I rooted my s8 plus yesterday and it worked fine. Today I tried to install a YouTube Vanced module, and on the magisk it showed me that it was installed. But after I rebooted my phone I saw that nothing has changed.
I also tried downloading other modules and it didnt work at all. Does anybody know how to solve it? Magisk v17.1
About YouTube Vanced: did you uninstall updates for the YouTube app? And make sure to turn off automatic updates for it or it'll just update and mess up Vanced...
What other modules are you talking about and what do you mean when you say that they don't work at all.
Also, logs are usually very informative when asking for assistance.
Related
Hi everyone,
I am pretty new to rooting, flashing, modding etc.
My problem is as follows:
I am on Pie 10.0.1.0PDIMIFJ, upgraded to it thanks to a guide in this forum.
After upgrading (bootloader has been unlocked beforehand of course) I got root through patched boot.img and Magisk Manager.
I did this in order to be able to gain some everyday treats such as Youtube background playing and especially V4A.
I could install these modules via Magisk, but they do not seem to work.
V4A is asking for driver installation everytime I reboot my phone, and I have to reboot after every driver installation.
This happens independently from the version of Viper I am trying to install.
After installing Youtube Vanced nothing changes. Playing stops when closing the app while a video is turned on.
I also tried a couple of other modules but none seems to be working.
I read somewhere that this could be connected to "SELinux permissive" something . I am sorry, I do not really know what that's about but maybe someone out there could give me a hint as to where I have to look.
I do not need a guide or anything, don't mind learning something on the way
Help would be greatly appreciated.
Thank you guys in advance
Anyone?
Same/similar issue
I am also experiencing the same issue, was able to install Viper and pixel Camera mod, then after no matter what module I install it does not show up in the app drawer atleast, I tried App systemizer , Cloudfare DNS and SF font.. nothing seems to work than the first installed two modules. Tried to install and remove them multiple times.
Cleared magisk cache
installed M<agisk from TWRP multiple times.
tried to install modules from TWRP as well.
I am so new to all these, please dont mind any mistakes.
Thanks.
The same problem I got.How to do to enable camera 2api.
So I had trouble installing Viper through Magisk on Pie on my Exynos Note 9. It always told me to reinstall the drivers, but that didn't seem to work.
But I found a solution:
On XDA-Labs is a new version of viper available (Version 2.6):
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Simply install this version (I chose the beta), give it root permissions and you are set!
I also installed audio modification lib from Magisk to be on the safe side.
Only issue I noticed is that YouTube videos seem to hang for a few seconds before they start playing (I am using YouTube vanced from Magisk). Apart from that everything seems to be working well!
Hope that helps everyone who is having trouble on Pie!
It isn't asking me for root permission?
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Rowe90 said:
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Click to expand...
Click to collapse
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
aussiesausage said:
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
Click to expand...
Click to collapse
Yeah it needs root to put itself into some system files.
I just saw they released an update yesterday which is know marked as stable. (version 2.7). Maybe you have better luck with that.
It was working on 2.7 but it suddenly stopped
Now it's not enabled and not processing
Don't know how to fix
(Btw on Samsung Galaxy A8)
This was the only thing that worked. I've been trying different things and searching for hours. The stable version does not work on my exynos note 9. The beta does though!
MagiskHide didn't wotk so I used Hide Magisk Manager feature. It works fine but then I encounter several problems after I used that feature. Magisk is v20.0 and Magisk Manager v7.3.5 (the latest).
My phone is Xiaomi Redmi 4X with custom ROM from AospExtended v6.7 (Android Pie 9.0).
- Youtube (or specifically Vanced) doesnt appear at all in the app drawer. I've tried reinstalling & rebooting several times using Magisk Manager but it still doesn't appear. I even installed 2 Vanced modules from Magisk Manager but I still cant find either of those in the app drawer. But then, I tried uninstalling those modules, it tells me to reboot, right? I reboot my phone but none of those are uninstalled. Both of them are still in the Magisk Module with "module will be removed at the next reboot" warning even AFTER rebooting my phone!
I also tried installing Vanced manually with the non-root version but the app wont install. Basically, I cant use Youtube at all!
- This problem with Magisk Module doesnt only happen in Vanced. I think it also happens in other module. My Blobmoji is installed but the emoji I have isn't the blobmoji, it's the built in one instead.
- I dont know if this is related but the wifi won't connect at all. It just keeps "searching" for connetion despite my home has 2 wifi routers.
It might be related, it might be not, but I've used this custom ROM for nearly a year and I havent faced any wifi problem at all. There was no major update from the ROM from the last few weeks either. Coincidentally, this problem happens after this Hide Magisk Manager fiasco, thats why I put this one here.
What happens? What should I do?
Hey guys. I've searched all over but unable to find this specific issue mentioned anywhere.
I've got a K20 Pro Global version updated to 11.0.4 and rooted with Magisk. I've always passed the Basic Integrity check in magisk but for some reason I suddenly appear to be failing it. Screenshot attached?
