Is anyone having any trouble with setting screen mode to vivid?
When I switch to vivid, the entire screen becomes very orange, to a degree that something is clearly wrong. It looks like the blue light filter is turned on, even though it isn't. And turning on the blue light filter makes it much worse. It's like there is a single application of blue light filter permanently active, and then a full second layer being added when actually turning the blue light filter on.
This is coming from someone who generally runs Warm1 or Warm2 settings on my TVs and monitors. This isn't just a warm white, this is distinctly orange. Changing back to natural brings the white levels back to a normal level that I would say is pretty neutral, if not slightly warm.
When set to vivid, changing the white balance between warm and cool does almost nothing; the change is so subtle that you have to actually flip back and forth several times to notice it. And changing the RGB in advanced settings does absolutely nothing.
A couple other facts to note:
- I do not have any type of screen protector; the one that was on the phone out-of-the-box has been removed.
- This isn't just related to the angle at which I am viewing the phone; it is consistently orange from every possible angle.
- Blue light filter, night mode, and adaptive brightness are all turned off.
Is anyone else experiencing this, or is it just on my end? I have restarted the phone several times. I would really like to avoid a factory reset if possible.
i find mine to be more warm in natural mode however is been known that the screens on the S10 are much warmer than s9/n9 due to the reduction in blue light
if in vivid mode - please access the manual setup maybe the red is setup to max or something
Check that you do not have night light also selected in the drop down settings, as the s10 already has blue light filter reduction.
Mine was like that originally. Had to install Play Books and then turn off it's version of night mode. Seems that even though I didn't install it on this phone, it's night mode somehow still carried over.
tim2london said:
i find mine to be more warm in natural mode however is been known that the screens on the S10 are much warmer than s9/n9 due to the reduction in blue light
if in vivid mode - please access the manual setup maybe the red is setup to max or something
Click to expand...
Click to collapse
As I said in my post, it doesn't matter what I set the RGB values to, they make no difference. And the whites look just fine in Natural mode, so it's not the screen, it's a software issue.
tandeh said:
Check that you do not have night light also selected in the drop down settings, as the s10 already has blue light filter reduction.
Click to expand...
Click to collapse
As I already said in my post, the blue light filter is turned off. It's off in the quick settings and off in the actual settings. I can turn it on and it doubles the problem; turning it back off returns to the normal problem.
lightmastertech said:
Mine was like that originally. Had to install Play Books and then turn off it's version of night mode. Seems that even though I didn't install it on this phone, it's night mode somehow still carried over.
Click to expand...
Click to collapse
I've never used Play Books before. Installed it just now and there's no night mode in it.
So it looks like the bug is tied to setting a schedule for the blue light filter. This morning the overly orange effect was gone. It seems likely that the setting somehow carried over from my previous phone and stayed separate from the one on this phone. Unfortunately, this probably means I will need to factory reset because there is no way of accessing this second schedule.
I won't be the only person that has carried over data from a previous phone and used a scheduled blue light filter. I hope Samsung fixes this in an update so that others don't have to deal with it.
In Play Books, open any free book and click on
then disable the schedule and hit turn it off now if it's on
Edit: screenshots aren't showing up for some reason. Anyway open any free book, tap in the middle of the page to bring up the menu bar at the top, tap on "Aa" and then night light settings. Set the schedule to "None" and hit end now if your screen is currently orange.
My wife has never installed Play Books, and that still fixed it for her.
lightmastertech said:
In Play Books, open any free book and click on
then disable the schedule and hit turn it off now if it's on
Edit: screenshots aren't showing up for some reason. Anyway open any free book, tap in the middle of the page to bring up the menu bar at the top, tap on "Aa" and then night light settings. Set the schedule to "None" and hit end now if your screen is currently orange.
My wife has never installed Play Books, and that still fixed it for her.
Click to expand...
Click to collapse
Good to know, thanks. If the issue comes back again tonight, I will try this.
I think there is some hidden night mode in android which Play Books ties into. My wife's old Pixel had a night mode setting in the settings app which she had set up, and the new S10 night mode looks entirely different. Think copying settings and accounts over brought the hidden night mode settings over, and Play Books is just the easiest way to access that hidden setting.
The Play Books trick worked. Thanks guys!
