Hello everyone , i have the "pleasure" to see a problem what never seen and nobody posted on any site. My huawei mate 20 lite cannot be factory reseted , The factory reset buton inactive in settings and recovery mode too. I have tried to flash with many update.app from sdcard/dload/updateapp but always error. Please somebody help me. Thank you
If you are part of a domain that can be the reason. But since you tinkered with your phone I guess that's not the case. You cannot use huawei pc software to reset or recover your phone. But on your phone there is scroll restriction. On the reset screen it gives a summery of what will happen if you continue and you have to scroll down to very bottom in order for the button to become active. Certain certificates installed on a device can restrict some features but I have never seen any that stops you from resetting your device. Sorry if this isn't helpful.
Related
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Try to install 3rd party keyboard via moboginie... Make sure the developer option and debugging is enabled. Then try the rollback package. It should work then
But the thing is that i can't even enter developer options to enable debugging.. because I cant get past adding a google account to my device. I don't have access to my android at all. I dont have access to my P9 from my PC when i connect it via usb aswell.
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
I had a similar problem today. So I was on EVA-L19C432B383 and wanted to downgrade to EVA-L19C432B378 with dload method.Updated went 100% then a message came up at boot stating storage requires password or something like that. Then I read on a forum to wipe data/factory reset. I did that and the problem with the keyboard appeared(only voice). Flashed like 10 stock roms but didn't manage. SOOO finally after 7 frustrating hours I was able to flash (dload method) the rollback from N to MM update from this link www .stechguide.com/downgrade-huawei-p9-from-android-nougat-to-marshmallow/ the european version (Download Huawei P9 Nougat Rollback Package for EVA-L09 (Europe) it works for L19 also) and then I flashed the rom EVA-L19C432B182. Thank god It was alive again (the rom I downloaded using firmware finder for pc). Hope it helps!
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
you have to flash the data package from my twrp, you just updated the core system.
Could you give me your current build id? (example: L09CxxxBxxx)
this is exactly what happened to my p9+
any solutions? mine is still stuck like this. the only firmware that finished installing is the south east asia but when it optimizes the phone, it fails. and back to nrd90m.
step by step guide on how to fix this please?
Hi Guys,
I think I have no lucky these days...
I was testing a new ROM and when a returned the backup with TWRP android asked me a patteren for unlock.
The patter I usauly use dont work.
I found a help that say to erase some files in /data/system but it doenst work...
I had a idea to block the cell with my google account and set a new PIN for unnlock... It doenst work
Now I have the cell blocked by google and its impossible to access the internal memory with TWRP...
I need help... I dont know what to do...
Please !!!!
Sounds like your only way back is to format/delete all your data and start from scratch. You can use fastboot to do this.
I think this is the way... but I never did this before...
Do you know a step by step to do this !?
If I understand rightly you have a Google locked phone. I have not tried this on the OP3T but if you are able to reach the boot up screen where Google asks you for the password/pattern lock, you can try inserting an OTG drive of any capacity into your device. The phone will ask for changing storage. After clicking 'OK' you will be taken to the storage section. Go to 'Apps' and from there to 'Setting'. If you are able to reach this far, do a complete reset from that 'Settings' section and you would be able to recover your phone. I repeat, I have not tried this on the OP3T but have successfully tried this on some other phones. Best of luck and hope you get back your toy.
Let me also add that you won't be able to recover a Google blocked phone by factory resetting from recovery. The only way to do this is to reset it from the settings section of the OS itself after you have booted up.
shantanil said:
If I understand rightly you have a Google locked phone. I have not tried this on the OP3T but if you are able to reach the boot up screen where Google asks you for the password/pattern lock, you can try inserting an OTG drive of any capacity into your device. The phone will ask for changing storage. After clicking 'OK' you will be taken to the storage section. Go to 'Apps' and from there to 'Setting'. If you are able to reach this far, do a complete reset from that 'Settings' section and you would be able to recover your phone. I repeat, I have not tried this on the OP3T but have successfully tried this on some other phones. Best of luck and hope you get back your toy.
