Related
I've tried http://m.romzj.com/rom/42627.htm Flyme OS 4.5.4.3 with 5.1.1 Open Gapps but got as far as WiFi setup then reboots. Anyone else? This looks awesome very smooth but don't stick
Try to use another GApps.
Or don't use GApps at all.
Now I'm downloading latest Flyme to test it (I hate chineese servers), coz I don't know if it contains GApps. If it is a chineese version of Flyme (that is very reasonable), just try another GApps package. Or try to install older version of Flyme.
Does it boot normally without gapps?
No it doesn't boot normally I tried both ways I get as far as WiFi it reboots. With or without gapps it reboots
i've tried with latest version flymeos, and my wifi is working properly without issues, now i got a some problem, how to get root with this rom, lol.. tried with twrp and flyme os account but still not working, lol
cell2011 said:
No it doesn't boot normally I tried both ways I get as far as WiFi it reboots. With or without gapps it reboots
Click to expand...
Click to collapse
Well, I've tried to install it. Installation was suspiciously long, but after it my phone booted normally without gapps. Then I installed Banks Gapps and also had no reboots.
Maybe you miss some wipes before rom installation? I wiped Data, Cache, Dalvik and System.
Maybe Flyme's kernel haven't installed properly. Try to get it from rom zip and flash manually via fastboot.
Saloedov said:
Well, I've tried to install it. Installation was suspiciously long, but after it my phone booted normally without gapps. Then I installed Banks Gapps and also had no reboots.
Maybe you miss some wipes before rom installation? I wiped Data, Cache, Dalvik and System.
Maybe Flyme's kernel haven't installed properly. Try to get it from rom zip and flash manually via fastboot.
Click to expand...
Click to collapse
Did you have Google+ installed on your device ?
Saloedov said:
Well, I've tried to install it. Installation was suspiciously long, but after it my phone booted normally without gapps. Then I installed Banks Gapps and also had no reboots.
Maybe you miss some wipes before rom installation? I wiped Data, Cache, Dalvik and System.
Maybe Flyme's kernel haven't installed properly. Try to get it from rom zip and flash manually via fastboot.
Click to expand...
Click to collapse
Did you download 12/21 build or 12/30?
Saloedov said:
Well, I've tried to install it. Installation was suspiciously long, but after it my phone booted normally without gapps. Then I installed Banks Gapps and also had no reboots.
Maybe you miss some wipes before rom installation? I wiped Data, Cache, Dalvik and System.
Maybe Flyme's kernel haven't installed properly. Try to get it from rom zip and flash manually via fastboot.
Click to expand...
Click to collapse
How do I flash kernel manually? What is the command? Also should I flash rom and kernel reboot then gapps?
hi guys! i can't flash it on my xt1052.. is there a way to flash it or it is compatible just with xt1058?
thanks a lot!
rydebaas said:
Did you have Google+ installed on your device ?
Click to expand...
Click to collapse
I used minimal gapps package which doesn't contain google+.
Also, I've mentioned wrong gapps package. Actually I used this one: https://www.androidfilehost.com/?fid=24345424848488210
---------- Post added at 04:16 PM ---------- Previous post was at 04:16 PM ----------
cell2011 said:
Did you download 12/21 build or 12/30?
Click to expand...
Click to collapse
12/30.
---------- Post added at 04:27 PM ---------- Previous post was at 04:16 PM ----------
cell2011 said:
How do I flash kernel manually? What is the command? Also should I flash rom and kernel reboot then gapps?
Click to expand...
Click to collapse
Well, you open ROM zip, then you'll see there a list of directories and files. You need to exctract boot.img.
Then you need to connect your phone to PC and flash that file with command: fastboot flash boot boot.img.
I'm not sure about that due to Moto's weird process of flashing via fastboot.
Try to do this:
1. Wipe system, cache, dalvik and data;
2. Install ROM;
3. Install this gapps package: https://www.androidfilehost.com/?fid=24345424848488210
4. Reboot.
Then, if phone won't boot, proceed all steps again and then flash kernel manually.
