The notification on the Samsung Members app for the pie update changed from January to March - anyone else get this??View attachment 4688025
Sent from my SM-N9600 using Tapatalk
Still says January-2019 here.
Arkangel786 said:
The notification on the Samsung Members app for the pie update changed from January to March - anyone else get this??View attachment 4688025
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
Got the same here.... Shame...
Enviado de meu SM-N9600 usando o Tapatalk
Arkangel786 said:
The notification on the Samsung Members app for the pie update changed from January to March - anyone else get this??View attachment 4688025
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
Witch region you in ? Also why not do the update manually ? it's so easy?
Last I read it was moved back for the Note 9 to February 1st, Note 8 in Beta!
N1NJATH3ORY said:
Witch region you in ? Also why not do the update manually ? it's so easy?
Click to expand...
Click to collapse
N1NJATH3ORY said:
Witch region you in ? Also why not do the update manually ? it's so easy?
Click to expand...
Click to collapse
I'm in the UK but I have the N9600 which was imported from Hong Kong.
Do you have a link to show how & where I can update??
Sent from my SM-N9600 using Tapatalk
N1NJATH3ORY said:
Witch region you in ? Also why not do the update manually ? it's so easy?
Click to expand...
Click to collapse
I'm using this version: N9600ZHS1ARL4/N9600OWO1ARK1/N9600ZCU1ARK1, can I do the manual update to beta?
Thank you!
Arkangel786 said:
I'm in the UK but I have the N9600 which was imported from Hong Kong.
Do you have a link to show how & where I can update??
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
if your firmware matches below guide then you can update to one ui!
*#1234# <--- Type that into phone dialer and see if it's the same as the screen shot firmware Note 9 version info i have posted! if yes then follow below!
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Managed to get the UPDATE.ZIP if your Note9 is currently on ARL3 (Oreo) to CSA2 (Pie)
ARL3 -> CSA2
If your device is still on ARK2, then update first to ARL3:
ARK2 -> ARL3
* If you have sd card place update.zip in it boot to recovery by holding power up + power +bixby button.
* Go to apply update from SD card.
* just choose install update, If no sd card choose adb in recovery.
* Download adb from here https://dl.google.com/android/reposi...st-windows.zip
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
miguelpassinho said:
I'm using this version: N9600ZHS1ARL4/N9600OWO1ARK1/N9600ZCU1ARK1, can I do the manual update to beta?
Thank you!
Click to expand...
Click to collapse
You cant you are not on the right firmware to update to one ui.. You will need to wait for the official update sorry!
Yeah the n9600 is snapdragon . So we have to wait on our own release.
Just got the notice of the postponement to march also - I have a N9600
When downloading file i get a bin file how do i put this on the sd card do i need to do anything with the file
N1NJATH3ORY said:
if your firmware matches below guide then you can update to one ui!
*#1234# <--- Type that into phone dialer and see if it's the same as the screen shot firmware Note 9 version info i have posted! if yes then follow below!
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Managed to get the UPDATE.ZIP if your Note9 is currently on ARL3 (Oreo) to CSA2 (Pie)
ARL3 -> CSA2
If your device is still on ARK2, then update first to ARL3:
ARK2 -> ARL3
* If you have sd card place update.zip in it boot to recovery by holding power up + power +bixby button.
* Go to apply update from SD card.
* just choose install update, If no sd card choose adb in recovery.
* Download adb from here https://dl.google.com/android/reposi...st-windows.zip
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
Click to expand...
Click to collapse
Mine says n9600owoarg6. Please help. This would be perfect because I don't have a computer.
ukbackups68 said:
When downloading file i get a bin file how do i put this on the sd card do i need to do anything with the file
Click to expand...
Click to collapse
N960foxm2ark2
---------- Post added at 03:48 PM ---------- Previous post was at 03:47 PM ----------
ukbackups68 said:
When downloading file i get a bin file how do i put this on the sd card do i need to do anything with the file
Click to expand...
Click to collapse
N960foxm2ark2
Is this build good to do the update
Nickdroid86 said:
Mine says n9600owoarg6. Please help. This would be perfect because I don't have a computer.
Click to expand...
Click to collapse
ukbackups68 said:
N960foxm2ark2
---------- Post added at 03:48 PM ---------- Previous post was at 03:47 PM ----------
N960foxm2ark2
Is this build good to do the update
Click to expand...
Click to collapse
You rename the .bin file to UPDATE.ZIP if you slowly read the guide you dont need to ask us anything as all the answer you are looking for are in the guide!
if your firmware matches below guide then you can update to one ui!
*#1234# <--- Type that into phone dialer and see if it's the same as the screen shot firmware Note 9 version info i have posted! if yes then follow below!