Is there anyway to fix this? I've read that the cts profile will no longer pass but can't see anything about the Basic failing as well.
Would appreciate any help to get this fixed.
shajman said:
Hey guys. I've searched all over but unable to find this specific issue mentioned anywhere.
I've got a K20 Pro Global version updated to 11.0.4 and rooted with Magisk. I've always passed the Basic Integrity check in magisk but for some reason I suddenly appear to be failing it. Screenshot attached?
Is there anyway to fix this? I've read that the cts profile will no longer pass but can't see anything about the Basic failing as well.
Would appreciate any help to get this fixed.
Click to expand...
Click to collapse
Have you read discussions in general Magisk thread
- Which Magisk modules you use, do you update them regularly
Disable all modules, reboot and test again
Then enable modules one by one (reboot and test) to find the culprits
zgfg said:
Have you read discussions in general Magisk thread
- Which Magisk modules you use, do you update them regularly
Disable all modules, reboot and test again
Then enable modules one by one (reboot and test) to find the culprits
Click to expand...
Click to collapse
Hey there. Attached are the modules I use. I check twice a week for updates and currently everything is updated.
shajman said:
Hey there. Attached are the modules I use. I check twice a week for updates and currently everything is updated.
Click to expand...
Click to collapse
As said, disable all your modules as well as remove Xposed if you have and test SF again
BB, V4A, AML are safe (I have them, and SafetyNet is green).
If on stock, you really don't need MHPC (no need to and better don't fake the device fingerprint) - only if needed for CN firmwares (don't know)
Riru and Xposed are likely questionable, check in Magisk thread, people recently had Basic Integrity failures with them, I think there was a workoround
zgfg said:
As said, disable all your modules as well as remove Xposed if you have and test SF again
BB, V4A, AML are safe (I have them, and SafetyNet is green).
If on stock, you really don't need MHPC (no need to and better don't fake the device fingerprint) - only if needed for CN firmwares (don't know)
Riru and Xposed are likely questionable, check in Magisk thread, people recently had Basic Integrity failures with them, I think there was a workoround
Click to expand...
Click to collapse
Thanks for this. Funny enough I installed MHPC to try and fix the issue. So it existed before that install.
Riru I only installed yesterday to try and get Youtube Vanced installed. Xposed haven't installed.
I'm actually scared to disable the V4A module coz the last time I tried to u install it via Magisk my phone would no longer reboot and kept automatically going to fast boot.
I will check the Magisk thread and see if I can figure this out. Thanks for that.
A quick question. Does your YouTube switch to HDR when playing an HDR video? Mine used to but is no longer working.
So just wondering if Safetynet not passing is the reason.
shajman said:
Thanks for this. Funny enough I installed MHPC to try and fix the issue. So it existed before that install.
Riru I only installed yesterday to try and get Youtube Vanced installed. Xposed haven't installed.
I'm actually scared to disable the V4A module coz the last time I tried to u install it via Magisk my phone would no longer reboot and kept automatically going to fast boot.
I will check the Magisk thread and see if I can figure this out. Thanks for that.
A quick question. Does your YouTube switch to HDR when playing an HDR video? Mine used to but is no longer working.
So just wondering if Safetynet not passing is the reason.
Click to expand...
Click to collapse
For Vanced you don't need Riru, see my modules previously attached and the new attachment
shajman said:
Thanks for this. Funny enough I installed MHPC to try and fix the issue. So it existed before that install.
Riru I only installed yesterday to try and get Youtube Vanced installed. Xposed haven't installed.
I'm actually scared to disable the V4A module coz the last time I tried to u install it via Magisk my phone would no longer reboot and kept automatically going to fast boot.
I will check the Magisk thread and see if I can figure this out. Thanks for that.
A quick question. Does your YouTube switch to HDR when playing an HDR video? Mine used to but is no longer working.
So just wondering if Safetynet not passing is the reason.
Click to expand...
Click to collapse
Well consider yourself lucky. The magisk module you have installed is the old version. My YouTube got updated to the official one (my mistake) and when I tried to reinstall the YouTube vanced via Magisk noticed that it was no longer there. Read up on it and found out that Vanced has been removed from Magisk
To install the new version Riru was one of the requirements.
With regards to the YouTube image you sent me, it shows the HDR for me as well. What I meant was that the display does not auto switch to HDR. The image remains full whereas earlier the brightness (nits) would automatically shoot up to max
shajman said:
Read up on it and found out that Vanced has been removed from Magisk
To install the new version Riru was one of the requirements.
With regards to the YouTube image you sent me, it shows the HDR for me as well. What I meant was that the display does not auto switch to HDR. The image remains full whereas earlier the brightness (nits) would automatically shoot up to max
Click to expand...
Click to collapse
The last Vanced module I updated from Magisk repo was v14.21.54 and Riru is not (never has been) needed.
