I need a little help. I'm making the jump from unlocked iphones to the Nexus One and have a newly acquired nexus one that has already been rooted and set with the 2.2 Froyo rom, and what I am told is the most popular Cyanogen HTC rom. The 2.2 Froyo rom seems to work perfectly, but my preference is the HTC ROM listed under my back up as BOS-20100531-0408. When I am running this ROM, I am unable to connect to 3G, or edge for that matter. (wifi connects fine) I have attempted the simple steps of dialing *#*#4636#*#* and changing the setting from WCDMA preferred to WCDMA Only, but this has had no effect. I lose signal for a second, then my bars come back, but no 3G and no edge. I am certain this is a T-Mobile model Nexus and I have the appropriate internet package as well. If anyone can help, I would appreciate it. Thank you.
update: The 3G works fine under Froyo, just not the HTC incase that wasn't clear. Thank you.
You need to enter your APN settings on the HTC ROM.
Okay, I have gone into settings, wireless & networks, mobile networks, Access Point Names, and the screen is an empty black. How do I add an APN? Is this the appropriate location? Thank you for your help.
3G issues
Okay, so I went into the APN blank screen, selected the menu on the phone and added the APN info I found on a website after a quick google search. I was going to post the link here, but I am apparently restricted from doing so because I am new. Now I have an H with arrows under it next to my service bars. Is this the same as 3G? I am unfamiliar with the H with arrows under it, but it seems pretty quick. I believe there is another page on xda that states it is as good, or better than 3G, is this correct? Thanks again.
I bought nexus one from my friend.
I am currently using HD2 with 3g data.
When I plugged in my sim card to the n1, it only worked with edge.
So, I seared internet for some information and I found out something about "*#*#6436#*#*" and change the setting to WCDMA only. Then the phone got no signal at all, so I changed back to WCDMA preferred. Then I did ping test but it did not seem to work very well.
Then I played with some APN setting and I realized that I lost data connection completely (phone still working)
I have tried to reset the phone but no luck.
Can anyone please help me with the problem? I am using T-mobile.
Thank you.
Pull your battery, and look at the back of your phone. At the top of the dark area there are numbers, look at the PB or FCC ID numbers. If they end in 9110 then you have an AT&T version of the phone, and the hardware will not work with T-Mobile's 3G service...
khunny7 said:
I bought nexus one from my friend.
I am currently using HD2 with 3g data.
When I plugged in my sim card to the n1, it only worked with edge.
So, I seared internet for some information and I found out something about "*#*#6436#*#*" and change the setting to WCDMA only. Then the phone got no signal at all, so I changed back to WCDMA preferred. Then I did ping test but it did not seem to work very well.
Then I played with some APN setting and I realized that I lost data connection completely (phone still working)
I have tried to reset the phone but no luck.
Can anyone please help me with the problem? I am using T-mobile.
Thank you.
Click to expand...
Click to collapse
are you in the USA? you need to list your location. it is likely that you purchased the wrong version of the nexus one. there is an ATT version and a tmobile version. each only works with the proper 3G. so an ATT n1 on tmobile only gets edge, and vice versa. check which version you own.
Hello Everyone,
I've been tempted to purchase a Droid 4 but I'm currently on the Page plus Network. I've seen many tutorials for flashing 4G LTE phones on to page plus but I didn't really see a tutorial for the Droid 4. I was wondering since the D4 is similar to the RAZR/BIONIC, if I can just follow those tutorials. I really want to use the D4 and would appreciate it if someone were to help guide me through the flashing process.
Thanks A lot,
jeanr464.
jeanr464 said:
Hello Everyone,
I've been tempted to purchase a Droid 4 but I'm currently on the Page plus Network. I've seen many tutorials for flashing 4G LTE phones on to page plus but I didn't really see a tutorial for the Droid 4. I was wondering since the D4 is similar to the RAZR/BIONIC, if I can just follow those tutorials. I really want to use the D4 and would appreciate it if someone were to help guide me through the flashing process.
Thanks A lot,
jeanr464.
Click to expand...