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Managed to get the UPDATE.ZIP if your Note9 is currently on ARL3 (Oreo) to CSA2 (Pie)
ARL3 -> CSA2
If your device is still on ARK2, then update first to ARL3:
ARK2 -> ARL3
* If you have sd card place update.zip in it boot to recovery by holding power up + power +bixby button.
* Go to apply update from SD card.
* just choose install update, If no sd card choose adb in recovery.
* Download adb from here https://dl.google.com/android/reposi...st-windows.zip
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
N1NJATH3ORY said:
You rename the .bin file to UPDATE.ZIP if you slowly read the guide you dont need to ask us anything as all the answer you are looking for are in the guide!
if your firmware matches below guide then you can update to one ui!
*#1234# <--- Type that into phone dialer and see if it's the same as the screen shot firmware Note 9 version info i have posted! if yes then follow below!
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Managed to get the UPDATE.ZIP if your Note9 is currently on ARL3 (Oreo) to CSA2 (Pie)
ARL3 -> CSA2
If your device is still on ARK2, then update first to ARL3:
ARK2 -> ARL3
* If you have sd card place update.zip in it boot to recovery by holding power up + power +bixby button.
* Go to apply update from SD card.
* just choose install update, If no sd card choose adb in recovery.
* Download adb from here https://dl.google.com/android/reposi...st-windows.zip
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
Click to expand...
Click to collapse
Not sure what oxm is. But ok.
Nickdroid86 said:
Mine says n9600owoarg6. Please help. This would be perfect because I don't have a computer.
Click to expand...
Click to collapse
There is nothing out for the SM-N9600 yet.
What has been posted in this thread does not apply,it's either for the SM-N960F or SM-N960U Beta ,neither of which will work on your model.
KOLIOSIS said:
There is nothing out for the SM-N9600 yet.
What has been posted in this thread does not apply,it's either for the SM-N960F or SM-N960U Beta ,neither of which will work on your model.
Click to expand...
Click to collapse
Damn. Ok thank you.
Nickdroid86 said:
Damn. Ok thank you.
Click to expand...
Click to collapse
The conventional wisdom is that updates have been faster this time around,so,at least there's that.
If the trend continues,perhaps there'll be an improvement over last year's Note 8 Int'l Snapdragon (SM-N9500),which didn't hit the street until April '18:
https://www.sammobile.com/firmwares/galaxy-note8/SM-N9500/TGY/
Nickdroid86 said:
Not sure what oxm is. But ok.
Click to expand...
Click to collapse
Our NOTE9 are categorized by CSC. Generally, for "unbranded" variants, these devices are included in the multi-CSC OXM.
There are other "branded" variants. They don't belong to the multi-CSC OXM. They are given their own CSC group. Example for the UK, they have different CSC for EE, so is O2.
Now, based on the info you provided, your device is part of the multi CSC OXM with current build ARK2.
But, to be sure, dial *#1234 to know your exact build number.
Being on a Multi-CSC OXM, means you can install/flash any multi CSC OXM firmware of your choice. It's completely safe.
Instructions for flashing using odin are provided by OP at posts #1 & 2.
Instructions for installing update.zip via recovery are also provided somewhere in this thread (can't remember the post #... you'll have to backread).
If you can confirm that you are indeed on ARK2 build, your update will be like this:
1. Install ARK2 -- > ARL3 update.zip
2. Install ARL3 ---> CSA2 update.zip
Hope this helps you.
Sent from my SM-N960F using Tapatalk
Related
YOU CAN FIND THE FULL G935AUCS9CSB1 FIRMWARE HERE
https://forum.xda-developers.com/att-s7-edge/how-to/g935a-oreo-8-0-stock-att-odin-files-t3870788
G935AUCU4CRE4 to G935AUCS4CRG5:
Download link: https://drive.google.com/file/d/1G9S6gl-MOJUt8ZBXFOnxrVtGyB4rYlT6/view
G935AUCS4CRG5 to G935AUCU4CRI2:
Download link: https://drive.google.com/file/d/1Qf2tlDbtTaRiCrRydJMmeqSjzolRCyGJ/view
G935AUCU4CRI2 to G935AUCS8CRJ2
Download link: https://drive.google.com/file/d/1f4Tb883UtxV6UFLClHIFyl0ta93pMvZg/view
G935AUCS8CRJ2 to G935AUCS8CRK1
Download link: https://drive.google.com/file/d/1nggO2urPVYO4wyfXcwp0QHft1mmo5KeJ/view
G935AUCS8CRK1 to G935AUCS8CRL1
Download link: https://drive.google.com/file/d/1Z7IS2GDMBW51cqUWhpr16AYZo1bQCYvH/view
If i helped you don't forget to hit thanks button
stek-kravari said:
AT&T just released July security updates
Baseband: G935AUCS4CRG5
Download link: https://drive.google.com/file/d/1G9S6gl-MOJUt8ZBXFOnxrVtGyB4rYlT6/view
If i helped you don't forget to hit thanks button
Click to expand...
