Related
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.
proag said:
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.
Click to expand...
Click to collapse
Thank you. I didn't notice the extra zero and didn't think it was unoffical.
Sincerely
John
jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You are on an un-official modefied version.
The fake version is 7.2.4.0.0 <- your version.
The real official and supported by Xiaomi version is 7.2.4.0
Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!
androFRUST said:
Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!
Click to expand...
Click to collapse
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all
TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
Thanks for the reply! Before proceeding, I actually received the SMS to unlock the bootloader but im still at work so I cant go back and attempt the unlock. So just trying to manage my expectations here.
Is it safe to assume that all I need to do now is log in to the unlock tool by miui and unlock? because im still on 7.2.4.0.0 (the unofficial discontinued rom) and I have no way of flashing it to any other roms. My last attempt last night was again, stuck at 52% after a nights worth of wait! TT
---------- Post added at 03:01 AM ---------- Previous post was at 02:49 AM ----------
xtachix said:
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all
Click to expand...
Click to collapse
Thanks for the help. I will attempt this as a last resort. I just received the SMS to unlock my bootloader. Hopefully its as simple as logging in and unlocking so I can get rid of this pesky 7.2.4.0.0 supposed "Global" rom.
i have successfully flashed to global rom!!! but now i have no audio coming from the speakers!!!! is it just my luck!!!??? and after reflashing again.. its completely dead.. its goes into the sign in to miui welcome page and just goes insane.. like to the point where i cant even select options and and random menu sounds keep coming up.. cant even turn off i had to reboot to fastboot.. is a goner? sighs..
7.2.4.0.0 to Resurrection Remix (CM13)
- unlock bootloader
- flash TWRP with fastboot
- install Resurrection Remix
- install GApps
- reboot, now it's say Google play stopped.
- go back to TWRP
- wipe data
- reboot and everything is working
Hi everybody, I'm new on xda and I just received my P9, chinese version. Great phone by the firt impression, but after a some time spent configuring it I still have some "issues":
- I'm not able to download the googe dialer and contacts apps from the play store
- I only receive notifications from some apps (ie whatsapp and facebook) if they are opened in the multitasking (I know, there is already at least one thread on this topic but I didn't found any solution)
- I can't find a way to change the action associated to the long press of the home button and get rid of hi voice (I reallt want to try now on tap)
If anyone know how to individually solve these problems please tell me
Anyway, hoping to solve them and get rid of all the little residues of chinese language, I'm thinking of trying to install the international firmware: first of all, is it possible? From what I've read I must flash the oeminfo and the dload files, so I suppose that after unlocking the bootloader I have to install TWRP, do I also have to root the phone?
Last thing, how can I backup the current oeminfo and firmware in case anything goes wrong or I decide/need to revert the process?
Thanks for the attention and sorry for my english
Come on guys, can anyone help me?
up
I have the same problem! I would like to flash the international firmware but I can't find any tutorial. Someone can help us?
up
up
Desperate for some help.... Huawei P9 - AL00 Chinese phone
Hi guys,
BUMP this thread.
I too have a Huawei P9 - AL00 - EVA AL00C00B176 - EMUI 4.1 on android 6.0 | I would like to flash the phone with an L09 European firmware (standard). I've been reading through a lot of threads and here is what I've done so far:
used the DC unlocker to unlock my phone and get bootloader code - successful
used the SRKtool to try install TWRP (to get root). It says installed but I cannot boot to TWRP - just boots normally or boots into erecovery - have tried installing TWRP via three methods - fastboot, SRK, Paulobreun, "spanish one", etc. None have worked so far. Have tried switching phone off, on with volume up + power button. NOTHING.
SRK tool is excellent but haven't been able to get past root - ADB server WAITING FOR DEVICE. Fastboot mode is the only mode that seems to work - have once been able to get SRK tool to load correctly in Debug mode.
