Related
Hi guys!
May I know if anybody here experienced black screen ? Screen has no image to display. Backlight is working, Led light is working when charging, fingerprint vibrates as well when A2 is turned on. I have tried replacing LCD display but black screen persists. What do you think is the problem?
Sent from my Mi 9 SE using Tapatalk
I have the same problem!!!! I try flash rom again but it persists
Yesterday it happened to me also.
The phone is working, the touch is working, but the lcd is black.
I even managed to recieve a call. Tried to restart the phone but its still black screen with working touch.
I can't find any solution...
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
RiFeee said:
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
Click to expand...
Click to collapse
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
KevMetal said:
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
Click to expand...
Click to collapse
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
RiFeee said:
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
Click to expand...
Click to collapse
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
KevMetal said:
because you are trying to downgrade
Click to expand...
Click to collapse
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
RiFeee said:
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
Click to expand...
Click to collapse
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
KevMetal said:
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
Click to expand...
Click to collapse
KevMetal said:
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
Click to expand...
Click to collapse
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
RiFeee said:
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
Click to expand...
Click to collapse
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
KevMetal said:
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
Click to expand...
Click to collapse
I already did, tried all the tutorials from 2018 to last month. The phone bootloader is locked and for some reason I can't unlock it, tried a dozen of different approaches, recovery's, flashings, ADB and everything.
Always ends in two ways, black screen with back light on (some sounds work and keeps in the lock login screen) or dead stuck in permanent EDL mode.
My phone still not working. Maybe its because of the busted display IC.
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
This is why you have to be extra careful while flashing something.. hope you find a solution
kalebwinefield said:
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Can you access fastboot mode? If so, you can try unlocking the bootloader again and installing the rom you want. If you haven't removed the mi account it will unlock and you don't even have to wait the required time again.
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
kalebwinefield said:
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
Click to expand...
Click to collapse
Download the latest fastboot firmware (MIUI 11) for your mi cc9 (not mi 9 lite). Don't grab the recovery.zip firmware, it's useless and will give you errors.
When you finish your download, unpack your .tar firmware twice and flash it with MiFlashTool while you are on fastboot mode. (Power/Vol-).
Next time, ask before flashing not after !
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
stinkyllamaXDA1 said:
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
Click to expand...
Click to collapse
What kind of firmware are you trying to flash trough MiFlash ? recovery.zip or fastboot ? Can you take screenshots so people can know what is your issue ? Without screenshot no one will help you here !
Cheers
I also same situation, does anyone know a good idea?
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
irum94 said:
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
Click to expand...
Click to collapse
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write ?
Stefke93 said:
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write
Click to expand...
Click to collapse
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
irum94 said:
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
Click to expand...
Click to collapse
No until someone patch firehose for sdm710 ?
Mi 9 lite
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
This guy helped me. He uses ultraviewer.net for remote connection. 1722 rubles for flashing.
MOD EDIT: Phone Number Removed
Le: how did you bricked it? I restored an older backup of android 9 over Android 10 from twrp. But from what I understand cc9 doesn't have rollback protection.
Le2: you can also try those fishy 710 firehose no Auth loaders you can find from various sources. Didn't worked for me but you can try.
If you flash Revolution OS or flash Android 9 over Android 10 rom you have good chance to hard brick device so you need to flash first fastboot rom if you want to go from 10 to 9
Thanks
friend @editheraven thank you very much for the contact, I spoke and yesterday I could flash my MI 9 lite I really appreciate it, thank you bro.
loc182 said:
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
Click to expand...
Click to collapse
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
chainorth said:
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
Click to expand...
Click to collapse
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
editheraven said:
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
Click to expand...
Click to collapse
it can't boot to fastboot or recovery mode.
chainorth said:
it can't boot to fastboot or recovery mode.
Click to expand...
Click to collapse
And no recovery? Only the splash screen?
editheraven said:
And no recovery? Only the splash screen?
Click to expand...
Click to collapse
yes .Mi logo 2 sec then screen off
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.
Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother
LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide
skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.
I want to flash stock rom with miflash, when i tried to flash it stuck on black screen and turns into edl, i tried to flash again and no use ( needs mi account authorization) and bricked, i need firehose without auth to unlock it please help.
Edit: I Just Created Firehose file for it without authentication.
Enjoy..
Hi. How did you created that file and what rom did you used ? How it will bypass mi account authorization ? Thanks.
