what is your favorite GravityBox tweaks? - OnePlus 7 Pro Guides, News, & Discussion

For me, I like to show the data traffic monitor in status bar.
And I'd like to adjust the brightness by sliding through the statue bar.
I've been used these features for years. That is why I install the GravityBox.

Ongoing notification blocker

Def being able to put day dd/mm/yy next to clock in center of status bar for me. I've just had this since switching to android in 2014. Can't stand not being able to have it. It's why I waited for op7p so I can have uninterrupted status bar. I HATE notches. It's why pixel was non starter...

skj8100 said:
Def being able to put day dd/mm/yy next to clock in center of status bar for me. I've just had this since switching to android in 2014. Can't stand not being able to have it. It's why I waited for op7p so I can have uninterrupted status bar. I HATE notches. It's why pixel was non starter...
Click to expand...
Click to collapse
I'm the exact same way. I pretty much root in order to be able to change my clock position and to use Viper.

Is gravitybox available for the OP7P?

The network traffic information is available as a stock option in OxygenOS under status bar customization.

Strike99Fear said:
Is gravitybox available for the OP7P?
Click to expand...
Click to collapse
It works.
In magisk search "riru" and install riru core and riru edXposed sandhook
Then you can search "GravityBox [P]" in edXposed installer on your phone
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v9-0-0-beta-1-android-9-t3908768/

Dunno. Boot loops for me ?

Reuben_skelz92 said:
Dunno. Boot loops for me
Click to expand...
Click to collapse
I installed these 2 in magisk rebooted then installed the APK. Using just gravity box and working great, still passing safety net

mac796 said:
I installed these 2 in magisk rebooted then installed the APK. Using just gravity box and working great, still passing safety net
Click to expand...
Click to collapse
Just note that current GravityBox won't recognize your system as OxygenOs for Op7Pro when ROM signature (name) differs from the stock one which I think is the case for Renovative ROM. You will miss quite a lot of OxygenOs specific adjustments and features.

C3C076 said:
Just note that current GravityBox won't recognize your system as OxygenOs for Op7Pro when ROM signature (name) differs from the stock one which I think is the case for Renovative ROM. You will miss quite a lot of OxygenOs specific adjustments and features.
Click to expand...
Click to collapse
I'll keep on the look out. But so far everything seems good. I did uninstall renovate earlier to test some things

Reuben_skelz92 said:
Dunno. Boot loops for me ?
Click to expand...
Click to collapse
Me too, bootloop Everytime I try

Here is my setup. Been using sandhook until now but currently testing yahfa.

mac796 said:
I installed these 2 in magisk rebooted then installed the APK. Using just gravity box and working great, still passing safety net
Click to expand...
Click to collapse
I did the same. Didn't work for me. You on stock or custom kernel?

Reuben_skelz92 said:
I did the same. Didn't work for me. You on stock or custom kernel?
Click to expand...
Click to collapse
Elemental, it also worked for my buddy
---------- Post added at 07:26 AM ---------- Previous post was at 07:24 AM ----------
C3C076 said:
Here is my setup. Been using sandhook until now but currently testing yahfa.
Click to expand...
Click to collapse
Were you able to take the update. Mine errors out every time I try to take the update

mac796 said:
Elemental, it also worked for my buddy
---------- Post added at 07:26 AM ---------- Previous post was at 07:24 AM ----------
Were you able to take the update. Mine errors out every time I try to take the update
Click to expand...
Click to collapse
What update exactly do you mean?

C3C076 said:
What update exactly do you mean?
Click to expand...
Click to collapse
Sorry, Xposed. Told me it had an update. I couldn't get it to work

Reuben_skelz92 said:
Dunno. Boot loops for me
Click to expand...
Click to collapse
Hey another thing I'm running BusyBox module by osmosis. Not sure if that'll change things for you

mac796 said:
Sorry, Xposed. Told me it had an update. I couldn't get it to work
Click to expand...
Click to collapse
You mean update of EdXposed installer app? Don't use it. It's somehow bound to a different installer it was forked from. Installer updates can be get from https://github.com/solohsu/XposedInstaller/releases

