Where can I get LG uptool for V409N and
how to enter recovery mode and fastboot mode on these phone.
Please help me.
The official, updated LGup tool isn't out yet. As for fastboo/recovery, not off the top of my head. I usually look that stuff up as-needed.
Sent from my LM-V405 using Tapatalk
Related
Hi,
I want to update firmware downloaded from LG using the KDZ Updater (No, not smartflash because I can't get those 1N1_Internet_AG Branding file for it). HowTo here. My question before bricking the phone is, which type do I have to set in KDZ_FW_UPD.exe for Optimus 2x?
Thank you,
d.
dieterhaack said:
Hi,
I want to update firmware downloaded from LG using the KDZ Updater (No, not smartflash because I can't get those 1N1_Internet_AG Branding file for it). HowTo here. My question before bricking the phone is, which type do I have to set in KDZ_FW_UPD.exe for Optimus 2x?
Thank you,
Click to expand...
Click to collapse
dragon-tmd said:
If you like to update your P990 with the official kdz, just follow this
http://android.modaco.com/content-p...imus-black-clockworkmod/page/20/#entry1708746
instructions (of course with the V10C_00.kdz for the P990), but recovery mode on P990 is started by pressing Volume down
Click to expand...
Click to collapse
Don't forget to install the msi file in the KDZ updater folder and you are good to go. You might have to do a factory reset (power on + volume down) if you are stuck in a boot loop.
Thank you, both dragon-tmd and bedevil99.
MoDaCo did some renovation work. The new link seems to be here.
The other instructions I've read first did not mention that it's necessary to change phone settings to USB-Debugging and to boot into S/W Upgrade Mode - and I'm on XP Pro SP3. Settings KDZ_FW_UPD.exe Type: CDMA, Phone Mode: DIAG.
Flashing worked using these settings.
d.
Hi
A friend of my messed up his droid 4. He updated to ICS but something went wrong and the phone is dead. After that he put somes sbf that he didnt remember.
The phone when come to me had the screen in Fastboot Failure. I put the VRZ_XT894_6.7.2-180_DR4-16_M2-37_1FF with the ICS Tool and with RSD and i fix that error but the phone stuck in black screen after the motorola logo.
I think that the phone inside has some files of the last update 217. I tried to install the update trought the stock recovery but didnt let me.
I tried to open the system.img of the 180 putting the files of the 217 but when i flashed gives me errors and stucked in fastboot failure.
Is there a way to put the latest updates files on the sbf 180? I can flash only trought rsd or fastboot.
Sorry for my bad english.
Try to flash in fastboot mode full stock 4.0.4 using rsd lite, then go again to fastboot mode, do fastboot -w command and let us know
Sent from my XT894 using xda premium
olegfusion said:
Try to flash in fastboot mode full stock 4.0.4 using rsd lite, then go again to fastboot mode, do fastboot -w command and let us know
Sent from my XT894 using xda premium
Click to expand...
Click to collapse
I did it but it is the same error. Black screen after motorola logo. I think that the phone is totally bricked.
Have you tried wiping data?? I had a similar issue for a while, it turned out it was mismatching settings or something.
Sent from my ASUS Transformer Pad TF700T using xda premium
moah909 said:
Have you tried wiping data?? I had a similar issue for a while, it turned out it was mismatching settings or something.
Sent from my ASUS Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse
I tried that but no luck.
any fix? im in the same boat. black screen after moto logo
Hmm I dont believe its a hard brick but just a soft brick caused by flashing the wrong sbf which left you in this state
Try downloading the sbf tool
http://www.droidforums.net/forum/droid-4-hacks/217255-droid-4-utility-ics-only.html
FOLLOW THE DIRECTIONS AS YOU WILL HAVE TO DOWNLOAD THE PROPER SBF AND PLACE THE FILES IN THE TOOL
6 months later the Droid 4 is ALIVE!!!
