Related
All of a sudden the lower part of display (about 7 mm) has become unresponsive to touch which means no more gestures (swipe up to get to home screen is not working) e struggle to use the classic navigation buttons.
Sadly I had the same issue in my mi5 but in that case phone had the issue since the unboxing.
I'm starting thinking the xiaomi touchscreen tend to be more fragile than others.
Now I'm waiting for gearbest support.
Anyone has any advice or similar experience?
I made a screen recording
https://youtu.be/bIOUK1V56Ao
No one? Any advice?
jendrassik said:
No one? Any advice?
Click to expand...
Click to collapse
Regarding Xiaomi Quality
While climbing into my truck, I dropped my Mi8 from a height of about 4 ft on accident and it landed flat on its face , on the concrete. Freaked out, I left it laying their for about a minute fearing that the screen had been smashed into a million pieces. However, I picked it up to see that it was fine, and not a single scratch. So I immediately went out and bought the Love Mei 360 case.
Anyway, regarding your touch issue, you should really provide more some information about how this issue came about, what rom were you using, did the phone get wet, etc.
Also, I had an issue with my Mi8 soon after unlocking the bootloader where the top part of the screen would not register my touches, I first tried recalibrating the screen using Miui hidden settings app, the test is called QMMI ( I think) and if I remember correctly there are several menus of testing that also calibrate the screen for me this worked and for good measure I reinstalled a Miui rom and havent had the issue since.
Try it, hopefully that is the only issue. If you are using a AOSP. It's possible that you have a driver issue. So before sending the phone off for service its worth testing.. If you are on stock and still have a locked bootloader, I would try resetting the phone before trying anything else.
Good Luck.
Some gravedigging, but the question is still on the table - have you managed to fix it?
Recieved my K20 Pro yesterday and I've noticed that there's a slight green tint on the upper left corner.
Here's an example.
imgur .com/a/Tr9b61H
It kinda goes away on 80%+ brightness and also appears on white and that gradient, sadly I can't take a photo on a white setting because it doesn't appear on the photo.
Any people out there that has a Mi 9T, K20, K20 Pro that is experiencing the same problems?
We can also share problems that we experience here so we could test it on our devices, feel free to share! Thanks!
Additional questions:
1. Also is there any way to know if the device has been used, returned or a refurbished one?
2. Idle temps is 35c, when gaming it reaches out to 50c~55c. Is it normal/okay?
3. The thing is if I refund or return I'll be getting the same device, so do you think it is worth the hassle?
Sorry I'm a new account so I could not post links. Thanks!
I'm on the latest MIUI version, no other changes made.
unknown_unknown said:
Sorry I'm a new account so I could not post links. Thanks!
I'm on the latest MIUI version, no other changes made.
Click to expand...
Click to collapse
I bought the Mi 9t pro on the 28th august and it had some issues so i returned it and bought a new one. Arrives today, we will see, i would reply if the problems repeat
the problems were:
1: With the dark mode activated, The contrast with true blacks and gray, while moving the screen, the pixels that had to turn from black to gray had a Blue/purple tint. most noticable with Less than 50% brigthness
2: with, again, gray tones ,the screen had a line in the middle across the display that had a gradient towards white, like in spotify, for example, wasn't a solid color.
3: Some touch issues, most noticable while gaming(Call of duty mobile in my case)
Similiar issue. @oliese have you returned it, or its normal scenario with led panels?
kanteon said:
Similiar issue. @oliese have you returned it, or its normal scenario with led panels?
Click to expand...
Click to collapse
I have kept the second one I bought, this one has a lot less of that problem, mostly unnoticable
I live in Toronto and considered myself lucky to find someone to change my cracked screen. All seems great, accept now my fingerprint sensor isn't rally working. Every other aspect seems to be perfect. Anyone had this issue? Anyone changed screens? Anyway to reset the fingerprint sensor other then erase and try again?
Any help would be appreciated.
TIA.
Maybe he forgot to reattach it and your phone basically has no fingerprint scanner now? Idk open it up and look for yourself.
Thanks.
Was it an AMOLED screen, AliExpress sellers are now selling TFT LCD replacement screens, alongside AMOLED screens, at about half the price. LCD screens aren't good with FOD ordinarily.
I replaced mine back in December with an AMOLED, but I've been on custom ROMs where the FOD isn't as good as stock anyway, so couldn't say if I'm getting as good performance as before. It recognises my left thumb 9/10 and my right thumb 5/10, and never as fast as stock, which seems about par for the course with custom ROMs. I considered flashing MIUI just to test the FOD properly after fitting the replacement screen, but never got round to it.