Related

xposed is here

http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
go flash
Not working for me. Anyone get it to work on the N6?
Nobody with an N6 has reported it working so far in the Xposed thread. Kinda frustrating that the most important Android phone out is the only one that can't seem to get it going.
Rovo89 says, Note that this is still an alpha version and for Lollipop on ARMv7+ devices only. Please install it only if you're willing to take the risk of boot loops. Just because it's working fine and stable for me doesn't mean it will work for everyone the same way.
Sane1 said:
Not working for me. Anyone get it to work on the N6?
Click to expand...
Click to collapse
nope not here but wont be long by the looks of it
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
See thread in n6 general. Yea you have to soft reboot to have xposed run after you are in permissive mode for selinux. Its the only way right now. If you full reboot, xposed runs before selinux is permissive
Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else
stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
That's likely your kernel not allowing it to write to system. I could be wrong though but this happened to me on jellybean.
troyd28 said:
Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else
Click to expand...
Click to collapse
Works great what's up with yours
Can't find the second link that works on the nexus 6
Jeremiah_1988 said:
Can't find the second link that works on the nexus 6
Click to expand...
Click to collapse
You don't need a second link download the two files. Download selinux make sure you set permissions to permissive. Boot into recovery flash framework, boot up install xposed, reboot into recovery again install framework. If it does not active do a soft reboot in xposed
Sent from my Nexus 6 using XDA Free mobile app
What modules are actually working on our gadget please?
I got RootCloak working. To verify this I opened Soft Card before Xposed was installed and it detected root. After Xposed was installed, I then installed RootCloak, checked the box in modules, added Soft Card in the app. Then I went back to Xposed and did a soft reboot. Then I rechecked Soft Card and it worked!
marvi0 said:
What modules are actually working on our gadget please?
Click to expand...
Click to collapse
i got youtube away and gel settings there the only ones ive tried so far
Crappalinks works.
jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
brizey said:
Crappalinks works.
Click to expand...
Click to collapse
Great that's a good start at least. Haven't used exposed for so long, so got used to not having it.
jaythenut said:
Works great what's up with yours
Click to expand...
Click to collapse
Didn't install it yet. It seems to be a process besides most features I used were implemented on lollipop so I shall wait.
jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app
stafly17 said:
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
It works, but I did not get the results I wanted. It may be the way lollipop handles things, but i tried to get the tablet style settings by picking a high resolution and it worked but was all crammed in the middle. So...the xposed module works, but lollipop may give you some trouble.

Center Clock for 6P

Tulsadiver said:
For those that like a center clock. Flash zip via your favorite recovery.
If you like it, don't forget to hit the thanks button!
Center Clock
https://www.androidfilehost.com/?fid=24052804347852255
Center Clock AmPm
https://www.androidfilehost.com/?fid=24269982086988170
Center Clock AmPm Date
https://www.androidfilehost.com/?fid=24269982086988167
Center Clock AmPm Day
https://www.androidfilehost.com/?fid=24269982086988168
Hide Battery
https://www.androidfilehost.com/?fid=24269982086988739
Unhide Battery
https://www.androidfilehost.com/?fid=24269982086988741
Click to expand...
Click to collapse
flashed the Center Clock zip on my 6P yesterday with no issues. enjoy!
cantsingh said:
flashed the Center Clock zip on my 6P yesterday with no issues. enjoy!
Click to expand...
Click to collapse
Yes, these are status bar.xml replacement only. Not the entire SystemUI.
Center clock and hide battery worked perfectly. Thanks!!
TaPpEd FrOm My GrApHiTe 6p
How can this be removed?
arampapaz said:
How can this be removed?
Click to expand...
Click to collapse
you could either replace the modified statusbar.xml with an original that you backed up or extracted from a factory image.
OR just flash the system.img from the factory image.
ipfreelytech said:
you could either replace the modified statusbar.xml with an original that you backed up or extracted from a factory image.
OR just flash the system.img from the factory image.
Click to expand...
Click to collapse
OK, thanks
Hey could you post some screens of the different options?
Sent from my Nexus 6P using Tapatalk
Edit
Does anyone have the stock statusbar.XML? I'm using a Mac and can't mount the system IMG to extract it. If anyone could help me out, I'd appreciate it. Thanks!
just flashed this over Cataclysm, doesn't work Really wish Cataclysm had status bar date and day settings.
Glad Chroma already has it... Google should include it as a stock feature!
galaxys said:
Glad Chroma already has it... Google should include it as a stock feature!
Click to expand...
Click to collapse
It's so basic every other ROM has it! I don't quite understand why the dev's decision to exclude it is because it takes up too much space. Is the Nexus 6P not one of the biggest phones out there? I'm sure the majority of ROM users adjust the dpi to allow for more space. And it's an option that can be enabled or disabled! The dev allows every other icon/text to be enabled/disabled, why not one more? The ROM is great overall though so it just sucks not having this haha.
Very cool!
Does this work now in 7.1.1
boxguy1 said:
Does this work now in 7.1.1
Click to expand...
Click to collapse
Backup. Flash. Report.
If i can only backup right now. My battery is about to die lol
infamousvincci said:
Backup. Flash. Report.
If i can only backup right now. My battery is about to die lol
Click to expand...
Click to collapse
Nah am just going to wait for someone to test it thanks tho
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
cantsingh said:
flashed the Center Clock zip on my 6P yesterday with no issues. enjoy!
Click to expand...
Click to collapse
You did it with 7.1.1?
boxguy1 said:
Nah am just going to wait for someone to test it thanks tho
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
You did it with 7.1.1?
Click to expand...
Click to collapse
Tested with 7.1.1, didn't work. SystemUI constant force close. Had to restore from backup.
thenestor said:
Tested with 7.1.1, didn't work. SystemUI constant force close. Had to restore from backup.
Click to expand...
Click to collapse
Thanks I appreciate it hopefully someone updates

