Hi all
At work I use bluetooth headphones/headset for CALLS
So I am never wearing the headphones/headset unless I am on a PHONE CALL
My problem is that as bluetooth is connected only the phone call sound is coming from the phone - However none of my notifications are showing
Can someone please help me with this issue!
I have no experience with this, but read another thread, here, yesterday describing this.
It seems to be a "feature" of pie.
Related
Done this on loads of different devices with different bluetooth headset and the same result. Able to pair devices no problem. On making a call all one hears is a lot of static no voices. When answering a incoming call the same happens you answer the call but can't hear anything. Referred this the the ever helpfull O2 technical support who advised me to download latest Rom with the same result.
Any suggestions would be much appreciated.
Thanks in advance :roll:
Stupid question but you have tested the bluetooth headset with another phone and checked that its not actually the headset which is faulty?
I spent ages trying to diagnose a problem with my phone when I first got a wired GPS unit and it turned out in the end it was the unit not the phone.
Hi
I had the same problem. It disappeared after a hard reset.
Here is the similar thread: http://forum.xda-developers.com/viewtopic.php?t=41270
Hi everyone. I have had my Tilt for 4months now and it has given me a lot of joy. I have flashed and reflashed with no problems at all. I am currently using Schap's 4.31 Rom with 1.27.12.11 radio.
About a month ago i installed a new car stereo that has bluetooth connectivity with my phone - worked like a charm, paired very easily and generally appeared to be working with no probs.
Then i noticed that if i was in a bluetooth conversation and somebody else was calling (on call waiting), if i switched calls i could not hear anything, and if i ignored the second call, when the person on call waiting hang up, both conversations were terminated. I thought it was odd, but i just deactivated call waiting and thought, "let them try calling me later".
The other, a lot more serious problem, is that sometimes, randomly as far as i realised, the phone will go totally silent - incoming calls won't ring, and when i try to make a call, when i press "talk" then phone does not make that beep that it makes when an outgoing call is initiated. Should the person i call pick up i cannot hear them at all.
A soft reset takes care of this problem, but it has happened to me 3 times already, and i think it was after a bluetooth call.
Has anybody faced this problem before? I need to be available on the phone 24/7 due to my work and i really need to find a solution for this. Yesterday afternoon i took a nap for 45 minutes and had six missed calls that i never heard cause the phone never rang.
The phone is always on "ring" and at full volume.
Any ideas would be welcome.
Thanks
Alkis
Same issue
I'm assuming since I also am facing this same problem that it is not uncommon. It seems to me that it happens after a bluetooth device is turned off. Somehow it sets the volume on everything to mute. I thought only a soft reset would fix it until I discovered that it was just shutting off the volume. Still annoying, though.
Tilt problems with phone going silent
This problem has occurred with my phone every since upgrading to the WM 6.1 and it is related to a bluetooth device being hooked up. Often when someone calls the ringer will go from vibrate to on, but the volume turns all the way off. It will then cycle to off completely. The cycling occurs when a call comes in or when I hang up. I can stop this problem from happening by disconnecting the bluetooth head set. I have tried three different headsets and the problem occurs with all of them (Jawbone I, Jawbone II, and Plantronics) so I know it is not the brand of headset. HTC said to try a download of a screen dimmer problem, but have not done that yet. Anyone have any better advice?
did u guys ever find a solution to this?
its quite annoying missing calls because my phone decides to go silent for some reason
Same issue with GPS
I have the same issue, even when using software that accesses the GPS via bluetooth port. Muting is irritating, but at least voicemail catches messages. What really bothers me is that sometimes the mute is turned off and the volume up, especially when in a private meeting where we do not want interruptions
Gregg
HTC Tytn II bluetooth causes silent setting
I too have had the issue where my phone will go into total silent mode after using my bluetooth stereo hands-free feature. It doen't happen after using my bluetooth headset though.
It happens pretty regular that after using the bluetooth hands-free of my JVC car stereo that when I take the phone elsewhere it is totally silent. no ringer, no alarm (Ptravel alarm is what I use), no audio if I make a call (or receive a call).
It also will cause the phone to be silent on subsequent calls on the bluetooth stereo hands-free: ie: I take a call, hang up and another call will come in and I can answer it but have no audio.
My Tytn II is running the HTC (AT&T) WM 6.1 upgrade. The only thing I have done is use the Advanced configuration manager and the Kaiser tweak to change a few settings for performance and visual enhancements.
I see others are having the same problems.....Has anyone else used the tweaks and maybe that is root of the problem?
Has anyone discovered a fix (really important). My only options are to soft reset every time I get out of the car or not use the JVC bluetooth capability (which is why I replaced the stock radio in the first place).
Thanks
Hi rrackman,
I'd advice for you to look at the following thread:
http://forum.xda-developers.com/showthread.php?t=438457
It's quite long, so better subscribe to it and wait for responses. Several people with Tilt's have the same problem. Myself I have a JVC NX-7000 and an unbranded Kaiser (HTC TyTN II). It works fine with WM6.0, but I have the same issues you mention with WM6.1. First advice while we're searching for the solution: downgrade to WM6.0...
Regards,
Nika.
Is there a solution to this problem?
Try WM6.0 ROM - check out the thread I mention in my sig.
Regards,
Nika.
