i have flashed twrp on N9208 nd then flash custom rom. after set up then i logged in playstore with my gmail i.d . After that i reboot my mbil nd now it shows nothing excpet black screen with "custom binary blicked by Frp" written on top. is there any way to avoid this one except flashing stock firmware
Related
hello i have a note 5 9200 China model, i rooted the phone to installl playstore,
i delet my google account inside and samsung account and reboot the phone to sold it to some one,
but now i cant start the device,
i have an error FRP lock
custom binary locked by FRP lock
and shut down directly
even when i try to dflash stock rom with odin i get
Custom Binary Boot Blocked by FRP Lock
stock rom
i tryd all roms on sammobile but nothing happends
Need to try and find the rom it came with or make sure it's 100% the China model rom. Once it's working again. Set it up and then access dev options by clicking this 7 times (yours will be listed under different name) and then turn this on
try
i tryd all the roms on sammobile for my model
but without success
my device is stuck
Try going into android stock recovery and doing a wipe and try again.
i already try it,
even unpack roms and flash singulary files,
i can flash all files but only system not,
i have tryt all system files on sammobile firmware list for my model
i tryd to flash each file separetely on N9200ZHU2A
all files passed but system.img not it continuis fails
can someone help me to flash this last file ? evrythink is working so my recovery is back on place
but system doenst boot and i can flash STOCK roms or System.img of stock roms i have all FRP lock error on all stock roms,
but on N9200ZHU2A-N9200ZZH2AOJ9 all files pass except system.img
hello
i have note5 920c
my phone is root and recovery...
i flash custom rom with twrp ( custom note7) and every things is good but after restart my phone bootloop on samsung logo and on logo write : Custom Binary block by FRP lock
i tried to flash stock rom by odin.... but not flash this rom(stock 6.0.1 )... and error odin.. after flash my phone dont turn off and stay on : an error occurred while
updating the device software
use the emergency recovery function
in the smart switch pc software
on this error write : sw check fail device 1 binary 0
how can fix this problem ? may solve it ba samsung box ? zx3 ?
you can flash the latest stock rom for N920C
Uhm...i faced similar issue. You left oem unlock disabled, which is wrong.
First book into stock recovery, wipe data/factory reset. Wipe everything wipable, then go to download mode. Flash 5.1 stock. If it doesn't work, repeat the wiping, then flash 6.0. Good luck
Hi
The device is Samsung Galaxy Tab S2 8.0 SM-T713.
Following is what happened:
1. Installed TWRP and then Installed Lightning ROM v1.0.
2. Restarted the tablet without turning on OEM Unlock.
3. Did not boot by giving error "custom binary blocked by frp lock"
4. Tried installing stock firmware with odin. Firmware installs successfully but when the tablet reboots, it keep showing the glowing samsung logo.
5. Tried multiple different firmwares and eventually tried the latest firmware for the XAR region. Now only that firmware can be installed and all other older firmwares fail in the installation step giving the error "sw rev check fail aboot fused 2 binary 1"
Would really appreciate if anyone could help.
I assume that flashing pit file with the latest XAR region firmware will help boot the tablet but i cannot find the pit file to use.
Please HELP!
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
lewmur said:
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
Click to expand...
Click to collapse
The problem is that the TWRP recovery is long gone. Its not on the tablet anymore. I cannot flash TWRP because of FRP lock. I can access stock recovery but it also does not allow me to wipe data and factory reset due to FRP lock.
Any other suggestions.
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
rafayzq said:
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
Click to expand...
Click to collapse
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
lewmur said:
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
Click to expand...
Click to collapse
All the problems started when i restarted the tablet running a custom rom without enabling the OEM Unlock option in Developer Options in settings.
The lesson i learned the hard way is that you should always keep the OEM Unlock enabled
So my coworker has a Galaxy S6.
This phone was running nougat. She rooted the phone herself to be able to use 'Snapchat'. The other day she did a factory reset which softbricked her phone so she took it to a store where they installed 6.0.1 and the phone was supposedly rooted although supersu said that the binary was not present. Her phone was acting up so i told her to do a wipe cache. after the restart the device said Custom Binary blocked by FRP
then i flashed Nougat (last version). The device presented the bluescreen that said: Device does not have DRK, contact to SW PL please flash ENG binary then install DRK rebooted into recovery and then in the recovery, every time it boots into recovery it says: No Support SINGLE SKU. Supported API: 3. Dm-verity error.... Failed code: 0x02
I tried flashing TWRP but it was blocked by FRP returning the error in download mode: Custom Binary (recovery) blocked by FRP
I cant enable OEM Unlock because the phone wont pass the Samsung Galaxy S6 logo.
What can i do? What options do i have?
************update 1
I downloaded the CF Auto root from Firmware.Mobi: Problem is: The phone is not OEM Unlocked and i don't have access to the phone settings so i can't flash CF auto root because i can't flash a recovery.
************update 2
I can't downgrade either to 6.0.1 (QC2) . So i'm stucked on Nougat, when i try to downgrade it says: (Device 6 Binary 5). Can't root it, can't flash a recovery.
Is there any way to turn off FRP from the recovery using ADB ? Is there anything i can flash in spite of the phone running Nougat so that i can turn off FRP ?
Should i go to a store and ask for DRK to be fixed with a Z3X box ?
So i flashed custom rom and wanted to root. I had by then, disable OEM Unlock because an app didn't work. So i forgot to enable before rooting, now i can't boot my phone at all.
I tried what i did on my Galaxy s8 at that time, but it get's stuck at Sboot.img when flashing latest stock firmware using odin.
Anyone know what i can do ?
It wont boot, just loops and says that red message. Custom binary frp lock