Related
How to Remove Screen Scratches from Galaxy S I9000.
I bought DISPLEX Display Polish, But it says: Do not use on touchscreens and Polycarbonate(PC). Any ideas?...
screen protectors is what first came to mind
but obviously it's too late for that.
not exactly sure if there is any creme you can use to repolish the scratched surface.
might have to just live with it and put a screen protector on top, and see if that hides the scratch.
How bad is the scratch?
got picture?
set camera to macro mode
Scratches on my screen are very small. If i slide with my finger over my screen, i can fill some of them. Sorry for the bad quality of the pic.
russwarez said:
Scratches on my screen are very small. If i slide with my finger over my screen, i can fill some of them. Sorry for the bad quality of the pic.
Click to expand...
Click to collapse
those are okay, looks like Keys scratches?
put a screen protector on, they will mostly disappear
AllGamer said:
those are okay, looks like Keys scratches?
put a screen protector on, they will mostly disappear
Click to expand...
Click to collapse
Not only keys, also screwdrivers.
Thanks for the answer. I will notice that for the Future.
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Everyone going for thinner bezel and you need bigger... Should not happen it looks better this way
I have large hand and with this thin bezel I do find that I sometimes touch the far edge of the screen inadvertently. So there is an argument for a larger bezel.
kuromusha38 said:
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Click to expand...
Click to collapse
You do realize you can make an icon for notification bar or even create a gesture?
MikeJennni said:
You do realize you can make an icon for notification bar or even create a gesture?
Click to expand...
Click to collapse
Dude, when I'm watching Japanese porn using BSplayer or something, how will your method help?
Simply add a bumper
Zanr Zij said:
Simply add a bumper
Click to expand...
Click to collapse
The bezel was reduced to allow a larger screen without a huge form factor to better fit in your pocket/hand. Some cases don't work great with the fingerprint scanner. It's all about trial and error.
No thanks.
No, don't do that. Society has finally realized the bezel is overrated.
Sent from my SM-N910P using Tapatalk
More bezzle? Sounds like a fail LOL.
Me and im pretty sure most of the market is shooting for smaller and less bezzle.
Look at the LG G3 for example. Such a large screen but the phone itself is small.
Small bezzle is the future. Simple as that. Im also sure thats where manufatureres are headed.
kuromusha38 said:
Bezel too thin these days, I can not swipe notification bar when landscape mode when I have UAG case on. Please increase the bezel size.
Click to expand...
Click to collapse
The problem is your case, not the phone!
Regards,
Dave
Yes indeed, u r probably the only person who would ask for more bezel. Get a different case
I will tell Samsung CEO about your troubles an be sure they make the changes foe you on Note 5.
Sent from my SM-N910W8 using Tapatalk
Make sure to tell Boo-Keun Yoon I don't want any bezel.... the whole phone should be a dsiplay; like the edge but on all sides.
I think what you are after is an edge that doesn't pass/protrude from the screen. But then it won't protect it either.
In the mornings the sensor holes in the protector would fit great. But throughout the day it sort of slides a bit. By night it slightly covers the sensor. Please tell me I'm not crazy. I'm using the ultimate shield tempered glass.
Did you use wet application?
cyphomatic said:
Did you use wet application?
Click to expand...
Click to collapse
No
Did you check under the light angle? Sometimes the alignment shows off under other direction.
cyphomatic said:
Did you check under the light angle? Sometimes the alignment shows off under other direction.
Click to expand...
Click to collapse
Ok, now I feel like an idiot.
Probably haunted,
by a phantom
ha ha
ha..
Ill get my coat
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.
as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one
Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.
sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.
Hi guys, i have been looking on amazon and i cant seem to find a tempered glass screen protector, anyone know where to buy it?
Look here:
https://www.aliexpress.com/item/4000375464335.html?spm=a2g0s.9042311.0.0.34de4c4dHq9TK4
I bought the Asling from gearbest but it has a "hole" in the finger sensor part, it has glue there which can be seen when you use the phone.
Is there any other good screen protector? I'd prefer with a selfie camera hole to not have flare on certain angles.
Luko69 said:
Look here:
https://www.aliexpress.com/item/4000375464335.html?spm=a2g0s.9042311.0.0.34de4c4dHq9TK4
Click to expand...