I hope it will help.
---------- Post added at 04:34 PM ---------- Previous post was at 04:27 PM ----------
daede86 said:
hi guys! i can't flash it on my xt1052.. is there a way to flash it or it is compatible just with xt1058?
thanks a lot!
Click to expand...
Click to collapse
Well, I've looked through installation script and I see no reason for this ROM not to be compatible with XT1052.
EDIT: i've downloaded again the file but i still get e:Error executing updater binary in zip /sdcard/flymeOS+4.5.3R.zip'
should i try to flash an older version of twrp? i'm on 2.8.7 right now..
Funny thing is when it optimizes it doesn't reboot. I might have to try the flash kernel after rom gapps and reboot. I got it to where I see home screen all the apps but when I try to sign in my account it reboots
Can I flashify the boot img of rom? After flashing rom and gapps? Then reboot? Do I just extract boot img file from rom or extract content of boot img too? Can in TE too instead of fastboot
Flyme OS Moto X 2013 Tutorial
Need:
1) Unlocked Bootloader.
2) Latest TWRP installed.
3) Downloaded ROM from.
4) Open Gapps recommended.
How:
1) Wipe Data/system/cache in TWRP.
2) Install zip – select rom. Wait ~ 10 min.
3) Install gapps.
4) Wipe Cache/dalvik cache.
5) Reboot. Wait ~ 10 min. and done!
PS: You can find download links on 4pda forum, and review on Youtube.
Hello,
I have a problem with my 3T. I updated magisk yesterday via magisk manager from 11.2 to 11.5. After the update my screen was completely black, the funny thing is if I press my power button long enough the reboot menu pops up. I can boot into recovery, the bootanimation is working but the ROM itself isn't visible.
I tried reflashing magisk via recovery, ROM+magisk via recovery, ROM via recovery and uninstalled magisk via recovery. Nothing works, the last thing I can try is a complete factory reset.
Does anyone has maybe an idea what else I can do?
I would appreciate any form of hint
yup i had the same thing, used the brick recovery tool and was fine but when i re unlocked the bootloader i forgot it wipes internal data and lost all my pics music and titanium backups. Very annoyed to say the least.
EuEra said:
yup i had the same thing, used the brick recovery tool and was fine but when i re unlocked the bootloader i forgot it wipes internal data and lost all my pics music and titanium backups. Very annoyed to say the least.
Click to expand...
Click to collapse
That solved my issue, didn't realize that I really bricked my device. Sadly it wiped my data also!
Thanks for your advice!
I've experienced this about 3 times over the last 4 months, and had to restore a full backup each time. Basically afraid to do anything with Magisk at this point. This really needs to be fixed.
It's probably because the Magisk updater is interfering with the kernel.
Every time Magisk is updated, I always dirty flash my current ROM and flash the new version of Magisk over it. I can then flash a custom kernel and everything still works flawlessly.
Anova's Origin said:
It's probably because the Magisk updater is interfering with the kernel.
Every time Magisk is updated, I always dirty flash my current ROM and flash the new version of Magisk over it. I can then flash a custom kernel and everything still works flawlessly.
Click to expand...
Click to collapse
I did that when i switched from official to open beta, and everything went fine, then i installed a module, rebooted and got blackscreen again
Anova's Origin said:
It's probably because the Magisk updater is interfering with the kernel.
Every time Magisk is updated, I always dirty flash my current ROM and flash the new version of Magisk over it. I can then flash a custom kernel and everything still works flawlessly.
Click to expand...
Click to collapse
It's not the kernel, the black screen has occurred twice when just installing a module with no modifications to /boot.
dre-z said:
Hello,
I have a problem with my 3T. I updated magisk yesterday via magisk manager from 11.2 to 11.5. After the update my screen was completely black, the funny thing is if I press my power button long enough the reboot menu pops up. I can boot into recovery, the bootanimation is working but the ROM itself isn't visible.
