I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
zahidhasanzahid said:
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
thank you, you save my life!
miflash is suck, always failed to flash with it...
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
Thanks a lot for the clue. Never tried it before although saw it earlier.
It's really great tool. Much better than miFlash Tool and also the progress is visible in the log.
Cheers.
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
I didn't know that this tool used flash stock. I always use it for debloat.
Thanks for sharing.
zahidhasanzahid said:
I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Click to expand...
Click to collapse
Same thing is happening to me. I was trying to shift from Chinese ROM to Global in my Redmi Note AI. My phone turned on, already converted to Global, done Initial MIUI setup steps on the phone(selecting language, region, google account login...etc) but, in my PC MIFlashTool, it's still flashing, progress bar is green, no error is shown! should I unplug the USB and start using the phone as it is or re-flash using your Java tool?
why is my bootloader showing as locked even though i am on lineage. unable to use the jar for that reason.
alguém pode me ajudar? Eu coloquei meu celular pra instalar a rom, mas ele fica com o status em $pause. Gostaria de saber o que isso significa e se eu deveria esperar até algum resultado aparecer na tela.
Forum rules say posts must be in English.
This forum is for Mi 9T Pro / K20 Pro. Your screenshot shows you are flashing a Mi A3 ROM.
You are either posting in the wrong forum, or flashing the wrong ROM.
Related
as the title suggests I have a curious problem, after changing rom very often the security options don't go anymore, I can't set a password, a 'drawing' etc ... when I set it to have the ok but nothing changes. ... solutions?
Try wiping data.
The War Profiteer said:
Try wiping data.
Click to expand...
Click to collapse
I tried them all .....
install mini and stock gapps .. first and after the first boot .... I tried to overwrite the roms on the miui file system 9.6.20 without and with wipe .... I made wipes 200 times but nothing ... .with and without magisk ...... with the miui it goes as smooth as the butter with the aosp no ....
the problems arose after I tried to install the Open Source Illusion Project .... unfortunately, however, it gave me an error and I gave up ... I shredded and I restored everything and from that moment anything I install doesn't seem to work the fingerprint sensor ... only with the "miui" works correctly ...
pollopopo said:
I tried them all .....
install mini and stock gapps .. first and after the first boot .... I tried to overwrite the roms on the miui file system 9.6.20 without and with wipe .... I made wipes 200 times but nothing ... .with and without magisk ...... with the miui it goes as smooth as the butter with the aosp no ....
the problems arose after I tried to install the Open Source Illusion Project .... unfortunately, however, it gave me an error and I gave up ... I shredded and I restored everything and from that moment anything I install doesn't seem to work the fingerprint sensor ... only with the "miui" works correctly ...
Click to expand...
Click to collapse
did you try fastboot roms?
The War Profiteer said:
did you try fastboot roms?
Click to expand...
Click to collapse
no, I haven't tried it yet, I've always hated using something other than TWRP ... lastly I'll try that solution too ... anyway it's a mistake ... as I said before everything worked fine and now it only works in the rom miui.eu ... really curious ....
tomorrow I also try the AOSPextended and see if the miracle happens, I doubt it ...
the strangest part is just in the error ... any setting I put does not return errors or other ... it simply takes the ok but in the settings does not change anything
Try to install any custom rom over Xiaomi.eu without wiping system. If it doesn't help you can try to install persist.img from fastboot China dev miui rom( the same version as your xiaomi.eu rom). You must use twrp that support persist partition (e.g. wszx150)
https://xiaomi.eu/community/threads/download-twrp-for-mi8-dipper.46551/
mar.ur said:
Try to install any custom rom over Xiaomi.eu without wiping system. If it doesn't help you can try to install persist.img from fastboot China dev miui rom( the same version as your xiaomi.eu rom). You must use twrp that support persist partition (e.g. wszx150)
https://xiaomi.eu/community/threads/download-twrp-for-mi8-dipper.46551/
Click to expand...
Click to collapse
I rectify ... not even the rom "miui.eu" reads me more the fingerprint ... the sensor works because if it enabled the unlock function without fingerprint the sensor works correctly but no rom allows me to use more the settings of release
to install the persist.img I have to unpack the rom or do I have to flesh the full rom ??