I can give you a download link if you want to install
From your previous attachment you don't run Vanced module but maybe their apk - you say it requires Riru now (?)
Where can I see exactly if HDR is playing as HDR or not?
Btw, check eg by DRM Info do you have Widevine L1
zgfg said:
The last Vanced module I updated from Magisk repo was v14.21.54 and Riru is not (never has been) needed.
I can give you a download link if you want to install
Click to expand...
Click to collapse
Yes please. I've always had it installed via the Magisk repo. But as stated earlier, I updated youtube by mistake via the play store. Usually I just uninstall the update and Vanced is back in. But this time it didn't. When I went back to Magisk it was no longer available. It's then that I read that Magisk support has stopped as the new version can no longer be installed through it.
zgfg said:
From your previous attachment you don't run Vanced module but maybe their apk - you say it requires Riru now (?)
Click to expand...
Click to collapse
It was via the module. But like I said above it just disappeared.
zgfg said:
Where can I see exactly if HDR is playing as HDR or not?
Btw, check eg by DRM Info do you have Widevine L1
Click to expand...
Click to collapse
I do have L1. The best way I can explain it is with this youtube video. Exactly the same issue.
https://youtu.be/jqs5yrwcUI0?t=273
I did the same as the video. Downloaded an HDR video of something that was on youtube (in HDR) and played it via MX Player. Night and day difference.
However I'm starting to wonder if the reason it worked before is because I was on Vanced.
And before I forget...your tip worked!! Along with Riru and MHPC, I removed Detach, Ainur Narsil and FDE.AI from magisk and rebooted. Lo and behold the safetynet now passes with flying colors!!! I'm not sure which one was the culprit but it worked. Thank you!
shajman said:
Yes please. I've always had it installed via the Magisk repo. But as stated earlier, I updated youtube by mistake via the play store. Usually I just uninstall the update and Vanced is back in. But this time it didn't. When I went back to Magisk it was no longer available. It's then that I read that Magisk support has stopped as the new version can no longer be installed through it.
Click to expand...
Click to collapse
You can find the Vanced module on my Mega:
https://mega.nz/folder/hllnSIpA#amAG8moMYW_tG8r731Tzgg
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
shajman said:
Exactly the same issue.
?t=273
I did the same as the video. Downloaded an HDR video of something that was on youtube (in HDR) and played it via MX Player. Night and day difference.
Click to expand...
Click to collapse
I will check myself
Edit:
When playing with MiXplayer (part of MiXplorer), colors are poor.
With Mi Video - beautiful.
With Vanced module, I'm not 100% sure is it the same quality as with Mi Video
I got a new banking app today that detects root, its https://play.google.com/store/apps/details?id=no.vipps.bankid
no problem with the Swedish bankid or other Norwegian banking apps. google pay/wallet works.
I tried blocking it in magisk block list. then with Shamiko, I'm afraid to test too many thing since google wallet is working now.
Try this modified USNF module. The issue you may be having is the new Play Integrity API.
I tried the previous version and now this one, still the same. I'm in no hurry to fix it, all other stuff work and the old bankid solution works 2 more years I think (hope)
I'm in your exact same position.
I have the MagiskHide module and used the DenyList, I also tried Shamiko, no luck for this app.
I tried the modified USNF module and no luck either.
I have several other apps where the above methods to avoid detection are working without problems, but not this one.
In the same boat as you guys. Also tried the modified magisk delta project with the old magisk hide, no luck.
Where is this?
SafetyNet is good, all other banking-and wallet-apps is working. RootBeer is not detecting root.
Oneplus 7t pro, stock latest stable rom. Magisk delta. Hide root from all apps. Renamed magisk app.
same problem here. tried everything i could find and no luck. might be a DRM problem? because 1 other issue i cant fix is apps like Netflix and prime video which are currently unusable because of DRM.
My app was updated today, and immidiatly after the update I tried activating/logging in, and to my surprise it worked. There is a one hour grace/waiting period to activate, and I'm currently waiting for that.
If it is not working after the wait, I will update this post. So if no update, it is working.
See my previous post in this thread about my setup.
jale said:
My app was updated today, and immidiatly after the update I tried activating/logging in, and to my surprise it worked. There is a one hour grace/waiting period to activate, and I'm currently waiting for that.
If it is not working after the wait, I will update this post. So if no update, it is working.
See my previous post in this thread about my setup.
Click to expand...
Click to collapse
same for me. so its probably okay for everyone for now. disable auto update on it now hahaha and lets hope it stays that way.
Can confirm, it works now without any change to Magisk or other modules.
I waited the 1h period and after that I was able to activate it and use it to login.
I am using Shamiko and a modified USNF module, but probably are not required.
Great to know that it's working now. But, for next time i can give u guyz some more option to keep in mind:
**renaming/deleting the "twrp/fox" folder of the recovery, deleting all files related to magisk or xposed. Also, hiding developer mode option by "devoptshide" from lsposed. **