Related
Hello everyone! I just took the plunge and ordered my Note from Amazon. I am a former Dell Streak/DJSteve user who has been forced to use the Samsung Infuse with MIUI for the past 6 months and I could NOT be happier about the Note.
When it arrives tomorrow, what are the steps I should take to ensure maximum compatibility with AT&T's network/speeds? What configurations settings should I modify? Lets start an AT&T optimization thread .
I anticipate rooting the device as soon as I turn it on - any suggestions for a custom ROM/Radio while you are at it?
Thank you all in advance for the tips AT&T users!
I'm another refugee from the Dell Streak 5, for which DJ Steve could do only so much. You'll like the Note much better.
I can't comment on rooting. Let me start the ball rollling on getting you going on AT&T.
I popped into my Note the SIM I was using on my Streak. Others can correct me if I'm wrong, but you don't need a special "4G SIM" since the Note is not an LTE phone.
Next relates to your plan. Your post doesn't say what it is. I'm on a metered 4G Smartphone plan. Others have grandfathered unlimited plans. In any event, you need a compatible plan. The one you had for the Streak (assuming it was on AT&T) should work.
Third is the APN. There are a ton of posts in this forum on this issue. The wap.cingular APN works fine (if you can't find configuration I can point you to a link) but it is only 3G. You want the phone APN for HSPA+. But ... you need to be properly provisioned for that APN. Just having the SIM and the plan aren't enough.
if you call customer service, when they look up your IMEI, you won't be provisioned for the phone APN, just wap.cingular. (You can tell by the SOC for your data plan but that is a whole another discussion). Call tech support, nicely explain the situation. You'll need to give them an IMEI from an AT&T 4G phone. I used the IMEI for the Infuse (easily findable through a Google search). The tech then could provision me for the phone APN (if you can't find configuration I can point you to a link). I wrote here about this experience on my blog, and the AT&T tech even responded with a comment!
Hope this helps.
GenghisKhent said:
Third is the APN. There are a ton of posts in this forum on this issue. The wap.cingular APN works fine (if you can't find configuration I can point you to a link) but it is only 3G. You want the phone APN for HSPA+. But ... you need to be properly provisioned for that APN. Just having the SIM and the plan aren't enough.
Click to expand...
Click to collapse
If you're grandfathered into an unlimited plan, stick with the wap.cingular apn. The newer apn's are regulated much more closely. You'll still get HSPA+, but your speeds probably won't go much higher than about 6mbit at best, which is more than enough for most things really.
The other thing to do is disable fast dormancy. From the dialer, enter in *#*#9900#*#* and disable fast dormancy.
Jade Eyed Wolf said:
If you're grandfathered into an unlimited plan, stick with the wap.cingular apn. The newer apn's are regulated much more closely. You'll still get HSPA+, but your speeds probably won't go much higher than about 6mbit at best, which is more than enough for most things really.
Click to expand...
Click to collapse
If you are metered rather than unlimited (can't tell from your post) I would think regulation would be a non-issue as you pay through the nose if you go over your limit. Also, I believe that theoretically the phone APN has a higher HSPA+ limit than the wap.cingular APN. Nevertheless, in practice my experience so far (in the Los Angeles area) is that the phone APN and the wap.cingular APN have similar speeds. So even if you are metered, you might want to skip going through the bother of provisioning to the phone APN as long as your speed is OK for your purposes on wap.cingular.
Jade Eyed Wolf said:
The other thing to do is disable fast dormancy. From the dialer, enter in *#*#9900#*#* and disable fast dormancy.
Click to expand...
Click to collapse
Definitely good advice. I forgot that one.
I'm on grandfathered data and have never noticed speed differences between the APN settings floating around on the net. It's not a 4G phone, so at max, any APN will give HSDPA+ (i.e. fake 4G) speeds any way you slice it.
I'm just using wap.cingular and it works well enough.
ericshmerick was the guy who got AT&T to recognize the GTN-7000 as a phone so we could have voice + data. When I called AT&T yesterday and gave them my Note's IMEI, they knew it was a phone, not a tablet. We all owe ericshmerick a lot of thanks, since now all we have to do is pick and choose among APNs, as opposed to dealing with AT&T trying to kick us off the voice network.
GenghisKhent said:
ericshmerick was the guy who got AT&T to recognize the GTN-7000 as a phone so we could have voice + data. When I called AT&T yesterday and gave them my Note's IMEI, they knew it was a phone, not a tablet. We all owe ericshmerick a lot of thanks, since now all we have to do is pick and choose among APNs, as opposed to dealing with AT&T trying to kick us off the voice network.