Click to collapse
Thank you so much. However, have you tested it by any chance?
juni12 said:
Thank you so much. However, have you tested it by any chance?
Click to expand...
Click to collapse
I cannot test it because I don't own s7 edge, saw post on reddit that new update has been released so I pulled OTA from AT&T servers and uploaded here.
stek-kravari said:
I cannot test it because I don't own s7 edge, saw post on reddit that new update has been released so I pulled OTA from AT&T servers and uploaded here.
Click to expand...
Click to collapse
Thank you tho.
Not anything that different that I can point out. My device *may* be a tad bit smoother, at least after things settled down post-update. Battery life appears to be the same as prior to the update.
Hurricane Andrew said:
Not anything that different that I can point out. My device *may* be a tad bit smoother, at least after things settled down post-update. Battery life appears to be the same as prior to the update.
Click to expand...
Click to collapse
This is just July security updates, nothing else is updated.
How are you installing this, I don't see a BL, AP, CP, or CSC file listed anywhere in the download.
Skiefer said:
How are you installing this, I don't see a BL, AP, CP, or CSC file listed anywhere in the download.
Click to expand...
Click to collapse
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
http://dl.adbdriver.com/upload/adbdriver.zip
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done
stek-kravari said:
AT&T just released July security updates
Security patch level (SPL): July 1, 2018
Baseband version: G935AUCS4CRG5
Build number: R16NW.G935AUCS4CRG5
What’s changing: Android device security updates
Download link: https://drive.google.com/file/d/1G9S6gl-MOJUt8ZBXFOnxrVtGyB4rYlT6/view
If i helped you don't forget to hit thanks button
Click to expand...
Click to collapse
Can you please upload the G935AUCU4CRI2 august updates ????
amf22 said:
Can you please upload the G935AUCU4CRI2 august updates ????
Click to expand...
Click to collapse
Done
stek-kravari said:
Done
Click to expand...
Click to collapse
Thanks Dear
stek-kravari said:
Done
Click to expand...
Click to collapse
Thanks Dear
Can i update directly my device G935A to this
I want to know that Can i Update my Phone directly from G935AUCU4CRE4 to G935AUCS8CRJ2.
Mayank_Mehra said:
I want to know that Can i Update my Phone directly from G935AUCU4CRE4 to G935AUCS8CRJ2.
Click to expand...
Click to collapse
You cannot do that because this aren't full firmwares. You must go from:
G935AUCU4CRE4 to G935AUCS4CRG5
G935AUCS4CRG5 to G935AUCU4CRI2
G935AUCU4CRI2 to G935AUCS8CRJ2
Can you tell me how to install
stek-kravari said:
You cannot do that because this aren't full firmwares. You must go from:
G935AUCU4CRE4 to G935AUCS4CRG5
G935AUCS4CRG5 to G935AUCU4CRI2
G935AUCU4CRI2 to G935AUCS8CRJ2
Click to expand...
Click to collapse
Can you tell me how to install theses updates.& when will you upload full firmwares.
Mayank_Mehra said:
Can you tell me how to install theses updates.& when will you upload full firmwares.
Click to expand...
Click to collapse
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
https://drive.google.com/uc?id=1wov3...xport=download
4.)Put the update in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done. Now repeat steps 1 to 5 until you're on the latest firmware. (G935AUCS8CRJ2)
IMPORTANT: Flashing WILL WIPE EVERYTHING SO BACKUP FIRST. (I'm not responsible for anything that goes wrong.)
stek-kravari said:
Latest G935AUCS8CRJ2 firmware
Security patch level (SPL): October 1, 2018
Baseband version: G935AUCS8CRJ2
Build number: R16NW.G935AUCS8CRJ2
What’s changing: Android device security updates
Has anyone had any luck rooting this? I need root access for an NV rebuild :crying:
Click to expand...
Click to collapse
new update
Help with my s7 edge G935A
Please can you give me a link to download SM-G935A, G935AUCS8CRL1 8.0 4File combinason 4file odin
I can not download it on easy firmware cause its not free and then i havent money to buy it.
---------- Post added at 10:59 PM ---------- Previous post was at 10:53 PM ----------
Please can you add a link to download G935AUCS8CRL1_8.0_4File_USA (AT&T) ATT.rar please update on odin
Cleophat95 said:
Please can you give me a link to download SM-G935A, G935AUCS8CRL1 8.0 4File combinason 4file odin
I can not download it on easy firmware cause its not free and then i havent money to buy it.
