Database Develop

open touch 2.4 and bluetooth profile problem (resolved)

I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.

I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.

beowolf said:
I have the same problem, and it effects the ability for me to use MS Voice Command. I wish someone would help, but I made a post about this and got no replies.
Click to expand...
Click to collapse
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?

hoolahoous said:
I installed open touch 2.4 and LOVE IT.. it makes windows mobile so much useful..
one thing i found problamatic was the bluetooth profile. The problem is when I press the call button on my bluetooth headset it doesn't trigger the voice speed dial. It just launches the dialler which shows the keypad.
That kind of defeats the purpose of 'hands free' if I need to press the voice speed dial on the phone and then use the headset.
Any solution ? Or any other package I can install to get the full functionality of voice speed dial with bluetooth.
Click to expand...
Click to collapse
Just to cover all basis, did you setup the button 5 options?
Remember that I left the 5th button free for people to choose either voice record or voice speed dial.
Going forward, please do not create new post, instead post your issues in the original thread.
Thanks,

I'm pretty sure that what your dealing with is a registry problem. When i switched to touchit 2.3 i had to reconfig to the following:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Try it and let me know how it goes. I dont get credit for this it is from a previous post. This did work for me tho. I can prompt the voice speed dial from the bluetooth.

ttran001 said:
guys,
I'm working on v2.5 and will try to resolve this issue if possible.
I need more details as to what is happening.
Also,
I did not see any of this nature posted in the original v2.2 post.
Who else is having this issue?
Click to expand...
Click to collapse
Thanks ttran for responding. I have great respect for you for putting together this great ROM.
The issue is..
I am pairing my bluetooth headset (motorola h850) with the phone. After paring, if I press the call button on my bluetooth, it is supposed to invoke the voice dial app in the phone and call the voice tag I spoke. However it just brings the phone dialler screen and does nothing.
My diagnosis
For an incoming call (when paired), I can pickup the call using bluetooth headphone's button. So I know bluetooth instrument is working.
Secondly when I directly invoke voice speed dial from phone (i mapped a hardware button to voice speed dial) it works fine too.
Only problem is I can not invoke voice speed dial from bluetooth headset.
Do not confuse this issue with the hardware button mapping since I am trying to invoke voice speed dial from bluetooth headset (not from hardware button on phone. that works fine)
Please let me know if you need any futher information. I will happy to provide any additional details.
BTW thanks again for putting together such a great ROM.

Hi,
Thanks for clearing that up.
Please try what mrmikemcguire posted:
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
And let us know if it works for you, I don't use blue tooth so I can not test it for you.
Also,
Let me know if it fixes your issue so that I can add it to the next release.
Thanks folks,

sorry didn't work for me..

Ok.... First, thank you mrmikemiguire . Now hoolahoous .. did we make progress? The Audio gateway should be opening now... Verify that the registry modifications are correct in your device, then power cycle..... there may be another piece to the puzzle but those changes should work.
Edit: Final piece... Verify HKLM,"SOFTWARE\OEM\VoiceCommand "Path" = \Windows\SDDialer.exe

Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.

hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Hi,
That reg fix has been added to v2.5 and yes Voice speed dial is included but not voice command since it takes about 4mb of space.

hoolahoous said:
Okay.. thanks for everyone's help.. I finally got it to work... One thing incorrect in above settings was
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
the default entry was VCBTHAG.DLL not OEMAGEX.dll , I missed that..
however when I changed VCBTHAG.DLL to BTAGExtModule.dll , it started working..
ttran001, maybe you can include these entries in 2.5.
I know you are not planning to include voice speed dial or voice command in 2.5, I personally feel that you should include atleast one of them. My vote would be voice speed dial since it works for everyone but voice command works only for subset of people. When I say work, I mean software being able to recognize what a person is saying.
but thanks to everyone including mrmikemcguire to get it to work for me.
Click to expand...
Click to collapse
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.

mrmikemcguire said:
Yep sorry about that.. I realized that when i did it, same occurance, but forgot to mention it! Sorry about that, but at least you got it squared away. Glad I could at least point you in the right direction.
Click to expand...
Click to collapse
Either way thanks for providing feed back so to help resolve this issue.

I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!

#13 said:
I am using 2.5 slim and cannot get audio from realplayer, skype, etc.
I push the button and all I get is some wrong application, try again later errors....
Please help.
It all worked perfectly with the Clean ROM so may be someone with know-how can look at the registry differences between them and tell me if this is fixable, or i have to install the clean again...
Thank You!
Click to expand...
Click to collapse
Is this with bluetooth or the actual headset, or headphones?
And is anybody else having this issue?