The best way to get rid of problems with sensors is flashing full fastboot rom with Miflash. Notice that you can't lock bootloader if you install global on CN version and vice versa. You can try to repair sensors by flashing persist.img unpacked from fastboot rom.
In your case if sensors work good I don't know if it is necessary and will it help. In miui you can check sensors in service menu. Just tap several times in kernel version
pollopopo said:
no, I haven't tried it yet, I've always hated using something other than TWRP ... lastly I'll try that solution too ... anyway it's a mistake ... as I said before everything worked fine and now it only works in the rom miui.eu ... really curious ....
tomorrow I also try the AOSPextended and see if the miracle happens, I doubt it ...
the strangest part is just in the error ... any setting I put does not return errors or other ... it simply takes the ok but in the settings does not change anything
Click to expand...
Click to collapse
Then flash a fastboot Rom. If it doesn't solve, then nothing will.
mar.ur said:
The best way to get rid of problems with sensors is flashing full fastboot rom with Miflash. Notice that you can't lock bootloader if you install global on CN version and vice versa. You can try to repair sensors by flashing persist.img unpacked from fastboot rom.
In your case if sensors work good I don't know if it is necessary and will it help. In miui you can check sensors in service menu. Just tap several times in kernel version
Click to expand...
Click to collapse
ti scrivo in italiano visto che quel "vice versa" mi puzza di bruciato
sicuro che non pianto il dispositivo passando da global a cinese?? sapevo che la pratica non era vista di buon occhio...o volevi dire l'opposto e quindi mi consigliavi di scrivere solo il persist per evitare casini
se passo da fastboot una dev globale originale non ho problemi con il bootloader ??
il sensore nel check funziona, se lo tocco nel mentre lancio il test invece mi restituisce errore al test PIXEL OPEN TEST
The War Profiteer said:
Then flash a fastboot Rom. If it doesn't solve, then nothing will.
Click to expand...
Click to collapse
I will try as recommended above, and then I will give the total flash of a china dev rom, i flash from fastboot a china dev rom... I have problems with encryption or bootlader lock (i have a mi8 global)?? so I have to lose all the data to use xiaomi.eu or similar or does it change anything as I am now?
pollopopo said:
I will try as recommended above, and then I will give the total flash of a china dev rom, i flash from fastboot a china dev rom... I have problems with encryption or bootlader lock (i have a mi8 global)?? so I have to lose all the data to use xiaomi.eu or similar or does it change anything as I am now?
Click to expand...
Click to collapse
Use global fastboot on a global device.
Stop trying **** and flash goddamn fastboot Rom. Recovery roms wont help you.
The War Profiteer said:
Use global fastboot on a global device.
Stop trying **** and flash goddamn fastboot Rom. Recovery roms wont help you.
Click to expand...
Click to collapse
flash dev global rom without erase data (miflash)
flash TWRP (ADB)
wipe system, cache, data, dalvik in twrp
flash clean xiaomi.eu 9.8.1
the f***** fingerprint not work.... it works only as a button but not with security settings
any other solution??
Unfortunately I am not Italian. I am Polish. If you have CN version you can't install global rom and if you have globa version you can't install CN rom and relock bootloader.
pollopopo said:
flash dev global rom without erase data (miflash)
flash TWRP (ADB)
wipe system, cache, data, dalvik in twrp
flash clean xiaomi.eu 9.8.1
the f***** fingerprint not work.... it works only as a button but not with security settings
any other solution??
Click to expand...
Click to collapse
You have already been given the solution, the solution is to use adb or the All in One Tool, and flash the fastboot version Rom, which flashes and restores the driver images including restoring the fingerprint driver.
In addition, you will very likely need to format ( not Wipe FORMAT ) Otherwise, you are just wasting time. Backup any wanted files to the PC and then format your device. In you are not comfortable with ADB use the All in one tool. Its makes this process easy. Especially for people, not familiar with ADB. https://forum.xda-developers.com/mi-8/development/tool-tool-one-driverstwrpfactory-t3895807
tsongming said:
You have already been given the solution, the solution is to use adb or the All in One Tool, and flash the fastboot version Rom, which flashes and restores the driver images including restoring the fingerprint driver.