---------- Post added at 10:59 PM ---------- Previous post was at 10:53 PM ----------
Please can you add a link to download G935AUCS8CRL1_8.0_4File_USA (AT&T) ATT.rar please update on odin
Click to expand...
Click to collapse
https://drive.google.com/file/d/1bow1pfoeGc2D5DcKAXzxxcG4lwosVMSd/view
This is G935AUCS9CSB1 latest firmware
UPDATE: 2019.01.14 CSA2 links for G960F and G965F
Official Pie release Odin files for G960F CSA2
MEGA: https://mega.nz/#!NB9WRSwT!k3TEelOWmWkE0XCl_TlmSPoOIL5zbBuSa1dHDOmNBcU
Google Drive: https://drive.google.com/open?id=15odt85bVCZjPTDZ-uyE-WJuQsaNywGMN
Official Pie release Odin files for G965F CSA2
MEGA: https://mega.nz/#!1ZFDBCRS!OX14DLMDxOiHXYZn3wqC2T0kr7O5UKkD-1hYYU6O5SU
Google Drive: https://drive.google.com/file/d/15NWmQpl2E_FPB3ZUJrGuCXEcqS2IzZdv/view?usp=sharing
OXM CSC so non carrier specific users should be fine.
Installation:
Step 1
Download Odin 3.13.1. Older versions won't work.
Step 2
Download and unzip the provided firmware. You should have 5 files in the folder
Step 3
Open Odin, and browse the files to their respective places. CSC: If you want to keep your data, select the HOME_CSC file, if you want a fresh installation, go with the regular CSC
Step 4
Power off your phone, then hold Volume Down + Bixby + Power. Once you see the warning screen, you can let go. Press Volume Up to enter download mode.
Step 5
Connect your phone to the PC and press Start in Odin. Once its finished, it'll automatically restart the phone.
Also, I'd like to take this opportunity to thank the amazing community here, starting from the ever so patient moderators, up to the brave people who let me experiment on their machines to get the OTA links during this beta program (both S9, S9+ and even Note 9). A very special thanks goes out of course to the great @Wishmasterflo who was the first one to let me mess around with multiple computers he owns until we got it just right and established a certain solution to give you guys all the updates almost instantly. Kudos to him, and to all you who in the course of the last few months came here to help out other people!
We may convert this thread to a general S9 Pie discussion if it's okay with the mods, now that the beta is over.
Thank you all, and enjoy the great update Samsung blessed us with this Christmas!
.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
BETA ARCHIVE:
MASSIVE SHOUTOUT TO Florian aka Wishmasterflo for working with me to capture the OTA links. Thank you for dedicating your time to serve the community. Would not have been possible without you.
18.12.2018: ZRLF for G960F is now available. Thanks again @Wishmasterflo
S9/S9+ Pie update download links.G960F BRJ6 to ZRKA: https://mega.nz/#!gERiSKZD!jJx6Bxm1GRYiXSC0tdcyH-kc76FBq-M3dIQq3SzeojE
G960F ZRKA to ZRKL: https://mega.nz/#!ZB8WXK6Z!uoCIQFfG9Cvk6dfsVUPh9AZ2vju7fB5AlL0ROEBV67k
G960F ZRKL to ZRKN: https://mega.nz/#!4csyFKZA!BgE_WsIyua2ji2g9FFcYqPvPt4QVNNL9HY15jKthd28
G960F ZRKN to ZRL5: https://mega.nz/#!QEMnQS5Q!G07ObfO3kb2k2bgg-DuwIg9wtoaK7AELdtvLR7xtV8U
G960F ZRL5 to ZRLF: https://mega.nz/#!Qc0AWQiT!YNpZuAY2CS_hwv2PsmqxnMRHK5rsZMpKf4Hdmmwyi5g
G965F BRJ6 to ZRKA: https://mega.nz/#!ZQZAzCCT!65m6DyYyykZfQHJ_BarJe-UZ_ioYZg4O--4527BSCrU
G965F ZRKA to ZRKL: https://mega.nz/#!f8x3zYAQ!BgfDoGArINNDnpzMG_1N1wFWlMF9p0Z8h2Ebl2A10YM
G965F ZRKL to ZRKN: https://drive.google.com/file/d/1lua7zNBSeNhGVuvDuZlixYnd04CNnG-v/view?usp=drivesdk
G965F ZRKN to ZRL5: https://mega.nz/#!vphlBQJa!2yP9RdQ6RlQ6eIOZfwC3fMs-48JksPPZcF-C8TMviFk
G965F ZRL5 to ZRLF: https://mega.nz/#!Nd1hyKoY!ag-uL_LzbSBk53VDA9qn-PWKa0ymlpWaoyl8vvzkbMo
credits: @KeTuRr74 for letting me set up the pserver to catch the OTA.
