Related
....!!!!PLEASE ONLY POST ABOUT XPOSED AND MODULES YOU ARE USING ON AT&T STOCK FIRMWARE NOT THE UNLOCKED U FIRMWARE AS THERE MAY BE DIFFERENCES IN EXPERIENCE AND USABILITY THAT MAY CAUSE PROBLEMS!!!!....
This thread is for anyone to posted what Xposed modules you use and if they are or are not working. It will also be a thread to let others see who are new to xposed or havent used it on their s7 edge yet what is and isn't working as well as identifying what modules should be avoided because they are causing problems with the phone ex. lag, freezing, bootloops, other. please comment what you are using along with your experience and any news related to xposed and or modules. i will (when i have time) edit this post with what i have installed what does and doesnt work as well as posting what others put here. of course there will be a working and not working section that will be updated when things break or become useable. hope this thread helps some people out and saves some time and trouble.
....AGAIN!!!!PLEASE ONLY POST ABOUT XPOSED AND THE MODULES YOU ARE USING ON STOCK AT&T FIRMWARE ONLY AS THERE CAN BE DIFFERENCES BETWEEN WHAT DOES AND DOESNT WORK ON STOCK FIRMWARE AND THE UNLOCKED U FIRMWARE!!!!....
....WORKING MODULES ARE IN POST #2....
....modules that work for me and or others....will be update as i use working modules or people post or pm working modules....i will not be including modules that do not work just to save time and space. At this point in time just assume it doesnt work unless someone can confirm it, dont want to kill your phone!!!!....
1. Greenify
2. Amplify
3. Xtouchwiz (turned some setting off that were on by default!!!! Fake system status i'm guessing is best turned off!!!!)
4. Neopower menu
rob219 said:
****ONLY ANPLIFY AND GREENIFY ARE WOTKING OUT OF THE ONES I HAVE INSTALLED IN THE PICS, ALL THE OTHER MODULES SHOWN ARE NOT WORKING AS OF NOW ON MY DEVICE****
Click to expand...
Click to collapse
Did you have any luck with RootCloak or XTouchWiz?
TehPirate_ said:
Did you have any luck with RootCloak or XTouchWiz?
Click to expand...
Click to collapse
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.
rob219 said:
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.
Click to expand...
Click to collapse
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.
TehPirate_ said:
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.
Click to expand...
Click to collapse
i have since installed xtouchwiz and have no problems i turned a few things off that were on by default. i turned off fake system status and the disable scaling feature that was on. it works. rootcloak i have also reinstalled but i don't think it works. im not sure, i know snapchat has problems logging in if your rooted and i am experiencing this problem with or without rootcloak so i believe it is not working but i could be wrong.
Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?
RileyIssKing said:
Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?
Click to expand...
Click to collapse
flashfire
Hi,
I'm running stock ROM with TWRP recovery.
I've managed to successfully root my Note with Magisk.
Somehow I noticed that my device loses root after a reboot and sometimes even randomly. When I go into the custom recovery and flash Magisk 14 or 14.3 everything works fine for while, till it loses root again.
Could someone shed some light on my issue, please?
Thanks in advance.
I've also themed Magisk Manager with Substratum could that be the issue?
I'm also running stock rom, losing magisk root from time to time.
When root is lost, I'm getting a notification that "new magisk V14 is available.
Reinstalling with TWRP only to lose it again a day or two later.
You all need to change your settings in magisk manager. I had the same problem. Change your update channel to Beta. This will keep magisk 14.3 installed once you flash it in recovery after setting this. :highfive:
Are you using the hide root feature?
If so then that is probably your issue.
opasha said:
You all need to change your settings in magisk manager. I had the same problem. Change your update channel to Beta. This will keep magisk 14.3 installed once you flash it in recovery after setting this. :highfive:
Click to expand...
Click to collapse
This worked for me, thank you!!
ALEXRUSS55 said:
This worked for me, thank you!!
Click to expand...
Click to collapse
Welcome :highfive:
jpasint said:
Are you using the hide root feature?
If so then that is probably your issue.
Click to expand...
Click to collapse
What issue does this cause?
I have the same issue with last magisk beta, 16.4.. have anyone found a fix?
stiffis said:
I have the same issue with last magisk beta, 16.4.. have anyone found a fix?
Click to expand...