In addition, you will very likely need to format ( not Wipe FORMAT ) Otherwise, you are just wasting time. Backup any wanted files to the PC and then format your device. In you are not comfortable with ADB use the All in one tool. Its makes this process easy. Especially for people, not familiar with ADB. https://forum.xda-developers.com/mi-8/development/tool-tool-one-driverstwrpfactory-t3895807
Click to expand...
Click to collapse
I did the suggested procedure (the procedure you quoted is the one I performed) without formatting the "data" partition, it shouldn't change anything
the problem is that it doesn't work yet ....
You need go to recovery, file manager and then delete locksetting.db in /data/system/
Dendyadinirwana said:
You need go to recovery, file manager and then delete locksetting.db in /data/system/
Click to expand...
Click to collapse
thank you very much, this solved my problem
Hey there. I also get the Pixel open test error. I am using Stock Rom. Already changed the fingerprint scanner which didnt help.
Is this a Software error only?
Any suggestion?
hello everyone i need help asap
i was running havoc and after a reboot i had bootloops and this error on twrp failed to mount /persist (invalid argument)
i tried everything i found on google but it still did not fix it
i tried to manually install persist.img but i cant do this cause i cant mount persist partition in twrp
i formatted data and installed other roms, bootloops again
finally if flashed with fastboot stock rom but again bootloop, this solution should be the fix but no
please any suggestions?
Use TWRP 3.3.1.0-0607 CN by wzsx150 to flash persist partition, can be downloaded at:
https://forum.xda-developers.com/showpost.php?p=79902192&postcount=111
It seems not only me got this problem, I tried many MIUI roms and the problem is happening over and over again.
- I use the phone for few days, then it couldn't wake up, and then boot loops.
- I was using the phone and then it hanged, and force reboot would lead into another boot loops.
Then I have to reflash the persist partition to fix the problem.
i have this problem too . and until now idk what cause /persist error .
just use TWRP from 2nd post . and flash persist.img only from MIUI .
then Format Data .
dasklney said:
Use TWRP 3.3.1.0-0607 CN by wzsx150 to flash persist partition, can be downloaded at:
https://forum.xda-developers.com/showpost.php?p=79902192&postcount=111
It seems not only me got this problem, I tried many MIUI roms and the problem is happening over and over again.
- I use the phone for few days, then it couldn't wake up, and then boot loops.
- I was using the phone and then it hanged, and force reboot would lead into another boot loops.
Then I have to reflash the persist partition to fix the problem.
Click to expand...
Click to collapse
kmzway000 said:
i have this problem too . and until now idk what cause /persist error .
just use TWRP from 2nd post . and flash persist.img only from MIUI .
then Format Data .
Click to expand...
Click to collapse
thank you so much finally solved it
as you said it randomly did that after a reboot
many years with different devices and i never had such a problem, was so weird to me
?
Dr.Dinel said:
thank you so much finally solved it
as you said it randomly did that after a reboot
many years with different devices and i never had such a problem, was so weird to me
Click to expand...
Click to collapse
how to flash?
Mr.Edu said:
how to flash?
Click to expand...
Click to collapse
Install the twrp that the other guy up posted
Pick the persist.img from every stock miui rom and restore it from twrp
If you need help post here
Dr.Dinel said:
Install the twrp that the other guy up posted
Pick the persist.img from every stock miui rom and restore it from twrp
If you need help post here
Click to expand...
Click to collapse
In miui rom for xiaomi redmi 6 cereus there is no persist.img file is only boot.img and I have error failed to mount '/ persist' (invalid argument) How to fix it?
burzaa4 said:
In miui rom for xiaomi redmi 6 cereus there is no persist.img file is only boot.img and I have error failed to mount '/ persist' (invalid argument) How to fix it?
Click to expand...
Click to collapse
Hey mate, I also have a redmi 6. Have you been able to do anything about persist.img?
kmzway000 said:
i have this problem too . and until now idk what cause /persist error .
just use TWRP from 2nd post . and flash persist.img only from MIUI .
then Format Data .
Click to expand...
Click to collapse
thanks
Dr.Dinel said:
ola a todos preciso de ajuda o mais rapido possivel
eu estava executando o havoc e após uma reinicialização eu tinha bootloops e este erro no twrp falhou ao montar / persistir (argumento inválido)
tentei de tudo que encontrei no google mas não resolveu
tentei instalar manualmente o persist.img, mas não consigo fazer isso porque não consigo montar a partição persist no twrp
formatei dados e instalei outras roms, bootloops novamente
finalmente, se flashado com fastboot stock rom, mas novamente bootloop, esta solução deve ser a correção, mas não
por favor alguma sugestão?