Exactly like @lightmastertech said, the vanilla Android night mode settings are hidden but still active, and it carried over from my Pixel 3. Play Books allowed me to access this menu (odd that it's still there, 100% intact) and disable it.
Sevael said:
The Play Books trick worked. Thanks guys!
Exactly like @lightmastertech said, the vanilla Android night mode settings are hidden but still active, and it carried over from my Pixel 3. Play Books allowed me to access this menu (odd that it's still there, 100% intact) and disable it.
Click to expand...
Click to collapse
Google's gonna get a lot of downloads for Play Books now, lol. Only app I could find that accessed the system night mode an not its own filter overlay. Glad it worked for you man! ?
Sevael said:
Is anyone having any trouble with setting screen mode to vivid?
When I switch to vivid, the entire screen becomes very orange, to a degree that something is clearly wrong. It looks like the blue light filter is turned on, even though it isn't. And turning on the blue light filter makes it much worse. It's like there is a single application of blue light filter permanently active, and then a full second layer being added when actually turning the blue light filter on.
This is coming from someone who generally runs Warm1 or Warm2 settings on my TVs and monitors. This isn't just a warm white, this is distinctly orange. Changing back to natural brings the white levels back to a normal level that I would say is pretty neutral, if not slightly warm.
When set to vivid, changing the white balance between warm and cool does almost nothing; the change is so subtle that you have to actually flip back and forth several times to notice it. And changing the RGB in advanced settings does absolutely nothing.
A couple other facts to note:
- I do not have any type of screen protector; the one that was on the phone out-of-the-box has been removed.
- This isn't just related to the angle at which I am viewing the phone; it is consistently orange from every possible angle.
- Blue light filter, night mode, and adaptive brightness are all turned off.
Is anyone else experiencing this, or is it just on my end? I have restarted the phone several times. I would really like to avoid a factory reset if possible.
Click to expand...
Click to collapse
I have a s10+ and just noticed I have the same exact issue. I posted earlier on the s10+ forums.. Natural looks much cooler
Nevermind.. the playbook trick worked. I came from a pixel and had the blue light setting turned on much earlier than my s10+. Thanks @lightmastertech @Sevael
Wow, just wow. Ran into this tonight for the first time because I wanted to try out the Vivid colour mode. What an amateur oversight by Samsung to not prevent the stock night mode from running. For those that want to have access to this setting without Play Books, you can use Quick Shortcut Maker and just search for Night Light, then launch the returned result. It will put you right into the stock Night Light mode.
Sevael said:
The Play Books trick worked. Thanks guys!
Exactly like @lightmastertech said, the vanilla Android night mode settings are hidden but still active, and it carried over from my Pixel 3. Play Books allowed me to access this menu (odd that it's still there, 100% intact) and disable it.
Click to expand...
Click to collapse
Can you now change the color temperature after play book trick? I cannot still change it.
I just had to bump this because of the absolute cavalcade of potential issues that can cause the screen to appear tinted. I've googled this for almost a year now after only noticing the yellowing of my screen when in Google photos. Then the random tinting was happening at sunset and every forum pointed to blue light, vivid setting, night modes etc... To find this elusive setting in play books of all places, to fix an issue that's plagued me through my last 3 devices, to the note 10 I'm on now, and it's finally fixed. Thanks. Thanks a lot.
I have only just bought an S10, and I have the same issue as OP. I have installed play books and followed instructions on this thread, but can't find in on play books night light settings set the "schedule" to "none" and hit end now.
Thank you so much ! Same happened to my FOLD - You solved it for me !
lightmastertech said:
In Play Books, open any free book and click on
then disable the schedule and hit turn it off now if it's on
Edit: screenshots aren't showing up for some reason. Anyway open any free book, tap in the middle of the page to bring up the menu bar at the top, tap on "Aa" and then night light settings. Set the schedule to "None" and hit end now if your screen is currently orange.
My wife has never installed Play Books, and that still fixed it for her.
Click to expand...
Click to collapse
You are a genius - I had this happen to my new Galaxy Fold - it suddenly became warm and dim and I couldnt figure out what happened - Searched forums and found your solution - This must be pinned in all SAMSUNG forums
Thanks !
palakpatel910 said:
Can you now change the color temperature after play book trick? I cannot still change it.
