Hello everybody,
I bought new Note 8 to replace my Galaxy S8.Im very happy with the purchase but lack of updates worries meIm stuck with N950FXXU3CRB9 March security update and can't get any further updates at all. Can I do anything to get it sorted without flashing firmware?I can live without Volte and Samsung Pay but I would def like to receive security and other system updates.
Any help much appreciated
Tom
lord_belial78 said:
Hello everybody,
I bought new Note 8 to replace my Galaxy S8.Im very happy with the purchase but lack of updates worries meIm stuck with N950FXXU3CRB9 March security update and can't get any further updates at all. Can I do anything to get it sorted without flashing firmware?I can live without Volte and Samsung Pay but I would def like to receive security and other system updates.
Any help much appreciated
Tom
Click to expand...
Click to collapse
Try a factory reset. This worked for me a while back.
Make sure to back-up data.
I'm going to do it now and I'll post how did I get on.Thanks
Unfortunately it didn't help still no OTA updates...
Go to Samsung Science put in model..build number will tell you if there is an update.
NOTE9...THE BEAST
butchieboy said:
Go to Samsung Science put in model..build number will tell you if there is an update.
NOTE9...THE BEAST
Click to expand...
Click to collapse
I've tried that but my model is not on the list.(N950F)
butchieboy said:
Go to Samsung Science put in model..build number will tell you if there is an update.
NOTE9...THE BEAST
Click to expand...
Click to collapse
lord_belial78 said:
I've tried that but my model is not on the list.(N950F)
Click to expand...
Click to collapse
Samsung Science is only for the US version of the phone's. I wish they had a site like that for the international versions. But you can go to sammobile.com and check if your phone has any upgrades available. I doubt for the N950F that it doesn't have a newer software update, but on my phone the last update I got was in May which is the latest for my model unfortunately.
I have checked this and it looks like there are 3 updates available but I can't get them for some reason.I get a message that my phone is up to date all the time.
Sorry didn't realize you had International..my bad.
NOTE9...THE BEAST
Download the latest full ROM and flash with ODIN.
Just make sure you get the right ROM...
ultramag69 said:
Download the latest full ROM and flash with ODIN.
Just make sure you get the right ROM...
Click to expand...
Click to collapse
Is there any risk I'll turn my phone into a brick?
There is always some risk, as with all things in life, (interrupted process, corrupted files,
wrong files, etc) but the problems commonly arise when flashing unofficial roms
winol said:
There is always some risk, as with all things in life, (interrupted process, corrupted files,
wrong files, etc) but the problems commonly arise when flashing unofficial roms
Click to expand...
Click to collapse
I'm going to do my homework first as I have no clue how to pick the right rom nevermind flashing my phone.
Thanks a lot for help
I would recommend taking your device to a Samsung Service Center and let them take a look at it.
iceepyon said:
I would recommend taking your device to a Samsung Service Center and let them take a look at it.
Click to expand...
Click to collapse
Not necessary, he can just flash latest rom for the device through Odin.
sefrcoko said:
Not necessary, he can just flash latest rom for the device through Odin.
Click to expand...
Click to collapse
How can I be sure that I picked the right rom?And my csc is Malaysian but I have UK/Ireland firmware XEU/XEU/XME.Maybe that's a reason I can't get any updates?Can somebody advise?
Thanks a lot
Tom
lord_belial78 said:
How can I be sure that I picked the right rom?And my csc is Malaysian but I have UK/Ireland firmware XEU/XEU/XME.Maybe that's a reason I can't get any updates?Can somebody advise?
Thanks a lot
Tom
Click to expand...
Click to collapse
OS Updates are released in batches. Different countries will get them at different times. You should get it soon.
iceepyon said:
OS Updates are released in batches. Different countries will get them at different times. You should get it soon.
Click to expand...
Click to collapse
No he won't...If he is still stuck on the March update (see post 1) then he is not getting updates at all. It's not a question of staggered releases for different countries, it's likely because his CSC doesn't match.
lord_belial78 said:
How can I be sure that I picked the right rom?And my csc is Malaysian but I have UK/Ireland firmware XEU/XEU/XME.Maybe that's a reason I can't get any updates?Can somebody advise?