I tried reflashing magisk via recovery, ROM+magisk via recovery, ROM via recovery and uninstalled magisk via recovery. Nothing works, the last thing I can try is a complete factory reset.
Does anyone has maybe an idea what else I can do?
I would appreciate any form of hint
Click to expand...
Click to collapse
Fix for me was to boot twrp, manually wipe system, data, caches etc (NOT internal storage box), then clean install the OS in twrp. Keeps your data and encryption then.
Just happened again. Ugh. Anybody manage to recover their existing data partition from this?
---------- Post added at 01:21 PM ---------- Previous post was at 01:15 PM ----------
I think this is the fundamental issue: https://github.com/topjohnwu/Magisk/issues/185
I've not experienced anything like this on my OP3T. I did see something similar on my Nexus 6 a couple of times, but could never quite get a grip on what caused it (I had a lot of other issues with that device ).
Is there any particular module that has been known to cause the issue (for testing)?
Didgeridoohan said:
I've not experienced anything like this on my OP3T. I did see something similar on my Nexus 6 a couple of times, but could never quite get a grip on what caused it (I had a lot of other issues with that device ).
Is there any particular module that has been known to cause the issue (for testing)?
Click to expand...
Click to collapse
Nope, I've had this happen with multiple modules, including App Systemizer, ad-free YouTube, and OP3/T channel bonding enabler. Based on the file size changes in magisk.img, I legitimately think that the linked GitHub issue is the root cause. I think the only consistent repro is to flash different versions of modules while rebooting repeatedly.
Problem might be corrupted magisk.img during resize.
vemacs said:
Just happened again. Ugh. Anybody manage to recover their existing data partition from this?
---------- Post added at 01:21 PM ---------- Previous post was at 01:15 PM ----------
I think this is the fundamental issue: https://github.com/topjohnwu/Magisk/issues/185
Click to expand...
Click to collapse
I had the same issue when trying to install xposed 87.1 through MagiskManager (black screen and repeated vibration).
On my J5 I just removed the battery and booted into twrp, then I uninstalled magisk with the uninstall-zip, wiped dalvik an cache, rebooted once and everything works.
I reinstalled magisk in twrp and installed xposed 87.0 through the material xposed-installer and everything works.
No data loss.
The issue on GitHub was closed with a comment saying that it's likely fixed in latest Magisk (13.1). FWIW I haven't seen it occur after running 13 beta for a while.
My op3 was bricked again today after the update. Funny thing is, this time I had not installed any module. So the problem doesn't seem to be fixed.
pls someone should help me i tried to root my android v10 infinix note8i with magisk patch boot img file using adb fastboot when i tranfer the file and reboot the phone is not booting and not gettig into recovery mode, just blank screen when a turn on pls help me out with solution
same but my problem is kind of stupid because someone rooted my phone in another way and magisk says it is installed and needs updating but it is actually not and the biggest problem is when i unroot my phone the stupid rmm locks gets enabled and boom i can't open twrp recovery because it is not an offical binary so i got stuck there i flashed a stock rom got it fixed but i still can't do it
I have created an automated list of the Oreo nightly builds, so you can go to check the latest one whenever you want, and get download link and changelog link.
https://funkyhuawei.club/mimix2builds
This has a full index of all Oreo builds, and is updated every six hours.
I can't offer any support or any guarantee it will stay up, or that the links will work, or that it will continue to find new builds, but so far it works.
It helps a lot! Thanks!
Sent from my Mi MIX 2 using Tapatalk
Very very thanks to U.....
Great news, thank you very much.
If i flash this nightly build, does i recive OTA updates ?
Greetings
How do I flash?
Always get Error 7, flashed Global beta first, but no change in getting error 7
exception84 said:
How do I flash?
Always get Error 7, flashed Global beta first, but no change in getting error 7
Click to expand...
Click to collapse
Flash Oreo twrp
allrockedout said:
Flash Oreo twrp
Click to expand...
Click to collapse
you hab a link for it. pls?
exception84 said:
you hab a link for it. pls?
Click to expand...
