Ok--who wants a challenge?
I have corporate email that I am configuring active sync to automatically push to my Tilt. Everything works fine except my company has a policy that the phone must be locked with password protect. So now after it not being used for 1 hour I have to put in a password to gain access.
I checked in settings: lock: and the password check box is greyed so I can't change it. The max time the dropdown menu will go is 1 hour. So 2 part connection:
Is there a way to bypass this?
Is there a way to adjust to say 8 hours rather than 1?
volleykinginnc said:
Ok--who wants a challenge?
I have corporate email that I am configuring active sync to automatically push to my Tilt. Everything works fine except my company has a policy that the phone must be locked with password protect. So now after it not being used for 1 hour I have to put in a password to gain access.
I checked in settings: lock: and the password check box is greyed so I can't change it. The max time the dropdown menu will go is 1 hour. So 2 part connection:
Is there a way to bypass this?
Is there a way to adjust to say 8 hours rather than 1?
Click to expand...
Click to collapse
1. I don't know of a way to bypass this. There might be some sort of hack, but not one I know of.
2. If you Export your registry, then change the max time drop down and re-export your registry. Now diff the two files with a win diff program, such as WinMerge. The only difference should be the max time. See if you can hack in a bigger value.
Thanks
Dave
problem is that everytime you try to sync with your corporate email (which will be as items arrive if your talking about push), it will check the enforcement, if its not there it will prompt you that its going to enforce it again, just means that if your find a hack you will need to keep applying this hack unless you automate it....
That's what I thought...is there a hack to automatically apply the password. Where in the registry is the time...If I leave it named as "1 hour" but the actual time is say 10 hours...would that work?
there's a default sync policy thats set on the Exchange server. The only effective way to make this change is by editing that policy. There may also be legal ramifications for the company if the device is found to have been hacked to circumvent the autentication. Does the company need to adhere to Sarbanes/Oxley compliance?
grrrr....yes we are under Sarb Ox regs....I will have better luck winning the election than getting corp policy change...Any other software Ninjas that have an idea?
Where you're likely to end up is locked out once your IT department finds out your device is out of compliance.
Good point and I don't want that. Ok so I deleted off the server from active sync and soft reset but still have a grayed out password check box in the lock setting. Now that it's gone how do I go back to standard configuration? Please don't tell me hard reset.....
any software ninjas out there?
This may be a dumb way to go about it but maybe you should pose the issue to your IT department. I doubt that you are the only person who has email on his phone. Good luck.
ha ha...thank you captain obvious but IT will only support Crackberries at a VP level.
We have the same issue here at work. YOU HAVE TO SET A PASSWORD to your Tilt otherwise the email exch server wont let you ... .
Since you don't want to type it every single time:
<start> <settings> <lock>, set it to 12 hours and you should be fine.
If not, DELETE the outlook account (sure be NOT connected through active sync), soft reset the phone, set a password, soft reset again and re-establish the outlook account. Sync the first time "through the air" not USB, say YES to the security enforcement request and you should be fine.
As far as I know there's a new extension for enterprise mail server 2007 which can be enabled by your IT guys that it WILL ENFORCE password request on any connect - THAT you have to check with them.
since we are on the issue of password protection & exchange policies.
everytime I reboot my ppc tilt, I am prompted with the password to access the phone. I know this is for security purposes but it is annoying.
I use exchange on my tilt ppc for my phone that is through my own domain exchange account.
How can I disable password entry?
please advise.
tvos
I guess with xchg even with min. security settings there's no way to bypass the password after boot and sync with an xchg server. Simply use an easy PIN (4 numbers) and call it done. There are more annoying things in life for me...
i am sure there is a way, but just wondered if someone knew off hand as a quick post. i have a simple four digit password already....
tvos
volleykinginnc said:
ha ha...thank you captain obvious but IT will only support Crackberries at a VP level.
Click to expand...
Click to collapse
Then Tell Them I challenge them to an IT Technician Face off! Because if they are only supporting Crackberries, they are phonies!
Real IT People, like myself, Have all phones working IN harmony. Tilt, Crackberry, iPhones(shudder).
Using a registry editor (I use PHM), navigate to \hklm\security\policies\policies and look for the value name “00001023″. Change the data from ‘0′ to ‘1′
This will give you control back to set it how you please
Thank you thank you thank you thank you.....I was about 1 day away from a hard reset! Muuuuucho gracious that was sooooo irritating.
I'm on the other side of the fence here, being a PM who defined pin enforcement as a security requirement for implementation. I'm glad to see that there isn't a hack to get around this because we need this to prevent a SoX or FDA audit finding.
Inconvenient for the users, yes. But it has to balance against the companies IT security policy.
A possible workaround that we have shut down. Forward the mail you want to see on your device (high importance, specific senders, etc.) via outlook rules to a third party email (gMail, Hotmail, etc.) and then dload from there and kill your exchange sync all together.
my .02
there is a cab somewhere that is called "zenyee.com stay unlock" that is what I use. It seems to do the same as the registry hack posted above.
