Hello,
I still try to recover my motorola razer i XT890.
Now we will do it in a worse state, wrongly overwrote the cid partition
My phone was with bootloader unlocked but when I lost that partition
I'm blocked. It does not get to start neither in normal mode nor in bp tool always it is marked in the logo of intel, it does not have adb activated. I have backup of the original partition but fast does not let me write it for lack of permissions.
I was able to flash with a STOCK version I can enter the recovery
I made an update.zip file with this content:
updater-script
Code:
ui_print("Installing update.zip");
package_extract_file("cid.img", "/dev/block/mmcblk0p7");
ui_print("Flashed update.zip successfully");
Since it is not signed, it does not work.
This is the output I get from fastboot getvar all
Code:
bash-4.3# fastboot getvar all
(bootloader) version-bootloader: 0x2025
(bootloader) product: smi
(bootloader) secure: yes
(bootloader) rom-key: motorola-key
(bootloader) model-id: 0268
(bootloader) cid: dead
(bootloader) version: 0.5
(bootloader) uid: CFDE99E41C23C94DF17472715D60
(bootloader) max-download-size: 104857600
(bootloader) emmc-size: 8GB
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) is-warranty-void: Not supported
(bootloader) ifwi: 42.26
(bootloader) cpu: Intel(R) Atom(TM) CPU Z2480 @ 2.00GHz
(bootloader) kernel: droidboot
(bootloader) battery: capacity: 100, voltage: 4320000, temperature: 370
(bootloader) modem-status: secure
all:
Finished. Total time: 0.336s
as you can see it says cid: dead
Any idea is well received
Thank you
Sorry for my English.
*
Related
I have non-booting xt890 from South America (bought used in Europe, I think originally Argentina).
The phone stopped booting past the M logo (no idea why, it just started one day) so I tried to flash a stock Rom using RSD lite. It now boots to fastboot mode with "Fastboot Mode: Flash Failure"
I can access the phone using fastboot with "Minimal ADB and Fastboot". I want to unlock the bootloader so I can install a recovery and then flash Cynagonmod or another ROM or something to see if I can fix the phone.
I used the tool on the Motorola site and I get an error "Your device does not qualify for bootloader unlocking". I emailed the support but got no response.
Is this correct? If I run "fastboot getvar all" I get:
(bootloader) version-bootloader: 0x2025
(bootloader) product: smi
(bootloader) secure: yes
(bootloader) rom-key: motorola-key
(bootloader) model-id: 0268
(bootloader) cid: c
(bootloader) version: 0.5
(bootloader) uid: [redacted]
(bootloader) max-download-size: 104857600
(bootloader) emmc-size: 8GB
(bootloader) qe: qe 0/0
(bootloader) unlocked: no
(bootloader) is-warranty-void: no
(bootloader) ifwi: 42.26
(bootloader) cpu: Intel(R) Atom(TM) CPU Z2480 @ 2.00GHz
(bootloader) kernel: droidboot
(bootloader) battery: capacity: 62, voltage: 3884375, temperature: 310
(bootloader) modem-status: secure
all:
finished. total time: 0.371s
try to flash the ORIGINAL STOCK ROM of your Ri (the one that came's with the phone) with RDS Lite 6.1.5 and them unlock the bootloader to flash any other rom
chers
C:\Program Files\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version-bootloader: 0x2025
(bootloader) product: smi
(bootloader) secure: yes
(bootloader) rom-key: motorola-key
(bootloader) model-id: 0268
(bootloader) cid: 7
(bootloader) version: 0.5
(bootloader) uid: EA0810581BE82479A6CBD765E7C9
(bootloader) max-download-size: 104857600
(bootloader) emmc-size: 8GB
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) is-warranty-void: no
(bootloader) ifwi: 42.26
(bootloader) cpu: Intel(R) Atom(TM) CPU Z2480 @ 2.00GHz
(bootloader) kernel: droidboot
(bootloader) battery: capacity: 44, voltage: 3745625, temperature: 370
(bootloader) modem-status: secure
all:
finished. total time: 0.359s
whats is the correct rom ?
Can't be seen from here I think. Almost every stock rom works on it.
The device also has been unlocked in the past (if u didn't noticed it)
i am getting error on Boot.img ...
Failed Flashing Process. 6/13 flash boot "boot_signed" -> Phone returned FAIL.
Did u get it in a working state? What if u try to flash everything manually?
Hello. i've got razr i with stock 4.4.2 eu. android version. absolutely stock.
once i've waked up and seen mistake message from GP servises and viber. it was looping window. I've decided to reboot my phone, but it's nothing heppens after M logo.
I can enter fastbooth with pressing Vol - and connecting USB to PC.
So.
this is my log from fastboot
(bootloader) version-bootloader: 0x2025
(bootloader) product: smi
(bootloader) secure: yes
(bootloader) rom-key: motorola-key
(bootloader) model-id: 0268
(bootloader) cid: 7
(bootloader) version: 0.5
(bootloader) uid: 02024F9481610C97587432F726DA
(bootloader) max-download-size: 104857600
(bootloader) emmc-size: 8GB
(bootloader) qe: qe 0/1
(bootloader) unlocked: no
(bootloader) is-warranty-void: no
(bootloader) ifwi: 42.26
(bootloader) cpu: Intel(R) Atom(TM) CPU Z2480 @ 2.00GHz
(bootloader) kernel: droidboot
(bootloader) battery: capacity: 92, voltage: 4223125, temperature: 250
(bootloader) modem-status: secure
all:
finished. total time: 0.358s
I've tryed to unlock bootloader, but it's failed
C:\RAZRi_Root_Windows>fastboot oem unlock YD2NIQNLLXYYM6Y4LNPX
...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
(bootloader) Erase userdata fail
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
finished. total time: 8.472s
No result if i wright in cmd fastboot erase userdata
Mistake and failed on flashing with RSD on step Erase Used Data
Unbriking doesn't help too.