Let me also add that you won't be able to recover a Google blocked phone by factory resetting from recovery. The only way to do this is to reset it from the settings section of the OS itself after you have booted up.
Click to expand...
Click to collapse
Perfect!
I did exactly this and now I recovery the cell...
Thanks a lot!
You save my day!
Dear All!
Here is one desperate guy turning to you because I see from some XDA posts, that you know about twrp and Huawei devices quite something.
At first, I don't want to waste your time. If you can help me, I will be happy to compensate it because I'm quite serious on this (and desperate as well).
I'm a beginner on Android rooting world, and in a nutshell, I enjoy just putting my Android device to the limits and enjoy using them to the fullest.
Bad thing, that I sometimes take too much risk and this time it ended with a (Soft) bricked phone.
The phone is from a rental company, that is why I'm so stressed to get it back and going.
So getting to the point:
Device: Huawei P10, VTR-L29C432B123
(C432, as I understand, is European version and it's important here)
Current state: Device is unlocked, rooted and with TWRP 3.1.1. (TWRP installed by this post https://forum.xda-developers.com/p10/development/testers-twrp-t3585256 and rooted by this post https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946)
After installing TWRP and Rooting device I happily enjoyed using it for some time but
things went wrong when I started to try to put back Stock rom. (+ unroot and lock the device as well).
I tried multiple posts on the internet and didn't succeed. Unfortunately, FLashify and alike apps didn't work (or crashed after installing) on my P10, therefore, I turned to TWRP.
At first, I tried to install stock firmware downloaded from Firmware Finder but TWRP put out error:
E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip '/external_sd/dload-draft/update.zip
Then I tried some other ways and turned to wipe section. Deleted Catches and data and then also system. This I believe f-ed things up and (of course) I could not boot anymore.
Can you instruct me on installing Stock rom for my device and get it back and running?
Thank you very much and please let me know if some more info is necessary!
@paratox @OldDroid @XePeleato @Dejan Kruljac Guys, if you could take a look on this and give me a direction - I would be enormously thankful!
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
What does it mean to debrand a device?
It helped. Jeezh
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Jaunpetrovics said:
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Click to expand...
Click to collapse
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
M1chiel said:
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
Click to expand...
Click to collapse
He's right. My P10 had no os installed no recovery and the huawei e recovery wasnt working, this thing will fix the most bricked of phones. 10/10 would brick again. :good:
Would my phone work ?
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
edit : I have relocked my bootloader which leaves me no TWRP
Would this also work for me (VTR-L09)
I bought the phone from Vodafone Australia and I am stuck in erecovery right now, when I try to update through the dload using a FAT32 sd card the update.app won't even copy onto the sd card as it is larger than 4GB. When I try to do it using an sd card formatted to NTFS it stops at 5% and states "software install failed!"
Please help me on what to do... any help would be appreciated
Huawei P20 lite dead
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
YulmarRSA said:
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
Click to expand...
Click to collapse
I can assume that your memory is out of order.
I understood correctly, when you turn on the cubes? You did not flash board firmware?
i have no idea wtf is going on i have alot of photo on it
do i really have to factory reset?
Would be helpful if you could tell us more about the configuration of the phone (ROM, rooted or unrooted/recovery).
This could just as well be something being caused by an app.
You can try to go into erecovery and update, this should not wipe your data.
hello to all.
first of all i hope to get some help in this page.
so recently i have changed the display from p30 pro and before the rebuild,i check if the display works ..so it worked i was happy everything was fine...then i build everything together and i tried to open the device so i can use it again...but suddenly it opened to e-recovery mode and doesn't matter how many times i try everything to open my device its impossible... i tried the to download the latest version it failed,i try to safe-mode failed again, tried with PC hisuite not supportet the VOG-L29 so please if anyone knows how to make it work again without deleting everything and start again let me know!!! the only reason that i dont want factory reset its because i don't wanna lose every file every fotos etc...
I have exactly the same problem. Any solution?