Click to expand...
Click to collapse
estou com esse problema . falha ao montar persist . no samsung galaxy S4 mini. pode me ajudar ?
Davidkrmc said:
estou com esse problema . falha ao montar persist . no samsung galaxy S4 mini. pode me ajudar ?
Click to expand...
Click to collapse
Please use English on XDA.
See
Galaxy S 4 Mini Q&A, Help & Troubleshooting
This forum is for all of your questions about the Samsung Galaxy S 4 Mini. If you need help troubleshooting a problem, please be as specific as possible by describing your software configuration, including the ROM, kernel, and any modifications you've done.
forum.xda-developers.com
i have same problem with redmi y2 , when i am wiping data it is showing failed to mount /'persist' (invalid argument)
please help trying find this solution but was not succesfull ,
how to recover from this error
dasklney said:
Use TWRP 3.3.1.0-0607 CN by wzsx150 to flash persist partition, can be downloaded at:
https://forum.xda-developers.com/showpost.php?p=79902192&postcount=111
It seems not only me got this problem, I tried many MIUI roms and the problem is happening over and over again.
- I use the phone for few days, then it couldn't wake up, and then boot loops.
- I was using the phone and then it hanged, and force reboot would lead into another boot loops.
Then I have to reflash the persist partition to fix the problem.
Click to expand...
Click to collapse
Sir i have a same problem also
Dr.Dinel said:
Install the twrp that the other guy up posted
Pick the persist.img from every stock miui rom and restore it from twrp
If you need help post here
Click to expand...
Click to collapse
Hello bro i m getting error of failed to mount persist and failed to mount cust invalid argument. When i try reboot to system it stucks on fastboot. How can i flash a ROM now bcz evertime i try to flash it shows failed to mount persist/cust. Please help me
dasklney said:
Use TWRP 3.3.1.0-0607 CN by wzsx150 to flash persist partition, can be downloaded at:
https://forum.xda-developers.com/showpost.php?p=79902192&postcount=111
It seems not only me got this problem, I tried many MIUI roms and the problem is happening over and over again.
- I use the phone for few days, then it couldn't wake up, and then boot loops.
- I was using the phone and then it hanged, and force reboot would lead into another boot loops.
Then I have to reflash the persist partition to fix the problem.
Click to expand...
Click to collapse
I am facing problem of failed to mount persist and cust so I can't able to flash a new rom and i accidentally deleted my earlier rom from device so now i am stuck on fastboot and device usb plugging is also off so tell me now what i can do to fix this issue.. plzz anyone help me
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
I had this same problem of giving an error in the installation of TWRP, in fact, before installing TWRP, you have to install vbmeta, it is what blocks the installation of TWRP, install it and then install TWRP that will work, download vbmeta disabled, install in AP, then install TWRP and be happy
Thank you man! Going to, one last question, is it going to be flash-able with ODIN or do i need to use another installation method?
Thanks again for your quick response!
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
alb.boy said:
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
Click to expand...
Click to collapse
Show log...
And you write your message not there, there is a separate topic for questions
use twrp 3.4
alb.boy said:
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
Click to expand...
Click to collapse
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
alb.boy said:
@Deivid Soltoski recebi a mesma mensagem de falha mesmo quando tentei fazer o flash do vbmeta desabilitado...acho que é outra maneira de instalar não através do ODIN...
Click to expand...
Click to collapse
Oh no, but if you're having more problems, try downgrading to Android 10, which has fewer problems
tutibreaker said:
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
Click to expand...
Click to collapse
I have done that through development mode. But still not working
alb.boy said:
I have done that through development mode. But still not working
Click to expand...
Click to collapse
No you dont, dude search for a guide here and read it
tutibreaker said:
No you dont, dude search for a guide here and read it
Click to expand...
Click to collapse
Will try, thanks though!
Help Needed
I have moto g9 plus (xt2087-1)
I unlocked the bootloader
Installed retail version on it which is android 11 (don't know the previous version btw my region is pakistan and the device is testing piece Motorola confidential piece)
then i have installed twrp on it after that i have installed pixel experience on it and after the installation complete twrp reboots the phone and it hard bricked and on edl mode.