I had the same problem and it was really a headache until I found the file attached below. After installing it, go settings/lock and uncheck the "prompt if ..." box.
Hope it works for others
Hi all, I'm self employed and receive most of my work via email with the details in a pdf or doc file.
If at home I just transfer the details to calendar on my PC which syncs with my google calendar and then onto my note calendar. From the note calendar I can tap the location field and navigate to the customer with google maps and, if necessary, tap the contact number to call the customer easily while on route.
The problem is this requires manually typing the data from the document into the calendar. Easy on my PC but a pain in the butt if I'm on the road at the time.
Does anyone know of a way to automate this so I can do it easily from my note?
In summary I want to be able to get the job details into the calendar (stock at moment but not set in concrete), specifically the address into the location field and contact name and number into the description field.
Would it work if I got them to send out as a calendar invitation, I assume but don't know for sure, that they use outlook.
Sorry for the long drawn out question, I hope it makes sense. Any ideas greatly appreciated. Love using the note for my jobs but need to be able to streamline it's use when jobs come in on the road. At the moment I have to open the email, download and open the attachment, write down the details and either enter them into a diary event or type them directly into phone/navigation as appropriate. Not exactly high tech
Sent from my GT-N7000 using Tapatalk 2
cliver said:
Would it work if I got them to send out as a calendar invitation, I assume but don't know for sure, that they use outlook
Click to expand...
Click to collapse
imo the simplest solution would be if customers would send you invitations from google calendar - when accepted would automatically get into your note calendar,
Thanks p107r0,
I think it will also work if they create a diary event on their system and invit me as an atendee. In theory I then get an email invite which, if I accept it will populate my calendar.
Just messing with it myself and seems to work. I'll have to get my companies to try it out if I can convince them.
genious question, brilliant idea for an app, someone should make it
Sent from my GT-N7000 using Tapatalk 2
What if you did some sort of mashup where your clients go to a google hosted google apps page with a google spreadsheet that is acting as a form,
in this they can type the requirements.... and perhaps can select / type who they are (or perhaps type their UID which does a lookup to prevent data protection act) that has an action of add to calendar + email alert for you with the attached PDF that they select in the form?
I might have a look in to this myself as it seems kinda fun!
Edit: Found this example, that is kinda close
https://sites.google.com/site/drupa...usiness/apps-script-examples/calendar-service
Second edit
Perhaps http://www.jotform.com/ can help.
Thanks fooby, at moment I'm working on getting them to set up a calendar event and inviting me as an attendee as I think that will work with a few tweaks.
Trouble is getting them to play with me
Sent from my GT-N7000 using Tapatalk
I need to create an android app where the user info like (name,phone_no,address,personal_note) should be stored in my sql database on submitting. I need a real time notification when the user submits the data. I did some search on how to implement this and found we can use app-php-sql method. Where I can load the php script on my server which deals with the data coming from app and stores it in my SQL database. Is this reliable when there are like 50-100 requests per day ? And how to implement a real time notification on receiving the data in my database?
or should i go with PARSE ? someone suggested me to use parse and that it can handle all these issues and notify me on there dashboard.
I am a student and I have a project to create a app for reservation . My question is how to show the data according to my database.
Like a student login his account and how to show his profile information according to the database.
Is there any coding to add it to scrape the data from the database and show it on my application?
And I use the SQLiteDatabase for my database.
please some body help me... Thank you
Divide your work into steps, that is:
1. If you are keeping a database in a website then there should be a piece of code on the website which takes requests in form of username and password, and returns the data.
2. If you can't do this but the data is on the internet then the unsafe way would be to download the whole database and then authenticate and search using client side code (security experts will want to murder you, though).
3. If you are going to populate the data from scratch only using your application, then Firebase by Google is a good and free solution for student level apps. Here you can have the data on Google's servers and request the data using user-password authentication. This is very safe method.
If you decide to use Sql, the typical unsafe query would be similar to querying using WHERE command wherein the parameters are username and password. But that should only be done on your website, and not on the client.
Hi everyone,
I'm looking for a way to pull data from a form submission that had been sent from a website.
Here is what I like to achieve:
1. the task will check if the data within the email contains email 1 and email 2 and or email 3, and stores the full name from form data in a variable named %fullname
2. If email 2 and or email 3 are not empty, send email to email 2 or email 3 with a custom message that says %full name just invited you.
Please let me know if there is anything that needs to be clarified, so that I am able to make it clearer for you to understand if needed.
Thanks in advance!
Anyone have any ideas?
Also would it be possible to do this via an SQL database?
It's probably easiest using AutoNotification, putting the body of the email into a variable and manipulating that variable. Read up on Regex matching and splitting variables. There are plenty of discussions found searching on Google.