Thanks a lot
Tom
Click to expand...
Click to collapse
You can search updato.com or sammobile for the proper firmware for your device and flash it with the latest Odin. If, for example, you have an N960F, then search for that and then download the most recent specific country firmware that matches your original csc (XME). This will install the latest firmware and should also allow future updates. Suggest reading around a bit before you flash for the first time to be sure you're comfortable with the process. Better to be sure
sefrcoko said:
No he won't...If he is still stuck on the March update (see post 1) then he is not getting updates at all. It's not a question of staggered releases for different countries, it's likely because his CSC doesn't match.
You can search updato.com or sammobile for the proper firmware for your device and flash it with the latest Odin. If, for example, you have an N960F, then search for that and then download the most recent specific country firmware that matches your original csc (XME). This will install the latest firmware and should also allow future updates. Suggest reading around a bit before you flash for the first time to be sure you're comfortable with the process. Better to be sure
Click to expand...
Click to collapse
Many thanks for this.Im in the UK and would like to have the UK firmware.Can I flash my phone with the UK firmware or I have to use Malaysian one.I bought this phone online brand new unlocked but it is Asian version with Exynos.There was a sticker on the box saying about using the phone for 5mins to remove regional lock.This was done by the seller as I can use any sim.I just can't get any updates at all even using smart switch.
Many thanks again
T
lord_belial78 said:
Many thanks for this.Im in the UK and would like to have the UK firmware.Can I flash my phone with the UK firmware or I have to use Malaysian one.I bought this phone online brand new unlocked but it is Asian version with Exynos.There was a sticker on the box saying about using the phone for 5mins to remove regional lock.This was done by the seller as I can use any sim.I just can't get any updates at all even using smart switch.
Many thanks again
T
Click to expand...
Click to collapse
The 5 minute call for regional locks in a one time thing. You shouldn't have to worry about that ever again, regardless of what firmware you flash.
Now you can install the latest UK firmware, but not sure if OTA updates will work that way. If not, you can just repeat this process whenever new firmware is released.
Otherwise, flashing original firmware for your device (Malaysia) should fix OTAs if that's what you want
Related
Like many others i am having the FRP lock issues. /cry
I am guessing i need to restore my stock firmware per many of the suggestions. I am unable to see a build number b/c i am trapped in download mode. What firmware do i use? How do i choose? Thanks for the help.
I tried to flash this one but I think i just made things worse. Now I am gun shy to choose again.
https://forum.xda-developers.com/tab-s2/development/stock-official-t713-stock-firmware-t3392404
champs777 said:
Like many others i am having the FRP lock issues. /cry
I am guessing i need to restore my stock firmware per many of the suggestions. I am unable to see a build number b/c i am trapped in download mode. What firmware do i use? How do i choose? Thanks for the help.
I tried to flash this one but I think i just made things worse. Now I am gun shy to choose again.
https://forum.xda-developers.com/tab-s2/development/stock-official-t713-stock-firmware-t3392404
Click to expand...
Click to collapse
I assume you need the us version XAR wifi.... Correct?
champs777 said:
Like many others i am having the FRP lock issues. /cry
I am guessing i need to restore my stock firmware per many of the suggestions. I am unable to see a build number b/c i am trapped in download mode. What firmware do i use? How do i choose? Thanks for the help.
Click to expand...
Click to collapse
My 2016 Tab S2 8.0 uses this firmware: NRD90M.T713XXU2BQI1 which is Nougat. On Updato it shows a slightly different firmware at the link below.
https://updato.com/firmware-archive-select-model?record=0316698D4AF511E7963AFA163EE8F90B
Hey,
I just want to completely reformat my phone. What would be the best way, flashing stock FW using Odin, or simply doing a reset to factory via settings? I don't care about data/time/etc just want the best way to start new on the latest FW (which the phone is currently on right now).
It's an unlocked SM-N950U1 for the US market, direct from samsung.
Thanks!