Click to expand...
Click to collapse
+1
Indeed! Major kudos to Eric ^_^
Jade Eyed Wolf said:
+1
Indeed! Major kudos to Eric ^_^
Click to expand...
Click to collapse
Thanks guys. It's hard to take credit for something that was broken to begin with. I just emailed and called a few people who probably wondered how I found their information (google is amazing).
But since AT&T has fixed their issues, we can all celebrate and use this awesome smartphone as it was designed.
Enjoy!
So I'm on a 2GB a month plan. Is wap.cingular ok or should I change it? If so, change it to what? And what does dormancy do?
Just got mine around lunch from UPS, threw the battery in just to
fire it up. WOW! Screen is clear as a bell & bright.
Mine came from Germany via Amazon. Sealed Note box, inside a box
with the adapter & instructions to set it to English.
It will get all setup tonight.
Namuh said:
So I'm on a 2GB a month plan. Is wap.cingular ok or should I change it? If so, change it to what? And what does dormancy do?
Click to expand...
Click to collapse
On the 2GB plan, you should use the Phone apn. You'll get the best speeds that way. Just do a search for the correct settings on the Phone apn, and make sure that your account is provisioned for 4G. I believe you need to make sure that it using the "HSDPB" SOC code.
As for fast dormancy, you should disable that by entering *#*#9900#*#* in your dialer and disabling it from the menu that comes up. Basically, fast dormancy is a feature that some networks use in order to more quickly transition from an idle UMTS state all the way up to HSPA+ and back to idle again (when the connection isn't being used for a period of time). The idea behind this feature is to a) conserve battery life on your device and b) more efficiently scale and distribute available bandwidth between you and the cell tower. However, as AT&T does not use this feature on their network, having it enabled on your device can have a negative effect on your battery life in addition to making your data connection more erratic and generally slower (because there's wasted overhead being transmitted). The effect of disabling fast dormancy while on AT&T is that you'll notice the initialization time for your connection from idle to active will be slightly longer, but once active, it will stay at the highest available transmission rate (HSPA+) for longer before going back to idle instead of rapidly going between 3G, H, and H+ all the time.
Jade Eyed Wolf said:
On the 2GB plan, you should use the Phone apn. You'll get the best speeds that way. Just do a search for the correct settings on the Phone apn, and make sure that your account is provisioned for 4G. I believe you need to make sure that it using the "HSDPB" SOC code.
Click to expand...
Click to collapse
I'm not positive, but I believe that SOC code is for unlimited plans. Mine is a metered plan, and my new SOC code is HSSMT7. Once my SOC code changed to that, I was able to access the phone APN. Before I could not.
I'm curious if anyone else with a metered plan can confirm the different SOC code.
GenghisKhent said:
I'm not positive, but I believe that SOC code is for unlimited plans. Mine is a metered plan, and my new SOC code is HSSMT7. Once my SOC code changed to that, I was able to access the phone APN. Before I could not.
I'm curious if anyone else with a metered plan can confirm the different SOC code.
Click to expand...
Click to collapse
I'm on the 2GB Smartphone plan for 4G and my code, assuming I'm looking in the right place in my bill, is HSSM. I had to view my data plan details for my prior month billing to find it. But, I'm not sure that's the correct code because nowhere do I see the acronym SOC.
In any case, I'm using the "phone" APN settings and I get 6.6 down and 1.0 up.
QuarterToNine said:
I'm on the 2GB Smartphone plan for 4G and my code, assuming I'm looking in the right place in my bill, is HSSM. I had to view my data plan details for my prior month billing to find it. But, I'm not sure that's the correct code because nowhere do I see the acronym SOC...
Click to expand...
Click to collapse
I view my SOC code by the following method which I learned somewhere on this incredibly useful forum:
1. Log on to my AT&T Wireless account.
2. Choose Manage Features.
3. On the next displayed page, find and choose the hyperlink to your data plan. Mine is called DataPro 2 GB for Smartphones on 4G.
4. On the resulting popup window, take a look at the URL, particularly the end, which shows the SOC code. My URL ends: olamexecute?selectedFtrSoc=HSSMT7
Admittedly this roundabout way of viewing your SOC code is sort of like driving from LA to SF by way of NY. Reportedly there is an easier way viewing your data details, but if that alternative works, I can't figure out how to use it. Perhaps one of the countless more knowledgeable people on this forum can chime in.