Click to collapse
thanks for the reply but i am not a big fan of stores like aliexpress, to many people talk bad of it.
No problem with aliexpress, I buy a lot there.
el_gordito said:
thanks for the reply but i am not a big fan of stores like aliexpress, to many people talk bad of it.
Click to expand...
Click to collapse
Yeah it's not a problem buying anything there it's about the shipping time if you willing to wait 1 and a half month to get the screen protector no problem
There are loads on amazon actually. Already ordered mine.
Kasallamacher said:
There are loads on amazon actually. Already ordered mine.
Click to expand...
Click to collapse
Can you give the link of Amazon .
Manmohan10 said:
Can you give the link of Amazon .
Click to expand...
Click to collapse
https://www.amazon.de/Dotuo-Panzerglas-Schutzfolie-Panzerglasfolie-Displayschutzfolie/dp/B081J1CLHX
Any one need this cool case from Xiaomi for Mi Note 10/ CC9Pro
https://s.click.aliexpress.com/e/37ATguHa
Link isn't working. Just brings me to the main page
Kasallamacher said:
https://www.amazon.de/Dotuo-Panzerglas-Schutzfolie-Panzerglasfolie-Displayschutzfolie/dp/B081J1CLHX
Click to expand...
Click to collapse
thanks, going to check it.
Manmohan10 said:
Any one need this cool case from Xiaomi for Mi Note 10/ CC9Pro
https://s.click.aliexpress.com/e/37ATguHa
Click to expand...
Click to collapse
Thank you so much, been looking for these all day long!
Any one need nilkin case for CC9Pro/Mi Note10.
https://s.click.aliexpress.com/e/sJfBEPWs
I used a tempered glass for 1 day and removed it again (from Gearbest https://www.gearbest.com/screen-protectors/pp_009176272936.html?wid=1433363 They simply deleted my 3-Star-Review). It also had that glue at the fingerprint position, which was very annoying.
Besides that I noticed that touch sensitivity is not that good with the tempered glass. For fingerprint unlock you had to press very hard/deep to get the fingerprint recognized.
I also tried to increase touch sensitivity with a trick I found online (Settings - Additional Settings - Languages & input - Keyboard, mouse, and track pad - Pointer speed: Increase Pointer speed for more sensitivity) but it didn't help at all.
Does anyone know a good tempered glass with curved edges, without the fingerprint glue and supporting nearly the original touch sensitivity?
matzn1 said:
I used a tempered glass for 1 day and removed it again (from Gearbest https://www.gearbest.com/screen-protectors/pp_009176272936.html?wid=1433363 They simply deleted my 3-Star-Review). It also had that glue at the fingerprint position, which was very annoying.
Besides that I noticed that touch sensitivity is not that good with the tempered glass. For fingerprint unlock you had to press very hard/deep to get the fingerprint recognized.
I also tried to increase touch sensitivity with a trick I found online (Settings - Additional Settings - Languages & input - Keyboard, mouse, and track pad - Pointer speed: Increase Pointer speed for more sensitivity) but it didn't help at all.
Does anyone know a good tempered glass with curved edges, without the fingerprint glue and supporting nearly the original touch sensitivity?
Click to expand...
Click to collapse
This is the best temper glass with full glue for CC9Pro
https://banggood.app.link/WMKqep0f91
Anyone had any problems with the proximity sensor not working? I have applied a thin film type screen protector that seems to prevent the proximity sensor from working
its hard to expect good TG for this kind of curving phone. I think hydrogel is a safer and better option. Not to mention it's cheap. (USD 1.2)
There are lots of problems with the proximity sensor, with or without screen protectors, don't worry. Should be fixed with an update
I got a Mocolo UV tempered glass screen protector on my Mi Note 10. In-screen fingerprint sensor works perfectly. Bought from Swedish online store. Can't seen to find it anywhere else right now.. so perhaps not to helpful.
Update: Found it here, not a clue if this site is safe or anything as I never used it. But this is the kind of screen protector I have.
https://www.tvc-mall.com/details/mo...2224a.html?source=ShareAsale&sscid=c1k3_dkrus