Have the phone in debugging mode and have tried using the *#*#2846579#*#* to set to manufacturing mode - waiting for device endures. ONLY DC Unlocker seems to connect properly once in manufacturing mode * note - I don't have OEM unlocker option in Debugger.
Please can someone assist guys like us to get these awesome phones working as needed
Many thanks,
The_JooP
It is Volume DOWN + power button. Not up.
And if you have SRK tool, there is a Utility menu where you can boot your phone in Recovery, Bootloader and eRecovery mode.
The AL00 actually has the latest and quickest updates. It just updated to B183 yesterday.
If you want the European version, I think you should re-brand your phone before you flash any European firmware.
There is a tutorial for re-branding:
http://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045
Up this thred!
I'm in the same situation with AL-10 Chinese version.
Want to flash Europe/international version.
I downloaded SRK tool and saw there that oeminfo for EVA-L29 is not available.
After flash oeminfo/wipe I can flash the version by dload?
Sent from my Huawei P9 using XDA Labs
The_JooP said:
used the DC unlocker to unlock my phone and get bootloader code - successful
used the SRKtool to try install TWRP (to get root). It says installed but I cannot boot to TWRP - just boots normally or boots into erecovery - have tried installing TWRP via three methods - fastboot, SRK, Paulobreun, "spanish one", etc. None have worked so far. Have tried switching phone off, on with volume up + power button. NOTHING.
Click to expand...
Click to collapse
Accordingly to the TWRP installation guide, many devices will replace your custom recovery automatically during first boot, so After typing fastboot reboot, hold the key combo (Volume UP, no need power button in this case) and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install. (source: https://twrp.me/devices/huaweip9.html)
So, you shouldn't let your phone reboot "normally", but you must force it to reboot on TWRP from the beginning.
mouwen said:
It is Volume DOWN + power button. Not up.
Click to expand...
Click to collapse
Volume DOWN is for fastboot, but for enter in recovery mode, Volume UP is correct.
mig0z said:
- I only receive notifications from some apps (ie whatsapp and facebook) if they are opened in the multitasking (I know, there is already at least one thread on this topic but I didn't found any solution)
Click to expand...
Click to collapse
I solved this issue with the right settings in the Permission manager: you have to launch the Permission manager, choosing the Facebook, Whatsapp,... or the application you need to get notifications and be sure that is selected the option "App auto-launch" (in this case if the app is not open in multitasking, it will be by herself).
You have also to be careful to the Phone Manager application (is not a Settings option, is just an application herself) because has the "Power usage firewall (power-intensive apps)" function that if is not well setup, it literally kills the application that are running on background. So in the case you need notifications, you need to allow functions like "System wakeup" and "Keep running after screen off". "Power-intensive prompt" is good to be disabled in the case of whatsapp-like applications.
mig0z said:
- I can't find a way to change the action associated to the long press of the home button and get rid of hi voice (I reallt want to try now on tap)
Click to expand...
Click to collapse
I also tried everywhere and I didn't found anything. I will try to search if there is any system file that could be modified (of course, will be necessary to have rooted phone).
NOTE:
I have an EVA-AL00 (Chinese version) but I keeped the stock rom and most of the application (I just removed the 100%chinese-unusefullhere applications). I honestly didn't found any big issue that push me to change to an international rom, but if for any reason I will decide to install it, you will be the first to know.
ScareIT said:
Accordingly to the TWRP installation guide, many devices will replace your custom recovery automatically during first boot, so After typing fastboot reboot, hold the key combo (Volume UP, no need power button in this case) and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install. (source: https://twrp.me/devices/huaweip9.html)
So, you shouldn't let your phone reboot "normally", but you must force it to reboot on TWRP from the beginning.
Volume DOWN is for fastboot, but for enter in recovery mode, Volume UP is correct.
I solved this issue with the right settings in the Permission manager: you have to launch the Permission manager, choosing the Facebook, Whatsapp,... or the application you need to get notifications and be sure that is selected the option "App auto-launch" (in this case if the app is not open in multitasking, it will be by herself).