Click to expand...
Click to collapse
Did you find out the solution?
Related
I've noticed that while viewing something my phone sometimes changes the brightness, not drastically, but noticeable still, especially if the background is white. My auto brightness is off and I'm running stock and not rooted. I was wondering if it was something with my phone or is it normal?
Is your sleep timer set to Auto Sleep? It dims the phone automatically if you're not moving it enough. Try changing it to a set timer and see if it still does it.
DiZzyBonne said:
Is your sleep timer set to Auto Sleep? It dims the phone automatically if you're not moving it enough. Try changing it to a set timer and see if it still does it.
Click to expand...
Click to collapse
Just tried it at your suggestion. I tried it for 45 seconds then a minute it still happens. The best way I can describe it is if you use blinkfeed or any rss reader that has a light theme or even a web site like this. If you see a picture, then scroll away from it like you're reading the rest of the article, it'll dim a little bit.
As mentioned above I believe this may be the HTC Ones auto screen tone adjusting similar to how you put your home HDTV color temps on Dynamic, Standard, Movie, Sports etc. The HTC One like the Samsung S3 both utilize a battery saving technology used to automatically adjust the tone of webpages and other pure white screens by conserving battery power. I would try viewing the same screen with the power save features on and off to see if there's any noticeable difference. I don't believe there is a specific setting for this technology on the settings panel in the One like there is on the S3.
Sent from my HTCONE using xda app-developers app
Hmm, I can't get this to reproduce. The only thing I can think of is the stock web browser has a setting to dim webpages that are still loading, but I don't think that helps you any. Sorry .
Skyymiles
I've also tried just tried what you suggested, it still happens, which is strange.
DiZzyBonne
I tried that too, tested it with Naked Browser and Opera Mini.
Still, thank you both for trying to help, I appricate it. I'm still within the couple of days to return, so I'm just going to go and see if I can get a swap for another HTC One.
Do you have power save mode on?
x714x said:
Do you have power save mode on?
Click to expand...
Click to collapse
No, not originally. I did turn it on, tested, then off again to see if that did anything but to no effect. Still, this won't push my away from the phone. It's a beautiful piece, I just hope the swap will fix that.
I just got my Asus tf701t and, while first using it, the home and back buttons did not work in portrait mode and the screen would change brightness at varying time intervals (usually a few seconds) when the brightness was set very low. an update to 4.3 cured the back and home button issue but the screen still can't stay at one brightness level when I set it to very dim. It's not changing dramatically, more like a few percent, but enough to be distracting.
The odd part is that the dimming/brightening issue almost seems application dependent. It occurs far more often in the home screen or skout but almost never when playing shadowgun dead zone or when using naked browser.
Does anyone else have similar issues?
The only posts about flickering on other people's tf701t seem to be related to power saving and I need to know if this needs to be exchanged or if this is a common problem.
dbozam said:
I just got my Asus tf701t and, while first using it, the home and back buttons did not work in portrait mode and the screen would change brightness at varying time intervals (usually a few seconds) when the brightness was set very low. an update to 4.3 cured the back and home button issue but the screen still can't stay at one brightness level when I set it to very dim. It's not changing dramatically, more like a few percent, but enough to be distracting.
The odd part is that the dimming/brightening issue almost seems application dependent. It occurs far more often in the home screen or skout but almost never when playing shadowgun dead zone or when using naked browser.
Does anyone else have similar issues?
The only posts about flickering on other people's tf701t seem to be related to power saving and I need to know if this needs to be exchanged or if this is a common problem.
Click to expand...
Click to collapse
I don't have the flickering when not on auto and lowest setting.
However some apps can dimm the screen while loading.
On the TF700 the stock browser did that when loading a page but on the TF701 the brightness doesn't do that.
You have an ambient light sensor built into the device. It adjusts the brightness based on the lighting in your environment. It can't be turned off either.
Sent from my Transformer Infinity TF701T using Tapatalk HD
xRevilatioNx said:
You have an ambient light sensor built into the device. It adjusts the brightness based on the lighting in your environment. It can't be turned off either.
Click to expand...
Click to collapse
It can't be turned off? So when you turn on automatic brightness it just changes the brightness more drastically? This doesn't sound right.