FWIW, the very helpful AT&T tech who helped me provision my account so I could use the phone APN told me that the actual SOC code wasn't that critical, there were several that would get me to where I wanted to go (the HSPA+ fast lane).
Hope this helps.
GenghisKhent said:
I view my SOC code by the following method which I learned somewhere on this incredibly useful forum:
1. Log on to my AT&T Wireless account.
2. Choose Manage Features.
3. On the next displayed page, find and choose the hyperlink to your data plan. Mine is called DataPro 2 GB for Smartphones on 4G.
4. On the resulting popup window, take a look at the URL, particularly the end, which shows the SOC code. My URL ends: olamexecute?selectedFtrSoc=HSSMT7
Admittedly this roundabout way of viewing your SOC code is sort of like driving from LA to SF by way of NY. Reportedly there is an easier way viewing your data details, but if that alternative works, I can't figure out how to use it. Perhaps one of the countless more knowledgeable people on this forum can chime in.
FWIW, the very helpful AT&T tech who helped me provision my account so I could use the phone APN told me that the actual SOC code wasn't that critical, there were several that would get me to where I wanted to go (the HSPA+ fast lane).
Hope this helps.
Click to expand...
Click to collapse
Thanks! I'm on HSSMT7. Also, it's good to know that the SOC code isn't that critical. Thanks again.
QuarterToNine said:
Thanks! I'm on HSSMT7. Also, it's good to know that the SOC code isn't that critical. Thanks again.
Click to expand...
Click to collapse
You're welcome. One caution. I'm relating what the AT&T tech told me (about the actual SOC code not being that critical). He seemed knowledgeable as well as helpful. But I can't 100% confirm. Though after his change I had no problem accessing the phone APN.
QuarterToNine said:
I'm on the 2GB Smartphone plan for 4G and my code, assuming I'm looking in the right place in my bill, is HSSM. I had to view my data plan details for my prior month billing to find it. But, I'm not sure that's the correct code because nowhere do I see the acronym SOC.
In any case, I'm using the "phone" APN settings and I get 6.6 down and 1.0 up.
Click to expand...
Click to collapse
Good point. I hadn't thought of that.
Hmm thats weird my code is olamexecute?selectedFtrSoc=LTESMT2....I used my wifes APN settings from her skyrocket and I get way faster download results in speedtest from 1.92mbs to 6.0mbs, but it times out in the upload phase of the test. MMS works, text works, phone calls work and internet works. I'm gonna try the "phone" apn settings next. Her skyrocket APN name is ATT pta. We don't have 4g LTE in our area yet. I'm on the 2GB 4g LTE data plan (I had a skyrocket too and returned it) and so is she. I also have AT&T's LTE provisioned SIM card in my Note kept over from my skyrocket. Should I call tech support and have my IMEI provisioned for HSPA+?
Namuh said:
Should I call tech support and have my IMEI provisioned for HSPA+?
Click to expand...
Click to collapse
Namuh, I'll let better minds than mine answer that. My advise is to hold off until you get those answers. Once you go back you may never go back, if you know what I mean.
On the phone with tech support. My account is provisioned for 4G Hspa+. under a different imei number than the note though. They did give me the option to replace the imei number that is on my account with the Notes imei number. Not sure what to do. She told me that her supervisor told her that the only apn settings she could give out is wap.cingular because its an international phone. But wap.cingular only gives 3g speeds right? I'm in an Hspa+ area. I'm off the phone with tech support. I'm going to wait on a reply in this thread or other threads to see if I should have them apply my Notes imei to my account.
Anyone else on AT&T unable to get LTE? The APN settings that auto-downloaded are correct according to AT&T's documentation, but I'm only getting H+.
Your GPRS could be disconnected. I'd you use app advanced signal status you can look at settings Beyer to see if your set up correctly
MasterBrick SCH-I545 Galaxy S4, XdA mobile app...
I had to use my girlfriends IMEI for her Nexus 5 for it to pick up LTE. Before that, I was only getting H+. Try to get an IMEI of another ATT LTE Android phone and it should do the trick!