Blaze9 said:
Hey,
I just want to completely reformat my phone. What would be the best way, flashing stock FW using Odin, or simply doing a reset to factory via settings? I don't care about data/time/etc just want the best way to start new on the latest FW (which the phone is currently on right now).
Thanks!
Click to expand...
Click to collapse
it helps to know the variant model you have now first. Is it unlocked abroad, or the states. Is it locked to carriers, or a mnvo. Odin can be a crap shoot, and no assurance of a custom rom working. Mainly KNOX security, thanks to samdumb does prevent roll backs, and i'm sure the next replies from others will guide you. Be sure, you know the risks. One WORD......BRICKED. Im not here to debate this, and until further info on present device model, not much can be said now. You can do a FDR via the button reset manner or menu UI driven. Odins for custom flashes of variants of firmware IF permissible.
Damn, totally forgot. This is an unlocked SM-N950U1 for the US market, direct from samsung.
Blaze9 said:
Damn, totally forgot. This is an unlocked SM-N950U1 for the US market, direct from samsung.
Click to expand...
Click to collapse
Wait a few days until latest firmware with FM radio is available from somewhere and flash from scratch using Odin would be my suggestion
Blaze9 said:
Damn, totally forgot. This is an unlocked SM-N950U1 for the US market, direct from samsung.
Click to expand...
Click to collapse
what are your intentions to improve its performance if needed or desired since its unlocked anyway. what isnt working or what do you want to add or change.
Blaze9 said:
Hey,
I just want to completely reformat my phone. What would be the best way, flashing stock FW using Odin, or simply doing a reset to factory via settings? I don't care about data/time/etc just want the best way to start new on the latest FW (which the phone is currently on right now).
It's an unlocked SM-N950U1 for the US market, direct from samsung.
Thanks!
Click to expand...
Click to collapse
I have the Exynos model, but my rule of thumb is generally to flash firmware through Odin. Factory reset is fine too, but if things are still wonky then something could have become corrupted (in which case a clean Odin flash will replace those files with the proper ones and solve the issue).
I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw
does wifi calling work this way or no bc its the unlocked version primarily?
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?
@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.
vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip
vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.
The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it
Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.
Hi all,
Please help me out!
I have a note 8 with (N950U) - XAA/XAA/SPR - and I have not received a single OTA update!
I used the firmware science method to install a few updates and flashed (using Odin) when Oreo was released.
But now I want to solve this issue and start receiving OTA updates. I do not mind using Odin again to get this sorted - but preferable not lose my data.
Thank you
AM
Are you using it in the US on a US carrier?
Mr. Orange 645 said:
Are you using it in the US on a US carrier?
Click to expand...
Click to collapse
No, I am in the UAE on etisalat.
ahmedmaklai said:
No, I am in the UAE on etisalat.
Click to expand...
Click to collapse
Then that's probably why you're not getting OTAs.
Mr. Orange 645 said:
Then that's probably why you're not getting OTAs.
Click to expand...
Click to collapse
Any Solutions??
I have tried looking for update on a US VPN but again, no result.
You think a change of region - SPR to something else will solve this issue?
Thnx
You have a branded device but not linked with any carrier in US. Change your firmware to an unbranded one and from CRL2 you will receive the last oreo stable CSA1 or you can download the firmware directly from an app like Updato from Google Play and wait that a beta stable on pie will be released.
SubwayChamp said:
You have a branded device but not linked with any carrier in US. Change your firmware to an unbranded one and from CRL2 you will receive the last oreo stable CSA1 or you can download the firmware directly from an app like Updato from Google Play and wait that a beta stable on pie will be released.
Click to expand...
Click to collapse
How do I change the firmware to unbranded ?
ahmedmaklai said:
How do I change the firmware to unbranded ?
Click to expand...
