Related
I messed up my device after cooking a defective rom "I confused some folders", and now my phone stays at the sony ericsson logo.
I don't have and mmc reader in order to put a rom on it.....Can I flash the x1 through the pc on the bootloader screen??
I never do this but this time I'd really appreciate a quick response
Yes you can do it
I had to do it several times when my PC shutdown during flash...
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Hold the power button down and the volume down button at the same time you will see tri-colored screen...plug into computer run customruu follow prompts...
Regards,
WC
darkhalf520 said:
how plz ??....cuz i read how to flash using pc with the update utility but it seems I must first connect through activesync....tell me how you do it plz
Click to expand...
Click to collapse
1-put customRUU and your rom file in the same folder on your PC
2-launch customRUU
3-put your phone on tricolor screen
4-connect your phone to your PC with the USB cable (your phone should displau "USB")
5-follow the instructions in customRUU
It is the same way that you use when you flash with activesync but this time you put your phone on tricolor screen yourself
just put your device in bootloader mode, then connect to PC, the device can identify serial or usb connection in bootloader mode.
Thanks soooooo much everybody, damn I adore this community......
This will help a lot in the future as i get to cook more and more and risk the bricking every time, thanks !!
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
Hi All,
I tried to flash my phone from VZW firmware to unlocked firmware and my odin3b has been stuck on system.img.ext4.
I realized I hadn't installed the samsung drivers the first time around. I attempted to restart the phone as it was stuck on system.img.ext4 - following that my phone shows the screen:
"Software Update Failed Your device didn't update successfully. Use the Verizon Software Upgrade Assistant on a computer to repair your device and complete the update."
I'm unable to re-boot or do anything, when I hold power, bixby, volume down it presents me the warning screen before entering download mode. If I press Volume Up or Volume Down - I hit the same warning screen I typed up above. I am able to view the barcodes by pressing the bixby screen...
When I went back to Odin it still showed as "Added" when I plugged in the phone. I attempted the process again but it's still stuck on the same part.
Anybody have any suggestions of what I should attempt? I've been reading but have been unable to see any solutions.
Thanks for reading.
I Havnt played with the note 9 in terms of flashing or rooting as I have the SM-N960W Canadian Snapdragon version and there is no way yet. I've used Odin many times to flash and it can be fussy for a few reasons, I rooted my Galaxy S7 and nexus 5 and a few others. My tips would be....
First Uninstall Samsung driver.
Then Download "usbdeview" on your pc and Uninstall any previous USB connections labeled Android or Samsung or related, as this will allow you to start off as if it's a fresh connection.
Re-Install Samsung USB drivers, then....
Plug in Using stock OEM Samsung Note USB cord and wait for it to connect.
If no luck try a different USB port. USB 2.0 May work if your using USB 3.0 and it isn't.
Try a different version of odin, there are many, also running odin as administrator may help but not necessarily for sure.
If all this fails try on another computer or laptop. Make sure you only select the proper/necessary options in odin.
It sucks when things don't go as planned but that's the risk you take when you don't stay stock & update OTA. The steps I've written for you have fixed any issues I have ever run in to with odin & flashing but if yours was an incomplete flash and disconnected or interrupted mid way you may be stuck with an expensive paperweight I'm sad to say. Try contacting Samsung for proper odin version & odin settings, I wish you the best of luck. I am in no way a mobile phone technician but I've rooted many phones and always made it work. I hope you can too!
Best of luck!
flash back your official firmware to get back access to fone
if none of this works use smartswitch( it will reinstall drivers)
then tey again with odin 13.3 b using u1 firmware
also to get to dl mode power off the fone. if you have access to recovery ( reboot fone with vol down Bixby and power and quicly change to vol up bixy and pwr when you see it reboot)go there and choose shutdown phone. or let battery die and charge it for 10 mins and do while phone is off :
hold vol down and Bixby with one had and with the other plug the usb cable from rhe pc to fone.
The same problem happened with me. I wonder if anyone knows how to solve it?
Sukrus said:
The same problem happened with me. I wonder if anyone knows how to solve it?
Click to expand...
Click to collapse
Try your luck with different odin versions, different cable, different pc, different firmwares
As above first step Samsung USB drivers and Samsung USB cable .
Hi guys,
I think I have bricked my phone definetley. I did a couple of bad things. First I disconneted the usb cable while flashing with Odine, then, worse I closed odin and the phone went into emergency recovery mode. I tryed to use Smart Swithc to revoer it but it daoes not connect with th W10 Pc. The only thing I can do is to switch off using power and volume down but then it restart atutomatically and shws the emergency recovery screen. I have tryed all te uttons combinations found on the web, but the stubborn piece od hardware does not hear me, Is there someone that cne help me? I am close to use a hammer...
Hey there, when the phone is in emergency recovery mode, does it show up in Odin? If yes, you can try flashing the firmware again. It should work.
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
enzo-ita said:
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
Click to expand...
Click to collapse
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
RVR said:
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
enzo-ita said:
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
Click to expand...
Click to collapse
Happy to hear that!