Yes, BT.
Sorry i didn't mention this important detail.

Enabling Phone Book Access Profile (PBAP) on ATT Tilt

How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..

I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO

TDO said:
I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO
Click to expand...
Click to collapse
I've done some research on this and I beleive that is the only app that works.

Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!

abhiku said:
Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!
Click to expand...
Click to collapse
I'm not sure I understand your question??????

MorKaiser said:
I'm not sure I understand your question??????
Click to expand...
Click to collapse
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"

abhiku said:
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"
Click to expand...
Click to collapse
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...

MorKaiser said:
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...
Click to expand...
Click to collapse
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.

abhiku said:
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.
Click to expand...
Click to collapse
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!

Success
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.

rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
Are your entries on your sim card (just the phone number) or in the main phonebook memory (can you see the whole contact info including address and multiple phone numbers)? The reason I ask is the impression I had is the contacts sent over could only be the simple kind with just the name and 1 number.
I hope you have the numbers in main phonebook memory as I would love to get this working in my TL.
Also, did you use the jetware software? If so, would you mind letting us know in detail what you did as I'm still unsucessful.

Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.

jontelfer said:
Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.
Click to expand...
Click to collapse
SAP settings would only enable you to access phonebook enterys that are on the sim card. I want to be able to get the actual outlook contacts. Just wondering if that is possible.

Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.

I have a Verizon XV6800 and a Acura TL and I have been trying to figure this out also. I have tried using the Jetware program but didnt get any where with it.
Please, if you figure this out PM me or shot me a email at [email protected] and let me know how you did it.
Thanks
Bud
abhiku said:
How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..
Click to expand...
Click to collapse

Hi
Did you use the jetware program? Did you some how set the nav on your MDX in some kind of "phonebook transfer mode"? If so what did you do on the Acura Nav to do this?
Thanks
Bud
jontelfer said:
Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.
Click to expand...
Click to collapse

I tried again today both with and without the Jetware bluetooth extension. Tried multiple settings... no luck. Everytime I press phonebook import, it says the currently linked phone does not support this function. Any one with any suggestions?
(I have the AT&T Tilt and a 2007 Acura TL with Nav)

Do you have SAPSettings in settings->system?
If not, maybe find a cab for it and give it a go. Sounds like you've hit a brick wall anyway.
Aside from that maybe it's a difference at the car end. Mine is a SEAT (don't think they're sold in the US but think VW) and works out of the box.
Jon

help me out
rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
I have acura TL nav. I was unable to import phonebook from my sprint touch to TL.
can you tell me how you did on MDX?
thanks
nianmo

MorKaiser said:
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!
Click to expand...
Click to collapse
I have a Pioneer deck as well and I have been looking for a way to do this. I didn't think it was possible. Should have known better! Going to try it out later tonight!

[Q] Microsoft Voice Command on TyTN II

I installed the above OK, and did the settings, but still can't get it to work...can any kind soul advise on how to set it up, plz? I'm using Windows 6.5...thank you!

engager said:
I installed the above OK, and did the settings, but still can't get it to work...can any kind soul advise on how to set it up, plz? I'm using Windows 6.5...thank you!
Click to expand...
Click to collapse
try you check in http://forum.xda-developers.com/showthread.php?t=434977
I think you'll find the answer there

thank you dear friend for your response...will now check out that thread! Do you have this device?

engager said:
thank you dear friend for your response...will now check out that thread! Do you have this device?
Click to expand...
Click to collapse
yes, so what ..?

What's it not doing? Not announcing?
I played around with mine and eventually got it to work. For example I unchecked the "high priority only" on the message alert and got that to finally work. Not sure what constitutes a "high priority" other than any message from my wife, lol!