Based on the other poster's response, I think I need to return this unit. The screen dimming/brightening happens to often and randomly to be part of my apps and I even noticed, in some apps, that just touching the screen causes a brightness change.
Even if this is by design, it is far too distracting.
dbozam said:
It can't be turned off? So when you turn on automatic brightness it just changes the brightness more drastically? This doesn't sound right.
Based on the other poster's response, I think I need to return this unit. The screen dimming/brightening happens to often and randomly to be part of my apps and I even noticed, in some apps, that just touching the screen causes a brightness change.
Even if this is by design, it is far too distracting.
Click to expand...
Click to collapse
Read it and weep my friend. Proof is in the pudding..
Sent from my Transformer Infinity TF701T using Tapatalk HD
dbozam said:
I just got my Asus tf701t and, while first using it, the home and back buttons did not work in portrait mode and the screen would change brightness at varying time intervals (usually a few seconds) when the brightness was set very low. an update to 4.3 cured the back and home button issue but the screen still can't stay at one brightness level when I set it to very dim. It's not changing dramatically, more like a few percent, but enough to be distracting.
The odd part is that the dimming/brightening issue almost seems application dependent. It occurs far more often in the home screen or skout but almost never when playing shadowgun dead zone or when using naked browser.
Does anyone else have similar issues?
The only posts about flickering on other people's tf701t seem to be related to power saving and I need to know if this needs to be exchanged or if this is a common problem.
Click to expand...
Click to collapse
My 701 is doing this as well. Turned off auto brightness, turned off power saver, rebooted. When it comes back up the device acts like auto brightness is on, with screen brightness fluctuaating randomly. Turning power saver on and off again seems to solve it, but that behavior is very annoying - it's why I turn auto brightness off in the first place.
US SKU running 4.3 installed via ota, no root or unlock or anything - straight stock. Its also my second device, my original had a bad cable and wouldn't charge. Serial number ends in 072259.
Sent from my K00C using Tapatalk 4
Aaroneious said:
My 701 is doing this as well. Turned off auto brightness, turned off power saver, rebooted. When it comes back up the device acts like auto brightness is on, with screen brightness fluctuaating randomly. Turning power saver on and off again seems to solve it, but that behavior is very annoying - it's why I turn auto brightness off in the first place.
US SKU running 4.3 installed via ota, no root or unlock or anything - straight stock. Its also my second device, my original had a bad cable and wouldn't charge. Serial number ends in 072259.
Sent from my K00C using Tapatalk 4
Click to expand...
Click to collapse
I also tried turning power saver mode on and off and for me it seemed to improve the situation but not eliminate it. I am going to return the tablet and wait for the nexus 10.
Ugh, mine has been doing this, too. Can't believe there isn't a setting somewhere...
Mine is doing the same thing... glad that it's not just me, but this flickering is very annoying
Driving me nuts
I'm having the same problem and it's driving me nuts!
I'm quite convinced it's a software "feature" but currently there seems to be no way to turn it off?
It's one of those "Adjust brightness of the screen based on content" or "Changing LCD refresh rate and colors for power saving" but sadly it does it the wrong way around (This has been going on for a while now, manufacturers don't really get it). When there is a lot of bright content the brightness will rise and when there is mostly a dark screen it will fall.
Of course, this should happen exactly the other way around. When there is a lot of bright/white on my screen it should lower and when there is mostly black it should become brighter thus giving you more contrast but keeping the overall lux that comes off your screen the same...... My Intel graphics notebook does this too and it's very irritating. There they do it by manipulating the LCD screen and lowering the refresh rate and other tricks to save battery. First thing I turned off.
However way it goes though, you should be able to turn it off!
Quindor said:
I'm having the same problem and it's driving me nuts!
I'm quite convinced it's a software "feature" but currently there seems to be no way to turn it off?
It's one of those "Adjust brightness of the screen based on content" or "Changing LCD refresh rate and colors for power saving" but sadly it does it the wrong way around (This has been going on for a while now, manufacturers don't really get it). When there is a lot of bright content the brightness will rise and when there is mostly a dark screen it will fall.
