Hello,
I can not run my 4g lte.
The Mobile Network Settings window is grayed out. I can not change anything;
one usb one touch storage memory is corrupted
I thinks it's a problem of usb debug. How can i do'its?
Someone would have any idea ?
thank you
Related
I bought nexus one from my friend.
I am currently using HD2 with 3g data.
When I plugged in my sim card to the n1, it only worked with edge.
So, I seared internet for some information and I found out something about "*#*#6436#*#*" and change the setting to WCDMA only. Then the phone got no signal at all, so I changed back to WCDMA preferred. Then I did ping test but it did not seem to work very well.
Then I played with some APN setting and I realized that I lost data connection completely (phone still working)
I have tried to reset the phone but no luck.
Can anyone please help me with the problem? I am using T-mobile.
Thank you.
Pull your battery, and look at the back of your phone. At the top of the dark area there are numbers, look at the PB or FCC ID numbers. If they end in 9110 then you have an AT&T version of the phone, and the hardware will not work with T-Mobile's 3G service...
khunny7 said:
I bought nexus one from my friend.
I am currently using HD2 with 3g data.
When I plugged in my sim card to the n1, it only worked with edge.
So, I seared internet for some information and I found out something about "*#*#6436#*#*" and change the setting to WCDMA only. Then the phone got no signal at all, so I changed back to WCDMA preferred. Then I did ping test but it did not seem to work very well.
Then I played with some APN setting and I realized that I lost data connection completely (phone still working)
I have tried to reset the phone but no luck.
Can anyone please help me with the problem? I am using T-mobile.
Thank you.
Click to expand...
Click to collapse
are you in the USA? you need to list your location. it is likely that you purchased the wrong version of the nexus one. there is an ATT version and a tmobile version. each only works with the proper 3G. so an ATT n1 on tmobile only gets edge, and vice versa. check which version you own.
Hello,
i've just upgraded to the latest official OTA FW 3.08.405.3
Sense3.0 is great, but i cannot turn on mobile network anymore - i tried it both via Quick settings and Wireless settings menus - it cannot be enabled. And even worts is that it doesn't report any error msg and the 3G sign doesn't appear on status bar. There is noting in the log too...
Does anyone has the same problem?
I just wrote a mail to HTC support, but don't know if they track this as support channel...
This is terrible - i can't live without mobile network connection ...please help!
10x
Boby
This might sound weird, but is there anything in APN setting?
Try to mess with the toggles. I have had similar problem. I constantly turned airplane mode on/off and switched from GSM to WCDMA. Finally it goes, if this isn't related to apn. Hope i helped.
10x a lot guys !
it didn't recover APN settings after upgrade
I previously checked them, and assumed that check-box is selected, but actually it was not. It should be colored in green, but actually it was in grey
Unable to re-enable Mobile Network for data-only SIM Japan -- possible bug?
Having a similar problem, some more details:
PHONE:
I am using an unlocked (but unrooted) Incredible S from Virgin Mobile Canada with a data-only BMobile SIM in Japan (runs on DoCoMo's network apparently). Android 2.3.3 (Virgin Canada circa August 2011).
PROBLEM:
Mobile Network intermittently gets disabled and cannot be re-enabled normally. APN is fine, SIM card (phone number) is still detected. Toggling Airplane Mode or Wireless Network does not work, Select Automatically returns "unable to connect, try again later", Search Networks and choosing DoCoMo returns "Your SIM card does not allow a connection to this network".
SOLUTION:
Only reproducible solution is to remove data-only SIM, insert voice&data SIM (from my SoftBank phone), now Mobile Network is available so re-enable it, power down and replace data-only SIM. Once restarted Mobile Network automatically enables. Obviously this is not a convenient fix.
Once was fixed by randomly hitting network settings in frustration, but I have not been able to reproduce this solution.
OBSERVATION:
When on wireless, Mobile Network is also greyed out. When Wireless Network is disabled, Mobile Network automatically enables properly (for the most part, at least once I suspect it did not).
