I have 2 machines: Lenovo Thinkpad T490 and MacBook Pro 2018
Both has usb-c 3+
How can I use them to boot the xiaomi to fastboot?
I just wanted to play with the gCam and Camera2 API
Use the key combo? Vol Down + Pwr button
Related
I've had a mi 5 for about 2 months with a global (non-dev) ROM. Recently I successfully unlocked the bootloader with MiUnlock and then tried to install TWRP through adb and fastboot. The twrp.img flashed fine but then I held the power button to exit fastboot and now my phone is bricked. No charge light, display no nothing. I've tried the test points and disconnecting the battery and I've tried holding the PWR + VOL UP + VOL DOWN. The phone was on about 60% charge I think. Is my beloved mi 5 dead for good? Thanks in advance.
connect your phone on pc and see if there is any detection of port? in device manger.
i recommend you 4pda, there are some guides in which you can flash it via qfil if it goes to qualcomm usbloader mode, and
http://4pda.ru/forum/index.php?showtopic=732822&st=3680#entry51446873
and this
http://4pda.ru/forum/index.php?showtopic=732822&st=2520#entry50774359
search is your friend.
I have a moto X4 that after attempting FRP, the device was restarted, and after that it is in a loop, and no longer enters fastboot mode. What I've done: tested button, ok tested battery, ok What can I do now? only in the box to solve? if it is only in the box, umt solve?
Felipe9229 said:
I have a moto X4 that after attempting FRP, the device was restarted, and after that it is in a loop, and no longer enters fastboot mode. What I've done: tested button, ok tested battery, ok What can I do now? only in the box to solve? if it is only in the box, umt solve?
Click to expand...
Click to collapse
Hold volume down and power buttons until you see fastboot mode
Sent from my payton_sprout using XDA Labs
Hello Friend!! holding the power button and volume less, it did not enter fastboot at all. However, I held the Power button, volume less and connected it via the cable on the PC, so I managed to enter fastboot mode, and hard reset it, the device came back to life. thank you for the answer.
How to proceed? The 4xl pixel went out, the vibration goes on pressing, but there is no picture. I read it on the Internet, as if the firmware has flown, but it also does not enter the recovery and fastboot. Is it possible to restore such a device?
plug it into a computer. open device manager. if it says qdloader 9008, you are in EDL mode and need to use a firehose file and firmware to flash it. if nothing happens when you plug it in, you probably just need to look up and install qualcomm qdloader drivers.
Hey!
You are on the EDL mode(Emergency download mode). I don't why you get there, but the only way to go out is to press power bottom + volume bottom(not sure if was vol+ or vol-)
If you can't them you may need to reflah the firmware...
Have a look on my profile, i tried to use this method to unlock a carrier-locked bootloader from a Pixel 4XL.
Good luck!
for some time I can't start my redmi note 9 does not respond to button combinations for fastboot and recovery when I connect it to the computer I get that usb is not recognized can anyone help
Flash stock rom from EDL mode. Follow this guide
my redmi note 10 5g (unlocked) can't boot into fastboot, and when i boot the phone it says i need to press power button to continue because it's corrupted but power button doesn't do anything except the redmi powered by android screen appear for 3s
flash vbmeta.img, you can find it in the stock rom of miui
[STABLE/STOCK/GSI - Android 13] Redmi Note 10 5G (camellian) + Magisk (NO TWRP)
How to flash Google/Pixel Stock Stable Android 13 on Xiaomi Redmi Note 10 5G (in my case camellian) from any MIUI or any GSI rom without custom recoveries: Download stock (original/unmodified) boot.img from your current MIUI Version Download...
forum.xda-developers.com
commands are shown there
ThePhoneUser0 said:
[STABLE/STOCK/GSI - Android 13] Redmi Note 10 5G (camellian) + Magisk (NO TWRP)
How to flash Google/Pixel Stock Stable Android 13 on Xiaomi Redmi Note 10 5G (in my case camellian) from any MIUI or any GSI rom without custom recoveries: Download stock (original/unmodified) boot.img from your current MIUI Version Download...
forum.xda-developers.com
commands are shown there
Click to expand...
Click to collapse
ok but i can't access fastboot or recovery on my phone
pioucraft said:
ok but i can't access fastboot or recovery on my phone
Click to expand...
Click to collapse
even with power cable?
ThePhoneUser0 said:
even with power cable?
Click to expand...
Click to collapse
even with a power cable, connected to a computer or not, it don't seem to be working
pioucraft said:
even with a power cable, connected to a computer or not, it don't seem to be working
Click to expand...
Click to collapse
might be a full brick then
ThePhoneUser0 said:
might be a full brick then
Click to expand...
Click to collapse
ok i see, anyway thanks for the response
pioucraft said:
ok i see, anyway thanks for the response
Click to expand...
Click to collapse
np
Maybe your phone recovery, fastboot img damage.
You can try hold power button and v- together when see miui fastboot logo then release button
U had to use mtk client
Search into the forum, there's a guide for solve your problem