Of course, this should happen exactly the other way around. When there is a lot of bright/white on my screen it should lower and when there is mostly black it should become brighter thus giving you more contrast but keeping the overall lux that comes off your screen the same...... My Intel graphics notebook does this too and it's very irritating. There they do it by manipulating the LCD screen and lowering the refresh rate and other tricks to save battery. First thing I turned off.
However way it goes though, you should be able to turn it off!
Click to expand...
Click to collapse
I'm having the same issue. I think it's the smart dimmer option Asus have used before but they forgot to include it in the Asus customised options. I'll have a dig through the ROM to see where it is stored.
I'm having this problem as well.
I have my brightness set to about 80%, Auto-Brightness Off, Power Save Off.
It is very annoying when reading magazines that have a lot of white background. My screen will be stable for minutes then, often on a touch, will change the screen brightness, seemingly by 5-20%.
I was just getting ready to return it, and thought I would check here to see of anyone else has this problem. Has any actually called Asus with this complaint? I would be interested to know if they see this as a hardware defect, software bug, or working as designed.
PS - I just placed a technical support request about this on the Asus Website. Here is my problem description:
Even with automatic brightness & power saving turned off, the brightness of the screen will change over time, often seemingly in response to a touch. (Reading Mode is Off as well.)
The period between changes can vary from several minutes to 30 seconds. It happens both while docked and undocked. It happens with apps and just at the launcher.
The amount of brightness change is 5-20% and it will often seem to step through some values before it stops at a particular one.
Given how fantastic looking the screen is, this unwanted fluctuation is particularly annoying.
I also own a TF201 and have not experienced this problem on that product.
Click to expand...
Click to collapse
sschlosnagle said:
I'm having this problem as well.
I have my brightness set to about 80%, Auto-Brightness Off, Power Save Off.
It is very annoying when reading magazines that have a lot of white background. My screen will be stable for minutes then, often on a touch, will change the screen brightness, seemingly by 5-20%.
I was just getting ready to return it, and thought I would check here to see of anyone else has this problem. Has any actually called Asus with this complaint? I would be interested to know if they see this as a hardware defect, software bug, or working as designed.
PS - I just placed a technical support request about this on the Asus Website. Here is my problem description:
Click to expand...
Click to collapse
I have this issue too but not a real biggie as the connection problems between dock and tablet.
Same problem!
dbozam said:
I just got my Asus tf701t and, while first using it, the home and back buttons did not work in portrait mode and the screen would change brightness at varying time intervals (usually a few seconds) when the brightness was set very low. an update to 4.3 cured the back and home button issue but the screen still can't stay at one brightness level when I set it to very dim. It's not changing dramatically, more like a few percent, but enough to be distracting.
The odd part is that the dimming/brightening issue almost seems application dependent. It occurs far more often in the home screen or skout but almost never when playing shadowgun dead zone or when using naked browser.
Does anyone else have similar issues?
The only posts about flickering on other people's tf701t seem to be related to power saving and I need to know if this needs to be exchanged or if this is a common problem.
Click to expand...
Click to collapse
Thank you very much for creating this topic, because I was worried for my tablet too!
---------- Post added at 11:55 AM ---------- Previous post was at 11:52 AM ----------
Snah001 said:
I have this issue too but not a real biggie as the connection problems between dock and tablet.
Click to expand...
Click to collapse
I heared a lot of people say I about this, but happily I seem to don't have it or I don't detect it. What is this dock problem about?
I suspect this is the same "smart dimming" feature that the 700 had.
improvius said:
I suspect this is the same "smart dimming" feature that the 700 had.
Click to expand...
Click to collapse
Yep me too and as soon as I root I'm going to see if the same fix will turn it off
There seems to be no way to disable this. Some believe it's the light sensor, but I've taped over mine with black electrical tape and tested and I don't see any difference in the behavior. Check our my Youtube video if you are a user who doesn't see the issue (look for threads in this same XDA forum).
I've finally been able to get someone at Asus to look into this and it's been sent to TW for review. I haven't heard anything back yet. I strongly recommend that other people who are annoyed by this (I find it tremendously distracting) to search on "asus escalation" which will bring up a special mailbox. Here is the link (although I do not know if the link will work for you). This should get looked at by someone with at least some ability beyond reading a script. If enough people do this, I think that they will fix it. Since you can temporarily override it by toggling smart saver on/off, it has to be fixable by software.
http://www.service.asus.com/#!escalation-mailbox/c1scx
derekk1 said:
There seems to be no way to disable this. Some believe it's the light sensor, but I've taped over mine with black electrical tape and tested and I don't see any difference in the behavior. Check our my Youtube video if you are a user who doesn't see the issue (look for threads in this same XDA forum).