Can't get LTE to work
I need some help. I have the new, unlocked, Sony Xperia Z3 Compact and I can't get on the AT&T LTE network as well. Here are the steps I have taken:
The Setup
I have a Samsung Galaxy S4 that is on the LTE network with no problem
My AT&T account had a Lumia 820 device tied to my account (and old device of mine) and it worked fine for LTE on all of my future pones, including my S4
I purchased an unlocked D5803 Z3c from Handtec
My Activate Attempt
Went to the AT&T store to pick up a new nano sim card
I gave my new (Sony) IMEI number to the AT&T rep (stupid move, clearly) and they loaded it under my account
With the new sim, my Z3c could place calls and send/receive text messages
Data would not work
My Resolution Steps
I looked up APN settings online and tried several different variations
The HSPA+ Cingular APN settings worked, but left me without LTE service
I could not get the mobile.att.net APN and LTE settings to work
Reading Android Central and XDA, I discovered that others had this issue as well
Using forum advice, I called AT&T
The AT&T rep did confirm that my Sony IMEI number was registering as a "2G" phone, which is why I did not get LTE access
I put one of my extra LTE device IMEI numbers on my account
My phone still won't connect to the LTE network
I notice that even though they registered an LTE phone (and they confirmed it came up LTE), my AT&T account page shows an old flip phone silhouette
The rep noted that there was nothing else they can do...so I basically have to deal with it
I'm posting on XDA to leverage the wisdom of this crowd
I remain confident that this will get resolved, yet frustrated at the same time
I'm at a loss and wonder if I have to activate this nano sim in another supporting device or the like. Thoughts?
Thanks in advance for your help.
No clue, but AT&T tech support confirmed that my IMEI is registered and my previous two devices were all LTE devices. I have no idea what's going on either.
lolstebbo said:
No clue, but AT&T tech support confirmed that my IMEI is registered and my previous two devices were all LTE devices. I have no idea what's going on either.
Click to expand...
Click to collapse
Are you having the same issue? Do you see the cartoon sketch of a flip phone in your account as well?
What you have to do is give them the imei of an LTE capable phone. It absolutely does not matter that you will not actually be using that phone.
If you already have an LTE phone, just switch your SIM to your z3 when it arrives. It is absolutely unnecessary to call AT&T with your new IMEI. Anything AT&T tells you to the contrary is flat out wrong.
Issue resolved!
Bottom line...do not give these clowns your Xperia IMEI number.
When they entered the IMEI number it flipped my data plan from a grandfathered unlimited plan to a pay-per-use plan with no LTE (why they couldn't figures this out last night, it beats me). He was talking about my wife's plan and her unlimited data. I then noted "mine is unlimited too" and then said it wasn't. You can only imagine how things went from there.
The unrecognized IMEI number automatically switched me off of my plan.
They have me on a temporary 3GB plan, as the support rep couldn't get me back on the unlimited plan. They have to send the change to their back office team and it will take a week to get it back.
My phone now has the 4G icon versus H+.
Sent from my D5803 using XDA Free mobile app
ktcred said:
Are you having the same issue? Do you see the cartoon sketch of a flip phone in your account as well?
Click to expand...
Click to collapse
Nope, it actually still shows my previous LTE-capable phone.
I actually also initially had this issue ; I was sitting in the AT&T &T store on the phone with tech support until the sales rep realized my phone wasn't showing up in the system as an LTE device. He input a bogus LTE IMEI for me, after which I restarted my phone. It's been working for me since then
Whelp, I guess I'll go to the AT&T store again later, then.
So everything that is claiming to have LTE ----> Do you have a 4G icon on your phone or LTE? I am in US, went to ATT store ---they entered an imei of a Samsung Galaxy S5 and now it shows 4G. If you go into mobile networks preferred network mode it says 4G preferred/wcdma/gsm. I am assuming this is just due to the UK software version not being the same as US...
macklobell said:
So everything that is claiming to have LTE ----> Do you have a 4G icon on your phone or LTE? I am in US, went to ATT store ---they entered an imei of a Samsung Galaxy S5 and now it shows 4G. If you go into mobile networks preferred network mode it says 4G preferred/wcdma/gsm. I am assuming this is just due to the UK software version not being the same as US...
Click to expand...
Click to collapse
Says 4G. I think we are good
Sent from my D5803 using XDA Free mobile app
IMEI problem rectified, they reverted it to my previous phone's IMEI. Now displaying 4G. Sweeeeeetness.
It's just silly that AT&Ts LTE is tied to the IMEI in their system and not simply having an LTE capable phone.
I ported a line to use with my Z3c and gave them the IMEI of an AT&T HTC One so that LTE would work, but they would only send me a micro sim because according to the IMEI that's the sim I need. Tried to tell them I need a nano sim but the gal on the phone said she couldn't send one, I'd have to go to a store pick one up.
If you are going from an LTE phone that uses a nano SIM card to the Sony Xperia Z3 compact, it is not necessary to contact AT&T. You will need to manually add the APN settings on your Sony Xperia Z3 compact. Here is the path to get to the APN settings..