Click to collapse
Ok, this is the first guide as reference:
https://forum.xda-developers.com/showpost.php?p=74087672&postcount=4
Odin Tool normal just in case you need it:
https://androidfilehost.com/?fid=818070582850505662
I used the patched version:
https://androidfilehost.com/?fid=890129502657595813
Last Oreo Odin rom available:
https://androidfilehost.com/?fid=1395089523397886161
Staying in this version you have to theoretically receive updates from OTA
SubwayChamp said:
Ok, this is the first guide as reference:
https://forum.xda-developers.com/showpost.php?p=74087672&postcount=4
Odin Tool normal just in case you need it:
https://androidfilehost.com/?fid=818070582850505662
I used the patched version:
https://androidfilehost.com/?fid=890129502657595813
Last Oreo Odin rom available:
https://androidfilehost.com/?fid=1395089523397886161
Staying in this version you have to theoretically receive updates from OTA
Click to expand...
Click to collapse
Thank you i am going to try this.
Question, the guide says "Note - If you are flashing Unlocked Firmware from Carrier Firmware you must use Prince Comsy Odin otherwise, use regular Odin."
So, in my case i am going from a 950U firmware to 950U1, should i use odin or prince comsy odin? and is there a way to keep my data? or will it be reset for sure?
ahmedmaklai said:
Thank you i am going to try this.
Question, the guide says "Note - If you are flashing Unlocked Firmware from Carrier Firmware you must use Prince Comsy Odin otherwise, use regular Odin."
So, in my case i am going from a 950U firmware to 950U1, should i use odin or prince comsy odin? and is there a way to keep my data? or will it be reset for sure?
Click to expand...
Click to collapse
Use the modded Odin mentioned.
You can keep your data but in this case you will go to switch to a different firmware so is better that you do a backup with SmartSwitch and them go to recovery, do a format/factory reset , then in Odin flash the firmware, reboot and restore your data
SubwayChamp said:
Use the modded Odin mentioned.
You can keep your data but in this case you will go to switch to a different firmware so is better that you do a backup with SmartSwitch and them go to recovery, do a format/factory reset , then in Odin flash the firmware, reboot and restore your data
Click to expand...
Click to collapse
Great I will do a full reset. But when you say modded Odin is the prince comsey Odin?
try restoring your phone's firmware using Samsung Smart Switch.
ahmedmaklai said:
Great I will do a full reset. But when you say modded Odin is the prince comsey Odin?
Click to expand...
Click to collapse
I'm not sure what exactly is Comsy, I read about it but I guess this was an older version, I used the patched version linked in one of my previous posts and works like a charm. I switch from N950U to N950U1 and I had any trouble doing this procedure. About keep your data if you use Home_CSC you will preserve it but you need to delete your old CSC that is where go the preferences of a carrier, so you have to use CSC_oyn file instead
SubwayChamp said:
Use the modded Odin mentioned.
You can keep your data but in this case you will go to switch to a different firmware so is better that you do a backup with SmartSwitch and them go to recovery, do a format/factory reset , then in Odin flash the firmware, reboot and restore your data
Click to expand...
Click to collapse
Tried your method, now getting OTA updates, Thank you!!
Now I am getting "Sprint OMADM" verification stuff can you please ink me to a firmware with no carrier ?
ahmedmaklai said:
Tried your method, now getting OTA updates, Thank you!!
Now I am getting "Sprint OMADM" verification stuff can you please ink me to a firmware with no carrier ?
Click to expand...
Click to collapse
If you are not using a Sprint sim and your device is not a locked carrier (under contract) this message can't appear.
If you follow all the steps, factory resetting first in recovery, then flashing the CRL2 firmware including CSC_oyn then the bloat from the carrier has to be deleted.
It's probably too that you backed up settings with Smart Switch and then restored it, if this is the case try by factory resetting again and restore your backup but not your settings, also check any app related with sim provider that you backed up avoiding restore it.
Need help please
SubwayChamp said:
You have a branded device but not linked with any carrier in US. Change your firmware to an unbranded one and from CRL2 you will receive the last oreo stable CSA1 or you can download the firmware directly from an app like Updato from Google Play and wait that a beta stable on pie will be released.
Click to expand...
Click to collapse
Hi, like Ahmed I also have a SM-N950U XAA/XAA/SPR. My note 8 is not receiving OTA update and it seems like it never will (writing on 01-Apr-2019). Its probably because im using it in Pakistan. Im fairly new to the OTA and manual OS flashing thing. I dont understand any CRL2 or 3 whatever it is.. I would really appreciate if i could get a step by step guide about how to do it since im going to be making a transition from Nougat to Oreo (Or pie of possible). Please please i would really appreciate your help. as i dont want to brick my phone and i dont know what to do.