Xposed Framework

I have a rooted fire with version 5.1.1 and OTA updates blocked. Is Xposed Framework safe to install?
Thanks,
Sumaech said:
I have a rooted fire with version 5.1.1 and OTA updates blocked. Is Xposed Framework safe to install?
Thanks,
Click to expand...
Click to collapse
Don't think you can on 5.1.1
ldeveraux said:
Don't think you can on 5.1.1
Click to expand...
Click to collapse
calxk713 said they did once rooted.
http://forum.xda-developers.com/showpost.php?p=64353835&postcount=6
On the default firmware? I just tried with SlimLP and had no luck, boot looped.
Pond-life said:
calxk713 said they did once rooted.
http://forum.xda-developers.com/showpost.php?p=64353835&postcount=6
Click to expand...
Click to collapse
If you already knew your answer, why ask? Maybe ask him, or in that thread?
KennBr said:
On the default firmware? I just tried with SlimLP and had no luck, boot looped.
Click to expand...
Click to collapse
Xposed functionality was disabled in slim due to the developer. Works perfectly well on cm12 though.
Safe?
Define safe. What one considers safe, another may consider too risky. Some xposed modules will always run the risk of problems. Always a chance you might have to reinstall your rom & restore your backups. Xposed modules can do some low level modifications to your system, it will never be "safe".
---------- Post added at 05:18 AM ---------- Previous post was at 05:14 AM ----------
ldeveraux said:
Xposed functionality was disabled in slim due to the developer.
Click to expand...
Click to collapse
Xposed was never "disabled" in slim. It was just incompatible with the ART optimizations that served to speed up the rom.
Xposed works fine in the SlimLP 0.13 build, it was made to be xposed compatible. Big thanks to csolanol, Slim Fire developer.
ldeveraux said:
If you already knew your answer, why ask?
Click to expand...
Click to collapse
You appear confused. Pond-life is not the OP, he did not ask.
blueberry.sky said:
Safe?
Define safe. What one considers safe, another may consider too risky. Some xposed modules will always run the risk of problems. Always a chance you might have to reinstall your rom & restore your backups. Xposed modules can do some low level modifications to your system, it will never be "safe".
---------- Post added at 05:18 AM ---------- Previous post was at 05:14 AM ----------
Xposed was never "disabled" in slim. It was just incompatible with the ART optimizations that served to speed up the rom.
Xposed works fine in the SlimLP 0.13 build, it was made to be xposed compatible. Big thanks to csolanol, Slim Fire developer.
You appear confused. Pond-life is not the OP, he did not ask.
Click to expand...
Click to collapse
Right on all accounts. I'll just go back here now...
KennBr said:
On the default firmware? I just tried with SlimLP and had no luck, boot looped.
Click to expand...
Click to collapse
Well the dev is pretty clear that it doesn't work on normal SlimLp, I'm not sure what they could have done to be more clear really.