Settings > More > Mobile networks > Access Point Names > press + to add a new APN
Enter in the following settings listed below
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC http://mmsc.mobile.att.net
MMS proxy proxy.mobile.att.net
MMS port 80
MCC 310
MNC 410
Authentication Type None
APN type default,mms,supl,hipri
APN protocol IPv4
Bearer Unspecified
Save the changes you made, select the APN you just created and reboot the phone. Everything should be working from there.
Here is where I got the information from: http://www.att.com/esupport/article.jsp?sid=KB424489&cv=820&_requestid=838329#fbid=ecLfo9YLvXa
So I do have the 4g icon in my status bar. Does this mean that LTE is working fine?
The only reason I am asking is because on the MY ATT page I do only see the silhouette of a flip phone.
Edit: My phone automatically downloaded internet and MMS settings when I first booted it up. Is this what others are doing?
Alex2x3 said:
So I do have the 4g icon in my status bar. Does this mean that LTE is working fine?
The only reason I am asking is because on the MY ATT page I do only see the silhouette of a flip phone.
Edit: My phone automatically downloaded internet and MMS settings when I first booted it up. Is this what others are doing?
Click to expand...
Click to collapse
Yes, you are getting LTE on your phone
LTE = 4G in Europe
4G = H+ in Europe
3G
etc
If you do a speed test, you will see that you are getting LTE speeds on your phone
Problem here too. I just went in to get a nano sim. The guy hooked up my number from a note 2. Does not show data. He said I needed to put in my IMEI number from the box. I didn't from recommendations on here. The problem is that I didnt have a rebutle sp? Because I really don't know how it works. He said if my note 2 was lte, it should work. I don't know what the heck to do
Notchr302 said:
Problem here too. I just went in to get a nano sim. The guy hooked up my number from a note 2. Does not show data. He said I needed to put in my IMEI number from the box. I didn't from recommendations on here. The problem is that I didnt have a rebutle sp? Because I really don't know how it works. He said if my note 2 was lte, it should work. I don't know what the heck to do
Click to expand...
Click to collapse
I would try again, maybe try to get a different service rep. The IMEI from an AT&T Note 2 should work.
This is not mine, I take no credit, Mayrer has done most of the hard work for us, you credit him for his work and everyone he has worked on to get your Sprint to working for GSM.
http://forum.xda-developers.com/spri...nlock-t3229801
I have only updated the information for changing in hidden menu and PropEditor. I also credit the maker for the CDMA to GSM Patch, Mentor.37 for his work and everyone else who has helped him.
http://forum.xda-developers.com/showthread.php?t=2394689
I do not know if this will work for any other Sprint phone not on ZV6
Bands 2, 4, 12 are for bands T-Mobile.
Download PropEditor and edit these settings....Don't forget this step first!!
ro.build.target_operator=SPR => TMO
ro.build.target_country=US
ro.telephony.default_network => 9
telephony.lteOnCdmaDevice => 0 ....don't forget to save and reboot.
Along with Hidden Menu 5689#*991# to change your APN settings properly and set
Field Test => Modem Settings =>
PDP Setting => [5] APN Setting ...... now you have to select the bottom one then go into menu [ ] press until you see delete APN
you must do this because a bug I am seeing only allows the bottom APN setting to be used, I usually delete all until the APN I use is on the very bottom selection. no go back
Network Mode = Automatic => go back => RAT Selection = GSM/WCDMA/LTE auto
LTE Band Selection doesn't work proplerly so installing the modded Shortcut Master (Lite) from the link above be sure to go to
lotHiddenMenuMain (witout root) => LTE setting=> LTE Data Roam Config....and enable
Bar Roam Forced
Bar Roam Enabled
Roam Guard Forced
Roam Guard Enabled
Band 2
Band 4
Band 12 go back
Band 25 should be disabled unless you can use it. You cannot really set APN here.
I sometimes install the CDMA to GSM patch for global phones but I then have to re-do the PropEditor settings again, but it may be able to configure anything else that is missing, you can try to Adb Sideload the zip or use FlashGordon app to try to install, honestly I don't know if either worked for me for the patch.
This is what I configure to get my phone to working with T-Mobile.
I only submit this, I cannot provide support, you can always add on to anything else I may have missed or messed up, thank you.
Has anybody with an LG G4 rom version ZVG been able to successfully get their phone working on T-Mobile?
