I have been using Malaysian firmware , made in Vietnam
Galaxy note9 model :SM-N960F in Pakistan.
Android Version: 8.1.0
Samsung Experience Version:9.5[/B]
but till date I am unable to upgrade my phone to Pie-9 version , whenever i tried
automatic update or manually daily many times always got below message
" The latest updates have already been installed.
current version:N960FXXS2ARK2/ N960F0XM2ARK2/N960FXXU2ARJ1
Security patch level: November 1,2018."
please. advise and respond as i know that all over the
world note9 have been updated to pie9 software then why mine phone not
getting it,im really upset !!! your guideline shall be highly helpful.
Reply some expert one the issue with the phone please, what can be issue phone not update able to pie 9 software by default??????
Why don't you go and download latest firmware from Sam mobile of using SamFirm and flash using Odin to get your device up-to-date? Malaysian firmware just came out a few days ago with many security patch
Related
Hi everyone...
what is the update on KIES likely to be called?
I can see on KIES
Current firmware version - PDA:JJ3 / PHONE:JID / CSC:JJ3 ( CPW )
Latest firmware version - PDA:JJ7 / PHONE:JK5 / CSC:JJ5 ( CPW )
I am not sure why it shows ( CPW ) and get the feeling it is not the Gingerbread update.
Any advice much welcomed!
Ofiaich
This is same as mine that's a update to froyo I have the cpw aswell
thanks jutley!
I bought mine from Staples
So waste of time to do that update?
Ofiaich
Just wait. I went from JJ3 to JMI the other week (tesco tab)
Was that a Kies update or OTA (or did you manually flash)?
I'd not heard of anyone in the UK getting the update through Kies/OTA yet.
Guys, Gingerbread is only available in Italy at the moment. If you are waiting for Gingerbread you need to keep an eye on your countries official site, Until its on there you wont be able to get it via Kies.
Just connected to KIEs and got the following firmware update:
PDA:JMI / PHONE:JMA / CSC:JM2 (CPW)
Am I right in assuming that this is a Froyo release?
Yes that still is froyo-released in January for Europe....
I have my tab since December. It only updated to JMI/JMA/JM2 (CPW) via Kies today (June 21st).
Got it from the UK and am in Portugal.
Any idea why it took so long to get an outadated update? It was updated to JJ7/JK5/JJ5 (CPW) since January, I think.
I was really looking for GB here :-/
absolutab said:
I have my tab since December. It only updated to JMI/JMA/JM2 (CPW) via Kies today (June 21st).
Got it from the UK and am in Portugal.
Any idea why it took so long to get an outadated update? It was updated to JJ7/JK5/JJ5 (CPW) since January, I think.
I was really looking for GB here :-/
Click to expand...
Click to collapse
NOBODY EXCEPT SAMSUNG KNOWS ABOUT UPDATES.....and they also have pulled out the previously leaked(take note-leaked-not officially provided) Italian gingerbread without any reason.
Note: CPW is sales code for UK-no updates for UK......
Yesterday I connected to Kies and got the prompt to update firmware to Gingerbread.
I thought "great" and followed the on screen instructions. Anyway, the update failed, probably due to me running other programs at same time and not turning firewall/virus settings OFF.
So I did the 'emergency recovery' and ended up back where I started, with
PDA:JMI / PHONE:JMA / CSC:JM2 (CPW)
Now Kies says there is no update available, in so much as onthe Basic Information tab, it says the above firmware is the 'latest' one.
Anyone know why this might have happened, and how I can get Kies to recognise the Galaxy Tab (GT-P1000) is due a firmware update ?
I'm reading a lot of cloak and dagger stuff coming out about the Kies system and updates. Does this update come and go from the Kies system ? That would be odd....
cheers
Tony
We in Asia just got our second gingerbread update-from DXJPC to JPD.......!
bongski55 said:
NOBODY EXCEPT SAMSUNG KNOWS ABOUT UPDATES.....and they also have pulled out the previously leaked(take note-leaked-not officially provided) Italian gingerbread without any reason.
Note: CPW is sales code for UK-no updates for UK......
Click to expand...
Click to collapse
I understand that Samsung is the only one knowing when updates are done. My question was because I got an update yesterday that everyone got in January, for what I read in the forums.