ZRL5 link for the G965F originally posted by @_alexndr
Instructions:
SD card method
Download the necessary update.zip(s) for your device according to your current software version.
Step 1
Copy the update.zip file to your SD card.
Step 2
Reboot the device into Recovery mode. (Turn off the phone, then Vol Up + Bixby + Power button)
Step 3
Go to apply update from SD card.
Step 4
Install the update, and be patient.
Many people have reported that on ZRKA, they're unable to apply new updates from SD because of SD card mounting errors.
First try formatting your card on your phone, and try again. If that fails, use adb sideloading.
Edit: The most effective way I came across for this issue is to actually use a PC (or a phone utility) to format the SD Card with FAT32, then try the update.
ADB Sideloading
Download the necessary update.zip(s) for your device according to your current software version.
Step 1
Download the latest ADB ZIP file (Windows), then extract it to C:\adb
Step 2
Download and install adb drivers.
Step 3
Copy the update.zip file to C:\adb (or wherever your adb.exe file is)
Step 4
Put your phone in recovery mode and select Apply update from ADB, then connect it to your PC
Step 5
Wait until your PC installs the drivers, if you're doing this for the first time.
Step 6
Open command prompt, navigate to C:\adb (or wherever your adb.exe and update.zip is)
Step 7
Issue the following command: adb devices
If you can see a device in 'sideload' mode, you can proceed to step 8, otherwise you may have some troubleshooting to do.
Step 8
Issue the following command: adb sideload update.zip
Step 9
Be patient, and enjoy your update.
NOTE: You can't go directly from BRJ6 to the latest update, you have to start with ZRKA and apply them one by one.
IT IS STRONGLY RECOMMENDED TO PERFORM A FACTORY RESET IF YOU'RE UPDATING FROM BRJ6 (Basically after a main system version upgrade). Otherwise its not necessary, but for
the most optimal performance and battery life, it is advised.
---
MOD EDIT: Telegram links removed. Please do not spam your Telegram group on XDA, you've been warned about this already!
Hate waiting but not long now
markyc25 said:
Hate waiting but not long now
Click to expand...
Click to collapse
I think today the 15. No beta...
I write with the chat from Samsung and they only write that they have no informations :highfive:
The beta came to me a few minutes ago and is installing now. Funny I didn't sign up for it until about an hour ago This is on the US Snapdragon.
Can someone try installing the latest version of Samsung members and giving it a go?
https://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=Samsung+members
Seemed like everyone in US had to do this..
anshuashmeet said:
Can someone try installing the latest version of Samsung members and giving it a go?
https://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=Samsung+members
Seemed like everyone in US had to do this..
Click to expand...
Click to collapse
Log in fails.
Nothing coming for the UK etc until the 20th
Samsung Members app for us (international), Samsung+ app for N.America
Tel864 said:
The beta came to me a few minutes ago and is installing now. Funny I didn't sign up for it until about an hour ago This is on the US Snapdragon.
Click to expand...
Click to collapse
Please, already lot of thread with US variant , ................
So, this is my service provider SW ver. : EUR/EUR,DBT/DBT
Am I valid for the upcoming beta?
I run the latest Samsung Members 2.4.70.11, but no registration to the upcoming beta exists. Is there something I should do, or just wait for both registration and update to beta?
Think we have to wait till 20th.
user860 said:
Think we have to wait till 20th.
Click to expand...
Click to collapse
How come? Germany should be on the first wave of beta release. What has changed?
dimxr said:
How come? Germany should be on the first wave of beta release. What has changed?
Click to expand...
Click to collapse
Probably issues with the exynos firmware
Possible Exynos issues ofc is possible, but is there any official statement yet?
I am wondering... Using the latest Samsung Members app, do you see the notification to enroll in the Pie beta?
Because there is nothing like this in mine...
https://www.sammobile.com/2018/11/16/shame-samsungs-support-no-clue-android-pie-beta/
Does being rooted will be an issue to get the update ?
Vitriol_Drinker said:
Does being rooted will be an issue to get the update ?
Click to expand...
Click to collapse
You cannot get any OTA when rooted...
If you un root will that be ok to get the beta?
markyc25 said:
If you un root will that be ok to get the beta?
Click to expand...
Click to collapse
You still won't be able to do OTA, because Knox is tripped. But you could flash it, when it becomes available to download.