Robbo.5000 said:
Was it an AMOLED screen, AliExpress sellers are now selling TFT LCD replacement screens, alongside AMOLED screens, at about half the price. LCD screens aren't good with FOD ordinarily.
I replaced mine back in December with an AMOLED, but I've been on custom ROMs where the FOD isn't as good as stock anyway, so couldn't say if I'm getting as good performance as before. It recognises my left thumb 9/10 and my right thumb 5/10, and never as fast as stock, which seems about par for the course with custom ROMs. I considered flashing MIUI just to test the FOD properly after fitting the replacement screen, but never got round to it.
Click to expand...
Click to collapse
Thanks for getting back to me, yes it is an AMOLED and I do have an update!! It works perfectly once the screen is on. If I remember correctly I was able to use the scanner from the lock screen with the animation of the fingerprint.
Now I can only use it if it's in the on position showing the time etc. so I just used lift to wake so it works 100% now.
Thanks for the attention.
I have the same problem, caused by replacing it with a screen from a random ebay seller (local warehouse).
After looking through a few Aliexpress listings I noticed that some product descriptions contain a note that they sell only a compatible part, not an original. Others state "100% original" or something along these lines. And many just don't write anything... I assume most of them are fake, if not all.
It is definitely a OLED, but the fingerprint gets almost never recognized, it is hard to complete even the fingerprint setup. Only works if I increase the brightness manually. The screen goes somehow much darker in fingerprint mode, instead of making a bright cyan dot like the stock part. Enabling the screen before unlocking helps on mine too, I think the reason is the higher brightness there, but still not as good as before with the standard screen.
In addition the image is a bit worse, especially looking closer at solid grey, it looks grainy. Normally it should look clean. Do you see that as well?
Scrolling is also not as good, doing a fast fling results in a much slower movement than with the stock screen. It works and might not be as noticeable, but having two devices side by side reveals quite a big difference. I bought another 9T just to try this...
---Jake--- said:
I have the same problem, caused by replacing it with a screen from a random ebay seller (local warehouse).
After looking through a few Aliexpress listings I noticed that some product descriptions contain a note that they sell only a compatible part, not an original. Others state "100% original" or something along these lines. And many just don't write anything... I assume most of them are fake, if not all.
It is definitely a OLED, but the fingerprint gets almost never recognized, it is hard to complete even the fingerprint setup. Only works if I increase the brightness manually. The screen goes somehow much darker in fingerprint mode, instead of making a bright cyan dot like the stock part. Enabling the screen before unlocking helps on mine too, I think the reason is the higher brightness there, but still not as good as before with the standard screen.
In addition the image is a bit worse, especially looking closer at solid grey, it looks grainy. Normally it should look clean. Do you see that as well?
Scrolling is also not as good, doing a fast fling results in a much slower movement than with the stock screen. It works and might not be as noticeable, but having two devices side by side reveals quite a big difference. I bought another 9T just to try this...
Click to expand...
Click to collapse
I doubt my screen is original, but it's definitely good quality. There's no noticeable screen quality issues, either with display resolution, colour or motion. Haven't compared it against another Xiaomi/Redmi display, but against other FHD+ 60 Hz AMOLED displays on a mid range Samsung and a top range Honor, it's just as good.
I have the same exact issue after replacing my own screen. It seems to have to do with the finger print animation lighting up when your finger gets in contact with it.
I've disabled the finger print method completely and that seems to help.
I'm not sure how to fix this though, as I would like to use it the way it was intended myself.
(btw factory resetting the phone helps with the success rate of the finger print sensor if you haven't tried that)
Perhaps if you need to buy a new display, I bought the "AMOLED Black" variant available here. Has been replaced on a Mi 9T, everything works fine and it's as good as the original display. It seems like the price has dropped significantly, almost 50%.
FPSUsername said:
Perhaps if you need to buy a new display, I bought the "AMOLED Black" variant available here. Has been replaced on a Mi 9T, everything works fine and it's as good as the original display. It seems like the price has dropped significantly, almost 50%.
Click to expand...
Click to collapse
do you know what is the difference between "original black" and "amole black"?
FPSUsername said:
Perhaps if you need to buy a new display, I bought the "AMOLED Black" variant available here. Has been replaced on a Mi 9T, everything works fine and it's as good as the original display. It seems like the price has dropped significantly, almost 50%.