Thus I feel like it's a bug, either in OS or DoCoMo's network, but BMobile and HTC both point the finger at each other and have no useful suggestions for me.
ASIDE:
I hear Android 2.3.5 is available for Incredible S, perhaps this fixes the problem. However, this update has not appeared in my updater -- is it possible that because I'm unlocked I've lost access to the update server?
Thanks in advance for any suggestions.
mobile network disconnected
Have also the same problem, tried all the above suggestions but none works. Phone only shows limited service but with x on the signal bar. BUt when i try to tap the sim tool kit, it displays "SIM toolkit not ready or unsupported".
Hope somebody here can help me. Thanks
iqbelnas said:
Have also the same problem, tried all the above suggestions but none works. Phone only shows limited service but with x on the signal bar. BUt when i try to tap the sim tool kit, it displays "SIM toolkit not ready or unsupported".
Hope somebody here can help me. Thanks
Click to expand...
Click to collapse
+1
Hi guys,
I need some help understanding if my phone i faulty. I have an HTC ONE 801n sim free UK and when I go to Settings > Mobile data / Mobile Network Settings > Network Mode I don't see the GSM/WCDMA/LTE auto line. I spoke with HTC and they told me I need to have a 4G sim card for that line to appear witch at the moment I don't have it to try. Can someone confirm that HTC is telling me is true? Can someone try a non 4g sim and check if the GSM/WCDMA/LTE auto appear in Settings > Mobile data / Mobile Network Settings > Network Mode? just because I am still in time for an exchange. Thanks!!!
Edit:
After 53 Views looks like no one wants to help me!!! what you just need to do is going to: Settings > Mobile data / Mobile Network Settings > Network Mode and if you are using a 3g non 4g sim card check if you can see the setting: GSM/WCDMA/LTE auto. That's all. Thanks!!
Anyone??? Please!!!
AFAIK only 801e models do not support LTE. Anything else does, just different LTE frequencies. Got any friends with LTE sims you could borrow? Some iPhone buddies or Samsung people.
ArmedandDangerous said:
AFAIK only 801e models do not support LTE. Anything else does, just different LTE frequencies. Got any friends with LTE sims you could borrow? Some iPhone buddies or Samsung people.
Click to expand...
Click to collapse
No, I don't know no one with a 4g sim!! that's why I was hoping someone with my same phone could try a 3g sim and see if he doesn't have that setting like me (GSM/WCDMA/LTE auto). Anyone? Thanks!!
super34 said:
No, I don't know no one with a 4g sim!! that's why I was hoping someone with my same phone could try a 3g sim and see if he doesn't have that setting like me (GSM/WCDMA/LTE auto). Anyone? Thanks!!
Click to expand...
Click to collapse
Unfortunately my sim is 4g-enabled. Hopefully someone sees this thread and helps you out
MY Sim is Not Even 3G it gsm and old as hell and the phone has the option of LTE but you need to now i had it in 4.1.2 stock and in ARHD 11.5 i lost it and in ARHD 12 it's back
Ok, thanks!! I will try a custom rom and see if it will show. Thanks
Edit:
Just tried another Sim card and now is all working!!! So it was a Sim problem. Anyway Thank for your Help!!
Hi,
I have done some searching on the forums and found related questions to this, but no answer that fixes my problem.
I have been using a Samsung Ativ S T899M for about 2 years now, originally a phone from Rogers Canada that my work bought, imported into the US on AT&T through Expansys. I actually live in Canada though and use it on Rogers.
We bought these phones with WinPho 8.0 on them, and configured them originally to use the APN WAP.CINGULAR and they connected just fine to Rogers Network, showing 3G, 4G and LTE connectivity for the last 2 years. When I go to the US for work, I switch it to 'Automatic' network connection and I get connectivity just fine. Even through various updates to Windows Phone 8.1, including the Developer Preview.
