Related
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Flash a rom through odin. You could try darky's 9.2 ressurection edition.
The problem now is I could not flash with Odin because my USB isn't working
smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin
tried that. on different comp. same problem. USB not recognized with the drivers installed
I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?
http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje
I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?
My USB device is Not Recognized. will it show on USBDeview?
Shows old usb drivers delete the lot on that port .
jje
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center
Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.
Hi all,
I have a huge problem. I dont have USB mode anymore. When I plug the phone to my PC, it doesnt ask me if I want to connect it as a storage mass. It is only charging; windows doesnt recognize a new device too, so I cant use nvflash.
Besides, I dont have the recovery mode, I cant use it to install an previous rom...
Can you help me please ?
I have the same problem on my G2x after flashing ClockWorkMod...
I had the same problem. I asked the retailer for an exchange. However, just before I returned it, the phone was plugged in to my laptop USB for charging and all of a sudden there was a notification saying that USB was connected. I had done a factory reset before this but it hadn't helped.
You could try enabling Hidden Menus and then in Port Settings try changing from AP USB to CP USB and see if it helps.
Also, try reinstalling the drivers on your computer.
Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.
Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
Is there a way to flash to the stock ROM without booting into fastboot?
I cant recognize my device through fastboot. Tried in 2 pcs, and a MAC. (Yes, I installed the drivers).
CamposMIC said:
Is there a way to flash to the stock ROM without booting into fastboot?
I cant recognize my device through fastboot. Tried in 2 pcs, and a MAC. (Yes, I installed the drivers).
Click to expand...
Click to collapse
Did you use USB 2 or USB 3? With USB 3 there a some problems sometimes.
bavmouse said:
Did you use USB 2 or USB 3? With USB 3 there a some problems sometimes.
Click to expand...
Click to collapse
Used both.
For example: The device is recognized by miflash when it is on. When I boot to fastboot, it dont recognize.
Lool i was here looking for a solution and a find one, i wanted to revert to stock but my phone wasnt bricked and i wanted to enter edl mode but my pc dont recognize, i tried a lot of thing and i came up with the idea of disable USB debuggin, i didnt think it was gonna work but i tried and now my pc recognizes my phone and i can enter to edl. PD: Sorry for my english