Click to expand...
Click to collapse
please do multi touch test. Have 10 points?
Argom97 said:
please do multi touch test. Have 10 points?
Click to expand...
Click to collapse
Yes, it's all working. I only have no idea what the difference is between "AMOLED" and "Original". I assume that perhaps Xiaomi certifies those displays as original, however, they're most likely the same as the "AMOLED" displays, maybe with slightly better color accuracy. I didn't notice a difference between my Mi 9T Pro and the Mi 9T with the replaced display.
FPSUsername said:
Yes, it's all working.
Click to expand...
Click to collapse
I changed the display but I have problems on my MI 9T Pro with MIUI 12.
5 dot instead if 10 dot touch.
Double Tab To Wakeup didn't working.
Fingerprint sensor didn't working (restarts after using).
All these points are working on your phone with this display from AliExpress?
If yes, I will buy this display too .....perhaps .....
Murph07 said:
I changed the display but I have problems on my MI 9T Pro with MIUI 12.
5 dot instead if 10 dot touch.
Double Tab To Wakeup didn't working.
Fingerprint sensor didn't working (restarts after using).
All these points are working on your phone with this display from AliExpress?
If yes, I will buy this display too .....perhaps .....
Click to expand...
Click to collapse
It's not my phone which has the replaced screen, but from what I know, everything is working. Besides that, they're quite cheap now (I had to pay double for what they retail now since it was cracked roughly half a year ago). The total job would cost you under 100 euro to get it replaced.
Murph07 said:
I changed the display but I have problems on my MI 9T Pro with MIUI 12.
5 dot instead if 10 dot touch.
Double Tab To Wakeup didn't working.
Fingerprint sensor didn't working (restarts after using).
All these points are working on your phone with this display from AliExpress?
If yes, I will buy this display too .....perhaps .....
Click to expand...
Click to collapse
The screen used on my device was this link (the amoled model) and everything you described is working perfectly:
https://it.aliexpress.com/item/4000691686320.html?spm=a2g0s.9042311.0.0.41084c4d4VnhIQ
A summary of the situation:
Until MIUI 11, the MI 9T / K20D [PRO] worked normally even when their screen was replaced by non-original screens with only 5 multitouch points, sometimes described as "tft" or "oled", including the fingerprint scanner.
Most of the screens available on internet sellers are of these types, and vendors often insist that they are original. The easiest way is to check the number of multitouch points, if it is not 10, it is not original.
After upgrading to MIUI 12, the fingerprint scanner of the MI 9T / K20D [PRO] equipped with these screens no longer works, restarting the device whenever trying to register a fingerprint. This is not a calibration problem.
The only solution found so far is to replace the non-original screen with an "AMOLED" screen, with 10 multitouch points, which is either original or at least has characteristics similar enough to the original to work.
This topic has a good explanation on that subject https://forum.xda-developers.com/k20-pro/help/miui-12-fingerprint-unlock-defective-t4122135
I hope it helps
Hi there,
my Redmi Note 9 NFC version has a problem with its touch screen. For me, it is too sensitive, which means my finger hovers about 1 mm above the screen an the phone detects a touch, which is clearly wrong. That leads to wrong typing and all sorts of other annoying issues.
Does anybody of you know how to turn the screen less sensitive? The tips I read on the Internet are not applicable to the Note 9 or are simply useless.
Your input is highly appreciated!
Thanks!!!
-Dfahren
If you searched the internet and found no one facing that issue on the same device then it might be just your unit with this problem. Anyways your phone has a warranty and contacting Xiaomi's support is recommended.
Sorry, don't think I can help you - I haven't come across this problem. Just tried to reproduce it myself but can't. Are you using a screen protector? If not, you might find it helpful to use one - they tend to dull the sensitivity a little, though if you're getting touches detected without any contact being made I suspect a screen protector might not help
that's unfortunate that no one has the same problem, which means it could be a hardware problem, which means I need to return it or take it to a service center.
I'm using the original screen protector, didn't tear it off. I had hoped there was some internal feature within the CIT, for instance, that I can use to recalibrate the touch screen, but it merely checks the touchscreen.
Hmmm, need to think about it a bit more.
I also have this problem , . I have a Redmi Note 9 pro EU version . My finger gets registered about 1 mm above the screen . Although I don't seem to have a problem with typing, it is annoying as sometimes the screen registeres my finger without touching by the screen witch leads to all sort of problems , ( like wrong friend requests on Facebook )
Hi, I recently bought a Realme GT 2 8/128GB Global RMX3311_11_A.14 firm and have been using it for past couple of days.