My phone is paid off and Sprint sent the domestic SIM unlock code. When the TMO sim is in and the phone's network mode is set to Auto, and and APN is manually entered per TMobile's specs, the phone can connect to the network and make calls, send SMS, connect to EDGE data, and sometimes send MMS, but it never connects to LTE. If I change the network mode to LTE/CDMA, the phone doesn't connect at all.
I read elsewhere to try change the "Bearer" field in the APN to "LTE" but that field is not displayed or editable in the APN input/edit screen. I tried a bunch of the Shortcut Master (Lite) or similar ways to expose the hidden menus to edit the full APN but they all fail due to permissions (because of ZVG version?). Shortcut Master (Lite) says it would work if upgraded to the paid Secret Codes version, can anybody verify that before I pay?
Or, any other suggestions to get this fully working with LTE or can even confirm that this is possible?
guys this is kinda old news
the build prop also is better set from
ro.build.target_operator=SPR => OPEN
then xposed modules such as android theme and such work.
but great find on thew band settings
ive been running my g2 g3 and g4 on tmobile and att and its subsidiaries for a long times now
and the g series sprint phones have been the best at taking to other networks due to the sprints already supporting most of the bands`
---------- Post added at 08:43 AM ---------- Previous post was at 08:43 AM ----------
request for modderators to move this thread to the general area
i also thin the mellow mallow international roms go up to zvb which should work on tmobile and i can verify att networks
Doesn't the phone need to be rooted for the build prop to be edited?
And as far as I can tell, there isn't a root for a G4 on ZVG firmware?
Basically, to start with, can anybody confirm if a LS991 ZVG can be made to work on TMobile without root, or if there is a good rooting method, where is it?
Thanks.
cko said:
Has anybody with an LG G4 rom version ZVG been able to successfully get their phone working on T-Mobile?
My phone is paid off and Sprint sent the domestic SIM unlock code. When the TMO sim is in and the phone's network mode is set to Auto, and and APN is manually entered per TMobile's specs, the phone can connect to the network and make calls, send SMS, connect to EDGE data, and sometimes send MMS, but it never connects to LTE. If I change the network mode to LTE/CDMA, the phone doesn't connect at all.
I read elsewhere to try change the "Bearer" field in the APN to "LTE" but that field is not displayed or editable in the APN input/edit screen. I tried a bunch of the Shortcut Master (Lite) or similar ways to expose the hidden menus to edit the full APN but they all fail due to permissions (because of ZVG version?). Shortcut Master (Lite) says it would work if upgraded to the paid Secret Codes version, can anybody verify that before I pay?
Or, any other suggestions to get this fully working with LTE or can even confirm that this is possible?
Click to expand...
Click to collapse
paid version aint got nothing to do with it its a sprint thing have u tried the uicc unlock id call srint back and tell them and ask about it sprint still hast apns locked down shortcutmaster is free and does all u need in that area
sprint should still have to suport the device as it has been paid off and unlocked as per their policy and they havnt fully unlocked it like they claim
TheMadScientist420 said:
paid version aint got nothing to do with it its a sprint thing have u tried the uicc unlock id call srint back and tell them and ask about it sprint still hast apns locked down shortcutmaster is free and does all u need in that area
sprint should still have to suport the device as it has been paid off and unlocked as per their policy and they havnt fully unlocked it like they claim
Click to expand...
Click to collapse
Can you be more specific on what I need to ask Sprint about? Like I said, I asked for the the Domestic Sim Unlock and they sent that over the air and a confirmation showed up on the phone. It does not reject the T-Mobile SIM like it would normally, so something has changed from the default state.
Still looking for confirmation from somebody that has successfully connected their ZVG LS991 to TMO after a Domestic Sim Unlock.
cko said:
Can you be more specific on what I need to ask Sprint about? Like I said, I asked for the the Domestic Sim Unlock and they sent that over the air and a confirmation showed up on the phone. It does not reject the T-Mobile SIM like it would normally, so something has changed from the default state.
Still looking for confirmation from somebody that has successfully connected their ZVG LS991 to TMO after a Domestic Sim Unlock.
Click to expand...
Click to collapse
so its accerpting the sim but apns are still greyed out where u cant edit them
need to ask sprint for the msl of this device so u can attempt to edit the apns it may take a few calls but most of the time if u keep ure cool and keep trying they will eventually give it to you
tell them the situation u paid it off they sent u the unlock code but are still unable to edit the apn without the msl
I am uncertain which information is true or false, but thought I would ask here. I realized I may be missing a few features when I bought the unlocked Note 8. However, I was under the impression that I could somehow enable things like HD voice and Video Calling.