I've finally been able to get someone at Asus to look into this and it's been sent to TW for review. I haven't heard anything back yet. I strongly recommend that other people who are annoyed by this (I find it tremendously distracting) to search on "asus escalation" which will bring up a special mailbox. Here is the link (although I do not know if the link will work for you). This should get looked at by someone with at least some ability beyond reading a script. If enough people do this, I think that they will fix it. Since you can temporarily override it by toggling smart saver on/off, it has to be fixable by software.
http://www.service.asus.com/#!escalation-mailbox/c1scx
Click to expand...
Click to collapse
I returned my tf701, waited for cyber Monday, and bought the Samsung note 2014 since the nexus 10 2 is so elusive. I put in an escalation request anyway and included a link to this thread in my complaint.
improvius said:
I suspect this is the same "smart dimming" feature that the 700 had.
Click to expand...
Click to collapse
I also saw this issue on my TF701. This seems a "feature" of Tegra SoC
Last night I was watching a movie with a friend and afterwards she complained that my watch kept turning on and was distracting. Good point. You can make the watch silent with a fairly quick toggle, but you can't disable its display when a bright light would be inappropriate very easily without playing with one or two settings (i.e. not accessible from the quick settings display).
There is already a daylight setting, accessible from the power screen, but it would be nice if it offered several levels:
- Daylight for visibility in bright light
- Normal
- Dark - does not turn on automatically (must use physical button) and dimmest display when activated (Edit: no automatic display on notifications either)
- (and maybe also Dim for evening, dim light, but still has auto-on)
Workaround - long sleeves and/or removing the watch in dark settings. Even with sleeves, if you are in a situation where emitting light would be inappropriate (i.e. stage worker, waiter in a subdued lighting restaurant) it would be nice to be able to temporarily and independently disable the auto-on gesture/feature.
Another workaround - manually adjust the display intensity from the quick settings menu (you can also manually enable daylight mode this way as well), but this doesn't prevent the watch from turning on automatically and it doesn't allow quick switching between 2 or 3 common settings. Disabling the wake gesture involves fumbling with the phone.
While I'm at it - an ambient light sensor for auto-brightness like on most phones would have been nice...
I'm going to say that any back lit device is going to be bright in the dark, no matter how dim the display is. I don't really see any way other than to turn the watch off.
^^I do have to admit though. If it is dark I would rather have my phone fully dim than on auto brightness
Sent from my SM-N900T
flarbear said:
Last night I was watching a movie with a friend and afterwards she complained that my watch kept turning on and was distracting. Good point. You can make the watch silent, but you can't disable its display when a bright light would be inappropriate.
There is already a daylight setting, accessible from the power screen, but it would be nice if it offered several levels:
- Daylight for visibility in bright light
- Normal
- Dark - does not turn on automatically (must use physical button) and dimmest display when activated
- (and maybe also Dim for evening, dim light, but still has auto-on)
Workaround - long sleeves and/or removing the watch in dark settings. Even with sleeves, if you are in a situation where emitting light would be inappropriate (i.e. stage worker, waiter in a subdued lighting restaurant) it would be nice to be able to temporarily and independently disable the auto-on gesture/feature.
Another workaround - manually adjust the display intensity from the quick settings menu (you can also manually enable daylight mode this way as well), but this doesn't prevent the watch from turning on automatically and it doesn't allow quick switching between 2 or 3 common settings. Disabling the wake gesture involves fumbling with the phone.
While I'm at it - an ambient light sensor for auto-brightness like on most phones would have been nice...
Click to expand...
Click to collapse
You can disable the wake up gesture in settings on the watch. Simply create a shortcut if your rooted on your launcher screen, its a easy fix.
Sparky_za said:
I'm going to say that any back lit device is going to be bright in the dark, no matter how dim the display is. I don't really see any way other than to turn the watch off.
Click to expand...