You have also to be careful to the Phone Manager application (is not a Settings option, is just an application herself) because has the "Power usage firewall (power-intensive apps)" function that if is not well setup, it literally kills the application that are running on background. So in the case you need notifications, you need to allow functions like "System wakeup" and "Keep running after screen off". "Power-intensive prompt" is good to be disabled in the case of whatsapp-like applications.
I also tried everywhere and I didn't found anything. I will try to search if there is any system file that could be modified (of course, will be necessary to have rooted phone).
NOTE:
I have an EVA-AL00 (Chinese version) but I keeped the stock rom and most of the application (I just removed the 100%chinese-unusefullhere applications). I honestly didn't found any big issue that push me to change to an international rom, but if for any reason I will decide to install it, you will be the first to know.
Click to expand...
Click to collapse
The main point to me is about the integration of the softwares.
I basically use Google for everything. But when you have the Chinese ROM, Uber for example will launch Baidu maps instead of Google's. The MI Fit app, to use with Mi band will not be integrated with Google fit, but other chinesse app. It wouldn't be a problem if the app has English or PT-BR support, but most of the time they don't.
Sent from my Huawei P9 using XDA Labs
duilioneto said:
The main point to me is about the integration of the softwares.
I basically use Google for everything. But when you have the Chinese ROM, Uber for example will launch Baidu maps instead of Google's. The MI Fit app, to use with Mi band will not be integrated with Google fit, but other chinesse app. It wouldn't be a problem if the app has English or PT-BR support, but most of the time they don't.
Sent from my Huawei P9 using XDA Labs
Click to expand...
Click to collapse
If the app is only in Chinese language or is only based with chinese services I really recommend to uninstall it (you can do the normal Uninstall procedure with most of Apps), apps that I uninstalled immediately are for example Videos (Huawei Videos), HiWallet, HiPay, Baidu, Vmall and few others that had chinese name.
I just tried to use Uber and it launches correctly Google Maps. Of course, I repeat, you have to uninstall Baidu.
If you use Google for everything, probably you are also using Chrome. In this case the stock (Chinese) browser cannot be uninstalled (because is a system app) but instead of "Uninstall" you can "Disable" it (same menu for uninstalling, just different text): after disabling it, Chrome (or any other browser) will became the default one.
Just double checked on my Huawei P9 EVA-AL00C00B183 (but I'm sure is the same with B176 also)
P.S.
I don't know MI Fit, but if we are speaking about the Xiaomi application, we are speaking about a completely different (and quite off topic) smartphone philosophy.
mig0z said:
- I can't find a way to change the action associated to the long press of the home button and get rid of hi voice (I reallt want to try now on tap)
Click to expand...
Click to collapse
I just posted a guide here: How to replace HiVoice vocal assistant on Chinese versions of P9 that just explain step-by-step how to remove HiVoice. With my own surprise, Now on Tap replaced it by default (but I already had Google Now installed).
mig0z said:
- I'm not able to download the googe dialer and contacts apps from the play store
Click to expand...
Click to collapse
I found google dialer is very hard to install in non-Nexus devices and I suppose for the P9 will be the same. I didn't try 3rd parties dialers, yet, but I want to do as soon as possible. Anyway the stock dialer is working well, except for the "Yellow pages" junk, which has only the title translated and all the rest is Chinese only
Huawei P9 recovery is weird, hold power + vol up is Huawei's eRecovery, power + vol down is FASTBOOT, and power + vol up + vol down is TWRP, hope this helps anyone.
has anyone tried using the OTA links to force update to Nougat on the AL00?
I've been wanting to update my AL00, but the OTA links all seem to be for the international versions (L09/L19) so i just want to know if they'll work for an AL00..
