a new car btw, and it comes with android auto but i have yet to test my phone with android auto. the car dealer would not let me connect for "i dont know what reasons" so i am a bit worried the sound may come out horrible as well.
Is there a way to set separate sound profiles so i can switch them easily? For use in car and for use when using earphones via 2.5mm earphone jack.
Any help here is greatly appreciated.