Click to collapse
Ive noticed on first install it wont boot. So to fix this, wipe data in twrp, flash rom first than let it boot to system without flashing magisk. Than connect to pc and flash oreo twrp again because twrp replaced with stock recovery. Than follow below instructions.
Also I've noticed sometimes you need to flash magisk 14.5...2 times for it to boot.
Oreo twrp 3.2.1.0
https://drive.google.com/file/d/1LFyPJu6Uk7bkqdwbsswHWt2Q_pZFVghG/view?usp=drivesdk
---------- Post added at 05:29 PM ---------- Previous post was at 05:28 PM ----------
install Oreo beta in twrp. Reboot back into twrp. Than flash magisk 14.5. it's the only one that will boot for me. Than reboot.
magisk 14.5
https://drive.google.com/file/d/1domz8I7JVFdNS68nfWQaaqaRyAJteVxO/view?usp=drivesdk
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
Yes, thats actually my problem now. happening the same for me
---------- Post added at 05:46 PM ---------- Previous post was at 05:37 PM ----------
itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
try first boot without flashing magiskbefore, then it worked for me.
itsdan313 said:
What is the procedure for installing these ROMs. I tried before to install twrp, format data, copy rom from PC, flash rom and magisk. But when I go to boot up it just reboots on the "mi" screen twice and goes to recovery.
Click to expand...
Click to collapse
Does it boot if you don't flash magisk?
Mackay53 said:
Does it boot if you don't flash magisk?
Click to expand...
Click to collapse
Haven't tried to flash without magisk, but would it make sense? Seems most people I have read are able to do so. Formatting data only with the Oreo twrp correct?
itsdan313 said:
Haven't tried to flash without magisk, but would it make sense? Seems most people I have read are able to do so. Formatting data only with the Oreo twrp correct?
Click to expand...
Click to collapse
Yeah don't need to flash magisk but will loose Oreo recovery.
Regarding flashing them, an alternative to using twrp is flashing with fastboot -- If there is interest I might make a tool to help with that.
Just installed latest Build.
Runs super fluid, no major issues so far.
Just noticed that some settings in Chronos causing a force close, nothing too important.
And iphone X gestures are goddamn awessome!
FYI new build is up. 8.1.18 -- check link in original post for download link. Changelog just mentions stability fixes.
duraaraa said:
Regarding flashing them, an alternative to using twrp is flashing with fastboot -- If there is interest I might make a tool to help with that.
Click to expand...
Click to collapse
I might be interested to try that out!
itsdan313 said:
I might be interested to try that out!
Click to expand...
Click to collapse
There is a fastboot application that works really well.
I am unable to alter the brightness on the Oreo TWRP. Anyone have any ideas? Thanks
is dirty flash possible? Or via update function in miui?
Or do I have to setup the mix2 new every time?
(Just ask before flashing new build)
Hello!
I have a weird problem after I updated Magisk to 18.1 on my OnePlus 6T. It installed properly and the phone will also properly boot. But just when it arrives at the lockscreen, the phone will show right away the message "Shutting down phone" - and then the phone will restart to the recovery. Why is it doing this and how can I fix it? Is there somehow a restart command in the autostart of my phone?
I tried already reflashing the system image. This made it possible to start the phone again. But after installing Magisk again, it will do the reboots again.
Thanks for any help!
I was able to fix my problem!
Was doing it the following way (in case sb else has this problem as well):
- Boot twrp from fastboot (the official twrp - with bluspark it didn't work because it doens't decrypt the data partition)
- Run the Magisk uninstaller zip
- Run the Magisk installer zip
- Phone will boot normally again
Just reflashing the factory image wasn't enough in my case. There must have been some files left from Magisk somewhere. Removing them with the Magisk uninstaller fixed the problem.
Thanx a bundle, works...
thanks for sharing this solutions!
---------- Post added at 10:28 PM ---------- Previous post was at 10:18 PM ----------
1651321 said:
I was able to fix my problem!