(getting really sick of Emui 4 constantly darkening my homescreen wallpaper)
Hello
I got Android 10 Update today for my Mi A2, after update I've unlocked my phone but suddenly I got a message it contains "Google Services Framework Keeps Stopping" With Two Choises "App Info/Stop App" After Pressing One Of Them, The Device Is Getting Laggy Without Any Respond, All What I Can Do Is "Rebooting/Activaing Fastboot" Nothing Else, I'm Now Downloading The Official ROM Again From XDA "https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835" To Re-Install The Android 10 Again, Please... Anyone Can Help Me?
Rafael Phoenix said:
Hello
I got Android 10 Update today for my Mi A2, after update I've unlocked my phone but suddenly I got a message it contains "Google Services Framework Keeps Stopping" With Two Choises "App Info/Stop App" After Pressing One Of Them, The Device Is Getting Laggy Without Any Respond, All What I Can Do Is "Rebooting/Activaing Fastboot" Nothing Else, I'm Now Downloading The Official ROM Again From XDA "https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835" To Re-Install The Android 10 Again, Please... Anyone Can Help Me?
Click to expand...
Click to collapse
Use mi flash after unlocking bootloader
Rafael Phoenix said:
Hello
I got Android 10 Update today for my Mi A2, after update I've unlocked my phone but suddenly I got a message it contains "Google Services Framework Keeps Stopping" With Two Choises "App Info/Stop App" After Pressing One Of Them, The Device Is Getting Laggy Without Any Respond, All What I Can Do Is "Rebooting/Activaing Fastboot" Nothing Else, I'm Now Downloading The Official ROM Again From XDA "https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835" To Re-Install The Android 10 Again, Please... Anyone Can Help Me?
Click to expand...
Click to collapse
I faced the same issue after updating to android 10 and just after enabling gesture navigation. Solved this way:
force restart (hold power button)
boot in safemode (holding volume down during the booting)
disable gesture navigation and use 3 button nav bar
clear storage for google services framework, google play services and play store
update google play services
maybe just clearing data and updating google play services is enough.
Hello,
I tried to update to Android 12 to see the new functionalities, I've done it quite some times so I knew what I was doing. But actually... I came accross a big problem.
After that I wanted to go back to the Android 11 version, and so I launched Twrp again, but it didn't boot the same way it usually does. No asking for password, no changing language available, and no data visible on phone (where you choose to install magisk for example)
And so I searched a way to reboot the phone seeing I wasn't able to do anything... but the fun comes after. In that new version, the power button doesn't reboot/stop the phone anymore, it's done with that accessibility pop-up you got on the menu. So, I was stuck inside Twrp.
I fount a reboot section, and I tapped on it, but it seems it wasn't the actual reboot..
Now I'm stuck with a black screen, phone doesn't start, no fastboot, no recovery mode available whatsoever when I press the combination of Volume +/- and power button. Pressing the three for a minute didn't help either. I tried everything.
My phone is apparently stuck in EDL mode, beeing recognized as COM3 on my computer.
I tried flashing it with XiaomiFlash, with the Android 11 12.5.9.0 SKBMIXM version but either it says the phone doesn't answer, or "write time out" or something.
My photos are saved on google and my app are mostly games that are linked with google account so I pretty much doesn't care about factory resetting I just want the access back now.
Is there a free solution I can do by myself ? (not going to give the access to some random telegram guys I don't know, I have read some messages)
As it's detected by the PC there is something that might be done, but that's not in the territory of things that I know sadly..
If someone can help, that would be immensely appreciated.
Reishin Sama said:
Hello,
I tried to update to Android 12 to see the new functionalities, I've done it quite some times so I knew what I was doing. But actually... I came accross a big problem.
After that I wanted to go back to the Android 11 version, and so I launched Twrp again, but it didn't boot the same way it usually does. No asking for password, no changing language available, and no data visible on phone (where you choose to install magisk for example)
And so I searched a way to reboot the phone seeing I wasn't able to do anything... but the fun comes after. In that new version, the power button doesn't reboot/stop the phone anymore, it's done with that accessibility pop-up you got on the menu. So, I was stuck inside Twrp.