Thx it works for Poco M3
Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode
furiousjay said:
Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode
Click to expand...
Click to collapse
Hi were you able to get rid of edl and start ur phone?
I am really very happy for your contribution, you just made a 16 year old boy so happy that he was even inspired to learn much more about software
Hey ! good to know you were able to patch it
I am also stuck in edl mode (Redmi 7 - onclite) .. can't find any way out ..//
Can you do a favour to me an patch my device firehorse too ..
Did not work 100% for me.
The latest global rom flashed without asking for authorized account so that's good but my redmi 9t stays in edl mode
Thanks for sharing though.
wamy007 said:
Did not work 100% for me.
The latest global rom flashed without asking for authorized account so that's good but my redmi 9t stays in edl mode
Thanks for sharing thoug
hold power button for 10s and it will exit on its own
Click to expand...
Click to collapse
@aryankaran Tried it already, did not work.
Phone tays in edl mode.
Update: when the battery is completely empty i can charge the phone and it seems to work but...
after i restart the device it's stuck again in edl mode.
I let the battery drain for 2 times now and it's 2 times the same outcome.
wamy007 said:
Update: when the battery is completely empty i can charge the phone and it seems to work but...
after i restart the device it's stuck again in edl mode.
I let the battery drain for 2 times now and it's 2 times the same outcome.
Click to expand...
Click to collapse
reflash different rom some partitions might got messed up / corrupted .. try
Redmi 9T Global work fine, it just doesn't automatically switch from edl mode, you need to hold the power button until it starts.
Hi
Plz help me
My phone is redmi 9t and i flash the poco m3 rom not by mi flash and my phone after the flash is breck.
I try very rom to edl mod but is erorr mi flash tools
I trying eng rom and flash complete but screen black and phone is edl mod again
Sory for bad english writing
The erorr is the picture
aryankaran said:
Hey ! good to know you were able to patch it
I am also stuck in edl mode (Redmi 7 - onclite) .. can't find any way out ..//
Can you do a favour to me an patch my device firehorse too ..
Click to expand...
Click to collapse
Please PM me.
furiousjay said:
Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode
Click to expand...
Click to collapse
YOUR PHONE STILL STUCK ON EDL MODE?
Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator
damianekgalka said:
Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator
Click to expand...
Click to collapse
Same happened to me, follow this tutorials:
MTK Bypass Universal
This one is for unlock the bootloader:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Download the phone firmware from here:
https://c.mi.com/oc/miuidownload/detail?guide=2
you have flashed the china version (or a version for another devices, sure not camellian). cause global fastboot version is not yet online. only recovery. you can install only via ota or twrp.
damianekgalka said:
Today I wanted to upload Miui 13. I was uploading rom via MiFlashPro. After starting the phone's rom, it turns on all the time, displayed on the redmi logo, the moment at the beginning of the seconds bar, pixelated white after sharing, after three phones it restarts and from the beginning the redmi logo and the white bar pixel. the phone cannot be started in the mode recovery and fastboot. What can I do to save my phone? I am sorry for the mistakes, I use a translator
Click to expand...
Click to collapse
same problem you can fix it?
ctvaldess said:
same problem you can fix it?
Click to expand...
Click to collapse
best fix is use brain before flash a rom. try with miflash pro. mtk tool is included. if pc detect device into fastboot mode or recovery you shold be able to tefladh stock firmware. otherwise only solution is assistance service. cause phone must be open
you can enter Meta Mode and Flash with SP Flash Tool with Your Region Stock Firmware
shinobusensui said:
you can enter Meta Mode and Flash with SP Flash Tool with Your Region Stock Firmware
Click to expand...
Click to collapse
if phone can enter in fastboot mode, is not necessary enter in meta mode. and try to explain to a user that didn't understand how flash stock rom with miflash, what are meta mode sp flash tool, scatter file... is a mission impossible
wetito said:
if phone can enter in fastboot mode, is not necessary enter in meta mode. and try to explain to a user that didn't understand how flash stock rom with miflash, what are meta mode sp flash tool, scatter file... is a mission impossible
Click to expand...
Click to collapse
there are times where it does not work well or gives an error or the package if it is inferior does not let you flash in assistance / fastboot mode if the Boot is not unlocked, I accidentally ruined my redmi note 10 5g and they gave me Another to Play and I managed to know things nobody explains many things to you, that is if even deleting bricked the imei you can recover the second