Just found it weird and hoped someone had a clue!
absolutab said:
I understand that Samsung is the only one knowing when updates are done. My question was because I got an update yesterday that everyone got in January, for what I read in the forums.
Just found it weird and hoped someone had a clue!
Click to expand...
Click to collapse
Weird indeed-that Asia got 2 gingerbread updates in a span of 2weeks while the rest of the world had none since January.
Sent from my GT-P1000 using Tapatalk
Dear all,
First, I'm from the Philippines and I purchased my Galaxy Note from a local appliance store here first week of December.
Checking the software version of the unit indicates the following: Android Version: 2.3.5, Baseband Version: N7000DXKJ3, Kernel Version: 2.6.35.7-N7000DXKK1-CL706642, Build number: Gingerbread.DXKK1.
The software for the phone is stock, and basing on what I have read on the forums so far, upgrading it may lead to an improvement of the phone's battery life.
Question: As I am in the Philippines, is there a way to officially upgrade the software version via wi-fi (or OTA as I assume the term means "Over-The-Air"), OR is there even an available software update where I live, since every time I try doing so, I always get the "No Update Available" response from the server?
Thanks in advance for the help and advanced happy new year to all.
Bump, help please? Or a link to a previously discussed solution? Thanks.
Hi,
I have a galaxy note 9 uk on three network i just updated to the note update and its shocking so i want to reflash my phone on odin but i always get confused on which is which.
Before i flash i copied what my phone said for sofware information:
Andriod version:
8.1.0
Samsung experience version
9.5
Baseband version
N960fxxu2arl1
Build number
M1AJQ.N960FXX52ARL2
Andriod security level
1 december 2018
Please someone let me know which firmware i should be patching
I can see ee and btu versions but no three network version on samsmobile
Thanks
Aaron
faser2033 said:
Hi,
I have a galaxy note 9 uk on three network i just updated to the note update and its shocking so i want to reflash my phone on odin but i always get confused on which is which.
Before i flash i copied what my phone said for sofware information:
Andriod version:
8.1.0
Samsung experience version
9.5
Baseband version
N960fxxu2arl1
Build number
M1AJQ.N960FXX52ARL2
Andriod security level
1 december 2018
Please someone let me know which firmware i should be patching
I can see ee and btu versions but no three network version on samsmobile
Thanks
Aaron
Click to expand...
Click to collapse
HG3 is UK 3 network here your firmware you need to move back to 8.1 https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/H3G/download/N960FXXS2ARL2/248052/
Thank you so much your a brilliant person sir.
May God bless you abunduntly
Thanks
Hey Guys, so apparently every friend of mine with either note 8 or s8 is rocking the new ONE UI and I still have no update..
Where can I get the PIE(ONE UI) update for my device.
Device Name: N950U
Current Version: N950USQS5CRK2/N950UOYN5CRK1/N950USQS5CRK1
Security Patch Level: 1 December 2018
Cjkumz said:
Hey Guys, so apparently every friend of mine with either note 8 or s8 is rocking the new ONE UI and I still have no update..
Where can I get the PIE(ONE UI) update for my device.
Device Name: N950U
Current Version: N950USQS5CRK2/N950UOYN5CRK1/N950USQS5CRK1
Security Patch Level: 1 December 2018
Click to expand...
Click to collapse
A Factory reset can sometimes fix the OTA not coming through, just back up your data.
Or you can download the official filmware from either sammobile or updato and then flash it with Odin (13.3.1)
stonedpsycho said:
A Factory reset can sometimes fix the OTA not coming through, just back up your data.
Or you can download the official filmware from either sammobile or updato and then flash it with Odin (13.3.1)
Click to expand...
Click to collapse
Ok I will try reset for now then try. Thanks.
Would you happen to know what happens if you download a firmware from a different carrier?? Does it lock the phone or can I get any firmware as long as it is for N950U??
Cjkumz said:
Ok I will try reset for now then try. Thanks.
Would you happen to know what happens if you download a firmware from a different carrier?? Does it lock the phone or can I get any firmware as long as it is for N950U??
Click to expand...
Click to collapse
I am unsure with the U version, so I would be guessing on that.