If I am able to do this, can someone provide a link to a guide I can follow for the Note 8? I realize there are third party apps. But, I was hoping to achieve the above naively.
I'm Currently with AT&T, but prefer the ability to Hot-Spot by using an unlocked version of the Note. Hopefully someone who has enabled this can chime in.
I currently have an ATT Note 8 and I have a similar question. I want to flash the unlocked firmware so I can use it on T-Mobile. I've looked online and couldn't find an answer hope someone here can help us.
So my understanding is that AT&T only allows things like HD Voice, Video Calling, VoLTE, Wi-Fi Calling, etc. On their branded device's. It's why I actually didn't get the unlocked device even though I previously had a Note 7.
fireguy0306 said:
So my understanding is that AT&T only allows things like HD Voice, Video Calling, VoLTE, Wi-Fi Calling, etc. On their branded device's. It's why I actually didn't get the unlocked device even though I previously had a Note 7.
Click to expand...
Click to collapse
This was my understanding as well, but, I thought someone came up with a clever way of enabling these features. Hot spot and the ability to jump carriers were more important features than the others... which is why I went with unlocked. Am stuck in an unlimited data plan with AT&T for one more year. Unfortunately, they don't allow any kind of hotspot with unlimited plan.
Since the phone just became available and only to few people (BTW I'm still waiting), you guys have to wait , because since all those are hacks, phones have to get to right hands and then may take some time to figure things out, unless any of you have enough knowledge, then head to S8/S8+ forum and try using those solutions on your Note 8, may even work.
When I booted my Note 8 with T-mobile sim card, it applied some carrier customization and enabled VoLTE and WiFI calling but video calling is missing which I don't use much anyways.
You can usually do this via the service modes:
Dial *#0011# may work
Press the Menu key and then Back
Press Menu again then Key input and enter the value 1.
Wait a little
Press Menu and then Back
Press DEBUG SCREEN
Press WB-AMR SETTINGS
Press WB-AMR ENABLE
This use to work on previous models.
(In the UK being shafted by a long wait for my Note 8)
I thought many of the methods wouldn't work since AT&T uses whitelists on their system and it's not just the features are missing from the OS.
I tried the *#0011# and was able to get all the way to debug. That screen or option is not showing up on my unlocked note 8.
Ryya said:
You can usually do this via the service modes:
Dial *#0011# may work
Press the Menu key and then Back
Press Menu again then Key input and enter the value 1.
Wait a little
Press Menu and then Back
Press DEBUG SCREEN
Press WB-AMR SETTINGS
Press WB-AMR ENABLE
This use to work on previous models.
(In the UK being shafted by a long wait for my Note 8)
Click to expand...
Click to collapse
I know the S8 crowd has been flashing the carries specific CSC/CP files through a modified ODIN on top of the UNLOCKED firmware. I'm sure this will work on the note 8 as well. The modem should enable all the carrier specific bands and the CSC should enable the wifi calling and VOLTE. on a side note, check in the settings menu for the wifi calling. when I flashed the T mobile CP over the U firmware, I did not have a WIFI calling quick toggle but I did have wifi calling the in the regular settings menu. I had to toggle it on and off that way.
No where to be found for VZW on unlocked
Wi-Fi Calling is in the phone settings on the unlocked version...I have not seen HD or video though...WiFi calling works awesomely
BlueFox721 said:
Wi-Fi Calling is in the phone settings on the unlocked version...I have not seen HD or video though...WiFi calling works awesomely
Click to expand...
Click to collapse
You on AT&T or T-Mobile?
JameyS said:
This was my understanding as well, but, I thought someone came up with a clever way of enabling these features. Hot spot and the ability to jump carriers were more important features than the others... which is why I went with unlocked. Am stuck in an unlimited data plan with AT&T for one more year. Unfortunately, they don't allow any kind of hotspot with unlimited plan.
Click to expand...
Click to collapse
Are you on an old grandfathered in AT&T unlimited plan? I have a new Unlimited plan and they offer lots of goodies including a 10GB/month hotspot for each phone.
Check them out: https://www.att.com/plans/unlimited-data-plans.html
You should not be stuck in any plan now for a year or any time frame. Change when you want to change.
Here's a link to information for Flashing the Unlocked Firmware and Carrier Switching on the Snapdragon S8+ (no rooting necessary). https://forum.xda-developers.com/galaxy-s8+/how-to/carrier-switch-snapdragon-t3615680
Probably going to be similar with our Note 8s.