I recently reset my phone due to formatting issues with an SD card, and reset everything, restoring from a backup:
OS Version: 8.10.14176.243
FW Rev: 2212.12.11.2
HW Rev: 15.3.1.0
Radio Software ver: <blank?>
Radio Hardware ver: <blank?>
I reset the phone, and only 3 days later was I prompted to update to the above versions, although I checked for updates shortly after the reset.
Now to the problem: I no longer see LTE as a connectivity option when connecting to Rogers Network, AND I don't have Internet connectivity, even when choosing 4G. (I realize this might be 2 diff problems)
In the Settings --> 'Cellular+SIM' --> 'SIM' menu, I see only 2G, 3G and 4G in the highest connection speed..no LTE as there was before.
When I search for networks, I see Rogers at 2G, 3G and 4G, no LTE.
I have the APN set to WAP.CINGULAR and have also tried fast.t-mobile.com as advised in some other forum posts, with no luck.
I have the diagnostics app installed (*#634#) and have dialed into the Test Mode menu using *#0011# and tried to follow the codes to get to the UTMS mode menu, but it does not work. Tapping Back twice does nothing whatsoever.
Does anyone have a similar experience? Am I missing the Radio drivers I need? How do I correct this?
Any help / advice / tests are appreciated.
I have this phone as well. Its unlocked from Bell Canada. I made the same mistake and upgraded it to 8.1 DP, I since bought a Nokia Lumia 635 that I use as my daily driver, as there are soo many bugs with the T899M now using the 8.1DP. When I was using it I noticed that missing LTE from the settings as well, but every now and then my phone would tell me I was connected to LTE in the status bar.
I really wish there was a way to restore this phone back to the original factory firmware 8.0....well I'm sure there is, but for some reason there simply is no ROM online to do so. Very unfortunate for us T899M owners who did the 8.1 DP update.
The missing radio HW & SW lines are because Samsung needs to update the firmware, some of the hardware is missing proprietary drivers (radios/camera, etc), unfortunately everytime I contact Samsung they tell me the same thing. "You cannot downgrade, it is not possible. We will let you know when an update is available".....basically the're no help.
Alls we can do is wait....one day it maybe updated...who knows when though...apparently not Samsung.
4G is LTE. I set my highest setting to 4G and in the top corner it shows LTE. 8.1 DP latest
Hi guys, I'm new to the forum and I live in Venezuela, I get the following thing I bought a blu r1hd of 16 gb on amazon, I got the computer and configured it to update to version 7.4.2, my sim Card is 3g, but then of the update marks me to 4g and the signal goes up and down, I have no connection to the internet or calls even having signal, suddenly changes to 3g and that's when I enter data and calls
The problem is that I really do not know what to do.
I hope, guys help me :crying:
rubensmuj said:
Hi guys, I'm new to the forum and I live in Venezuela, I get the following thing I bought a blu r1hd of 16 gb on amazon, I got the computer and configured it to update to version 7.4.2, my sim Card is 3g, but then of the update marks me to 4g and the signal goes up and down, I have no connection to the internet or calls even having signal, suddenly changes to 3g and that's when I enter data and calls
The problem is that I really do not know what to do.
I hope, guys help me :crying:
Click to expand...
Click to collapse
if you are sure it is the 4g as problem , you can .
1. settings
2. under wireless &networks section , select "more"
3. cellular networks
4. preferred network type
5. change selection until it is better (hopefully it helps)
mrmazak said:
if you are sure it is the 4g as problem , you can .
1. settings
2. under wireless &networks section , select "more"
3. cellular networks
4. preferred network type
5. change selection until it is better (hopefully it helps)
Click to expand...
Click to collapse
Ok I change it but it only gives me these options
Preferred network type
2g / 3g / 4g lte
2g / 3g / 4g
3g / 4g
2g only
If I put it in 2g only, it allows me to make calls
The problem of the update is that I add a new option called
4G LTE MODE IMPROVED when turning off the signal