nokia 8 dead I cant restart or shutdown device - Nokia 8 Questions & Answers

Hi i have a problem i use root uinstaller app for android i try to uninstall youtube and change to youtube vanced but when i restart phone my phone stay on your device software cant'be checked and i cant power off and go to download mode i try use volume up and plug usb to power off in adb i have message no device found in device menager i have mtp device when connect phone to pc please help how to turn off these phone or restart

My phone working i must wait for battery discharge and few trys boot to download mode now working fine

good yo know its working fine now

Related

[Q] i9000 not booting any more

Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck

[Q] i957r cant power on

after install may be wrong file and restart cant power on again
now when i connect it in my pc usb device connected" and "usb device disconnected and hear the voice and see that in device manager
now i put it as nvidia usb boot recovery but still on & off on usb and nothing on the screen and cant go to recovery mode
please help me

Can't Connect to PC and Stuck in Bootloop

I Updated my Lenovo A7000+ then the Update Failed, and now it's Stuck in Bootloop and I Search the internet to Fix it but I need to connect to PC, I Connect it to PC and Didn't Recognize then I Install Lenovo USB Drivers and Still Not Recognize, and now how do i connect this phone to pc.
1. Remove the battery
2. Get into twrp mode by pressing volume and power buttons at a time
3. Now connect to pc with usb cable
4. Your phone will get detected perfectly
5. Do what ever you want

I can not connect flashmode

hello I can not connect flashmod sony x performance dual sim.All driver instaled flashtool.driver usb sony.maybe you have the original rom format zip which can be install we TWRP .
Thanks for the help I shall be indebted
translated with google translator
You can see what happen when you connect the phone by Windows Device Manager.
You can see what driver get error. Then fix it
If the phone is turned off nothing happens,and fastboot mode S1 boot mode connect.and from a today when I want to turn on, up only a black screen

[Q] XPERIA SP CAN'T DETECT ANY USB (PC or WALL CHARGER)

Good evening everyone!
I need help so bad, so urgent!
It was happen when i try to install TWRP on my SONY Xperia SP using an amazing stupid way, using flash boot command coz i cant install twrp using flash recovery command, but i dont know why that fastboot take so long time and just display <waiting for device>. So i decided to remove my USB and plug it once again. Suddenly, my laptop show a notif. "USB not recognized" and the blue LED is gone, then SONY logo appear and start to charging and u can hear connect-"Not recognized"-and disconnect sounds from laptop. But, when the display turn off, it's turn on again, and 5 seconds later u can hear disconnected sounds, then charging stopped. Few later, the logo come again and charging again, and the same thing happend. When i try to charge from the wall charger, it can charging normally, but I CAN'T TURN THE PHONE ON. It's like the power button has been disabled. So i unplug the charger and turn my XSP on, it can boot normally. But when i try to connect to charger, it wont charging. So on my laptop, even my laptop didnt notice any USB, and my XSP didn't show any LED.
Help me to fix this. I can't charge my phone except to turn it off T_T. Pls give me a way out T_T.
Status: Installed AOSP Oreo 8.0.0 huashan, not rooted and no cwm/twrp (this is what i need to install, so i can root my phone, the latest cwm i installed gone after flashing AOSP ROM), cant connect to any USB even in fastboot mode (i've installed the driver).
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
AsadXperia said:
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
Click to expand...
Click to collapse
what's emma? how to use that?
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
https://talk.sonymobile.com/t5/Andr...ony-Flash-tool-for-Xperia-devices/td-p/307318
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
AsadXperia said:
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
Click to expand...
Click to collapse
that was my problem. when i plug my phone in fastboot or bootloader, pc wont detect it, it says "USB not recognized". also when my phone is standby, it wont detect any usb i plugged in, wall charger or usb pc.
i've installed latest driver for XSP, and USB debugging's on.
have you read my first comment? , clear your phone's usb slot and then try replugging , if it fails try it on a different computer , the problems usually with windows 10 as it loses recognizing devices after some fail attempts.

Categories

Resources