Click to collapse
Flash magisk v16.4, then open magisk manager disable magisk hide, for keep your root
kenpaci said:
Flash magisk v16.4, then open magisk manager disable magisk hide, for keep your root
Click to expand...
Click to collapse
Looks like that worked, thanks!
stiffis said:
Looks like that worked, thanks!
Click to expand...
Click to collapse
But it losses Android pay. Anyone with other solution to keep root and hide it?
Best regards
Webgurru
webgurru said:
But it losses Android pay. Anyone with other solution to keep root and hide it?
Best regards
Webgurru
Click to expand...
Click to collapse
Try disabling MagiskHide and re-enable it again (try also with a reboot between disabling and enabling)
stiffis said:
Try disabling MagiskHide and re-enable it again (try also with a reboot between disabling and enabling)
Click to expand...
Click to collapse
If I disable it, won't secure apps that run in the background pick up root? I'm guessing I should freeze them first or something?
hshah said:
If I disable it, won't secure apps that run in the background pick up root? I'm guessing I should freeze them first or something?
Click to expand...
Click to collapse
Try closing those apps first, I think it goes ok as long you don't start the apps yourself because most off the apps checks root at startup, but I can't guarantee you anything
Something weird has happened... I've not actually changed anything but now I tend to lose root immediately after rebooting.
I'm a technical person so whilst I say nothing has changed, I know that it probably has and I just can't remember.
I need Hide, so disabling that is not an option... I have no idea where to even start debugging this
Sent from my Samsung Galaxy Note 8 using XDA Labs
hshah said:
Something weird has happened... I've not actually changed anything but now I tend to lose root immediately after rebooting.
I'm a technical person so whilst I say nothing has changed, I know that it probably has and I just can't remember.
I need Hide, so disabling that is not an option... I have no idea where to even start debugging this
Sent from my Samsung Galaxy Note 8 using XDA Labs
Click to expand...
Click to collapse
Hi,
Same thing happening to me. Lost root soon after restart. I need it hide. Any genius mind can suggest some solution?
Best regards,
Webgurru
webgurru said:
Hi,
Same thing happening to me. Lost root soon after restart. I need it hide. Any genius mind can suggest some solution?
Best regards,
Webgurru
Click to expand...
Click to collapse
I've been posting my analysis here:
https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
We have some smart guys (ie @topjohnwu @Didgeridoohan @kantjer etc) and I don't know enough to sort this so the least I can do is provide as much information as possible
hshah said:
I've been posting my analysis here:
https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
We have some smart guys (ie @topjohnwu @Didgeridoohan @kantjer etc) and I don't know enough to sort this so the least I can do is provide as much information as possible
Click to expand...
Click to collapse
Any luck or help from this thread to resolve?
webgurru said:
Any luck or help from this thread to resolve?
Click to expand...
Click to collapse
Only been spamming the thread with my woes since yesterday so still early days. I'm certainly not expecting an immediate fix because this has been going on for quite some time and if it was easy, we wouldn't be having this conversation.
hshah said:
Only been spamming the thread with my woes since yesterday so still early days. I'm certainly not expecting an immediate fix because this has been going on for quite some time and if it was easy, we wouldn't be having this conversation.
Click to expand...
Click to collapse
Thanks. In my point of view this look to be a bug in Magisk. Did you tried some older version?
Hey,
dumb question, does anybody have problems with loosing already bonded devices over night/hours?
I just reinstalled and rootet (AP with magisk [but no TWRP]) my device and slightly debloated it (by hand). So far so good.
But every couple hours it forgets the paired devices (Car Radio and Galaxy Gear).
Does anybody have an idea or at least a hint how i can monitor what is going to happen?
thx in advance
Matt
I'm a little bit further. Every time when i disable BT, the device emptys the config.
I found the bt_config.conf file. But the system does not seem to refer to it. Because when i back it up and restore it to the original path the BT does not connect.
So, does anyone knows where/who's the initial Config file.
thx in advance
Install the libsecure_storage magisk module from ianmacd. That should fix it.
AMEN!!!! Thx, thats it.
Can you describe what it does?
Donkeykong307 said:
Install the libsecure_storage magisk module from ianmacd. That should fix it.
Click to expand...
Click to collapse
zero5liters said:
Hey,
dumb question, does anybody have problems with loosing already bonded devices over night/hours?
I just reinstalled and rootet (AP with magisk [but no TWRP]) my device and slightly debloated it (by hand). So far so good.