Click to collapse
Razr xt912 has even same hardware, it shouldn't be a problem to use tutorial for razr and doing same thing on d4
Sent from my XT894 using xda premium
Droid 4 on ICS different Method. Data Challenge.
olegfusion said:
Razr xt912 has even same hardware, it shouldn't be a problem to use tutorial for razr and doing same thing on d4
Sent from my XT894 using xda premium
Click to expand...
Click to collapse
So I received my droid 4 and unfortunatly it was shipped with ICS. So following a lot of the common RAZR/BIONIC tutorials didn't really work out well for me. I saw a lot of people also having trouble trying to get the Droid 4 to work properly on PP with ICS. So I just wanted to say I followed the following steps on this following tutorial and it worked our flawlessly and I was able to get my phone working on talk/text 1X data.
howardforums. com/showthread. php/ 1774610-Droid-BIONIC-ICS-manual-activation-talk-text-mms-3g-all-working
Now my only challenge is getting 3G Data. For every razr/bionic tutorial I saw they went to the Phone info (*#*#4636#*#*) to try to set the radio test settings to get 3G/EVDO. For some reason on my Droid 4 when I enter this it simply disappears on the dialer and nothing happens. Does anyone know how to get 3G working on the Droid 4. So far all I did was disable all the LTE APNs, Enviroment, lte bbpanic disable, and change the sim type to 3g test uicc.
Can anyone help me out with this?
Solution to 3G on D4 ICS running on Pageplus.
jeanr464 said:
So I received my droid 4 and unfortunatly it was shipped with ICS. So following a lot of the common RAZR/BIONIC tutorials didn't really work out well for me. I saw a lot of people also having trouble trying to get the Droid 4 to work properly on PP with ICS. So I just wanted to say I followed the following steps on this following tutorial and it worked our flawlessly and I was able to get my phone working on talk/text 1X data.
howardforums. com/showthread. php/ 1774610-Droid-BIONIC-ICS-manual-activation-talk-text-mms-3g-all-working
Now my only challenge is getting 3G Data. For every razr/bionic tutorial I saw they went to the Phone info (*#*#4636#*#*) to try to set the radio test settings to get 3G/EVDO. For some reason on my Droid 4 when I enter this it simply disappears on the dialer and nothing happens. Does anyone know how to get 3G working on the Droid 4. So far all I did was disable all the LTE APNs, Enviroment, lte bbpanic disable, and change the sim type to 3g test uicc.
Can anyone help me out with this?
Click to expand...
Click to collapse
OKAY! After hours of playing with my Droid 4 on ICS on the Page Plus Network, I finally got 3G to work!!!!
First off, I realized the *#*#4636#*#* aka the INFO code wasn't working on the Droid 4 model because it doesn't exist in the firmware. Instead going through the program menu (##PROGRAM) I was able to access the test mode there and change options.
From my D4 ICS experience, to get 3G instead of 1X I had to
1. Access the Program Menu from the dialer ##PROGRAM aka ##7764726
2. Enter the SPC (000000)
3.Scroll Down to LTE TEST SETTINGS
4. Click SIM TYPE and then Choose 3G Test UICC then click Apply
5. Scroll down to LTE bppanic and select disable then click Apply
6.Then Scroll down and Click (Disable Class 1 APN, Disable Class 2 APN, Disable Class 3 APN)
7. Then choose LTE Movement detection and select Disable.
8. Click back twice the phone will restart.
At This point according to tutorials you should have 3G but if you're like me and unlucky didn't have 3G then do this.
1. Go to the dialer
2. Enter ##PROGRAM aka ##7764726
3. Then enter SPC (000000)
4. Then click Test Mode
5. Click Next and then click next again then you should be on the field test Screen
6. HDR hybrid mode should be (ON)
7.EVDO revision should be (A)
8. CDMA RX Diversity should be (OFF)
9. HDR RX Diversity should be (OFF)
10. Finally look up to where it says Network Mode
11. Change it to EVDO only and Check the top where your signal bars on. Give it a minute, it should pop and say 3G. If it says 3G and you can proceed to the final step and change the network selection to CDMA and EVDO and then back out of the menu.