Click to collapse
Most back lit watches don't turn the back light on automatically. The few that I've had that had a way to turn the back light on without using a button required a significantly more deliberate gesture than simply changing the angle of your hand. The gear also (normally) turns on when you get a notification which has nothing to do with any user-initiated action (I forgot to list "no display on notification" as a component of the feature in my OP).
The dimmest setting is dim enough for cases where you would need to turn it on, and if you are deliberately turning it on to check the time, then you can choose an angle and cradle it in your hand to avoid disturbing others. The key ingredient is that you are aware of the light in that case as opposed to the watch quietly flashing of its own accord.
fOmey said:
You can disable the wake up gesture in settings on the watch. Simply create a shortcut if your rooted on your launcher screen, its a easy fix.
Click to expand...
Click to collapse
I'm not rooted and there is no setting on the watch that can disable this, I would have to fumble with the phone and the gear manager to turn it off (and back on)...
flarbear said:
Most back lit watches don't turn the back light on automatically. The few that I've had that had a way to turn the back light on without using a button required a significantly more deliberate gesture than simply changing the angle of your hand. The gear also (normally) turns on when you get a notification which has nothing to do with any user-initiated action (I forgot to list "no display on notification" as a component of the feature in my OP).
The dimmest setting is dim enough for cases where you would need to turn it on, and if you are deliberately turning it on to check the time, then you can choose an angle and cradle it in your hand to avoid disturbing others. The key ingredient is that you are aware of the light in that case as opposed to the watch quietly flashing of its own accord.
I'm not rooted and there is no setting on the watch that can disable this, I would have to fumble with the phone and the gear manager to turn it off (and back on)...
Click to expand...
Click to collapse
Open settings on your gear and go into motion settings.
fOmey said:
Open settings on your gear and go into motion settings.
Click to expand...
Click to collapse
That must be new on the upcoming fw that isn't released in the US yet - no Motion category in my Settings. That will be nice to have when it arrives, but I would still think that adding a 3rd state for dark mode to the existing quick setting toggle for the brightness would be a nice addition even if there is a setting for this on the watch.
It is very similar to the fact that "sound, vibrate, silent" modes are all accessible via the same quick toggle on phones - sure you can achieve everything that those sound settings provide through other means, but given the number of times when you want to switch sound modes they typically have a very accessible toggle - as I think they should do with light settings on the Gear...
fOmey said:
Open settings on your gear and go into motion settings.
Click to expand...
Click to collapse
Also, that setting does not disable the display coming on when you get a notification. You can modify your notifications as well, but that gets a bit complicated compared to just having one easily accessible toggle that tells the watch that you want more control over when the display turns on in a particular situation...
flarbear said:
Also, that setting does not disable the display coming on when you get a notification. You can modify your notifications as well, but that gets a bit complicated compared to just having one easily accessible toggle that tells the watch that you want more control over when the display turns on in a particular situation...
Click to expand...
Click to collapse
I am in the US and can disable wake-up gesture and turn off notifications from Gear Manager. So yesterday before going to the movies myself I knew it would be too bright even at the lowest setting. So while waiting to get popcorn, I switched both off and enjoyed the movie. Two settings in one app very quick. After the movie before getting up I turned them back on.
Edit: Of course if you don't have Gear Manager this might not be possible.
Xirix12 said:
I am in the US and can disable wake-up gesture and turn off notifications from Gear Manager. So yesterday before going to the movies myself I knew it would be too bright even at the lowest setting. So while waiting to get popcorn, I switched both off and enjoyed the movie. Two settings in one app very quick. After the movie before getting up I turned them back on.
Edit: Of course if you don't have Gear Manager this might not be possible.
Click to expand...
Click to collapse
I do have Gear Manager.
My point is not "this can't be done" or "this is so hard" as it is - there is already an easy to access convenience setting for dealing with the watch's brightness and it is right next to the watch's easily accessible toggle for various levels of sound abatement. It seems like a natural extension to have those same display-related settings choices from Gear Manager be simultaneously and trivially activated from the same convenience menu that you would use to put the watch in vibrate or silent mode. A one-stop shop for both sound and light abatement (or enhancement as is the case for the current daylight setting).
With respect to "long press on power, tap on [Display] once or twice", these alternate methods are not so convenient...