Thanks a bunch.
360fluX said:
Hi, like Ahmed I also have a SM-N950U XAA/XAA/SPR. My note 8 is not receiving OTA update and it seems like it never will (writing on 01-Apr-2019). Its probably because im using it in Pakistan. Im fairly new to the OTA and manual OS flashing thing. I dont understand any CRL2 or 3 whatever it is.. I would really appreciate if i could get a step by step guide about how to do it since im going to be making a transition from Nougat to Oreo (Or pie of possible). Please please i would really appreciate your help. as i dont want to brick my phone and i dont know what to do.
Thanks a bunch.
Click to expand...
Click to collapse
Well, the steps are in all the thread.
Let´s go for the obvious first; I guess actually you are not using a sim card from US so you are out of US now and then no need on any carrier´s bloat.
You need first of all switch to an unbranded firmware, it´s mean from N950U to N950U1.
If you are actually on nougat then flash this firmware that is the latest Oreo since you can upgrade after to Pie https://androidfilehost.com/?fid=1395089523397886161 Use this modded Odin to flash it https://androidfilehost.com/?fid=890129502657595813
Process to flash through Odin and switch correctly to unbranded firmware:
- First of all backup your important data using SmartSwitch (you can do it on a SDCard inside your device)
- Enable USB Debugging in developer options and OEM unlock if present.
- Go to recovery and Factory Reset/Format Data.
- Then use menu "Reboot to bootloader" to go to download mode.
- Load the files on Odin and from the two CSC choose CSC_OYN to delete/reset all the preferences, start flashing and wait PASS message.
- Reboot normally to system.
From here to upgrade to Pie go to this site https://firmware.science and complete the following: Model number: SM-N950U1 (this will be from now your model number), in Current version put the firmware ended with CRL2 (the firmware that you flashed previously) and download the first Beta ended on CSAB; move the zip onto your device and go to recovery and flash it using Update from sdcard (this could be wipe again your data).
If you want to update to the second Beta repeat the previous process; complete as Current version: firmware ended on CSAB and choose and download firmware ended on CSBB (less sized).
And finally to go to the last Beta available do the same, Current version; firmware ended on CSBB and download firmware ended on ZSC2 and flash it again using recovery updater.
It could be more Betas but not available yet on Firmware.science.
From beta firmware it´s unlikely that you receive OTA but when an Official Pie be release theoretically you have to receive them normally or if you want to receive them just now then you have to stay on Oreo CRL2 you´ll receive an Oreo OTA update CSA1 (more or less 40MB) and wait from there that an official Pie will be release.
First of all thanks a lot for getting back to me so quick i really appreciate it. Yes youre right about not using the US sim card. If you could just bare with my rookie questions a bit more.
Do i download the "firmware" and modded odin into my note 08 by following your shared links or do i have to download them into PC. If phone, then shud it be on SD card or internal storage?
Second, """Go to recovery and Factory Reset/Format Data.
- Then use menu "Reboot to bootloader" to go to download mode.
- Load the files on Odin and from the two CSC choose CSC_OYN to delete/reset all the preferences, start flashing and wait PASS message.
- Reboot normally to system."""
I only know how to enable developer mode. Thats when you tap built number. But debugger and OEM idk that. And everything you mentioned in """ how do i do it ? Whats to be done on PC and what on computer i have no clue. Youll have to guide me like a child about this i apologise.
Judging by your pie statements. Thats very techincal to do. So i believe its better off going for Oreo for now and wait for the Pie update automatically.
Thanks in advance
360fluX said:
First of all thanks a lot for getting back to me so quick i really appreciate it. Yes youre right about not using the US sim card. If you could just bare with my rookie questions a bit more.
Do i download the "firmware" and modded odin into my note 08 by following your shared links or do i have to download them into PC. If phone, then shud it be on SD card or internal storage?
Click to expand...