But every couple hours it forgets the paired devices (Car Radio and Galaxy Gear).
Does anybody have an idea or at least a hint how i can monitor what is going to happen?
thx in advance
Matt
Click to expand...
Click to collapse
I have the exact same problem. My S10+ keeps forgetting already connected BT Devices since I rooted it. I'm gonna try that libsecure_storage Magisk module.
I am suffering from this on my plus, does anyone know which section the "Install the libsecure_storage magisk module" is located on forum?
Best wishes
Wingchundub said:
I am suffering from this on my plus, does anyone know which section the "Install the libsecure_storage magisk module" is located on forum?
Best wishes
Click to expand...
Click to collapse
If you havent found the forum you could try this alternative:
https://forum.xda-developers.com/ga.../zip-libbluetooth-patcher-fix-losing-t4017735
Thank you, But unfortunately it not work
It came up with :- Updater process ended with ERROR 1
Has anyone had this issue and knows how to resolve it? It's due to root but I've done everything in Magisk to hide magisk, build prop, renamed magisk, everything I could think of and everything I've read that said "do this, this will fix it". Well it didn't. And I don't know what else to try. Any info would be greatly appreciated.
I had same problem I hide magisk then renamed magisk then restart device cod now works
mattwheat said:
Has anyone had this issue and knows how to resolve it? It's due to root but I've done everything in Magisk to hide magisk, build prop, renamed magisk, everything I could think of and everything I've read that said "do this, this will fix it". Well it didn't. And I don't know what else to try. Any info would be greatly appreciated.
Click to expand...
Click to collapse
You need to turn off developer options
COD won't run with it.
eloko said:
You need to turn off developer options
COD won't run with it.
Click to expand...
Click to collapse
Thanks I'll try that.
Hello, I have the following problem, the operating system and the Greenify application worked very well on Magisk v22.1, but after updating to v23.0, there are problems, the operating system itself on the phone is slow and in the Greenify application, I am dissatisfied with this update v23.0 .
Please help what can be done about it.
My HTC U11, Stock ROM.
Greetings.
Noticed this on my Pixel 3 running stock as well. I would have to restart the phone several times to get it running.
GrandAdmiral said:
Noticed this on my Pixel 3 running stock as well. I would have to restart the phone several times to get it running.
Click to expand...
Click to collapse
I understand it turns out there is a problem with this v23.0 update, I wonder who else has a problem with it, besides us.
I'm not seeing any similar issues on v23 (and haven't on the canary releases leading up to it either). That doesn't mean there isn't a possible issue though...
Have you guys checked your modules if there's a possible culprit there?
Didgeridoohan said:
I'm not seeing any similar issues on v23 (and haven't on the canary releases leading up to it either). That doesn't mean there isn't a possible issue though...
Have you guys checked your modules if there's a possible culprit there?
Click to expand...
Click to collapse
I only have these modules and they were on v22.1, they did not cause any problems like this v23.0.
That the modules worked fine in earlier releases doesn't necessarily mean that they work on current/future release...
You need to do some troubleshooting if you're interested in getting to the bottom of this.
Disable modules to figure out if it's one of those. Disable MagiskHide to see if it's connected to that. Etc...
Didgeridoohan said:
That the modules worked fine in earlier releases doesn't necessarily mean that they work on current/future release...
You need to do some troubleshooting if you're interested in getting to the bottom of this.
Disable modules to figure out if it's one of those. Disable MagiskHide to see if it's connected to that. Etc...
Click to expand...
Click to collapse
It may be that the module may not work properly on this v23.0.
Okay, I will follow your suggestion on what to do with it, I'll check it out and let you know.
From the very beginning, MagiskHide is turned off.
MagiskHide off, module turned off, Riru, Riru - Edxposed, phone restart, phone working, fast as it was on v.22.1, probably something is wrong with these modules.
Sounds like EdXposed is causing some issues then... You might want to check the Xposed forums and/or EdXposed Github issues to see if there's some mention of similar problems there.
Didgeridoohan said:
Sounds like EdXposed is causing some issues then... You might want to check the Xposed forums and/or EdXposed Github issues to see if there's some mention of similar problems there.
Click to expand...
Click to collapse
I will check the forums, maybe I will come across something, and if not, I will also write a post there, maybe a new update of these modules will fix something.
Thanks for your interest in the topic.