I fount a reboot section, and I tapped on it, but it seems it wasn't the actual reboot..
Now I'm stuck with a black screen, phone doesn't start, no fastboot, no recovery mode available whatsoever when I press the combination of Volume +/- and power button. Pressing the three for a minute didn't help either. I tried everything.
My phone is apparently stuck in EDL mode, beeing recognized as COM3 on my computer.
I tried flashing it with XiaomiFlash, with the Android 11 12.5.9.0 SKBMIXM version but either it says the phone doesn't answer, or "write time out" or something.
My photos are saved on google and my app are mostly games that are linked with google account so I pretty much doesn't care about factory resetting I just want the access back now.
Is there a free solution I can do by myself ? (not going to give the access to some random telegram guys I don't know, I have read some messages)
As it's detected by the PC there is something that might be done, but that's not in the territory of things that I know sadly..
If someone can help, that would be immensely appreciated.
Click to expand...
Click to collapse
Global A12 is the bricked rom of the year.... There praticaly any problem with the chinese A12.
Bad news, you will paid approximatively 25/30 $ for unbrick your device, it's the only possibility, because only a certified xiaomi account can unlock EDL on your Mi account.
Good news, if you want try A12, Xiaomi.eu A12 is out, MiuiMix also... And it's really more safe.
I PM you a link for a Unbrick service
So something similar happens to me, if that's what you are referring too, TWRP gets stuck on a12 it won't respond when TWRP is injected and you want to go to recovery since it won't decrypt you will see that it shows 0 on internal memory and With the touch screen not responding, so you have to keep the power button press for awhile for it to reboot, TWRP will work but only when you boot to it from fastboot. That's how I been able to flash CN beta a12, Xiaomi EU a12, and stock Global a11(not beta version) I went back and forth yesterday from Xiaomi EU Stable, to CN beta to Xiaomi eu beta and back to Xiaomi eu Stable.
Yeah it's what happened to me, but I tried pressing the power button for a long time (1 minute or so) and nothing. Did you do it longer ?
My phone isn't actually detected by ADB or Fastboot, only EDL (COM3)
Idk if that's any recoverable..
Pho3nX said:
Global A12 is the bricked rom of the year.... There praticaly any problem with the chinese A12.
Bad news, you will paid approximatively 25/30 $ for unbrick your device, it's the only possibility, because only a certified xiaomi account can unlock EDL on your Mi account.
Good news, if you want try A12, Xiaomi.eu A12 is out, MiuiMix also... And it's really more safe.
I PM you a link for a Unbrick service
Click to expand...
Click to collapse
Can't I find a way to do it myself ? There must be something.
Reishin Sama said:
Can't I find a way to do it myself ? There must be something.
Click to expand...
Click to collapse
Nothing, impossible if you don't have a certified account and only people working for Xiaomi have this account
Pho3nX said:
Nothing, impossible if you don't have a certified account and only people working for Xiaomi have this account
Click to expand...
Click to collapse
Good to know, if I need those service will totally let you know thanks !
There is no solution except through EDL mode, through a person who has access authorization.
Unfortunately, I also went through this. The problem is that the phone is repaired by connecting the platform to your computer through a "vewever" program.
After this procedure I was hacked through my AMAZON account. I assume my passwords and passwords were stolen.
That's why it uses a computer that doesn't store data, especially the browser.
ok I flashed eu, chinese and global roms on my phone before no problem. I'm coming from the one os android11 rom. i just installed miui 13 android 12 and it flash fine and all but I cannot get to the actual phone homescreen. its like a loop. the traditional setup wizard ask me stuff like do I want to connect to Wi-Fi, transfer apps from my old phone, no matter how I approach it, it say couldn't sign in, try again later (it never gives the option to sign into google). even if I click skip setup button it also say couldn't sign it. all of this is happening 100% in setup wizard. So no I cant go to app manager play store settings
hope someone else experienced this and can help me out.