Cholek3 said:
You still won't be able to do OTA, because Knox is tripped. But you could flash it, when it becomes available to download.
Click to expand...
Click to collapse
We will see if we get the notification in are members app ..until now..no notification ..
Cholek3 said:
You still won't be able to do OTA, because Knox is tripped. But you could flash it, when it becomes available to download.
Click to expand...
Click to collapse
If you unroot and flash stock FW by odin then you will receive OTA again.
Let me start off by stating that this is by no means my tutorial, all information was gathered from this community and organized into, hopefully, a helpful tut. Thank you to Max Weinbach, who originally posted this tutorial - due to issues with the file hosting server, that page hasn't been updated in a bit. Hopefully this will help in the meantime... And a big thank you to Venom0642 for hosting these files!
NO ROOT!!!
MUST BE SNAPDRAGON VARIANT (SM-N960, SM-N960U1, SM-N960W)
Optional: This will wipe the data on your phone. Use SmartSwitch to backup your phones data to your computer
Step 1: Download the 3 Items listed below (AT&T N960USQS1ARJA, Odin3, N960USQS1ARJA-U1CSA7)
Venom0642 said:
Download here: AT&T N960USQS1ARJA
Download here: Odin3_v3.13.1_3B_PatcheD
Click to expand...
Click to collapse
Venom0642 said:
Download here: N960USQS1ARJA-U1CSA7
Click to expand...
Click to collapse
Step 2: Copy or Move the "N960USQS1ARJA-U1CSA7.zip" file to your SD card and insert SD card into your Note 9 - If you do not have an SD card you can use ADB sideload to flash this .zip later in the process but I will not be going into much detail on this option. Skip this step if this is you and I will let you know when to use adb later on
Step 3: Unzip the "AT&T_N960USQS1ARJA" folder - Notice that you will have 5 files within this folder, we will only be using the 4 that begin with BL, AP, CP, and CSC
Step 4: Unzip the "Odin3_v3.13.1_3B_PatcheD" folder and launch the Odin3 executable
Step 5: Within Odin, click on the "BL" box and navigate to your "AT&T_N960USQS1ARJA" folder and select the corresponding file that beings with "BL". Do the same thing for the AP, CP and CSC fields within Odin, you can leave USERDATA empty - The BL, AP, CP, and CSC fields within Odin should now be populated with the "AT&T_N960USQS1ARJA" files
Step 6: Power down your phone. Once it is off, enter Odin mode by: holding Power button + Volume Down + Bixby button - Your phone may prompt you asking if you want to download a custom OS, press the Volume Up button to continue.
Step 7: Plug your Note 9 into your computer - If Odin is communicating with your phone, on the left hand side of the screen (odin on your computer), under "Log", you should see something like "Added!!"
Step 8: Hit "Start" within Odin - Your phone will now flash to N960USQS1ARJA and will automatically reboot into recovery mode when it is done. This will take a few minutes!
Step 9: You should now be in recovery mode. If you are not, power down your phone and boot into recovery by holding Power button + Volume Up + Bixby button. Use the volume keys to highlight "Wipe data/factory reset" , use the Power button to select it and select "Yes" to continue. - After the wipe completes, you will be brought back to the main menu of Recovery Mode
Step 10: Use the volume keys to highlight “apply update from SD card” and select it with the power key - If you do not have an SD card, this is where you would select "apply update from adb", open a command prompt/terminal on your computer and type: adb sideload <file location of N960USQS1ARJA-U1CSA7.zip>
Step 11: Now find the N960USQS1ARJA-U1CSA7.zip file that you put onto your SD card earlier by using the volume buttons to navigate and power button to select it - Your phone will now flash to N960USQU1CSA7 (Pie/OneUI) and will boot up normally when it is finished. This will take a few minutes!
Step 12: You are now on Android Pie. Walk through the normal startup menus and then use SmartSwitch to restore your data. Done!
Hope this helps a few people! I will try to keep this thread up to date with current builds as Venom0642 makes them available
I have a Snapdragon 845 U1 Unlocked version, using firmware.science it appears that I can upgrade directly to the Unlocked bloatfree firmware. Using your method I'll be upgrading to ATT version with ATT bloat. Is my understanding correct?
ceo.mtcl said:
I have a Snapdragon 845 U1 Unlocked version, using firmware.science it appears that I can upgrade directly to the Unlocked bloatfree firmware. Using your method I'll be upgrading to ATT version with ATT bloat. Is my understanding correct?
Click to expand...
Click to collapse
I do not know anything about the firmware science route, you would need someone else to help you there. But this version will have at&t bloat, you will have to disable the handful of apps they preload so you don't have to deal with them
Rwhyayn said:
I do not know anything about the firmware science route, you would need someone else to help you there. But this version will have at&t bloat, you will have to disable the handful of apps they preload so you don't have to deal with them
Click to expand...