Was doing it the following way (in case sb else has this problem as well):
- Boot twrp from fastboot (the official twrp - with bluspark it didn't work because it doens't decrypt the data partition)
- Run the Magisk uninstaller zip
- Run the Magisk installer zip
- Phone will boot normally again
Just reflashing the factory image wasn't enough in my case. There must have been some files left from Magisk somewhere. Removing them with the Magisk uninstaller fixed the problem.
Click to expand...
Click to collapse
It worked on the OnePlus6 after updating the new OOS and reinstalling twrp and magisk. you saved my life !!
tnx dude, it worked.
oos beta 13 and magisk 19.4 and still works, you just saved me hours of troubleshooting. thanks.
thanks
i was facing the same issue on OP 5T, it works fine
Worked for me too!
Man oh man! You saved my beautiful sunday.
Just came here to confirm it worked perfectly in my OP5T after applying 9.0.9.
Same procedure to the letter thanks!
1651321 said:
i was able to fix my problem!
Was doing it the following way (in case sb else has this problem as well):
- boot twrp from fastboot (the official twrp - with bluspark it didn't work because it doens't decrypt the data partition)
- run the magisk uninstaller zip
- run the magisk installer zip
- phone will boot normally again
just reflashing the factory image wasn't enough in my case. There must have been some files left from magisk somewhere. Removing them with the magisk uninstaller fixed the problem.
Click to expand...
Click to collapse
thank you, thank you so much
I tried to flash different gsi images and always get bootlop to fastboot mode.
jlorf7 said:
I tried to flash different gsi images and always get bootlop to fastboot mode.
Click to expand...
Click to collapse
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
jlorf7 said:
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
Click to expand...
Click to collapse
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
rajnathr said:
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
Click to expand...
Click to collapse
I know but with aonly always boot to fastboot mode, check in this it shows ab https://github.com/phhusson/treble_experimentations/wiki
I posted a mini guide in another thred: https://forum.xda-developers.com/showthread.php?p=80641265
Enviado desde mi NX629J mediante Tapatalk
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Irwan Fauzi said:
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Click to expand...
Click to collapse
This Friday hope I will be testing maximum no. of GSI image and will be posting which boots and working better for Redmagic 3 in a separated thread for discussion with the community.
Also will backup such as Game launcher, LED Strip and other important app using titanium backup and will try to install as system to check if they are working or not.
Just flash the Chinese rom then flash TWRP and then go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development and pick any rom you want some of them even have GAPPS included
---------- Post added at 04:37 PM ---------- Previous post was at 04:31 PM ----------
If you're having trouble with GAPPS follow this steps
1) Boot into TWRP
2) Flash latest GSI img
3) Resize system file system (necessary on my device otherwise gapps will not install)
- Wipe -> Advanced -> select system -> resize file system
4) Flash pico or mini or aroma which ever you want gapps zip
6) Flash magisk zip
7) reboot
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you try ab version?
jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Irwan Fauzi said:
Did you try ab version?
Click to expand...
Click to collapse
yes
suzook said:
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Click to expand...
Click to collapse
yes, yes and yes
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Do you mind testing if game space work?
h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Irwan Fauzi said:
Do you mind testing if game space work?
Click to expand...
Click to collapse
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
vimalrajan1988 said:
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Click to expand...
Click to collapse
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Red magic 3 treble
That's the thing with this phone. Everything is random. I did use the repair tool and flashed the latest global version. But I am unable to flash the gsi again. It keeps getting stuck in fastboot screen. But if I select recovery from fastboot. It does goes to twrp recovery. But nothing after that. I hope someone can make a custom rom with Nubia launcher.
Red magic NEEDS to provide us with fastboot images...We have no real way to recover from a semi brick WTF!
h4cxxc0r3 said:
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Click to expand...
Click to collapse
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Irwan Fauzi said:
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Click to expand...
Click to collapse
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
suzook said:
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
Click to expand...
Click to collapse
I use termux app from play store.. There's a guide on xda how to extract system.dat.br without pc.. link