i did try to install miui on my mi a2 using miflash but i got a error while flashing
my phone got bootloop and i can't go to bootfast
i did open the phone and put in EDL mode with the pin test
i tryed to install the stock rom and i got sucess
but my mi a2 wont turn on
i put the charger and the led notification dont work
i put on pc and isn't detected
i put in a turbo charger and still the problem
but when i put in EDL mode using the pin test the pc recognizes the phone
but dont turn on
Related
Hi friends. I have mi 5x from aliexpress. Seller has flashed some custom mi A1 rom into it. I was waitiong for ota upgrade but never happened. Thinking that it is official A1 rom i flashed gcam for a1 and phone died. I cant turn it back on. When usb cable plugged in phone just vibrate evey 2 seconds and led is blinking. I have tried many versions of miflash and many roms but nothing works. No fastboot so i can only connect phone via edl pins. But when trying to flash i have problem with hello packet and error happens. Please help me. What else i can do?
Norwek said:
Hi friends. I have mi 5x from aliexpress. Seller has flashed some custom mi A1 rom into it. I was waitiong for ota upgrade but never happened. Thinking that it is official A1 rom i flashed gcam for a1 and phone died. I cant turn it back on. When usb cable plugged in phone just vibrate evey 2 seconds and led is blinking. I have tried many versions of miflash and many roms but nothing works. No fastboot so i can only connect phone via edl pins. But when trying to flash i have problem with hello packet and error happens. Please help me. What else i can do?
Click to expand...
Click to collapse
Did you manage to find any solution?? I have the same problem!
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
I have another xiaomi mi 5 and it works fine in my pc, so the issue is not the cable or the PC.
my xiaomi mi 5 is using miui 10.0.1.0 .
I formated the device 2 times.
I bought from a local seller so I dont know if its a software or hardware problem.
The phone is charging when connected to the computer.
Helium backup app detect the input with the computer when I plug in, but adb devices command doesnt show the mi 5 plugged. (it shows my oneplus one so its not a adb driver problem)
I don't know what to do, as it doesnt show in xiaomi mi flash I will need unlock it and try with fastboot to reinstall rom??
PS: Device manager doesnt detect the phone and dont show any changes)
Dont worry,
Just go to service center and replace phone connecting cercuit it will cost only 1200 i had same issue last week.
Hello, I just bought an edl cable like THIS and i dont know how to use it properly. I tried yo reach the seller but he didn't reply me at all... I did some research around the web and I just tried the normal method but it doesn't work:
Boot into fasboot mode, connect the edl cable, press and hold power until it starts restarting (when the screen turns black) and then quick press the cable's switch and hold until the phone goes into edl mode. It doesn't work.
By the way I'am trying this in my Xiaomi Mi5 (and i tried this with a Mi Mix 2 and another Mi5 and I got the same result). As far as I read, not all phones supports the deepflash cable... I am trying this because the test point method doesn't work in this mi5 phone, probably bad PCB I don't know (but i does work in my other Mi5).
am I using it correctly? :S
Deepcable EDL is blocked since MIUI 8.
Now the only way to get into EDL mode is testpoint method.
the last boot version from miui doesnt work the deep flash cable because xiaomi disabled it to avoid fake china roms , so the only way its to testpoint or downgrade the bootloader
I got bricked my xiaomi mi a2, unscrewed it and went into edl mode. When i connect it into computer, it identifies phone like storage device and mi flash tool cannot flash it because of "error: flash timeout". How can i solve it? Maybe i ve installed wrong drivers? (sory for bed inglesh)
have you installed qualcom drivers ??
of not first install the qualcom drivers then try.
Hii! ^^ Yesterday I tried to root my Mi A2, but it screwed up my phone. Then, today I tried to flash the stock rom into my phone with miflash. The thing is that it stucked at 100%, so I searched on Google. I found a java program that worked for many people, so I wanted to try it. When I was ready to open the program, I closed miflash. And now my pc won't detect the phone both on the Android One logo and fastboot mode. What can I do?