I also tried blankflash on lolinet site not worked and also tried blankflash from this thread (https://forum.xda-developers.com/t/unbrick-moto-g9-plus.4338703/) this is also not worked.
I need blankflash for this device please help
Information about the device and firmware was given below
moidel: xt2087-1
android version: 11
Firmware Version: (ODESSA_RETAIL_11_RPAS31.Q2-59-17-4-5-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip)
OfficialHS said:
Help Needed
I have moto g9 plus (xt2087-1)
I unlocked the bootloader
Installed retail version on it which is android 11 (don't know the previous version btw my region is pakistan and the device is testing piece Motorola confidential piece)
then i have installed twrp on it after that i have installed pixel experience on it and after the installation complete twrp reboots the phone and it hard bricked and on edl mode.
I also tried blankflash on lolinet site not worked and also tried blankflash from this thread (https://forum.xda-developers.com/t/unbrick-moto-g9-plus.4338703/) this is also not worked.
I need blankflash for this device please help
Information about the device and firmware was given below
moidel: xt2087-1
android version: 11
Firmware Version: (ODESSA_RETAIL_11_RPAS31.Q2-59-17-4-5-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip)
Click to expand...
Click to collapse
jhenao12 said:
Click to expand...
Click to collapse
Bro thanks for your reply but i can't access fastboot because my phone is on EDL mode hard bricked unable to go to fastboot. first i have to flash it with qcom , i need the right blankflash files for my model.
OfficialHS said:
Hermano, gracias por su respuesta, pero no puedo acceder a fastboot porque mi teléfono está en modo EDL bloqueado y no puede ir a fastboot. primero tengo que flashearlo con qcom, necesito los archivos blankflash correctos para mi modelo.
Click to expand...
Click to collapse
jhenao12 said:
Click to expand...
Click to collapse
OfficialHS said:
Bro thanks for your reply but i can't access fastboot because my phone is on EDL mode hard bricked unable to go to fastboot. first i have to flash it with qcom , i need the right blankflash files for my model.
Click to expand...
Click to collapse
I really would have liked to help you bro
A long story cut into short, earlier i did something wrong while flashing stock rom via sp tool which led to lose of IMEI so reached to a local service center but he messed up more rather solving the existing problem, so now i'm able to boot into fastboot & have been able to unlock boot loader as well but getting "nv data corrupted" with continues bootloop
Please help.
GAGANKXDA said:
A long story cut into short, earlier i did something wrong while flashing stock rom via sp tool which led to lose of IMEI so reached to a local service center but he messed up more rather solving the existing problem, so now i'm able to boot into fastboot & have been able to unlock boot loader as well but getting "nv data corrupted" with continues bootloop
Please help.
Click to expand...
Click to collapse
Try with Miflash
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
Try with Miflash
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
did exactly as instructed in the link but no luck phone rebooted to stock recovery with "nv data corrupted" error
GAGANKXDA said:
did exactly as instructed in the link but no luck phone rebooted to stock recovery with "nv data corrupted" error
Click to expand...
Click to collapse
Can you post the Miflash log(folder Miflash Log).
Try this tool:
https://xiaomitools.com/sp-flash-tool-en/
NOSS8 said:
Can you post the Miflash log(folder Miflash Log).
Try this tool:
https://xiaomitools.com/sp-flash-tool-en/
Click to expand...
Click to collapse
please refer logs as follows:
GAGANKXDA said:
please refer logs as follows:
Click to expand...
Click to collapse
Everything is correct but nothing has been flashed, often the case with Mediatek devices, use the tool mentioned above
GAGANKXDA said:
A long story cut into short, earlier i did something wrong while flashing stock rom via sp tool which led to lose of IMEI so reached to a local service center but he messed up more rather solving the existing problem, so now i'm able to boot into fastboot & have been able to unlock boot loader as well but getting "nv data corrupted" with continues bootloop
Please help.
Click to expand...
Click to collapse
Ther is a fix available. Watch this video here
NOSS8 said:
Everything is correct but nothing has been flashed, often the case with Mediatek devices, use the tool mentioned above
Click to expand...