12. There you go! You should have 3G on the Droid 4 now in ICS running on Pageplus.
In Gingerbread it was a whole lot more simpler. I hope this solution will help people running ICS.
Forgot to mention.
jeanr464 said:
OKAY! After hours of playing with my Droid 4 on ICS on the Page Plus Network, I finally got 3G to work!!!!
First off, I realized the *#*#4636#*#* aka the INFO code wasn't working on the Droid 4 model because it doesn't exist in the firmware. Instead going through the program menu (##PROGRAM) I was able to access the test mode there and change options.
From my D4 ICS experience, to get 3G instead of 1X I had to
1. Access the Program Menu from the dialer ##PROGRAM aka ##7764726
2. Enter the SPC (000000)
3.Scroll Down to LTE TEST SETTINGS
4. Click SIM TYPE and then Choose 3G Test UICC then click Apply
5. Scroll down to LTE bppanic and select disable then click Apply
6.Then Scroll down and Click (Disable Class 1 APN, Disable Class 2 APN, Disable Class 3 APN)
7. Then choose LTE Movement detection and select Disable.
8. Click back twice the phone will restart.
At This point according to tutorials you should have 3G but if you're like me and unlucky didn't have 3G then do this.
1. Go to the dialer
2. Enter ##PROGRAM aka ##7764726
3. Then enter SPC (000000)
4. Then click Test Mode
5. Click Next and then click next again then you should be on the field test Screen
6. HDR hybrid mode should be (ON)
7.EVDO revision should be (A)
8. CDMA RX Diversity should be (OFF)
9. HDR RX Diversity should be (OFF)
10. Finally look up to where it says Network Mode
11. Change it to EVDO only and Check the top where your signal bars on. Give it a minute, it should pop and say 3G. If it says 3G and you can proceed to the final step and change the network selection to CDMA and EVDO and then back out of the menu.
12. There you go! You should have 3G on the Droid 4 now in ICS running on Pageplus.
In Gingerbread it was a whole lot more simpler. I hope this solution will help people running ICS.
Click to expand...
Click to collapse
By the way. My 4G lte sim card was in my phone the whole time. I don't know if it makes a difference but from the moment I got the the D4 and started flashing I left my D4 LTE sim inside my phone.
jeanr464 said:
OKAY! After hours of playing with my Droid 4 on ICS on the Page Plus Network, I finally got 3G to work!!!!
Click to expand...
Click to collapse
Hi Jeanr464. Does the 3G survive a reboot? The link to the howard forums tutorial in post #3 seems to indicate you need to;
snoop1979 said:
If your phone gets restarted or turned off. you phone will say needs to be activated again, however you will have talk and text enabled. to regain mms and 3g repeat steps 16-24.
Click to expand...
Click to collapse
devinpatterson said:
Hi Jeanr464. Does the 3G survive a reboot? The link to the howard forums tutorial in post #3 seems to indicate you need to;
Click to expand...
Click to collapse
Hey devinpatterson!
I can't tell you how many times I rebooted my phone or my phone died and has to turn on. The 3G does stick after reboot and the activatiion doesn't come back. I guess once the phone is succesfully activated the screen doesn't come back. Once you configure your phone settings to get 3G just leave those settings alone. I can confirm on. The droid 4 that it sticks after reboot.
Although, I can tell you if you remove the sim then the phone acts crazy with activation and all that jazz. While I was experimenting for hours getting 3G on the phone I saw some places that you have to remove the sim. So I did. And then activation and emergency calls and everything popped back on,until I put the sim back and reboot the phone.
According to all the tutorials I saw and my experience as long as you use a blank lte sim and successfully activate the phone (manually/*228 etc) the phone sim is programmed to work with your phone and removing or putting another sim with cause activation and data settings to trigger again.
Hope this explaination helps! Best of luck,
jeanr464
jeanr464 said:
According to all the tutorials I saw and my experience as long as you use a blank lte sim and successfully activate the phone (manually/*228 etc) the phone sim is programmed to work with your phone and removing or putting another sim with cause activation and data settings to trigger again.