@RatRedux, thanks for your response! I just can't assign it to a button, also, I've the American version, and it can't really understand my British accent in most commands...how did you assign a button?

managed to remap the registry key as follows:
# Goto HKLM\Software\ Microsoft\Shell\Keys
* - Click Open Key named "40C6"
* - Change the 'Default' string name to "\Windows\Voice Command.lnk"
* - Now change the 'ResetCmd' string name to "\Windows\Voice Command.lnk"
Now close Registry, and go back to device and click the button on the top left side which is indicated by the 'Speak' Icon, and it should now work for you!

engager said:
@RatRedux, thanks for your response! I just can't assign it to a button, also, I've the American version, and it can't really understand my British accent in most commands...how did you assign a button?
Click to expand...
Click to collapse
I only ever used voice commands with my bluetooth headset so I never bothered to set a button on the phone. It works most of the time but it doesn't help that my wife and neice and daughter and sister in law have similar sounding names so it occasionally wants to dial the wrong relative lol! I turned off the announce incoming calls since my Blueant T1 has it's own built in voice caller ID. Though I must admit the lady who lives inside my phone sounds a bit nicer than the lady inside the bluetooth!
We haven't figured out how to set up Google voice in my wife's Android phone so I must give my old "brick" (as my wife calls it) a nod since it worked right away even on my old junk headset.

[Q] Does the GNote support AVRCP 1.3+ ?

It is all in the title, wondering if the GNote supports AVRCP 1.3 or 1.4 or not yet.
I know that BlueZ BT now supports it.

a small bump maybe

It seems,, according to official specs page, YEP it support AVRCP 1.3...
http://www.samsung.com/tr/consumer/...dex.idx?pagetype=prd_detail&tab=specification

Oh thanks ! i had missed that !
If this is true that my MW600 should be able to display the name of the caller not only the caller Number (as well as the track name)
Can't wait to test that.

ArcticCat said:
Oh thanks ! i had missed that !
If this is true that my MW600 should be able to display the name of the caller not only the caller Number (as well as the track name)
Can't wait to test that.
Click to expand...
Click to collapse
Please do post the test result.
I am planning to get mw600.

will receive my Note by the end of the week will test and get back to you (unless another member chimes in before that )

The built in player shows the track name. However I only see the incoming phone no on the receiver.
The audio sounds better with Samsung player compared to third party ones. But the Samsung player disregards track numbers in metadata.
The battery life for the receiver is good but if you don't already have it and thinking to get one, consider the following drawbacks:
volume level control is terrible.
Call button is also not placed in a proper location so you press it easily by mistake.
Also audio quality is nothing to write home about.
Sent from my GT-N7000 using XDA App

Got my note today, in my opinion mw600 works great with it.
Although I do agree.about the audio rocker for me the sound ha very good

can anyone put a light on any bt headset which shows caller names instead of numbers? for note

prophet_in said:
can anyone put a light on any bt headset which shows caller names instead of numbers? for note
Click to expand...
Click to collapse
It does not shows the Caller name just shows the Caller number

I think it's not the Galaxy Note but Android. As far as I know Android doesn't support AVRCP 1.3 (that's why you don't see caller ID, only number).

Moved To Q&A​

Trip computer showing only L per 100Km - No way to change it?

Is this locked to the canbus adapter? Im using an PSA for Citroen and Peugeout that for what I gathered is the only one you can find for those cars.
My stock canbus with stock head unit shows the fuel consumption as KM/L but on the android headunit with the new canbus I get L per 100Km.
Sure I can just convert with a calculator but is there no way to change this? or some app that can show in a different format?
Thanks!

Pacote-san said:
Is this locked to the canbus adapter? Im using an PSA for Citroen and Peugeout that for what I gathered is the only one you can find for those cars.
My stock canbus with stock head unit shows the fuel consumption as KM/L but on the android headunit with the new canbus I get L per 100Km.
Sure I can just convert with a calculator but is there no way to change this? or some app that can show in a different format?
Thanks!
Click to expand...
Click to collapse
Hello, I have the exact opposite problem! I would like to get L/100KM but I only have KM/L with my PX6 4/64 head unit right now. I have a Toyota Rav4... Is it possible that it can be changed in CANBUS settings in factory settings menu?

Pacote-san said:
Is this locked to the canbus adapter? Im using an PSA for Citroen and Peugeout that for what I gathered is the only one you can find for those cars.
My stock canbus with stock head unit shows the fuel consumption as KM/L but on the android headunit with the new canbus I get L per 100Km.
Sure I can just convert with a calculator but is there no way to change this? or some app that can show in a different format?
Thanks!
Click to expand...
Click to collapse
I have L/100km and have settings button near in upper corner.
I was wondering what code it is to get inside and change settings. It asks code like 8888 or 12334 I dont know which is it ...

Are any of these units MTCB. How do you know you're all talking about the same unit?

marchnz said:
Are any of these units MTCB. How do you know you're all talking about the same unit?
Click to expand...
Click to collapse
Please consult with your seller for firmware and model, then go in MTC - B D E folders and find a match for your device