I did indeed take a look at the thread you linked earlier. Sorry for making the quick post earlier, I should have mentioned that this is regarding the "unexplained volume drop to zero" symptom, not the NSI symptom. Fortunately I don't have the NSI problem, just the drop to zero problem.
Of course downgrading to 6.0 would be the key solution, was just hoping to find a way to avoid doing just that. My phone never had the problem prior to 6.1 and was running the exact same list of applications and settings.
Hi!
I have one black X1i SW ver R3AA010, GENERIC_UK rom.
Great phone, but i have problem with the wired factory headset.
If i have call, phone playing ringtone, and i want receive this call, but no effect. Another problem is mic is on the phone enabled, not on the headset - in ear-phone mode.
On another forums reported same problem.
I see now only one solution:
1.,Unplug Headset from phone
2.,Incoming call, after hearing rintone - plug in the headset
3.,Problem is fixed..., but only to next soft reset or next unplug
Is there any registry mod or cab fix to this?
example : manual headset mode on/off
pls help me, thank you
As you mention, the problem has been scarcely discussed in other threads (and forums), but no one's seemed to find a solution. I'm not even aware if the headset problem is a general flaw in X1, or we're just a few unfortunates.
I won my X1 in a competition so I don't think I'm really in a position to be pissed off, but this defect is indeed a MAJOR drawback, and it surprises me it hasn't been criticised more loudly in e.g. reviews and forums.
The problem smells to me like a firmware issue (though I really don't have a clue), i.e. something that our friends at Sony Ericsson (are you out there, guys?) should be able to fix in an update, but they don't.. :-(
Anyway, my workaround is to make sure the headset is 'armed' in advance whenever I want to be prepared for an incoming or outgoing call. E.g. before I hop on my bicycle, I 'simply' make a short call to whatever number, e.g. to my voicemail, and as soon as there's a connection I plug in my headset and hang up. Now the headset works - I test it by pressing the headset button twice, which should initiate redialling the last number used.
In any case, it shouldn't be necessary to make such arrangements! My previous mobile was a crap, crap Nokia - but I miss it because its headset worked like a charm.
In fact, just out of curiosity - if anyone reading this has an X1 without any headset problems (i.e. mic and button not being responsive), please speak up. Maybe we can then isolate the problem.
Hi,
I've recently gotten the Mi5 and one issue that i have discovered is that when i connect it to the car hands free (Toyota Yaris with Toyota Touch 1) It doesn't let me speak and i can't hear the person on the other end.
There is a workaround where i would have to on the phone swap the output from Bluetooth - Handsfree - back to bluetooth and then it starts working again. I'm not sure its possible to replace the stock phone app on the device but although there is a work around it defeats the purpose of hands free calling if i have to do that while in the car!
Anyone have any ideas for a fix?
Thanks,
gavrai said:
Hi,
I've recently gotten the Mi5 and one issue that i have discovered is that when i connect it to the car hands free (Toyota Yaris with Toyota Touch 1) It doesn't let me speak and i can't hear the person on the other end.
There is a workaround where i would have to on the phone swap the output from Bluetooth - Handsfree - back to bluetooth and then it starts working again. I'm not sure its possible to replace the stock phone app on the device but although there is a work around it defeats the purpose of hands free calling if i have to do that while in the car!
Anyone have any ideas for a fix?
Thanks,
Click to expand...
Click to collapse
Handsfree on my android head unit works perfect. sorry cant offer a solution
skoobee said:
Handsfree on my android head unit works perfect. sorry cant offer a solution
Click to expand...
Click to collapse
I did forget to mention that it worked fine with the Oneplus One it just appears to have this strange bug on the Mi5
Hi gavrai,
I have the same bluetooth issue. But when I answer the call using my phone I can talk using my car's audio without using the 'Bluetooth - Handsfree - back to bluetooth' method.
I am running the MIUI Global 7.2.4.0.0(MAACNDB) on my Mi5 connecting to a Volvo V40.
When I connect a HTC M7 or M8 to the car everything is working ok.
Hope someone has an idea
Maybe we should check the Xiaomi forums if there are any.....
I've got a mi5 and if I'm listening to music and then use the speaker of the phone, i.e. make a call, receive a call, make a voice recording to send via FB messenger or voice recording to send by text, then, when it switches back to music/podcast/bluetooth, the music/podcast starts skipping, like a record. I cannot figure out how to stop this glitch from happening. I've had one or two updates since I got the phone but this keeps happening and it's really frustrating. The only way I can stop the skipping is to turn off my bluetooth and then turn it back on. Any one have this issue or know how to fix it? Thanks
Hi,
I am having some issues when I talk with people thru my car's bluetooth.
When I start a call, after a random period of time, the people that I speak with are telling me that they are not understanding my voice which is becoming like a robot. During these calls, if i change the sound output to my phone and revert back to car, my voice is becoming clearer but it is happening in almost all my conversations.
Did anyone encountered a similar issue or know a possible fix?
Thanks,
No issues here
This one is okay it's my first case.
Feels plastic~e (if that's even a word.. ) but hey whatever protects the most expensive phone I've ever bought. Only thing I don't like is the hole for your fingerprint.
if anyone alse encounters bluetooth issues with phone calls / car. When you use stock Phone app you dont have this issue. Also you can enable bluetooth gabeldorsche from developer options to ensure smoother bluetooth connections...