Click to expand...
Click to collapse
Hi jeanr464. Thank you for all of this brilliant info about the Droid 4 with ICS. I'm a newbie also wanting to set up my new Droid 4 with PagePlus and wondering, does Snoop's step of dialing *22800 for activation work on this phone? If not, is manual activation something different, and if so, how do you manually activate? And in general, do all of Snoop's steps work except for dialing *#*#4636#*#* work for this phone?
Thanks in advance,
tubaman101
Manual vs *228
tubaman101 said:
Hi jeanr464. Thank you for all of this brilliant info about the Droid 4 with ICS. I'm a newbie also wanting to set up my new Droid 4 with PagePlus and wondering, does Snoop's step of dialing *22800 for activation work on this phone? If not, is manual activation something different, and if so, how do you manually activate? And in general, do all of Snoop's steps work except for dialing *#*#4636#*#* work for this phone?
Thanks in advance,
tubaman101
Click to expand...
Click to collapse
Hey tubaman101,
To answer your question, manual activation is basically manually programming the phone and doing all the steps that *228 would have done. From my droid 4 experience getting on to pageplus, *228 didn't work right off the bat because of sim restrictions or some type of error. What you have to do is manually program the phone first with the correct settings to make basic features works then you'll be able to dial *228 where it will correct everything and fix everything to work like data and roaming etc. According to Snoops tutorial, basically what the manual programming is is the step where he enters ##7764726 aka ##PROGRAM and fixes the min and the mdn and settings the cdma only option. From there you have manually programed the phone. Then after setting those options when you try *228 it should work and then *228 will correct and program automatically all the phone options which then you should have perfect talk text and 1x. To get 3G just follow my steps above on how I did it.
To make it all simple(I'm going to summarize snoop' method) once you get the D4 and a blank sim, insert sim, enter bptools (tutorial shows how), set the phone to nvonly and evdo rev a with cdma workshop, dfs tool or qpst (tutorial shows how to) then from there enter ##PROGRAM in the dialer manually program your phone min and mdn (if you don't know what it is you can request PP customer service or PM me to help you get it, and set your phone to cdma only mode (tutorial explains how) and afterwards *228 and your set.
After to get 3G follow my steps.
It was very troublesome for me at first because I had no clue how to do this but I've done 4 droid 4s and a razr with this method so far so I've became slight savvy with it. If you have ANY trouble just list it here or PM me and I'll be more than happy to help out.
Good luck,
jeanr464
jeanr464 said:
once you get the D4 and a blank sim, insert sim, enter bptools (tutorial shows how), set the phone to nvonly and evdo rev a with cdma workshop, dfs tool or qpst
Click to expand...
Click to collapse
Hi jeanr464. I sent you a PM about if it is necessary to load a PagePlus prl file during the process, but I have a couple more questions.
I started with the steps you outlined using DFS. I don't think the nvonly and evdo rev a settings stuck because I got some sort of error message in the DFS Tools log, and I was not able to complete the next step of dialing ##program.
I'm wondering if it is because my sim isn't blank. I bought my Droid 4 on eBay new. (It was actually a warranty replacement phone that had never been opened or used.) It came with a new Verizon 4G sim card on top of the box. I wonder if this card was "assigned" to the previous owner, and so perhaps isn't blank.
Do you think I need to buy a new "blank" sim card? …and if so, do you have any recommendations as to where to get one?
Also, I was wondering if the port I chose in the CDMA tools was the right one. I chose "COM 6" in the attached picture. Was that correct?
(In case it matters, I'm doing this in Windows 7 on a partition created on my Mac computer.)
Thanks again!
tubaman101
The Hopeful solution.
tubaman101 said:
Hi jeanr464. I sent you a PM about if it is necessary to load a PagePlus prl file during the process, but I have a couple more questions.
I started with the steps you outlined using DFS. I don't think the nvonly and evdo rev a settings stuck because I got some sort of error message in the DFS Tools log, and I was not able to complete the next step of dialing ##program.
