Hi, since the combination file method of changing CSC no longer works, is there any other way of changing csc within OXM (from 1 csc in oxm to another in oxm) using Odin? Since I heard that the sim card method doesn't always work. Thanks in advance!
I have also heard you can flash something outside of oxm and flash back in, but then how will you select which csc in oxm to use? Thanks so much
Related
I've just bought an N960F/DS 512Gb from what seems to be a reputable ebay seller and it is on its way to me. I believe it will come with Singapore Global firmware.
The N960F is not available in my region (only the N9600) so I am thinking of changing the firmware to stock UK BTU. Can I just install stock UK BTU firmware on it using Odin without causing any issues or tripping Knox?
Do I need to check the Re-partition box in Odin? I read somewhere that maybe I should but I had thought I should avoid doing that.
My local CSC is TPA. How can I check whether that is included in the multiCSC that I believe will be on the phone? How also to check if it is in the BTU CSC?
If TPA is already in the firmware, should I just install the AP, BL and CP from the BTU firmware and leave the CSC alone?
TIA
Edit: I see OXM is in the BTU CSC and I believe that includes TPA so I guess I can install the whole of BTU including the CSC.
n-j-f said:
I've just bought an N960F/DS 512Gb from what seems to be a reputable ebay seller and it is on its way to me. I believe it will come with Singapore Global firmware.
The N960F is not available in my region (only the N9600) so I am thinking of changing the firmware to stock UK BTU. Can I just install stock UK BTU firmware on it using Odin without causing any issues or tripping Knox?
Do I need to check the Re-partition box in Odin? I read somewhere that maybe I should but I had thought I should avoid doing that.
My local CSC is TPA. How can I check whether that is included in the multiCSC that I believe will be on the phone? How also to check if it is in the BTU CSC?
If TPA is already in the firmware, should I just install the AP, BL and CP from the BTU firmware and leave the CSC alone?
TIA
Edit: I see OXM is in the BTU CSC and I believe that includes TPA so I guess I can install the whole of BTU including the CSC.
Click to expand...
Click to collapse
odin stock settings will do.
fill up all slots.
selecting csc.md5 over home_csc.md5 in the csc slot will wipe data
i have note 9 with Malaysian firmware and i am in Pakistan now can i flash it too without any problem?
bober10113 said:
odin stock settings will do.
fill up all slots.
selecting csc.md5 over home_csc.md5 in the csc slot will wipe data
Click to expand...
Click to collapse
Thanks. As I'm switching firmware, I will be using CSC instead of Home_csc. So do I tick the Repartition box?
n-j-f said:
Thanks. As I'm switching firmware, I will be using CSC instead of Home_csc. So do I tick the Repartition box?
Click to expand...
Click to collapse
if i remember correctly since pit file is in csc.md5 it will auto tick itself? load it and see.
To be safe, NEVER tick the repartition box. Since using Odin on the S4, S6,S7,S8,Note8, S9,& Note 9 I've never selected that option.
n-j-f said:
Thanks. As I'm switching firmware, I will be using CSC instead of Home_csc. So do I tick the Repartition box?
Click to expand...
Click to collapse
Sent from my ONEPLUS A6003 using Tapatalk
bober10113 said:
if i remember correctly since pit file is in csc.md5 it will auto tick itself? load it and see.
Click to expand...
Click to collapse
I have checked and Odin does not automatically check the Repartition box when I add the CSC file. So I guess I leave it unticked?
n-j-f said:
I have checked and Odin does not automatically check the Repartition box when I add the CSC file. So I guess I leave it unticked?
Click to expand...
Click to collapse
yeah play it on the safe side.
but if you look at the log window i belive the pit file gets parsed anyways.
I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
n-j-f said:
I received my international version of the N960F/DS. It had XEU firmware. I tried to install BTU firmware via Odin using a SamFirm BTU download and a UK Giffgaff SIM and selecting CSC, not Home_CSC. I still ended up with XEU.
1st question - am I likely to get Pie and other updates more quickly on BTU than XEU?
2nd question - how do I change from XEU to BTU? I think I saw that on previous Galaxies maybe you had to install a firmware not on the OXM multi CSC and then install BTU afterwards. Is that what I should have done? If so, what CSC do you suggest?
3rd question - should I just leave it alone?
TIA.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-9/how-to/guide-change-note-9-csc-easy-guide-t3879473
Use search instead of creating topics saves space
simply flash desired firmware wont work, you will need to flash combination file first before that.
follow above comment will work
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP
wire.rat said:
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP
Click to expand...
Click to collapse
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion
gazw68 said:
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion
Click to expand...
Click to collapse
It should prompt you, but you can also try resetting in the recovery menu. I have always used IMEI 1 with 272
Worked for me!!!
gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!
rodrigoger said:
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!
Click to expand...
Click to collapse
How?
Luke301 said:
How?
Click to expand...
Click to collapse
Once you flash a Multi-CSC and your active SIM is within the said list then it would restart and make the changes.
So if you want to move to a different CSC then just use a different SIM that has the specific you need.
Hi Guys,
I have tried several methods and combination to change my CSC but no success yet. I have below issue :
1. I had initially DBT CSC
2. After June firmware, I changed my CSC to BTU
3. NOw i want it change to DBT but not able to do so
I installed XID (indonesian) firmware that changed my CSC but then I flashed again DBT firmware and CSC was automatic set to BTU. I didnt event got the option to select the sim service right after boot.
I tried it with different firmwares and all results in BTU.
I also tried removing sim while flashing but nothing helped. Was there any change in June firmware that permanently set by CSC to BTU no matter which firmware i flash, if it is multi csc, it is always by default set to BTU.
Hope to have some genious ideas on changing my CSC.
thanks,
Hi there, there is a lot of generic firmware, or OXM firmware, but doesn't matter which one I flash I always get Telestra, even tho original CSC was TIM, I can easly flash it with with network branded firmware and csc changes, but OXM always comes up as Telestra. Does anybody know a firmware that will give me generick uk or germany? Or is there a way to change csc through AT commands ?
Tia