What am i doing wrong?
Good morning friends! I have a problem that has become painful for me these past few days! I took my moto g7 xt1962-4 (river) and installed a PixelExperience recovery and a rom for this build.
Version: 10
File name: PixelExperience_river-10.0-20201123-1209-OFFICIAL.zip
MD5 hash: 4f9130df18136891e982baa925fc9bc6
Date: November 23, 2020 12:09 UTC
Downloads: 121
However after installing the recovery and finalizing the installation of the zip (ROM) my device restarted and remained on fastboot, I tried to use the minimal adb to repair the device, I tried to use rsd to repair the device, and I also used the tool lenovo repair, if anyone knows what is happening, thank you. Below I will leave the reading of getvar all.
(before installing the rom the bootloader was unlocked and now the oem_locked status)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 1056de9d
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.113s
C:\Program Files (x86)\Minimal ADB and Fastboot>
João Pedro Cordeiro said:
Good morning friends! I have a problem that has become painful for me these past few days! I took my moto g7 xt1962-4 (river) and installed a PixelExperience recovery and a rom for this build.
Version: 10
File name: PixelExperience_river-10.0-20201123-1209-OFFICIAL.zip
MD5 hash: 4f9130df18136891e982baa925fc9bc6
Date: November 23, 2020 12:09 UTC
Downloads: 121
However after installing the recovery and finalizing the installation of the zip (ROM) my device restarted and remained on fastboot, I tried to use the minimal adb to repair the device, I tried to use rsd to repair the device, and I also used the tool lenovo repair, if anyone knows what is happening, thank you. Below I will leave the reading of getvar all.
(before installing the rom the bootloader was unlocked and now the oem_locked status)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 1056de9d
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.113s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
When the bootloader changes from unlocked to lock by itself or after flashing a rom, only fix I've seen is.
Booting to EDL Mode
Try
Code:
fastboot oem blankflash
If you can boot a custom recovery like TWRP
see reboot options for EDL
or use
Code:
adb reboot edl
With twrp booted.
If device is in Emergency Download Mode (EDL Mode)
Screen will be black and will be shown as Qualcomm device on PC
i also faced this problem when i flash the lineageos, this is a low version bootloader and cannot turn to edl mode, i use TinyFastbootScript fix this issue.
get a stock rom and flash the BP/BL.
net time you'd better install the copy-partitions-20200903_1329.zip before flash a new custom rom.
I managed to get him to go to edl and use blankflash but still no ah how to install twrp or firware
I bought another plate for the device, I thank everyone on the forum for their attention, you are excellent people, and now we have a story about a brick
sd_shadow said:
When the bootloader changes from unlocked to lock by itself or after flashing a rom, only fix I've seen is.
Booting to EDL Mode
Try
Code:
fastboot oem blankflash
If you can boot a custom recovery like TWRP
see reboot options for EDL
or use
Code:
adb reboot edl
With twrp booted.
If device is in Emergency Download Mode (EDL Mode)
Screen will be black and will be shown as Qualcomm device on PC
Click to expand...
Click to collapse
everything worked fine on EDL but it still doesn't work, I can put it in qualcomm mode but I didn't succeed
João Pedro Cordeiro said:
everything worked fine on EDL but it still doesn't work, I can put it in qualcomm mode but I didn't succeed
Click to expand...
Click to collapse
you mean the phone can worked on EDL mode but you cannot use blankflash function?
blankflash - mirrors.lolinet.com > firmware > motorola > lake > blankflash
make sure the edl driver has been installed and check the 9008 mode shown in the device manager.
after the blankflash the phone can be set to bootloader mode, then you can do other trying.
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
Click to expand...
Click to collapse
Sometimes the bootloader will relock, when using a custom recovery is used.
I'm not sure why usually when trying to install a rom.
It's very common, but it happens on many Moto devices.
enricocava said:
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
Click to expand...
Click to collapse
That will have made it worse.
enricocava said:
But all fail with "failed validation";
Unlocking fails with "Please allow OEM unlock from developer options", but Android is not booting so I cannot change it.
RSD Lite to flash stock ROM doesn't see my device.
Click to expand...
Click to collapse
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
enricocava said:
Rescue and Smart Assistant cannot proceed due to "missing base version" (string is not correct, I'll chek it later).
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Thank you for your quick reply.
sd_shadow said:
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
Click to expand...
Click to collapse
Colud it work on a Win7 on a Virtual machine or does it need direct access to USB ports? At the moment I have not an old Windows available.
sd_shadow said:
What does getvar all say?
Click to expand...
Click to collapse
I updated the original post.
sd_shadow said:
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I missed this post, I'll take a look.
enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.
sd_shadow said:
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.
Click to expand...
Click to collapse
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341
enricocava said:
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
Click to expand...
Click to collapse
I believe so
enricocava said:
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341
Click to expand...
Click to collapse
Do not downgrade unless the bootloader says unlocked again.
If the bootloader is reported as unlocked again,
sure you should be able to downgrade the firmware.