I'm wondering if it is because my sim isn't blank. I bought my Droid 4 on eBay new. (It was actually a warranty replacement phone that had never been opened or used.) It came with a new Verizon 4G sim card on top of the box. I wonder if this card was "assigned" to the previous owner, and so perhaps isn't blank.
Do you think I need to buy a new "blank" sim card? …and if so, do you have any recommendations as to where to get one?
Also, I was wondering if the port I chose in the CDMA tools was the right one. I chose "COM 6" in the attached picture. Was that correct?
(In case it matters, I'm doing this in Windows 7 on a partition created on my Mac computer.)
Thanks again!
tubaman101
Click to expand...
Click to collapse
Okay, I don't think the sim card would be that much of a problem, but if the problem persists after trying the next steps then you can get a new one off ebay for 5 dollars like I did. In any case, you did choose the correct port in DFS tools. You brought up a very good point that I forgot to mention. You do need to load a pageplus prl. The one I used during the process was the 51720 EVDO prl. Once you find that one "google will be a great help", open up DFS tools and then make sure after you load up the program and select the port you enter the SPC 000000, its on the top right corner of DFS I believe ( I used Cdma ws). After that overwrite the PRL using the program and then make sure you set nvonly on nam 1 and nam 2 and set evda a. If you keep on getting errors with DFS tool let me know. In this case we might have to figure something else. In any case if you are successful, then once you trestart the phone you should if you hadn't already, bypass the activation or welcome screen, if you don't know how to do that let me know but if you are already on the regular screen with the apps and everything then proceed to the dialer and press ##program and follow the rest of snoops guide and you should be fine.
Honestly, the hardest part of this whole process is the programming on PC. After that you should be fine. As far as windows 7 is concerned, I used windows 7 and I was fine.
Enter the Phone in BPtools
Connect to PC
Go to system settings and make sure you got the diag port com #
Open DFS
Select the com # and read
Send SPC 000000
Load PRL 51720EVDO
Write it to the phone
Change nam 1 and nam 2 to NVONLY instead of RUIM
change data to EVDO REV A.
make sure all settings are written and restart phone
If you are at the welcome screen bypass it (four corners unlock) if the phone is at the regular menu with the apps then go straight to dailer and ##PROGRAM
Change MDN and MIN
enter test mode and click next until you see the options to change the phone network to CDMA only
click back twice and the phone should restart
at this point you should have somewhat some type of service but then press *228
It might reject it the first time but try again and the activation screen will come up and the music will play and activate your phone
After that look above to figure out 3G
If you still have trouble PM me and we'll see what we can do.
Forgot mention
jeanr464 said:
Okay, I don't think the sim card would be that much of a problem, but if the problem persists after trying the next steps then you can get a new one off ebay for 5 dollars like I did. In any case, you did choose the correct port in DFS tools. You brought up a very good point that I forgot to mention. You do need to load a pageplus prl. The one I used during the process was the 51720 EVDO prl. Once you find that one "google will be a great help", open up DFS tools and then make sure after you load up the program and select the port you enter the SPC 000000, its on the top right corner of DFS I believe ( I used Cdma ws). After that overwrite the PRL using the program and then make sure you set nvonly on nam 1 and nam 2 and set evda a. If you keep on getting errors with DFS tool let me know. In this case we might have to figure something else. In any case if you are successful, then once you trestart the phone you should if you hadn't already, bypass the activation or welcome screen, if you don't know how to do that let me know but if you are already on the regular screen with the apps and everything then proceed to the dialer and press ##program and follow the rest of snoops guide and you should be fine.
Honestly, the hardest part of this whole process is the programming on PC. After that you should be fine. As far as windows 7 is concerned, I used windows 7 and I was fine.
