Hey guys, I must reset my phone.
And now I have problem to activate the developer mode. I tip on the top blank in the info option an nothing happens.
Have someone the same problem?
In 4.4 you must go to setting versión and click several times to activate developper mode
Regards
Yes i know. But with the last version from Android Auto 4.4.592344 this not work.
I have the same versión, click setting , next click versión , you obtain a list of your official and custom apps, click the list seversl times and one pop up appairs when you can anable developper mode.
Thank You. That works.
Sub
Related
Hi everybody,
I need help about the system ui tuner.
I try to do like in the videohttps://youtu.be/B-aCDnCmIGs,
but it doesn't work.
I explain my problem on this thread, and I follow the instruction of Philip.
I'm in stock android M 6.0 and I enable the developper mode. And that's It .
Like I say on this post : http://forum.xda-developers.com/nexus-6/themes-apps/modpack-mcr-modpack-nexus-6-r1-t2996168/page93
I hold more than 10 sec the gear icon. And nothing happend. I have no small icon to the right of your setting (gear) icon.
You can see the screenshot in attachement.
Thank's for your help. And sorry for my english, I'm French
Disable developer options and try again. That worked for me.
Press and hold for a few seconds then release. Might take several tries. Took me several attempts before unlocking it on my N7.
Face_Plant said:
Disable developer options and try again. That worked for me.
Click to expand...
Click to collapse
Thanks ! It works.
Hello everyone.. i want to force switch on LTE mode on my device to use 4g internet and sim. I know it will not convert device to 4g.
But to that i have to open engineering mode. U have tried mtk engineering app and ussd codes *#*#197328640#*#*
But unable to open the menu. App says "can not find engineer mode app"
I have followed the following steps http://flipshope.com/blog/how-to-use-reliance-jio-4g-sim-in-3g-phone/
*#*#4636#*#*
You will find it in phone information
Ohkey.. is it the same thing?
Also if i want to explore additional options as in service menu like changing volume etc. Can I do that too???
Thanks for reply i found that option will check if it works...
piyush4542 said:
Ohkey.. is it the same thing?
Also if i want to explore additional options as in service menu like changing volume etc. Can I do that too???
Thanks for reply i found that option will check if it works...
Click to expand...
Click to collapse
Heyy,
Is your jio sim working after doing this trick. I dont have a jio sim so i cant try it . please reply...
piyush4542 said:
Ohkey.. is it the same thing?
Also if i want to explore additional options as in service menu like changing volume etc. Can I do that too???
Thanks for reply i found that option will check if it works...
Click to expand...
Click to collapse
You can't. There's no Engineer Mode in Android One.
Thanks for telling... i was searching for it for long that by any mean it works while its not possible... lol
Alas my jio sim is not yet activated waiting to check
Thanks for telling... i was searching for it for long that by any mean it works while its not possible... lol
Alas my jio sim is not yet activated waiting to check
does it works
correct
joeyhuab said:
You can't. There's no Engineer Mode in Android One.
Click to expand...
Click to collapse
Yes right bro I also tried to entre engineering mode several times but, didn't succeeded and found that theres no mode like this in Android one.
Try *#*#4636#*#*
its helps
thank you very much
It will not work in android one devices tried lots of methods bt none of them helped me .
Not working!!!
On Nexus 5 Lineage os 15.1
Lineage Oreo ROM 8.0.1
In my MI_A2 it only shows me information of SIM1 .. I need to make some adjustments in SIM2 .. thanks!
stupid man
You can also try this one *#*#3646633#*#*...
Pls my Mtk is not entering engineer mode
Hello XDA, I hope that you could help me troubleshoot my Note 8 (N950F).
So it's been 7 days and oem unlock toggle has finally appeared.. The only issue is it is greyed out and unselectable.
When I got this device I wasn't able to see developer options by pressing build number (though I got the notification that it was enabled), I was only able to access the setting by downloading an app short cut for it via the play store and on initial launch it said developer options are disabled. But then second launch it worked. Idk if this is significant but maybe the country this is meant for disabled it? Regardless of the sim card being in/out the phone, it is still greyed out. Also, I was able to factory reset the phone through the settings after downloading an OTA (I did this in hopes of developer options being enabled about a week ago.)
I tried to boot into download mode but it seems I can't boot into it (following the steps only lead to a normal reboot, and when I select that option from the stock recovery or through adb, it only boots the phone up normally. I purchased the phone off of swappa, in brand new/like new condition. Any ideas? Thank you for your help.
Edit: added screenshots.
SM-N950F / DS here running Taiwan software BRI and I have the option maybe if you flash this firmware you'll get it.
Eddygraphic said:
SM-N950F / DS here running Taiwan software BRI and I have the option maybe if you flash this firmware you'll get it.
Click to expand...
Click to collapse
Thanks for the answer! However, I don't think I can flash firmware because I can not go into download mode, which is needed for odin to flash firmware
Negroid said:
Thanks for the answer! However, I don't think I can flash firmware because I can not go into download mode, which is needed for odin to flash firmware
Click to expand...
Click to collapse
That's weird I've never seen a Galaxy that can't enter download mode.
