I have never had this happen before. but i lost usb connection while flashing with ODIN. I am stuck at "use the emergency recovery function in the smart switch PC software" message.
I have tried both smart switch and kies, both are telling me that that the SM-G973F/DS does not support initialization
***dead battery fixed it, got back in odin after it died*
Related
[Q] Phone Dead after kies restarted PC while updating then using Odin3 to "recover"
So my PC suddenly restarted while installing 2.2 on my phone. When I started up again it could not use its "emergency recovery". I searched for help and found a place where they had the exact same problem fixed it via "Odin3 Flasher" (google "Stock Firmware Odin3 Flasher" to get the exact guide I followed)
My phone is from Norway so I do NOT have at&t but now that i followed those instructions, all my phone does is flash on and off "at&t world phone", and I cannot get into download mode again. When I plug in the USB the at&t logo stops flashing and it goes completly black.
How can I get into download mode or fix this?
same thing happen with me today
the same thing is happened with me today when i used the ODIN3 v1.00.... Please help me...
you will need to make or purchase a usb jig : http://www.1giftbuy.com/p-10279-i9000-i9100-micro-usb-download-mode-jig-/?currency=GBP , then you will be able to use odin to flash a stock rom
Search on the forum, you can install android SDK, set usb debugging and then do an adb reboot quickly from computer after attaching the uab cable. I had the same brick problem, and I fixed it without usb jig.
Sent from my GT-I9000 using XDA App
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
I tried to change the phone to the original rom and in the middle of the process it failed and a screen with a message appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.". I saw some videos saying that you can enter the download mode and fix it with odin but I can't enter. Also I read that if you can't enter the download mode is because of the bootloader, I found a rom with the PIT, PDA, CSC, BOOTLOADER and PHONE files but the problem is that when I plug it to the pc it doesn't even recognize the phone, not even a message saying that windows couldn't recognize it and I have all the drivers installed or the typical sound that the pc makes when you plug something in the usb port. I don't know what to do.
Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box
Hello, I am currently using an Galaxy S10 SM-G973F and I have a big problem at the moment, I have updated my mobile phone and now I get this error message "An error has occurred while updating the device software Use the emergency recovery in the Smart Switch PC software. ", I tried to restore my cell phone with smartswitch but unfortunately it does not work, smart switch does not recognize my cell phone. What can I do now?
Maybe this helps. Mine is a S10+ Exynos SM-G975F. Not sure, but initial search says 973F is exynos too. Also not sure if it would also work with Snapdragon models (are there any for the S10?).
Anyhow, look here:
An error has occurred while updating the device software
Hi! So my phone is stuck with the "an error has occurred while updating the device software" and that screen only shows when i charge my phone with wall brick. If i try to connect my phone with usb to pc nothing happens. Even if i try to enter...
forum.xda-developers.com