Click to collapse
The first firmware linked at Android File Host is Oreo, this firmware you have to flash it using Odin so download it with your pc and put it in any place of your preference onto your pc DON´T move it to your device.
Second, """Go to recovery and Factory Reset/Format Data.
Click to expand...
Click to collapse
This is indicated to make a clean flash, to delete/reset some APN preferences and some traces that came preinstalled with this device linked to a carrier.
- Then use menu "Reboot to bootloader" to go to download mode.
- Load the files on Odin and from the two CSC choose CSC_OYN to delete/reset all the preferences, start flashing and wait PASS message.
- Reboot normally to system."""
Click to expand...
Click to collapse
Unzip the firmware that you downloaded till get some files in .tar format, within these files you´ll find two CSC files, choose the CSC_OYN file and not the CSC_HOME on the CSC box and all the other files load them on every corresponding box: BL, AP, CP that you´ll find in Odin.
I only know how to enable developer mode. Thats when you tap built number. But debugger and OEM idk that. And everything you mentioned in """ how do i do it ? Whats to be done on PC and what on computer i have no clue. Youll have to guide me like a child about this i apologise.
Click to expand...
Click to collapse
No, I refer to OEM unlock option but I forgot that this option is not visible in this variant so forget it, just enable Developer Options and USB Debugging that you will find them then to tap on build number 7 times.
Here´s a tutorial about how to use Odin https://androidmtk.com/flash-samsung-stock-rom-using-odin just replace some step by the indicated here.
Judging by your pie statements. Thats very techincal to do. So i believe its better off going for Oreo for now and wait for the Pie update automatically.
Thanks in advance
Click to expand...
Click to collapse
Really is not so hard to do all this but if you´re not so familiar you can flash just the firmware linked and wait for an OTA prompt update.
I have a Note8 thats an old AT&T but currently using a Straight Talk sim and service. Been trying to upgrade from 8.0 to 9.0 but telling me no more updates are available... should i be doing something different.
erichamby said:
I have a Note8 thats an old AT&T but currently using a Straight Talk sim and service. Been trying to upgrade from 8.0 to 9.0 but telling me no more updates are available... should i be doing something different.
Click to expand...
Click to collapse
You could try a factory reset, as this can sometimes sort no OTA coming through. I think you will have to download each update released in order though.
You could just download the latest filmware for your device from SamMobile and flash the filmware with Odin (using Odin 13.3.1)
stonedpsycho said:
You could try a factory reset, as this can sometimes sort no OTA coming through. I think you will have to download each update released in order though.
You could just download the latest filmware for your device from SamMobile and flash the filmware with Odin (using Odin 13.3.1)
Click to expand...
Click to collapse
This is exactly what you need to do. If you have a u variant grab the carrier-specific copy of what carrier you are currently on. Realisitically speaking, it doesn't matter which version you grab as they're all the same, but different carriers.
My N950u wouldn't upgrade once I put a Verizon sim in it, and downloading the Verizon fw made it actually want to work. Despite researching extensively, I wasn't able to find the answer to this until I had tried it for myself.
Good luck!
I suggest using Frija tool for downloading the firmware. I have a paid account for Sammobile for fast downloads and it still takes 5hrs. Frija takes minutes.
Sent from my SM-N975U using Tapatalk
butchieboy said:
I suggest using Frija tool for downloading the firmware. I have a paid account for Sammobile for fast downloads and it still takes 5hrs. Frija takes minutes.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Tried your way but Frija cant find the update. SM-N950U CSC=OYN
vynncentm said:
This is exactly what you need to do. If you have a u variant grab the carrier-specific copy of what carrier you are currently on. Realisitically speaking, it doesn't matter which version you grab as they're all the same, but different carriers.
My N950u wouldn't upgrade once I put a Verizon sim in it, and downloading the Verizon fw made it actually want to work. Despite researching extensively, I wasn't able to find the answer to this until I had tried it for myself.
Good luck!
Click to expand...
Click to collapse
Any idea what i need here? Its an AT&T phone on a straight Talk service. https://www.sammobile.com/samsung/galaxy-note-8-us/firmware/SM-N950U/