If there was a way to get screen filter on the gear you could make the screen extremely dark. I use it on my phone in the theater.
Sent from my SPH-L720 using xda app-developers app
Hey! So I just bought a Nexus 6 on Amazon last week. Yesterday night, I clicked the invert colors button so that I could read without hurting my eyes at night. However, I forgot to turn it off before I slept and just woke up to an ugly screen with messed up greens and reds. I’ve tried running the screen burn in apps but they don’t seem to work. Should I hit Motorola up? Also, it’s not rooted.
Edit: I took a screen shot and an image of the screen using another device (moto g) the one with the regular greens is the screenshot and is how it used to look. The one with dull stuff is how it looks now.
Woah. That's insane. I'd return it, OP. Looks like you got a **** screen.
Color blind mode is active. But honestly i wanna find out if thw support would replqce your device.
Did you play with the 'Simulate colour space' under 'Developer Options'? Check if the option is 'Disabled'.
Hi everyone, as you should know the Asus Zenwatch 3 has an AMOLED display. From my understanding this should mean when displaying the colour black, the pixels should be turned off completely (like on my S7 Edge).
I was looking at my watch in a pitch black room with an ambient watch face displaying a black background and it appeared slightly reddish. Compared with my LG G Watch R sporting the exact same watch face it was clear the LG had the black pixels turned off but not on my Zenwatch 3.
I've attached a couple of pictures taken with my phone of the Zenwatch 3 in a pitch black room, one with normal shutter speed and the other with a 2 second shutter speed. Evidently the 2 second shutter speed shows that the display is in fact not turning off the pixels. The pics were taken when the watch was charging and in ambient mode with a watch face set to true black only.
Can anyone else confirm that this is the case and maybe a reason why? I'm worried that battery life may be affected by this with always on display enabled.
Lastly on a side note, are the black lines that aren't illuminated something to worry about?
Mine is the same, including a similar set of dark lines. I've seen others on Reddit report identical concerns.
frelnik said:
Mine is the same, including a similar set of dark lines. I've seen others on Reddit report identical concerns.
Click to expand...
Click to collapse
Noticed this too, thought I was crazy lol...kinda waste of an AMOLED screen.
Hmmm ok at least I'm not the only one. Hopefully Asus is able to change it in a future update.
Yeah it is weird, black watch faces aren't truly black. I think they did it so watch faces can blend into the color scheme of the watch, if you notice the color overlay on the app launcher
That's because of auto Brightness. Turn it off. This impacts battery life. I observed this on very first day after the purchase. Using manual Brightness since then.
deathgame said:
That's because of auto Brightness. Turn it off. This impacts battery life. I observed this on very first day after the purchase. Using manual Brightness since then.
Click to expand...
Click to collapse
I just tried disabling Auto Brightness but the red tinge of the black background still exists.
blackhand64 said:
I just tried disabling Auto Brightness but the red tinge of the black background still exists.
Click to expand...
Click to collapse
It doesn't happen with me. If I turn off auto Brightness the blacks go complete black. Do you have live display turned on your phones? If so try disabling it. May be this setting depends on your phone. All I can confirm is if I turned auto Brightness off amoled works perfectly.
deathgame said:
It doesn't happen with me. If I turn off auto Brightness the blacks go complete black. Do you have live display turned on your phones? If so try disabling it. May be this setting depends on your phone. All I can confirm is if I turned auto Brightness off amoled works perfectly.
Click to expand...
Click to collapse
Not sure what you mean by live display but I just have a stock S7 Edge. I prefer keeping the auto brightness on for my watch so I guess I'll have to live with it.
blackhand64 said:
Not sure what you mean by live display but I just have a stock S7 Edge. I prefer keeping the auto brightness on for my watch so I guess I'll have to live with it.
Click to expand...
Click to collapse
Live display is when some ROMs allow the screen to have a tint at night time so the blue light from the screen won't affect your eyes at night
Me too have similar display and black line like that.
Glad I'm not the only one with this condition.
I also have those black lines, was about to get a replacement but since I'm not the only one and it doesn't affect overall performance or aesthetics its fine.
Yeah I have also black lines and screen is not completely dark with totally black watch faces
Turning off the auto brightness is not a solution. Its a pain if you had to adjust the brightness all the time