I flash to jellybean with this utility:
http://forum.xda-developers.com/showthread.php?t=2207384
Thanks
So first. I was trying to flash TWRP with AutoRec and when I rebooted I got a message saying fastboot mode started. I couldn't access anything else. I read around and managed to get download mode back but I cannot flash the kdz with the flash tool because the phone is not detected by the computer while in download mode. This is the Verizon variant g2 (vs980).
Sent from my SGH-T889 using Tapatalk
for reference I am using windows 10 home x64
I saw quarx had a cm13 build for the l90 so i downloaded it, flashed it and whatnot. it didn't detect the sim card... okay no problem, i'll just reboot to recovery and reflash cm12.1. I was wrong, it wiped out twrp and installed the stock recovery. Not a single driver I try works, fastboot just loves toying with me. no matter what command i do, (unless it doesn't affect the device) fails with
"Failed (remote: unknown command)"
I zeroed out my laf to enable fastboot, but cant fix that without fastboot accepting commands.
And to top it all off, the phone no longer boots to anything but fastboot... Reeeeal [email protected]#ing convenient
please help..
What L90 model (variant)?
Download mode isn't available either? If you can't enter download mode, I think there are some commands for d405 and/or d415 that allows you to load fastboot img locally using adb. Or you can try the hardbrick unbrick tutorial (needs disassembling the phone).
Happy New Year!
Sent from my LG-D410 using XDA Free mobile app
Same boat
Hey, I am in the exact same boat.
Phone: LG D405n
OS: CM12.1
I had CM12.1 installed, TWRP Recovery, and V20a unlocked bootloader .
I installed Xposed and now Cyanogenmod just is stuck in a boot loop and cant get to recovery either.
I cant even flash the original software since my PC gets a blue screen as I install the LG Driver. Error is lgnetandmodem.sys or something.
If I uninstall the driver the phone can connect to the PC but then LGMobileSupport Tool doesnt detect it.
What on earth do I do?!
Re-installing the latest drivers should fix the BSD on Windows, or you can try flashing kdz using another operational system or computer.
Sent from my LG-D410 using XDA Free mobile app
lfom said:
What L90 model (variant)?
Download mode isn't available either? If you can't enter download mode, I think there are some commands for d405 and/or d415 that allows you to load fastboot img locally using adb. Or you can try the hardbrick unbrick tutorial (needs disassembling the phone).
Happy New Year!
Sent from my LG-D410 using XDA Free mobile app
Click to expand...
Click to collapse
Its a d415, could you link me to those so called commands please?
Im having the same issue after following Lady Vengeance's bootloader unlock tutorial
---------- Post added at 02:45 AM ---------- Previous post was at 02:40 AM ----------
@LaDY Vengeance
Just a heads-up. Upon attempting to fix with the softbrick tutorial I found, my device refused to accept any kind of commands. I gave up. Others may be in different circumstances and may be able to fix it using said tutorial
My g4 is in a state of half alive half dead.
I explained in another post my issue.
Seemingly people say lg up tool is now the only method Unlike the old flash tool method to unbrick or kdz stock is this Only cause of 6.0 firmware?
When i plug in phone to pc in download mode Lg up tool shows device model as unknown. And says please select a device model which theres no butons to do that.
Lg flash tool 2014 won't flash 20i kdz it errors out connection upon extracting kdz software at around 80% Even leting it sit don't work like people say to do
Ive tried 10n kdz also that says software upgrade in progress fails at 9% then says unplug phone from pc and retry.
There is no Com in the download mode screen at any point.
All i did by mistake was fastboot oem relock bootloader Whilw rooted and on micromods Rom ONLY cause i wasnt sure if that' was the cause of the failed Flash tool errors. Now i have secure boot error 1003. Now I knew that was a No no with Nexus phones but i suspected Lg kdz over writes all that stuff.
Theres gotta be a way with one of the 2 tools Or a way to adb re unlock the bootloader and maybe salvage my Underlying twrp recovery and O.S
ANY HELP HELPS
Sent from my LGMS631 using XDA Free mobile app