Any Update
Hi,
I am facing the same issue, I just buy a Note 8 and i was in doubt that may be that phone is not original.
Did anyone got the solution to upgrade it?
Kindly share the experience i would like to upgrade my phone firmware as well
Thanks
Just check Sammobile. It appears Pie has already been released for the N950U
iceepyon said:
Just check Sammobile. It appears Pie has already been released for the N950U
Click to expand...
Click to collapse
Did you know the right frimware when the
Bootloader Version :
N950USQS5CRK1
PDA Version :
N950USQS5CRK2
CSC Version:
N950UOYN5CRK1
Baseband Version:
N950USQS5CRK1
can update to android pie? , and what the frimware version should install?
can this frimware N950USQU5DSD3 be used?
alfinmulyadi33 said:
Did you know the right frimware when the
Bootloader Version :
N950USQS5CRK1
PDA Version :
N950USQS5CRK2
CSC Version:
N950UOYN5CRK1
Baseband Version:
N950USQS5CRK1
can update to android pie? , and what the frimware version should install?
can this frimware N950USQU5DSD3 be used?
Click to expand...
Click to collapse
Since you have N950USQS5CRK2 as PDA version currently, you will not get any updates period because it doesn't update from that version you'll need to do it yourself using odin and use this firmware from here.. https://androidfilehost.com/?fid=1395089523397966043
MrMike2182 said:
Since you have N950USQS5CRK2 as PDA version currently, you will not get any updates period because it doesn't update from that version you'll need to do it yourself using odin and use this firmware from here.. https://androidfilehost.com/?fid=1395089523397966043
Click to expand...
Click to collapse
This looks promising. I'll download this tomorrow. Thanks alot
MrMike2182 said:
Since you have N950USQS5CRK2 as PDA version currently, you will not get any updates period because it doesn't update from that version you'll need to do it yourself using odin and use this firmware from here.. https://androidfilehost.com/?fid=1395089523397966043
Click to expand...
Click to collapse
Thank you very much. I managed to get everything done with the second link. Much appreciated.
Note8 spen glitch
I WAS HAVING N950USQS5CRK2 8.0 ]N MY NOTE 8 BUT AFTER UPDATING TO 9.0 MY SPEN ISNT WORKING IT WAS WORKING IN PREVIOUS VERSION IT WAS WORKING AIR COMMAND NOT WORKING EVEN FLOATING ICON IS SHOWING ICON BUT NOT OPENING . AND SOMETIMES IT NOTIFIES ME TO ATTACH SPEN. BY THT NOTIFICATION IT IS CLEAR THAT THERE IS NO ISSUE WITH HARDWARE. PLEASE
TELL ME THE SOLUTION I AM NOT GETTING FIRMWARE OF MY PRIVIOUS FIRMWARE AS WELL IF SOMEONE CAN HELP ME I WILL BE VERY THANKful!!
Hello I would kindly need some help too, my version is
950USQU1AQI5, do i have any stable firmware upgrade ?
Sent from my SM-N950U using Tapatalk
Can someone help me ? I want to download the s10 g937fxxu9dtja .. for a version one ui 2.1 can someone help me?
Download firmware updates for your Samsung mobile phone and tablet
Firmware for Samsung Galaxy mobile phone & tablet ✔ Find any update, ever released by Samsung. ✔ Free downloads & high-speed options available. ✔ For all versions and all devices. ✔ Including instructions
www.sammobile.com
Search for your model number and find the firmware version, download it and flash using Odin. It will completely reset your device though.
raphael rei said:
Can someone help me ? I want to download the s10 g937fxxu9dtja .. for a version one ui 2.1 can someone help me?
Click to expand...
Click to collapse
Dear friend i have the same problem but with the beta update ui.3.0 ... the problem here is the security pacht from samsung call ¨binary¨... this update that you perform in your s10 it´s imposible to do downgrade because you update to binary 9 and the rom with one ui.2.1 or 2.0 have the security pach with binary 8 ... in my case the only solution to back stock rom was find a rom with binary 9 of my country. You can see which version of binary contains in the name of the rom for example actually i have install in my device this rom G973FXXS9DTK9 the number before the letters says what binary contais the rom if you look in your device in system info , about the phone , version of software says what binary you have ...