Click to collapse
i'm familiar with the older version (SP_Flash_Tool_v5.1924_Win) of this tool but not with the new one, could you please suggest from where i'll get these files..? I'm trying to flash now V13.0.3.0.SKLINXM of Indian Version Fastboom ROM..
GAGANKXDA said:
i'm familiar with the older version (SP_Flash_Tool_v5.1924_Win) of this tool but not with the new one, could you please suggest from where i'll get these files..? I'm trying to flash now V13.0.3.0.SKLINXM of Indian Version Fastboom ROM..
Click to expand...
Click to collapse
Sorry but I don't have (and never will have) a Mediatek device, but surely other users will be able to help you.
mvikrant97 said:
Ther is a fix available. Watch this video here
Click to expand...
Click to collapse
need to open back cover for this, any fix with software/command etc only..?
GAGANKXDA said:
need to open back cover for this, any fix with software/command etc only..?
Click to expand...
Click to collapse
Without EDL this fix is not possible!
Another fix is there with the file below but you will need to get it from the website given below!
MI NOTE 10 NV Data is Corrupted Fix (The Device Must Be On TWRP) | Halab Tech Support
support.halabtech.com
No need with Mediatek only with Qualcomm.
https://forum.xda-developers.com/t/...icked-redmi-note-9-merlin-hard-brick.4347025/
Xiaomi Redmi Note 10S after Dual imei repair nv Data Corrupted FIX
GO TO Wipe Partitions
Uncheck All File
Check Only (1) nvram (2) nvdata
Xiaomi Redmi Note 10S nv Data Corrupted FIX
NV Data backup attachedBACKUP NV DATA REDMI NOTE 10s (rosemary)
mvikrant97 said:
View attachment 5725275
Xiaomi Redmi Note 10S after Dual imei repair nv Data Corrupted FIX
GO TO Wipe Partitions
Uncheck All File
Check Only (1) nvram (2) nvdata
Xiaomi Redmi Note 10S nv Data Corrupted FIX
NV Data backup attachedBACKUP NV DATA REDMI NOTE 10s (rosemary)
Click to expand...
Click to collapse
this tool doesn't start with an error "card not found", i did google too but nothin helped... would be greatful if you could throw some light..
Did you get it done?
I have a security backup file using THIS tool. Hope it helps.
Copy the attached file to the security backup folder of the software.
I'm not so sure about using other tools and flashing my backup files. You'll need to install the drivers but I think you already have because you were using SP Flash Tool.
Restore it under EXTRA tab once you are in software.
I hope you don't need to rename the file.
If necessary,
try backing up your corrupted security file first with this software.
Check and copy the file name of yours.
Delete your file.
Then simply rename my file to your name.
Restore.
luckydaysbegin said:
Did you get it done?
I have a security backup file using THIS tool. Hope it helps.
Copy the attached file to the security backup folder of the software.
View attachment 5734855
I'm not so sure about using other tools and flashing my backup files. You'll need to install the drivers but I think you already have because you were using SP Flash Tool.
Restore it under EXTRA tab once you are in software.
View attachment 5734857
I hope you don't need to rename the file.
If necessary,
try backing up your corrupted security file first with this software.
Check and copy the file name of yours.
Delete your file.
Then simply rename my file to your name.
Restore.
Click to expand...
Click to collapse
Thanks a ton, i have been able to get out of this "nv data corrupted" error but IMEI are still missing from the phone, have gone through multiple youtube videos but unfortunately every guide instructs to reboot phone into META MODE which i'm not able to do it in REDMI NOTE 10s
GAGANKXDA said:
Muchas gracias, pude salir de este error de "datos nv dañados", pero todavía falta el IMEI en el teléfono, he revisado varios videos de YouTube, pero desafortunadamente cada guía indica que reinicie el teléfono en MODO META, que no soy capaz de hacerlo en REDMI NOTE 10s
Click to expand...
Click to collapse
pags have you solved?
MTKAndroid said:
pags have you solved?
Click to expand...
Click to collapse
no luck so far
GAGANKXDA said:
no luck so far
Click to expand...
Click to collapse
what system do you have? when sae nv data is corrupt it is because the imei is gone.
GAGANKXDA said:
no luck so far
Click to expand...
Click to collapse
I have a professional tool to fix that problem