I have another xiaomi mi 5 and it works fine in my pc, so the issue is not the cable or the PC.
my xiaomi mi 5 is using miui 10.0.1.0 .
I formated the device 2 times.
I bought from a local seller so I dont know if its a software or hardware problem.
The phone is charging when connected to the computer.
Helium backup app detect the input with the computer when I plug in, but adb devices command doesnt show the mi 5 plugged. (it shows my oneplus one so its not a adb driver problem)
I don't know what to do, as it doesnt show in xiaomi mi flash I will need unlock it and try with fastboot to reinstall rom??
PS: Device manager doesnt detect the phone and dont show any changes)
Dont worry,
Just go to service center and replace phone connecting cercuit it will cost only 1200 i had same issue last week.
Related
i did try to install miui on my mi a2 using miflash but i got a error while flashing
my phone got bootloop and i can't go to bootfast
i did open the phone and put in EDL mode with the pin test
i tryed to install the stock rom and i got sucess
but my mi a2 wont turn on
i put the charger and the led notification dont work
i put on pc and isn't detected
i put in a turbo charger and still the problem
but when i put in EDL mode using the pin test the pc recognizes the phone
but dont turn on
Recently I couldn't get my PC to recognize the cell phone, I tried several cables, other pc's and even re-installed rom with test point (The only thing that works) Any suggestions?
So the phone boots and works but it isn't recognized by any pc?
I had a Mi A2 with the same problem, tried everything possible, without success ... I sold and bought another.
faffu41 said:
So the phone boots and works but it isn't recognized by any pc?
Click to expand...
Click to collapse
Yes
Have ypu changed USB mode to mtp?
my mi a2 cant connect to pc for file transfer. i tried to set default option in developer option, but the option is grey out i cant change the settings. any help on android 9
when i updated to android 10 my pc didn't recognize MTP so i had to unistall drivers and let windows to install it again
hope it helps!
faffu41 said:
Have ypu changed USB mode to mtp?
Click to expand...
Click to collapse
I can't change the options
Unlocking Tool gets stuck at either 50 or 99 %. "Can't unlock, Couldn't get info"
So, I've tried to unlock my phone for 2 months now without any success. I've done basically everything I could think of, but the same problem persists. The problem is that it gets stuck at either 50 or 99%; followed by a message that says: "Can't unlock, Couldn't get info" Also, I've made sure to wait at least 10 days after I've reconnected my account to retry but the unlock tool won't even show how long I have left.
What I've tried:
- Changing USB ports, Gen 2, 3 and 3.1.
- Using a USB HUB
- Reinstalling ADB drivers
- Resetting my PC
- Trying a different PC
- Reinstalling Qualcomm Fastboot drivers
- Different cable
- Resetted my MI account
- Deleted and created a new MI account
- Used another sim card and phone number
I'm quite desperate as unlocking it is somewhat important for me. As a poor student, I can't really afford to sell it and buy another phone to unlock either.
I'm not sure what's going wrong. I've unlocked many (well, 5) android phones in the past and never had any major issues like this.
Any tips and ideas would be appreciated.
I had this issue before , what I did to solve it is :
1)Use Intel system (AMD won't ever work) and enable usb debugging
2)Don't plug in your phone yet, open Mi Unlock and log in till You reach searching for phone step
3)Open Mi Unlock settings and click install driver
4)Make sure your phone is turned on normally and plug it in through USB 2
5)You will see message on pc telling u drivers are installed now check the phone to see (USB settings) click File Transfer ,now Mi tool should say plug your phone in boot loader mode
6)Turn off your phone and while it is turning off unplug the USB , now boot into fastboot and then plug ur phone in USB 3 port
This is tricky and buggy I got it first time and reached the message after 100% verifying but it said I still had to wait some time so when I tried to unlock it after the time passed I had to repeat these steps couple of times to work so be patient
The problem is mi tool needs both ADB and Fastboot drivers to be working but most of the time its only Fastboot driver due to the phone shutting down so its buggy as hell
https://prnt.sc/rbmvam
These are the drivers that should be both working so check them while repeating the steps if you got them both working you are good to go
The first time i tried to unlock my bootloader, unlock tool would be stuck at connecting to the device and couldn't see it.
No matter what i did it would never see it.
So i decided to try xiaomi tool v2 (not endorsed by Xiaomi). I also used a usb hub that i plugged to my laptop usb c and finally my device could be unlocked.
Did you buy the phone used or new?
Does it have a Global ROM, or it is a Global Version or CN?
I had installed pixel experience on my Mi A2(jasmine_sprout) recently, after some days I had installed pixel experience plus using twrp. From that time my mobile is not detecting otg and when I connect it to pc it's only charging (tried file transfer in usb options,not working), whenever I try I put my phone fastboot mode,on my pc it's showing waiting for devices and my mobile is not rooted ,(twrp not installed permanently)help me to get out of this?
Siddiq_siddu said:
I had installed pixel experience on my Mi A2(jasmine_sprout) recently, after some days I had installed pixel experience plus using twrp. From that time my mobile is not detecting otg and when I connect it to pc it's only charging (tried file transfer in usb options,not working), whenever I try I put my phone fastboot mode,on my pc it's showing waiting for devices and my mobile is not rooted ,(twrp not installed permanently)help me to get out of this?
Click to expand...
Click to collapse
you SOT ....
you need adb & fastboot that works to do anything
you can only try 3 things:
1. find out what is wrong with usb ...try new official cables , reinstalling drivers, different usb ports , different pc
2. using application from playstore and on your phone enable and authorize adb via wifi / network
use this adb to force phone to boot to edl mode:
adb reboot edl
3. open your mobile with screwdriver following video tutorials .... using testpoint force edl mode
#in edl mode your phone WILL be detected if you install Qualcomm drivers then you can flash stock rom with miflash
i dont know why people mess with PE because like 80% have problems with wifi or usb or something
so i have a redmi 4x that my friend gave me and i factory reset it and now its locked because of xiaomi account i tried to use the xiaomi unlock tool but the phone is not being detected i installed all the drivers needed including xiaomi usb drivers qualcomm drivers adb and fastboot drivers but still it cant be detected windows is not even giving anysound that i connected it can any one help me plz
Do you mean you can't get through the google intro bc it refuses any other login than the one that was there originally? If so, all you need is for the friend to log in and then you can go on normally.