Not able to change CSC after June firmware - Samsung Galaxy Note 9 Questions & Answers

Hi Guys,
I have tried several methods and combination to change my CSC but no success yet. I have below issue :
1. I had initially DBT CSC
2. After June firmware, I changed my CSC to BTU
3. NOw i want it change to DBT but not able to do so
I installed XID (indonesian) firmware that changed my CSC but then I flashed again DBT firmware and CSC was automatic set to BTU. I didnt event got the option to select the sim service right after boot.
I tried it with different firmwares and all results in BTU.
I also tried removing sim while flashing but nothing helped. Was there any change in June firmware that permanently set by CSC to BTU no matter which firmware i flash, if it is multi csc, it is always by default set to BTU.
Hope to have some genious ideas on changing my CSC.
thanks,

Related

[Q] doubt on CSC

Hi, I bought a note 9 960f ds note with OXM_XME csc (Malaysia). So the firmware is multi CSC. I have updated the firmware without deleting data with October update and firmware multi-csc but based on ITV in order to change csc from XME to ITV. Now in Telephone software manager section appears XME/ITV, XME/XME. Is there a way to make it completely ITV? If I can not do it, can I have problems?
Thanks to All.

Changing CSC in a OXM with Odin

Hi, since the combination file method of changing CSC no longer works, is there any other way of changing csc within OXM (from 1 csc in oxm to another in oxm) using Odin? Since I heard that the sim card method doesn't always work. Thanks in advance!
I have also heard you can flash something outside of oxm and flash back in, but then how will you select which csc in oxm to use? Thanks so much

What did I do wrong trying to change my CSC?

I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
n-j-f said:
I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-9/how-to/guide-change-note-9-csc-easy-guide-t3879473
Use search instead of creating topics saves space
simply flash desired firmware wont work, you will need to flash combination file first before that.
follow above comment will work

Change CSC within multi-CSC

HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP
wire.rat said:
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP
Click to expand...
Click to collapse
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion
gazw68 said:
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion
Click to expand...
Click to collapse
It should prompt you, but you can also try resetting in the recovery menu. I have always used IMEI 1 with 272
Worked for me!!!
gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!
rodrigoger said:
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!
Click to expand...
Click to collapse
How?
Luke301 said:
How?
Click to expand...
Click to collapse
Once you flash a Multi-CSC and your active SIM is within the said list then it would restart and make the changes.
So if you want to move to a different CSC then just use a different SIM that has the specific you need.

Samsung SM-G975F/DS CSC update not happening

I got my new SM-G975F/DS and it is showing CSC as TPA/TPA, TPA/TPA, though I am using a US sim and an Indian sim. I flashed the latest INS firmware by ODIN and firmware download through Samfirm, but there is no change in the CSC. I used CSC file started with only CSC, not with the 'HOME_CSC'.
When tried to flash only CSC file though ODIN, I am getting an error (attached).
Is there any relation with the OEM_unlocking during flashing? I have NOT changed it from the default setting; if changed and flashed will it cause KNOX to be void?
I do not want to void my KNOX. Any help to change the CSC will be very helpful.
Update: I finally got the CSC updated. I took the risk of flashing the latest Firmware of desired CSC through ODIN by unlocking OEM_unlocking and it is done. Also, the KNOX is remaining valid.
Thank you.

Categories

Resources