Enter the Phone in BPtools
Connect to PC
Go to system settings and make sure you got the diag port com #
Open DFS
Select the com # and read
Send SPC 000000
Load PRL 51720EVDO
Write it to the phone
Change nam 1 and nam 2 to NVONLY instead of RUIM
change data to EVDO REV A.
make sure all settings are written and restart phone
If you are at the welcome screen bypass it (four corners unlock) if the phone is at the regular menu with the apps then go straight to dailer and ##PROGRAM
Change MDN and MIN
enter test mode and click next until you see the options to change the phone network to CDMA only
click back twice and the phone should restart
at this point you should have somewhat some type of service but then press *228
It might reject it the first time but try again and the activation screen will come up and the music will play and activate your phone
After that look above to figure out 3G
If you still have trouble PM me and we'll see what we can do.
Click to expand...
Click to collapse
Forgot to mention one thing, after you program the phone on DFS tool you should switch the esn from PP from your other phone. Your MEID is the IMEI without the last digit so you should have 14 characters in total. Once you switch the esn or set a new activation from PP then proceed to the step with the ##program etc.
Droid 4
jeanr464 said:
Hey tubaman101,
To answer your question, manual activation is basically manually programming the phone and doing all the steps that *228 would have done. From my droid 4 experience getting on to pageplus, *228 didn't work right off the bat because of sim restrictions or some type of error. What you have to do is manually program the phone first with the correct settings to make basic features works then you'll be able to dial *228 where it will correct everything and fix everything to work like data and roaming etc. According to Snoops tutorial, basically what the manual programming is is the step where he enters ##7764726 aka ##PROGRAM and fixes the min and the mdn and settings the cdma only option. From there you have manually programed the phone. Then after setting those options when you try *228 it should work and then *228 will correct and program automatically all the phone options which then you should have perfect talk text and 1x. To get 3G just follow my steps above on how I did it.
To make it all simple(I'm going to summarize snoop' method) once you get the D4 and a blank sim, insert sim, enter bptools (tutorial shows how), set the phone to nvonly and evdo rev a with cdma workshop, dfs tool or qpst (tutorial shows how to) then from there enter ##PROGRAM in the dialer manually program your phone min and mdn (if you don't know what it is you can request PP customer service or PM me to help you get it, and set your phone to cdma only mode (tutorial explains how) and afterwards *228 and your set.
After to get 3G follow my steps.
It was very troublesome for me at first because I had no clue how to do this but I've done 4 droid 4s and a razr with this method so far so I've became slight savvy with it. If you have ANY trouble just list it here or PM me and I'll be more than happy to help out.
Good luck,
jeanr464
Click to expand...
Click to collapse
Jean I think I followed all the instructions on here but it still says fail to connect NAM after I put in the MIN and MDN so I can never I finish programing my droid 4 to Page plus. Can you please help me.
Warning Droid 4 JellyBean Upgrade + Pageplus Users
Just a fair warning to everyone using Pageplus. As you all the Jellybean update has been released and your phone might've already offered to upgrade your OS.
DO NOT UPDATE!!!!! I REPEAT DO NOT UPDATE!!!!
Although JellyBean is very beautiful, this update will break your Page plus configuration. I had two friends already who were on Droid Razr/Maxx and updated to JellyBean. The whole CDMA WS config has been reset so options like NV_ONLY and evdo config has been erased leaving the phone in a non working state- In terms of calling, texting or data.
I'm very tempted to get JellyBean and everyone is looking for a safe solution to upgrade to JellyBean and have PP. As far as I've seen online, there have been successful tutorials but it required re-flashing the system to a factory state and re-configuring and other had it where you need a new sim and was necessary to root the phone. I'll be experimenting and posting my results soon. If anyone comes up with a success, please share!!!:laugh:
Good Luck and be pre-cautious!,
jeanr464
Working Perfect
I have my Droid 4 JB flashed working with full 3G on Pageplus never activated SIM and no problems. Same way as with the RAZR/RAZR MAXX. You can use any sim and not have any problems.
What was your situation?
How did you do it? I performed a straight upgrade and my config screwed up. Did you just reflash it and reconfigured it? Can I apply the same CDMA workshop method to this firmware?
lionsro said:
I have my Droid 4 JB flashed working with full 3G on Pageplus never activated SIM and no problems. Same way as with the RAZR/RAZR MAXX. You can use any sim and not have any problems.