Im on Verizon and I cant see wifi calling or HD voice aka VOLTE. Maybe we just need to wait.
This may help for people looking for video calling
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-to-enabling-video-calling-t3670523
skinnytoo2 said:
No where to be found for VZW on unlocked
Click to expand...
Click to collapse
I had to download the app "shortcut master". Navigate to to IMS Settings, click RCS Configuration and enabled everything. I also can see the WB settings under "DM Configuration" under the IMS settings but they are relabeled as xxx_WB and instead of enabled/disabled, it is a 0 or 1. I believe the 1 is enabled. Probably need to restart as well but I am uncertain.
The outstanding question I have is do I need to change HD_VOICE under the DM configuration from a 0 to 1 as I see that there as well.
lebodano said:
I had to download the app "shortcut master". Navigate to to IMS Settings, click RCS Configuration and enabled everything. I also can see the WB settings under "DM Configuration" under the IMS settings but they are relabeled as xxx_WB and instead of enabled/disabled, it is a 0 or 1. I believe the 1 is enabled. Probably need to restart as well but I am uncertain.
The outstanding question I have is do I need to change HD_VOICE under the DM configuration from a 0 to 1 as I see that there as well.
Click to expand...
Click to collapse
I downloaded the shorcut master. However when i try to change anything, it says SU: not found. I also saw in there about the HD voice enabled. But am not able to launch any type of editor. I have the note 8 unlocked version, using straight talk sim card on verizon towers. I would love to be able to talk on the phone and surf the internet at the same time.
anyone able to get this working on the unlocked version?
I have video calling & HD Voice working on unlocked model with VZW SIM on gUDP, I almost had WiFi Calling working; but broke video calling. I'm hoping to get both working; WiFi Calling works with T-Mobile SIM out of the box. I haven't messed with my AT&T SIM to see if any of the features work; but maybe this week I will.
WinDroidGuy said:
I have video calling & HD Voice working on unlocked model with VZW SIM on gUDP, I almost had WiFi Calling working; but broke video calling. I'm hoping to get both working; WiFi Calling works with T-Mobile SIM out of the box. I haven't messed with my AT&T SIM to see if any of the features work; but maybe this week I will.
Click to expand...
Click to collapse
How did you get video calling working. I still have yet to successfully place the call.
Anyone have the lg v40 running on at&t? surprisingly i have no options under mobile networking. I can only enable international data roaming and setup new apn. Usually i'd expect to see settings allowing me to change the bands.
Alibaba0101 said:
Anyone have the lg v40 running on at&t? surprisingly i have no options under mobile networking. I can only enable international data roaming and setup new apn. Usually i'd expect to see settings allowing me to change the bands.
Click to expand...
Click to collapse
Everything is auto- , the phone I have is locked to att and I guess the only way to change that is to unlock the phone.
mtyler7807 said:
Everything is auto- , the phone I have is locked to att and I guess the only way to change that is to unlock the phone.
Click to expand...
Click to collapse
thx, i flashed the unlocked firmware and still the same thing. looks like it keys everything off of the sim.
Alibaba0101 said:
thx, i flashed the unlocked firmware and still the same thing. looks like it keys everything off of the sim.
Click to expand...
Click to collapse
It bounces off 2 things, the phone's props and the network being detected. Using the unlocked does not enable settings if it's not natively supported by the carrier contrary to popular belief. That was true on older versions of android. Newer ones relies on multiple configs to decide what options you get to see or not. In most cases, if the phone model is not what is expected for a particular network, it will default to global roaming mode that has the least set of options. From what I've seen, this comes as a result of carriers requesting to have specifically designated models tailored to their service.
If you are rooted, you can tweak stuff in build.prop to have the phone switch carrier and regional modes.
Alibaba0101 said:
Anyone have the lg v40 running on at&t? surprisingly i have no options under mobile networking. I can only enable international data roaming and setup new apn. Usually i'd expect to see settings allowing me to change the bands.
Click to expand...
Click to collapse
root not needed:
1. for network mode, try dial *#*#4636#*#* and then phone information, this works on my v35 with tmo and att sim, you can also use a 3rd app called "network mode" which is a shortcut of the above, hope that works on v40 too.
2. for band selection, I use 277634#*# on v30(tmo unlocked) for both tmo and att sim; I use 277634#*# on v35 (both att unlock and usa unlock) for tmo sim; I use *#546368#*350# (need to dig into the menu to find band selection) on v35 (both att unlock and usa unlock) for att sim; hope either one of these two works for v40.