removed

removed
This rom has splitscreen, double tap to recent app, one finger swipe to expand notifications?
Shaquille234 said:
This rom has splitscreen, double tap to recent app, one finger swipe to expand notifications?
Click to expand...
Click to collapse
spiltscreen only available 7.1.2 Android N , Miuipro not Release Android N For Markw , Wait For Android N Update
I don't think this post is suppose to be here
aldirudianto said:
I don't think this post is suppose to be here
Click to expand...
Click to collapse
why sir ?
NasiMNi said:
why sir ?
Click to expand...
Click to collapse
This section is only for development purpose, while you're only share a link, you should post it in news& discussion section
In 'guides, news and discussion' section I've had a thread about miuipro for a long time. I think that's enough to let the people know about it
Sent from my Redmi 4 Prime using Tapatalk
Shaquille234 said:
This rom has splitscreen, double tap to recent app, one finger swipe to expand notifications?
Click to expand...
Click to collapse
It supports double tap and swipe up and swipe down gestures. You can customize their actions too[emoji7] but split screen isn't available in android M [emoji17]
Sent from my Redmi 4 Prime using Tapatalk
aldirudianto said:
This section is only for development purpose, while you're only share a link, you should post it in news& discussion section
Click to expand...
Click to collapse
I dont think so I just share it and i dont mention that i develop it , and your link outdated see please ur link there is no link
NasiMNi said:
I dont think so I just share it and i dont mention that i develop it , and your link outdated see please ur link there is no link
Click to expand...
Click to collapse
Because you're not who built it, only share someone else's builds, you should post it in news, discussion section. Well, i am not a mods, i am just telling you
Which languages does it has?
Is this rom has Magisk included? I just found SuperSu, so I want to switch to Magisk. But, flashing Magis 14 failed via TWRP. @NasiMNi
leonardo4848 said:
Is this rom has Magisk included? I just found SuperSu, so I want to switch to Magisk. But, flashing Magis 14 failed via TWRP. @NasiMNi
Click to expand...
Click to collapse
You can't flash magisk if it has SuperSU, as the boot.img is modified. Magisk requires stock boot image.
I have tried this rom about 7 days, and it's amazing. Most perfect, except SuperSU. This ROM have an option to exchange from SuperSu to MagiskSu. It worked, and also universal safety net. But, it is confusing in installing Xpose Framework. When flashing systemless Xpose Framework sdk 23, 87.1, it's successful, but after that, I see MagiskSu fail safetynet test. I think this ROM just fit with SuperSu than MagiskSu. The MIUI Pro forum write and talk using Russian language.
leonardo4848 said:
I have tried this rom about 7 days, and it's amazing. Most perfect, except SuperSU. This ROM have an option to exchange from SuperSu to MagiskSu. It worked, and also universal safety net. But, it is confusing in installing Xpose Framework. When flashing systemless Xpose Framework sdk 23, 87.1, it's successful, but after that, I see MagiskSu fail safetynet test. I think this ROM just fit with SuperSu than MagiskSu. The MIUI Pro forum write and talk using Russian language.
Click to expand...
Click to collapse
You can't bypass safetynet after flashing xposed, it's kinda obvious. Removing xposed fixes safetynet bypass again.
Does this Rom supports spanish?
Shaquille234 said:
Does this Rom supports spanish?
Click to expand...
Click to collapse
Yes
leonardo4848 said:
Yes
Click to expand...
Click to collapse
Thanks
leonardo4848 said:
Yes
Click to expand...
Click to collapse
Which one is spanish? -_-
Shaquille234 said:
Which one is spanish? -_-
Click to expand...
Click to collapse
Terrible sorry, I just looked into community by country. Put your language request to the forum.

