I like my angel so much. However, the LCD really hurt my eyes. I know OLED display will be much better. It should be a simulation of paper, right?
Is it possible to buy an OLED display and change it? It will be much better than spend money to buy a stupid iPhone. Does anybody know where I can buy a 3.5" OLED?
Thanks
that's something more hard than just repalace the lcd dysplay, you should also must replace the uC taht controls the lcd and place one that can control the OLED display....
theoretically you can replace QVGA screen
FS C550 has 3.5" VGA, it is maybe the best PDA screen, but cable
I bought a att tilt used with a broken screen. Thing is the lcd screen looks fine as in i can see the hole screen(no broken pixels or anything). But it seems its cracked below the front glass as i cant feel the cracks. So basically I am asking if the only parts to the display are the lcd screen and the touch screen and the front glass? Cause since it doesn't seem the lcd screen is broke no reason to buy both. And wondering if the touch screen and front glass are two different pieces also.
Thanks for any help.
thanks for the help ...............
You only need the touch panel but you will need to solder 4 end of touch on screen. Also, use 4 scrooves method as it is quicker and faster to get to the screen.
the whole screen can be easily replaced for about $60 for a new screen. just need to disassemble the Tilt, there is a guide around here somewhere on how to do it.
First of all, HI to every one, this forum is excellent and u are doing excellent job.
I have one problem,yesturday my htc tytn Ii felt down from half meter and from that time my touch screen is not working . screen is working fine but touch no ...what can i do? to open a case and see if conector is maybe disconected or ? is there need buying new lcd screen?
You can try opening it up and disconnect/reconnect the touch digitizer ribbon cable, if that doesn't work buy a new touch screen digitizer. They're fairly cheap.
so correct me if i'm wrong,there are two parts on the display? lcd screen and that touch screen digitizer??and digitizer is on top?
Yes, there's the LCD screen, then on top the digitizer.
the digitizer costs about 15 bux on ebay, and the lcd with the digitizer costs about 50. my touchscreen stopped responding awhile back, so i had to replace it. word of advice though. the digitizer is kinda build into the lcd, and it is a huge pain (atleast 4 me) to replace it. i ended up cracking my screen doing it, and had to but the whole lcd.
so your suggesting to buy entire lcd screen with digitizer on it?
You can get the lcd+ digitizer from yallstore for 35$ http://www.yallstore.com/htc-tilt-tytn-ii-att-8925-lcd-touch-screen-replacementt56-p-874.html
Which is exactly what i ordered on thursday after my screen cracked.
Replacing JUST the digitizer is quite tricky, i don't know if any of you guys have done it (i have) and it was pretty darn tricky if youve never taken fiddley things apart beware! the digitizer glass is glued on (around the edges) to the LCD, a sharp knife around the edge (the glass WILL crack) and a careful replacedment (i had to solder the ribbon cable on) should help there is a guide somewhere where someone has documented their attempt!
so can i be sure that my problem will be solved with new lcd screen?
please guys i need anwsers fast
zolmajstor said:
so can i be sure that my problem will be solved with new lcd screen?
Click to expand...
Click to collapse
Can you be certain this will fix it? No. It's about 99% likely, however. I don't know about you, but I pay alot more than $35/month just for my service. I haven't done the screen on my Kaiser, but I did on my Excalibur, which my son then inherited. To be honest, the Kaiser looks easier from what I've read.
it most probably isn't a software problem, so yes buy a new LCD+digitizer and replace both.
So I dropped my Tilt today and there are several big cracks through the glass front. The phone works fine and I think the LCD screen is alright. I think the cracks are just in the glass part and the LCD is fine but I cant tell. One thing for sure is that the touch response is all messed up and I can't align it. I see digitizers on ebay for cheap. Is that the glass part that is cracked? Can I just get that or do I need a whole screen assembly?
Thanks
I tried to change digitizer but it is a mess you need to weld it to the display and it is not so easy (I'm not an electronic technician), additionally it comes sticked all around the display border so it is hard to clean the display boundary to stick the new digitizer and also it is hard to remove the old digitizer because it is to weak to remove it in one piece. For this reason, at least for my experience, I rather prefer to change the display and digitizer together so you don't have to fight with the removal, welding and sticking the new digitizer. Hope help you take decission.
I busted the screen on my 3T. I want to buy a new screen with the frame on ebay based on someone's recommendation since removing the frame requires a heat gun and cutting through adhesive. I watched a video about replacing the screen, which seems rather easy if you buy it with the frame, but I noticed the frame needs to be removed from the display if you need to replace the capacitive buttons. Is it safe to assume if you buy a replacement screen with the frame already attached that the capacitive buttons are included? The ebay listings (http://www.ebay.com/itm/For-OnePlus...552190?hash=item4d5c08a4fe:g:~eQAAOSwpONZOSEu) do not mention them. Would seem like a waste of time and money to buy a screen with the frame and then have to remove the frame to install the capacitive buttons.
The capacitive buttons should be included (note the small connector at the bottom of the back of the replacement screen). I do find it odd that the Ebay page lists it as a LCD replacement screen rather than an OLED. It'd be a shame if it really was just an LCD.