Click to expand...
Click to collapse
Getting 3G to stick
Hey. Thanks for the tutorial on how to get 3G working. I haven't gotten it to work for some reason. I'm running ICS and I have 1X working. My girlfriend has the same phone and I did the same thing, but for whatever reason, not even 1X will work on hers. I did your settings in the ##program menu. The LTE and test settings. I'm not having luck getting 3G to stick.
It also seems that I cannot always get data to work by toggling wifi off. I have to not be around it or turn off my router. Getting 1X to work seems to sometimes be random. If I get 1x working and then If I go into the ##program menu now and turn EDVO only, 3G will come up for about 5 seconds and then disappear. After many restarts and trying things, 1X is all I can get. I wonder if it has something to do with where I am? Great Falls, Montana.
Any ideas would be appreciated.
Try this.
drossvirex said:
Hey. Thanks for the tutorial on how to get 3G working. I haven't gotten it to work for some reason. I'm running ICS and I have 1X working. My girlfriend has the same phone and I did the same thing, but for whatever reason, not even 1X will work on hers. I did your settings in the ##program menu. The LTE and test settings. I'm not having luck getting 3G to stick.
It also seems that I cannot always get data to work by toggling wifi off. I have to not be around it or turn off my router. Getting 1X to work seems to sometimes be random. If I get 1x working and then If I go into the ##program menu now and turn EDVO only, 3G will come up for about 5 seconds and then disappear. After many restarts and trying things, 1X is all I can get. I wonder if it has something to do with where I am? Great Falls, Montana.
Any ideas would be appreciated.
Click to expand...
Click to collapse
Okay, I'm actually stumped about your situation.. Seems very awkward. In any case let's see what we can do. "Hopefully your on ICS and not JellyBean"
I'm going to post my phone settings and try to match her settings to mine. You said you already did the LTE bbpanic off , apns disable, and test settings...
Okay Go to test settings in the program menu, click next until you see the Field test screen and make sure your phone matches these settings:
Service Option - EVRC
HDR Hybrid Mode - ON
EVDO Revision- A
Network Mode- CDMA and EVDO
CDMA RX Diversity- OFF
HDR RX Diversity- OFF
then hit the back button on your phone twice so it can restart.
If 3G still doesn't work then we need to CDMA WS your phone. It would seem the there is something wrong with the EVDO settings. To me it sounds like the EVDO protocol might be wrong.
jeanr464 said:
Okay, I'm actually stumped about your situation.. Seems very awkward. In any case let's see what we can do. "Hopefully your on ICS and not JellyBean"
I'm going to post my phone settings and try to match her settings to mine. You said you already did the LTE bbpanic off , apns disable, and test settings...
Okay Go to test settings in the program menu, click next until you see the Field test screen and make sure your phone matches these settings:
Service Option - EVRC
HDR Hybrid Mode - ON
EVDO Revision- A
Network Mode- CDMA and EVDO
CDMA RX Diversity- OFF
HDR RX Diversity- OFF
then hit the back button on your phone twice so it can restart.
If 3G still doesn't work then we need to CDMA WS your phone. It would seem the there is something wrong with the EVDO settings. To me it sounds like the EVDO protocol might be wrong.
Click to expand...
Click to collapse
I can confirm I am not on Jellybean. I didn't update it yet because I thought it might break it. Also all of those settings match on both of our phones.
Lets Go Through Your Settings
drossvirex said:
I can confirm I am not on Jellybean. I didn't update it yet because I thought it might break it. Also all of those settings match on both of our phones.
Click to expand...
Click to collapse
Okay. So... I think it might have to be with the configuration of the phone. I believe it could be:
1. The PRL
or
2. EVDO settings
So we're going to have to CDMA WS or DFS your phone and check the settings. (Recommend DFS since everything is available.)
www.cdma-ware.com or http://www.cdmatool.com/
Put your phone in Bptools mode - (Turn off, press volume +/- buttons and press power, scroll to bptools, press volume up)
Connect it to the computer
Go to device manager and find out what COM port it's on.