What I have noticed like artifacts around black text on white background, like a bright halo under dark shapes and clear/light background, it's like a 1px brighter-than-the-background, like a broken anti-aliasing/ClearType or maybe is that the sharpness is very high.
I have tried all the configuration options available for the screen but there have been no changes. For example, in the list of Wi-Fi networks, in the password field, if you look at the black line, it is in one of the places where it is most noticeable.
https://imgur.com/t50LOm5
it is very difficult to capture with a camera, this is not my phone but the same thing happens
https://imgur.com/zOkyWWG
I think i have same problem which is reported in this other thread for a Xiaomi phone https://forum.xda-developers.com/t/over-sharpened-mi-11x-amoled-display.4319715/
Is this normal or there's any problem with my display? Is this a Realme UI 3 issue and can be solved in following updates?
I have other three Amoled phones and this DOES NOT happen to any of them! (Realme 8, Oneplus 3T, Xiaomi Mi A3)
thanks!
regards
Do you have DC Dimming enabled ?
I noticed that when it is enabled in low brightness and black background there's some flickering on the page text when scrolling.
But that particular issue I don't have.
Hi apsol, thanks for your answer
No, I did not have DC dimming active, I have tried to activate it but it has no effect on what I comment
with time I'll get used to it, now I know it's there and I see it. What I would like to know is if it is a problem with this AMOLED panel or rom/driver issue which could be adjusted via software
I know how it is, once you see it you can't unseen, it would drive me nuts too. Hehe
Have you tried testing for dead/stuck pixels if it doesn't show there my guess is software.
I'm on RMX3311_11_A.14.
What about you ?
Hi,
Same firmware version here, RMX3311_11_A.14 global
the truth is that I am not sure if it also happened with the A.13 because I almost updated it at the moment, I did not realize this until I was in the A.14 ...
thanks
The same problem on my phone. It is easier to see also on black background with white font.
Unfortunately I think this is a screen issue not soft
Have anyone have similar issue? Is this global problem or only 2 of us struggle with this issue?
Check if you have high contrast text enabled.
I have high contrast disable ( but the same issue is visible when option is on). Do you have this is issue? Or should I send my phone on RMA?
I don't.
If it bothers you that much return it.
Hi again,
After continuing to search for information on this issue, I found following post on reddit that I think has the same problem with an iPhone 13
https://www.reddit.com/r/iphonehelp/comments/tdy5tc
I think it's a common problem with AMOLED screens, but in some it is more noticeable than in others and it also depends on the user
after detecting it on my Realme GT 2, if I make an effort, perhaps I could say that it also happens on my OnePlus 3T, however the difference with my Realme is remarkable, the same with a Realme 8 of a family member
By the way, another thing that I have detected is a color shifting when the viewing angle is varied, much higher than in my other devices with AMOLED, it must be said that the larger the screen, the more noticeable it is
I'm a little disappointed with the screen to be honest
thanks
MrAnon said:
Hi again,
After continuing to search for information on this issue, I found following post on reddit that I think has the same problem with an iPhone 13
https://www.reddit.com/r/iphonehelp/comments/tdy5tc
I think it's a common problem with AMOLED screens, but in some it is more noticeable than in others and it also depends on the user
after detecting it on my Realme GT 2, if I make an effort, perhaps I could say that it also happens on my OnePlus 3T, however the difference with my Realme is remarkable, the same with a Realme 8 of a family member
By the way, another thing that I have detected is a color shifting when the viewing angle is varied, much higher than in my other devices with AMOLED, it must be said that the larger the screen, the more noticeable it is
I'm a little disappointed with the screen to be honest
thanks
Click to expand...
Click to collapse
I came specifically to this forum to check whether its true about the screen's colour shift and font edge issues. Seems its true. Its believed that they have used the same samsung E4 hard screen, that they used in oneplus 9RT. You can check 9RT's display review below:
https://www.gizmochina.com/2021/10/22/oneplus-9rt-review-perfect-balance-camera-price/
There is also a Chinese video on GT2 display. Its a review of k50 and gt neo3, but they have shown display of gt2 also. Watch from 2:30 min.
I don't see that problem on my gt2 in normal use.
I also have the blue shifting even when looking straight. I try to ignore it.
Someone told me it was the screen protector but I never removed it to be sure.
But every review I've seen there is color shifting.