Eddygraphic said:
That's weird I've never seen a Galaxy that can't enter download mode.
Click to expand...
Click to collapse
Exactly. That's why I'm so concerned.
Have you logout your Samsung Account and Google account？sorry for my poor English.:crying:
Do you use any of the KNOX stuff? Did you do any factory reset?
Can you "clear data" on "settings" app? this would make the "developer option" menu hidden again. Then re-show it by tapping build number numerous time again. Hoping that OEM is now editable.
Hi, could you solve this problem? My Note 8 has the same problem and I have not found any solution :llorando:.
I would appreciate it if you can help me.
Hello guys , so i have a very big problem, i have a moto nexus 6 with andriod 7.1.1 october security patch , my phone is locked with google account, its not rooted and on fastboot it shows device is locked , code status 2 , i can bypass google account to open the settings but I cannot open the developer options to enable the usb Debugging mode , so in conclusion devices is locked , non rooted , google account, usb Debugging is not enabled, so how can i fix the problem and I really need to remove the google account so please help me
Just to clarify,
You went into 'About Phone' and tapped on it several times to enable developer options?
spastico said:
Just to clarify,
You went into 'About Phone' and tapped on it several times to enable developer options?
Click to expand...
Click to collapse
Yes but i can’t enable it at all because i am bypassing the google account so its not available i need to enable it in another way which I don’t know about
Know the username and password. That is the only way to get to Developer Options to enable OEM unlocking.
Are there anyone update to 15.2.3 ? Could you please kindly share status, bugs . Thank you in advance.
I update my phone, all works smoothly.
nufc37 said:
Are there anyone update to 15.2.3 ? Could you please kindly share status, bugs . Thank you in advance.
Click to expand...
Click to collapse
Works fine, but the notifications has a long delay to income. Whatsapp if i get out of my phone, and when i comeback the messages come just if i open the app, ridiculous.
PS: the apps not stay in battery saver restritions and stay with autostart.
vinassif said:
Works fine, but the notifications has a long delay to income. Whatsapp if i get out of my phone, and when i comeback the messages come just if i open the app, ridiculous.
PS: the apps not stay in battery saver restritions and stay with autostart.
Click to expand...
Click to collapse
Hi vinassif, I have not updated yet. But for the problem of notifications you can follow this link. ( Please use Google translate https://m.mobile01.com/topicdetail.php?f=634&t=6382075&p=1 ) it works for me but have to locked recent Apps also.
nufc37 said:
Hi vinassif, I have not updated yet. But for the problem of notifications you can follow this link. ( Please use Google translate https://m.mobile01.com/topicdetail.php?f=634&t=6382075&p=1 ) it works for me but have to locked recent Apps also.
Click to expand...
Click to collapse
tks a lot but i dont understood also with translate, can you help me about this ? what can i do to resolve this ? have anyone else site to help me ?
vinassif said:
tks a lot but i dont understood also with translate, can you help me about this ? what can i do to resolve this ? have anyone else site to help me ?
Click to expand...
Click to collapse
Hi vinassif,
First of all you have to download One-click toolkit V2 from link in that site by PC. And then follow this step.
1. Enable ADB debugging mode
Steps:
Settings-My device-All specifications
and click MIUI version seven times. Then go
to
Settings-More settings-Developer options.
Turn on "USB Debugging" and "USB Debugging (Security Settings)" to
connect the phone computer
phone will appear "allow USB debugging it?"
select "OK"
2.
after extracting One-click toolkit
connect a phone
to perform "a key to execute disable power and performance" .
3. On mobile.
In the recent apps view, long tap the thumbnail of the app you want to lock, and then tap the Lock button.
Hope this will help you.
nufc37 said:
Hi vinassif,
First of all you have to download One-click toolkit V2 from link in that site by PC. And then follow this step.
1. Enable ADB debugging mode
Steps:
Settings-My device-All specifications
and click MIUI version seven times. Then go
to
Settings-More settings-Developer options.
Turn on "USB Debugging" and "USB Debugging (Security Settings)" to
connect the phone computer
phone will appear "allow USB debugging it?"
select "OK"
2.
after extracting One-click toolkit
connect a phone
to perform "a key to execute disable power and performance" .
3. On mobile.
In the recent apps view, long tap the thumbnail of the app you want to lock, and then tap the Lock button.
Hope this will help you.
Click to expand...
Click to collapse
Tks a lot my friend. I will try this but i didnt find the link to download the one tool kit v2 in that site. Do you have the link? TKS
vinassif said:
Tks a lot my friend. I will try this but i didnt find the link to download the one tool kit v2 in that site. Do you have the link? TKS
Click to expand...
Click to collapse
前往外部連結 - Mobile01 - Mobile01
「全球華人最注目的社群網站是哪個？」這問題的答案非常簡單，就是Mobile01！
m.mobile01.com
一鍵執行啟停用省電與性能V3.zip
drive.google.com
nufc37 said:
前往外部連結 - Mobile01 - Mobile01
「全球華人最注目的社群網站是哪個？」這問題的答案非常簡單，就是Mobile01！
m.mobile01.com
Click to expand...
Click to collapse
good, tks one more time for help me