[Q] doubt on CSC - Samsung Galaxy Note 9 Questions & Answers

Hi, I bought a note 9 960f ds note with OXM_XME csc (Malaysia). So the firmware is multi CSC. I have updated the firmware without deleting data with October update and firmware multi-csc but based on ITV in order to change csc from XME to ITV. Now in Telephone software manager section appears XME/ITV, XME/XME. Is there a way to make it completely ITV? If I can not do it, can I have problems?
Thanks to All.

Related

Firmware change from Branded to Unbranded

Hey guys,
i've got the G800F branded by T-Mobile.
PDA G800FXXU1ANL2
CSC G800FDTM1ANL1
I would like to flash the unbranded DBT version.
PDA G800FXXU1ANL1
CSC G800FDBT1ANJ1
since i dont want to trip the knox counter i've read that flashing the same firmware wont trigger it. the last letter in the PDA / CSC code is for the version right? since the last letter in the CSC from the DBT version is "J" which is before the "L" would flashing the DBT version trigger my knox?
greetings and thx
RoXxToR said:
Hey guys,
i've got the G800F branded by T-Mobile.
PDA G800FXXU1ANL2
CSC G800FDTM1ANL1
I would like to flash the unbranded DBT version.
PDA G800FXXU1ANL1
CSC G800FDBT1ANJ1
since i dont want to trip the knox counter i've read that flashing the same firmware wont trigger it. the last letter in the PDA / CSC code is for the version right? since the last letter in the CSC from the DBT version is "J" which is before the "L" would flashing the DBT version trigger my knox?
greetings and thx
Click to expand...
Click to collapse
You won't trip the knox since it is stock Don't worry about anything. Just flash it via odin in PDA/AP section and don't forget to wipe data and cache after installing

What did I do wrong trying to change my CSC?

I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
n-j-f said:
I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-9/how-to/guide-change-note-9-csc-easy-guide-t3879473
Use search instead of creating topics saves space
simply flash desired firmware wont work, you will need to flash combination file first before that.
follow above comment will work

Not able to change CSC after June firmware

Hi Guys,
I have tried several methods and combination to change my CSC but no success yet. I have below issue :
1. I had initially DBT CSC
2. After June firmware, I changed my CSC to BTU
3. NOw i want it change to DBT but not able to do so
I installed XID (indonesian) firmware that changed my CSC but then I flashed again DBT firmware and CSC was automatic set to BTU. I didnt event got the option to select the sim service right after boot.
I tried it with different firmwares and all results in BTU.
I also tried removing sim while flashing but nothing helped. Was there any change in June firmware that permanently set by CSC to BTU no matter which firmware i flash, if it is multi csc, it is always by default set to BTU.
Hope to have some genious ideas on changing my CSC.
thanks,

Galaxy Note 9 N960F/DS Change CSC with Odin only (non root)

Hi All,
I got one device N960F/DS (Note 9) which i do not like the original CSC (Singtel @ SIN) so I manage to change to XME (Malaysia) with guide from this forum and combination of others. I will share steps as below;
1) Follow this post to get your target CSC software flash (XME for me as an example)
2) After flash do not start migrate data as you will need another round of reset device by changing the CSC using phone dialler which is *#272*IMEI number# (Your primary IMEI number).
Done.
I have Note 9 with [XSG] United Arab Emirates csc, if i changed csc to BTU, will i get ota updates.
kazimali25 said:
I have Note 9 with [XSG] United Arab Emirates csc, if i changed csc to BTU, will i get ota updates.
Click to expand...
Click to collapse
Yes

Question Change CSC One Ui 4.1

Hey there. I just got my new S21 Ultra.
My S21 Ultra has Hungarian software (XEH) installed with One Ui 4.1. How can I change the CSC to my Region DBT? I alread tried to install DBT Firmware with Odin. i used HOME_CSC and it didnt changed^^
I cannot use Samsung Pay for now^^
Mort015 said:
Hey there. I just got my new S21 Ultra.
My S21 Ultra has Hungarian software (XEH) installed with One Ui 4.1. How can I change the CSC to my Region DBT? I alread tried to install DBT Firmware with Odin. i used HOME_CSC and it didnt changed^^
I cannot use Samsung Pay for now^^
Click to expand...
Click to collapse
Home CSC can't modified but you can get some helpful flashing guidence here. Doing so may affect updates.
Change CSC from LUX to DBT
Can I change my CSC from LUX to DBT by flashing the DBT firmware (minus the HOME_CSC, so i keep my data) ? I've just ordered credits from Sammkey but I'm wondering what that is even needed if a flash via Odin will also do the trick. I want to...
forum.xda-developers.com
got an update to the one ui 4.1
but during the update it was written that I was updating to one ui 4 but it's already installed
after updating version in settings is 4.1 but nothing has changed
Samsung galaxy a52
I have an ATL device (Vodafone Spain). Apart from the one Vodafone bloatware app that I uninstall via adb, I can use my Magenta Austria SIM just fine. Everything works as intended and I assume this is due to the OXM firmware. So if you don't miss any features, I personally wouldn't bother changing the CSC
If XEH and DBT share the same multi OXM firmware, their firmware is exactly the same. Meaning flashing the DBT firmware will do nothing as it is the same one that XEH uses. The CSC will only change by that method, if you flash a firmware that doesn't have your current CSC included

Categories

Resources