Mi9 notification icon fixing

hello to everyone
notification icon very annoying on how it is made
LordMayros said:
hello to everyone
notification icon very annoying on how it is made
Click to expand...
Click to collapse
I'm hopeful that this will work for our Mi 9, once we can unlock bootloader and root:
https://mi-globe.com/miui-notification-icons-for-notch-phones/
It is fixed in 9.3.21 global beta
Oh man that would be awesome!. Since switched to my new mi9 I miss some important messages if I forget to swipe down
So i just got my phone today and realized that new notification incoming just flash on status bar once and that's it. It's really terrible and I miss seeing the icons. Is there a way i can permanently keep notification icons on the status bar?
varun.gid said:
So i just got my phone today and realized that new notification incoming just flash on status bar once and that's it. It's really terrible and I miss seeing the icons. Is there a way i can permanently keep notification icons on the status bar?
Click to expand...
Click to collapse
It's a bug fixed in betas, so expect it on next software update.
cd993 said:
I'm hopeful that this will work for our Mi 9, once we can unlock bootloader and root:
https://mi-globe.com/miui-notification-icons-for-notch-phones/
Click to expand...
Click to collapse
ooo I like that setup.
V10 only means only the chinese ROM now right? .EU is on v9.x still?
EniGmA1987 said:
ooo I like that setup.
V10 only means only the chinese ROM now right? .EU is on v9.x still?
Click to expand...
Click to collapse
This is how I've got it setup right now (latest 28 EU rom with xposed, for the right hand side clock)
cd993 said:
This is how I've got it setup right now (latest 28 EU rom with xposed, for the right hand side clock)
Click to expand...
Click to collapse
can you explain which files did you use?
stokks said:
can you explain which files did you use?
Click to expand...
Click to collapse
I am bootloader unlocked, using the latest weekly EU rom (which has the setting to show notification icons:
https://xiaomi.eu/community/threads/9-3-28.49842/
Rooted with magisk v19:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Using xposed for Pie:
https://magiskroot.net/download-xposed-for-android-pie/
Using Gravitybox (am xposed module) for Pie to change clock to the right side:
https://www.google.com/amp/s/www.xda-developers.com/gravitybox-android-pie-xposed-framework/amp/
cd993 said:
I am bootloader unlocked, using the latest weekly EU rom (which has the setting to show notification icons:
https://xiaomi.eu/community/threads/9-3-28.49842/
Rooted with magisk v19:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Using xposed for Pie:
https://magiskroot.net/download-xposed-for-android-pie/
Using Gravitybox (am xposed module) for Pie to change clock to the right side:
https://www.google.com/amp/s/www.xda-developers.com/gravitybox-android-pie-xposed-framework/amp/
Click to expand...
Click to collapse
I cannot seem to find the gravitybox package for Pie in download list inside the xposed app... where is it?
stokks said:
I cannot seem to find the gravitybox package for Pie in download list inside the xposed app... where is it?
Click to expand...
Click to collapse
Their xda site is here:
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v9-0-0-beta-1-android-9-t3908768
Latest apk is here (underneath "Assets"):
https://github.com/GravityBox/GravityBox/releases/tag/v9.0.0-beta-6_p
GravityBox unlocker via the playstore:
https://play.google.com/store/apps/details?id=com.ceco.gravitybox.unlocker
cd993 said:
Their xda site is here:
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v9-0-0-beta-1-android-9-t3908768
Latest apk is here (underneath "Assets"):
https://github.com/GravityBox/GravityBox/releases/tag/v9.0.0-beta-6_p
GravityBox unlocker via the playstore:
https://play.google.com/store/apps/details?id=com.ceco.gravitybox.unlocker
Click to expand...
Click to collapse
I went into bootloop soooo... not working for me (at least Gravitybox), i will wait for a more stable version.. thanks anyway!
do we know if miui is going to fix this at some point?
stokks said:
I went into bootloop soooo... not working for me (at least Gravitybox), i will wait for a more stable version.. thanks anyway!
do we know if miui is going to fix this at some point?
Click to expand...
Click to collapse
Weird! Is that with just gravitybox module installed?
Works all good here.
As for any miui update, I doubt anything specific given really best compatibility is for AOSP roms, but perhaps request it via their threads
cd993 said:
Weird! Is that with just gravitybox module installed?
Works all good here.
As for any miui update, I doubt anything specific given really best compatibility is for AOSP roms, but perhaps request it via their threads
Click to expand...
Click to collapse
I just found out that in xiaomi.eu rom you can just activate notification icons from the settings... and they work correctly now without installing GB...
I think that for now I'm good like this
In the EU Rom (Global 10.2.17 Stable) it's a simple setting
- Notifications and Status Bar
- Show icons for incoming notifications
Edit : I confirm that icons also disappear in 10.2.22, they just were there a few more seconds. Dammit.
RedWave31 said:
In the EU Rom (Global 10.2.17 Stable) it's a simple setting
- Notifications and Status Bar
- Show icons for incoming notifications
> DONE
Click to expand...
Click to collapse
I also have this option on 10.2.17. But the icons still disappear after a few seconds.
Hannibal1471 said:
I also have this option on 10.2.17. But the icons still disappear after a few seconds.
Click to expand...
Click to collapse
same
Don't hate me, but I LOVE this "bug" , android is so pishy with notifications, I don't need to be reminded all the time that spotify is running for example, I mean I can tell that it's running since I'm listening to music. I wish we could just choose wish apps are allowed to show an icon on the status bar, that'd be something
Chad_Petree said:
Don't hate me, but I LOVE this "bug" , android is so pishy with notifications, I don't need to be reminded all the time that spotify is running for example, I mean I can tell that it's running since I'm listening to music. I wish we could just choose wish apps are allowed to show an icon on the status bar, that'd be something
Click to expand...
Click to collapse
It's not a bug, it's a feature. [emoji41]
I like it, and read about it a hundred times before buying this phone, don't understand how people are still surprised about it...
Edit: nevertheless, Xiaomi should give the option for it, aware that a lot of users dislike it, as they did with notch smoothing.

Categories

Resources