Open DFS and select the ports on the top left, double click on the port of your phone (A green circle should appear next to it after your click) then exit out of the port selection screen.
Then on the top left of the screen under Ports you should see SPC. Click on it to unlock the SPC of your phone.
Now click on the Programming tab. Once you click the Programming Tab, Click on the NAM tab under ( It's between general and Data).
Now there should be a section to the right that says PRL. on the bottom click READ and then tell me what PRL number shows up. (The number is located in the box on top of the Read button).
Afterwards, click on the Data tab ( It's next to the NAM tab you clicked earlier)
On the bottom there should be a READ button. Click that button.
Now Tell me in your next post if the PPP config to the left has your phone number @dun.vzw3g.com and post all your the MODE settings
Ex:
SIP NAI= (Your Phone) @dun.vzw3g.com
UID=(Your Phone)@vzw3g.com
MODE:
HDR SCP force AT config: =
HDR SCP force release 0 config=
Hybrid preferred mode:
Data MDR (HSPD) mode:
Data service option:
I'll Post screenshots of my phone config so you can compare. Before you change anything POST what your phone settings display.
Hope we can solve this,
jeanr464
The short:
I changed the "Select radio band" setting in the test menu (*#*#info#*#*) and it screwed things up.
I wiped and reflashed CM12.1 - but it didn't reset that setting (it's still borked).
Does anyone know where it stores that setting, or how to reset it somehow?
The long:
Initially in CM12.1 I was having problems staying on LTE - it always fell back to 3G and stayed there.
So tried this band change that someone who had the same problem suggested.
Now, every option I try is great for LTE but says "cellular network not available" and I can't make calls.
The exception is "Cellular" which I can make calls but only get 1X data.
These are the options in the menu:
"JAPAN Band (WCDMA-800/WCDMA-IMT-2000)"
"USA Band (GSM-850/PCS-1900/wCDMA-850/WCDMA-PCS-1900)"
"Cellular (800-MHz)"
"PCS (1900-MHz)"
I don't know what it was before and I can't see figure out how to tell what it currently is set to.
I just want to flash back to stock so things work again, but if this setting doesn't get reset then I don't know if that will work anyway.
Any chance settings like that are stored on the SIM card?
try to re-flash radio only
masterchapter said:
try to re-flash radio only
Click to expand...
Click to collapse
Worth a shot, but doesn't seem to have helped.
Try the instructions here: http://forum.xda-developers.com/showthread.php?p=57778872
I seemed to have luck when I made the changes according to this post and then immediately ran the ping test. I don't know if the ping test really did anything to help but I've had cell service since following these steps.
mh0520 said:
Try the instructions here: http://forum.xda-developers.com/showthread.php?p=57778872
I seemed to have luck when I made the changes according to this post and then immediately ran the ping test. I don't know if the ping test really did anything to help but I've had cell service since following these steps.
Click to expand...
Click to collapse
Unfortunately that's what I did initially. The setting in that link ("Cellular") made my calls work, but I could only get 1X data.
So somehow by just flashing and reflashing different things (including failing to reflash to stock), it's back to where it was when I started.... which sucks, but is at least useable. Calls work and data works, but the first time it has to drop back from LTE to 3G, it get stuck in 3G forever (until airplane mode). Super sucks since it's my primary home router tethered. I have to airplane mode like 5 times a day.
Just in case someone else ran into this problem, I ended up getting a new sim from Verizon and everything's working now finally. It still says "000000" when it's in 3G, but I don't care about that - it works and it goes back to LTE when it can, rather than staying on 3G forever.
Works for Moto X play - should work for others too..
I too did the same mistake. Changed my Band to "USA" and couldn't restore to previous despite Factory reset.
The SIM 1 went into 4G data only (No voice) , didn't recognize 2G & 3G network for any sim.
However Sim 2 worked fine for 2G,3G & 4G.
i came across a thread in XDA, and after breaking my head over how to execute it, I finally did it.
I have written a brief guide to it. Here's the link.
http://forum.xda-developers.com/moto-x-play/help/network-band-changed-to-usa-t3278614#post65991684