Click to collapse
I went ahead and did that anyway and Viola! I have pie now. Just applied update
I'm running zrll what are the benefits running this over zrll? Does Samsung pay still work?
Does it work with every SD variant? Mine is SM-N9600 Brazil
Nice job on the tutorial!! I have been doing the Z beta builds, but have gone back to Oreo to wait for the official release!! Hopefully within the next week... but your guide here is very easy to understand and I'm sure it will help alot of people!!
Jaimesco12 said:
I'm running zrll what are the benefits running this over zrll? Does Samsung pay still work?
Click to expand...
Click to collapse
C builds add full support for carrier features. With T-Mobile, you get Advanced Messaging and a few other things I can't remember now. Samsung Pay works on all beta builds, just not Google Pay.
NotATreoFan said:
C builds add full support for carrier features. With T-Mobile, you get Advanced Messaging and a few other things I can't remember now. Samsung Pay works on all beta builds, just not Google Pay.
Click to expand...
Click to collapse
Ok gotcha, so this latest c build is still a beta? If not Will there be a path to just flash zip on the c builds when the official pie release comes out?
Cristiano Matos said:
Does it work with every SD variant? Mine is SM-N9600 Brazil
Click to expand...
Click to collapse
I don't think so, as far as I know you can't crossflash firmwares from different variants (in this Case N960U or N960U1 to N9600 or vice versa).
But I'm on the same boat, mine is also N9600 and eagerly waiting for any sign of Pie.
Have you seen the release notes for Pie in the members app? Make no sense to me.
Fota showing 1CSA8 lol.
Sent from my SM-N960U using XDA Labs
Venom0642 said:
Fota showing 1CSA8 lol.
Click to expand...
Click to collapse
Dam I just got on 7 lol
Venom0642 said:
Fota showing 1CSA8 lol.
Click to expand...
Click to collapse
I guess I'm skipping 7 lol
Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Sent from my SM-N960U using XDA Labs
LouK said:
Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Click to expand...
Click to collapse
If your on N96OUSQS1ARJA yes can go straight to 1CSA7 , so no need to odin to 1ARJA
Sent from my SM-N960U using XDA Labs
LouK said:
Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Click to expand...
Click to collapse
Happy to help brotha! Venom already answered your question, but yes you can do step 1 (even though you don't need all of those files) and step 2 and then skip right to step 9
Venom0642 said:
If your on N96OUSQS1ARJA yes can go straight to 1CSA7 , so no need to odin to 1ARJA
Click to expand...
Click to collapse
Thanks ....
So now I have something to do this weekend.....
Sent from my SM-N960U using XDA Labs
q173242 said:
I don't think so, as far as I know you can't crossflash firmwares from different variants (in this Case N960U or N960U1 to N9600 or vice versa).
But I'm on the same boat, mine is also N9600 and eagerly waiting for any sign of Pie.
Have you seen the release notes for Pie in the members app? Make no sense to me.
Click to expand...
Click to collapse
I saw the release notes now and they said march only
My release notes only contain a mess... no mention of note 9, only low or mid tier devices listed with date 28th of February.
I'm using Samsung Note 9 N600 dual SIM. Can I update using this method.
Hey! I was a bit impatient with my Note 9 when Pie started rolling out. I found a zip that I installed through the recovery mode which gave me Pie. Now my otherwise unmodded, non-rooted Note 9 isn't getting updates anymore.
Find attached my software info.
Any help?
all the info
https://forum.xda-developers.com/ga...icial-stock-fw-update-odin-thread-xx-t3825204
raul6 said:
all the info
https://forum.xda-developers.com/ga...icial-stock-fw-update-odin-thread-xx-t3825204
Click to expand...
Click to collapse
So my only option is to revert back to stock and reinstall my phone?
I've got the same problem. Is there any less painful way to fix this? I thought the Zip file was the T Mobile pre release and not suppose to interfere with future updates.
PRELUDE777 said:
I've got the same problem. Is there any less painful way to fix this? I thought the Zip file was the T Mobile pre release and not suppose to interfere with future updates.
Click to expand...
Click to collapse
Use samfirm to acquire the latest firmware intended for your Note9's CSC.
You can get your active from:
Settings >> About phone >> Software Information >> Service provider SW ver
You only need to input 2 info on samfirm tool:
1. Model: SM-N960U
2. Region: (your CSC)
3. Put a check mark on "Auto"
4. Put a check mark on "Decrypt automatically"
5. Click "Check Update"
The tool should give you the latest firmware for your device.
Download that firmware and Odin Flash to your device.
