[HELP] X 2014 only charges, doesn't boot into system/recovery - X 2014 Q&A, Help & Troubleshooting

Hi,
So the battery of My moto x 2014 is almost dead. It shuts down every now and then, even when the battery meter says its 100%.
Few hours ago it got shut down. I was busy so I connected it to charger and left it as it is. Now when I picked it up it won't turn on. When I connect the charger it shows battery symbol for 2 seconds, vibrates then shows smaller battery symbol (all black screen with white battery symbol in the center, and the symbol is full white meaning the battery is full), and then complete blank screen.
I tried to boot into system, recovery, fastboot but it won't work.
When I connect it to computer, computer gives off a sound that a new device is connected but adb won't recognize the device.
Help!

Hey mods you can delete this thread.
I was trying to remove the back cover and somehow the power button ribbon came out of its slot. I only saw it once I removed the back cover completely. Putting it back fixed the problem.
Sorry guys! ?

Related

[Q] Is my Milestone dead?

Hi,
I did something stupid yesterday: removed the battery while booting. It was on the boot animation screen, after the Motorola logo went out.
Now I can't turn the phone on, the white charging LED does not light up when connected on the computer USB port or the wall/car charger.
Tried:
- Removed/reinserted battery
- Press power button with SIM removed
- Press power button with memory card
removed
- Press power button and X
- Press power button and UP
- Press power button without battery inserted, while on wall charger (?)
Android version: 2.1. Stock version, rooted, no overclocking.
There's no sign of life on the device. Tried leaving it for 2 hours without the battery to powercycle it and tried leaving it to "charge" in the wall charger overnight and still no signs of life. At one point the LED white light flashed for a fraction of a second when inserting the cable but it no longer does this I don't think.
Could this be a battery problem?
Just want to check with you guys before taking it to the authorized service, because it will take weeks to get back.
Thanks.
Alright, so I just checked and when I plug my phone into the wall charger, the LED comes on for a split second then disappears. Also, since I lost my original battery, this battery was bought online, not too sure if it is a generic battery though.
At this point, im leaning towards this being a battery issue. Am I correct?
use rsd lite and try to flash a new sbf image
Hi have you found solution of this problem ? Yesterday i did same thing as you while booting removed batery and now it is dead it wont charge battery and same as yours when pluging charger led flashes for a fraction of second ...
maybe u must reflashed the firmware
I have same problem with my Milestone now. Not possible to power ON my phone. Tried to plug it in PC but the system didn't detect it for RSD re-flash.
Anyone have another ideas? Thanks in advance.

Bionic will not power on

Hello:
I recently got a use Bionic with a cracked screen, no battery, and no sim card. I replaced the screen and bought a non-oem extended battery with cover. When I got everything and fixed it, the phone worked for 3 days. During this time I did a factory reset plus cache wipe then updated everything to latest software and firmware. I had it plugged into my computer to charge over night but on the third day after being plugged in to the computer to charge, I tried to turn on the phone and the white light started blinking at me. I had a wall charger that I use for my Samsung Galaxy Precedent (current using phone) to charge it over night again but all I would get is the Motorola M logo and a then the battery charge status. I search some forums and some one said that my battery was bad so I got an OEM extended battery and an OEM wall charger with dock station. So at this point, the only thing I can access is the recovery screen but that only happens when it is pugged into the wall charger but when I hit the power button I get the Motorola M logo and the battery status which say 5%. Once the screen goes dark again I hit the power button and the battery says 100%. But once I unplug it, I get nothing. Not even the recovery screen. When I plug it into my computer I get the white light again but this time it stays solid. It still will not power up, or even access the recovery screen while plugged into the computer as well. Any suggestion on what might be wrong and what I might do to fix it? Please help someone!

[Ubuntu] Won't boot after battery died

Hi, I recently flashed the new Ubuntu Touch image for the Xperia Z1 without any issues, but then my battery died after a few days of no usage and I can't get the phone to boot, nor can I get it into fastboot or recovery: When I put it on charge, first the notification-LED starts blinking red, then after a few minutes it begins starting up to charging mode (battery icon). Pressing any volume buttons while the Sony logo shows doesn't help, and after that the phone begins totally bugging around. I can't get it to boot to Ubuntu, but I also can't get it to turn back off without waiting until the battery drains, and then I'm back at plugging it in again. I also tried hitting buttons while plugging in the USB-cable, but again, no results.
Any suggestions? Thanks in advance.

Z2 black screen after battery charge status "stuck", help!

Hello dear android help community,
I noticed on my Z2 Pro that the charge indicator got stuck at 65%, when I noticed that, I checked the Amp Battery App and all values were read in incorrectly. The temperature was at -20 ° C lul and the voltage at 0.02V. I tried to restart it but then the display remained black. No boot selection, nothing! If I hold the switch for about 30 seconds, it vibrates briefly but the display remains black. If it is connected to the PC at the same time, it will be recognized as Unknown Device (The USB device has returned an invalid USB device descriptor). On the ZUK is the current RR-O-v6.1.0-20180710-z2_row with the void5.4 kernel and twrp-3.2.2-0. I'm trying to empty the battery completely, but then I do not know how to continue.
Are there any other ideas how to get it to boot again?

Mi5 dead,only RED LED.

So one morning I woke up and saw phone keeps rebooting(bootloop).I had breakfast then came back to pick it up,and i connected it to charger and phone was totaly dead.I tryed other cables but still same result.Only way to power it on is when I use original cable and connect it to charger/pc.Then red led turns on and display showing low battery,and led keeps blinking.Sometimes it can boot into system and works for few minutes and shuts off cuz 0%.I changed battery but everything is same,I also can go into TWRP.
**I TRIED EDL MODE/two pins or whatever and my PC is not showing Qualcom driver or anything else in relation with phone
i had same issue before, i simply just buy new cable and it working again!!
PS. Before i buy new cable i already had 3 type-c cable bot non of them working
I had the same issue an hour ago. My MI5 had ~25% charge left when I saw it shutting off, maybe I unknowingly did it. Then I decided to leave the phone in TWRP at night but in the morning it appeared to be dead. The red LED blinked only when I pressed the buttons, no turning on, fastboot or booting into TWRP was possible. When I plugged it into the charger an empty battery icon appeared with the red LED blinking continuously. After some time a new animated battery icon appeared, in the still turned off state, but this time showing the exact charge percentage (2%). It went to 3% and I turned it on with the power button.
Should be a faulty battery which needs to be replaced!
Vivitsu said:
I had the same issue an hour ago. My MI5 had ~25% charge left when I saw it shutting off, maybe I unknowingly did it. Then I decided to leave the phone in TWRP at night but in the morning it appeared to be dead. The red LED blinked only when I pressed the buttons, no turning on, fastboot or booting into TWRP was possible. When I plugged it into the charger an empty battery icon appeared with the red LED blinking continuously. After some time a new animated battery icon appeared, in the still turned off state, but this time showing the exact charge percentage (2%). It went to 3% and I turned it on with the power button.
Click to expand...
Click to collapse
Remove back cover plug and replug the battery connector it qill solved (red light of death) if still happend you need to buy new battery

Categories

Resources