That should fix your OTA update.
Sent from my SM-N960F using Tapatalk
Hi,
We're all waiting for this famous update to Android EMUI 10?
I have a solution for you!
Test on version C432 Only!!!! test at your own risk on the other versions... I am in no way responsible for your actions.
/!\This method has the effect of resetting the phone!
> Remember to make a backup if necessary beforehand! (via HiSuite on computer for example)
I couldn't be held responsible for a possible phone brick or anything else, if you've never "tweaked" phones, just wait for them by OTA on HiSuite.
In the first case there you need a stock firmware, no superchouche of operator.
If you have firmware with superouche of operator, you must downgrade to version 9.1.0.310.
If you are on stock firmware and have version 9.1.0.346 or 9.1.0.0.347 you can switch to Android EMUI 10 directly if not you need at least to update your Phone to version 9.1.0.346 or 9.1.0.347.
If you are on firmware stock in 9.1.0.346 or 9.1.0.0.347
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
1. Download the update file ANDROID EMUI 10 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The update will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Enjoy you are in Android EMUI 10
If you are in firmware with superchouche of operator
To get ANDROID 9.1.0.346/347 you need to drop to 9.1.0.310 to update to 9.1.0.346/347 without sim card inserted.
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
Important /!\\
Remove your sim card during all operations, you could insert it only from the moment your phone is updated to 9.1.0.346 or 9.1.0.347, if you insert it before it will not work!
1. Download the update file ANDROID EMUI 9.1.0.310 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The downgrade will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Update your phone to version 9.1.0.346 or 9.1.0.0.347
10. Check your updates with HiSuite, then look at the file "SystemUpdate_xxxxxxxxxxxxx.log" in the folder :
"C:\Users\USERNAME\AppData\Local\HiSuite\log"
************************* full *************************
* udid:true
* VendorCountry:hw-eu
* C_Version:C432
* D_version000
* DashBoard:41.003.53.00.06
* DeviceName:LYA-L29
* packageType:full
* FirmWare:LYA-L29 9.1.0.347(C432E10R1P16)
* FirmWare_Base:
* FirmWare_Cust:
* FirmWare_Preload:
* Language:en_US
* OS:Hisuite_10.0.0.510- Windows 10 Enterprise 6.3
* SaleInfo:|eu|hw|N|EmotionUI_9.1.0|6,4 Go|4,29 Go|8_2,6GHz
************************************************************
Click to expand...
Click to collapse
11. C_Version must be C432 if it is not the case you had to start over until you have C432.
12. If you have C432 Follow the tutorial of the stock firmware.
If you want other firmware :
Firmware available :
10.0.0.154
9.1.0.310
9.1.0.300
9.1.0.266
9.1.0.238
MEGA FOLDER OF FIRMWARE
If you succeeded in dropping a thanks!
Thanks to Christophe.P & Boaddicted !!! from Huawei Forum for the firmware share and the manipulation
will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up
Rogstrix said:
will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up
Click to expand...
Click to collapse
What the version 9.1.0.xxx?
9.1.0.347
Rogstrix said:
9.1.0.347
Click to expand...
Click to collapse
Follow the guide with the firmware C432E7R1P5 I will works for you!
Will this work for lya-l09 c432
rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..
AllsGamingHD said:
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..
Click to expand...
Click to collapse
Okay thank you, I'll stay put untill ota I think then
Will this work on 9.1.0.350 region is C605? Thanks!
rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure
xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
No only for C432 version, sorry
dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..
rhyhoxda said:
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure
Click to expand...
Click to collapse
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
AllsGamingHD said:
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..
Click to expand...
Click to collapse
No it doesn't do ur home work read the threads...
I'm currently on 9.1.0.338(C432E10R1P16), Still suitable for using this file/method?
Update: Tested the dload method and All OK.
dog121 said:
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
No it doesn't do ur home work read the threads...
Click to expand...
Click to collapse
I HAVE MATE 20PRO LYA L09
Yes, I changed the zip file name from 29 to 09, then I was able to update to EMUI 10. IT WAS A SUCCESS. THANKS , MATE.
xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
Do you have any dload official firmware files for c605? Thanks!
Sent from my LG-US998 using Tapatalk
Hi
2 questions:
1.My version is 9.1.0.346 c432e10r1p16 is it possible to flash this version with EMUI10
2. I have Stock 9.1.0.346 I insert SIM after Update latest Stock and now I have an Operator Patch is it possible to Flash now?
THX for help
Well merry christmas all, I used to package files above to update my phone from 9.0 stuck on the april patch to 9.1, then proceed with the 10.0 and now im bricked. Any help would be apprecited.
This work on 9.1.0.358???
Thank you