Related
so yeah..... (dont all you laught now) but i just droped my phone in the toilet *b4 pissing thank god*... and it shut off... i took out the battery ASAP... and use a hair dryer to dry it out.. now its under a fan blowing semi cool air....
did i just completly **** my phone.... im sure i did... anyone know of something 2 do..
please help... ive been without my phone for 20 minutes.. and molski is releasing his 3rd ed rom soon.. and i wont even be about to use it
I once had Kool Aid poured down a motherboard of an open computer case. A lot of cleaning and a day later, it still worked fine.
Is there hope? Sure. Are the odds in your favor? Probably not.
But since you already got your phone wet, you know your warranty is gone. My advice (it's worked for me before) is to take the phone apart carefully, dry it off completey, clean it with 90% isopropyl rubbing alcohol and a microfiber cloth, and then wait for it to dry again. Hopefully that will stop the corrosion and hopefully removing your battery immediately worked to your favor before anything shorted out.
Good luck!
help again
ok welll first of all.. ummm im not gunna say WHY, but my warrenty wont work period on the phone. next what do i use to take it apart??? i know not to even try to turn it on for atleast a day or two..... and drying under a fan right now... and what if i cant clean with with 90% whatever you said and a microfiber thing... cuz i wont be able to get that untill tomrrow
I highly suggest you open it and do as was suggested earlier. Same thing happened to me on my Nokia phone and the above procedure saved it. Goodluck!
well i just left it under a fan all night.. and tried it this morning and everything works fine.....WAHOOOOOOOOOOOOOOOOOOOOOOOOOOOO
You may want to seal your phone in a plastic bag with some instant rice or cilica for a couple of days. This will pull out any remaining moisture. If you did not take your phone apart I'll bet there's still water inside. If you don't get it out corrosion will set in.
Good luck
Phone wet - solutions
Well, I'm glad you saved your phone.
With all electrical equipment it's adviced to:
- switch it off ASAP
- the shorter it was on while wet, the less chance you have damaged it
- ensure that it gets completely dry
- a hairdryer can help, but at least open the phone as far as possible
- you can also leave it open on a warm place in the house,let the sun shine on it
- I would even let it dry for a few days
I must say, it also depends on the type of fluid. Salty water, coca cola, ice tea, coffee....these have a bigger chance to cause damage. If that happens, while switched off, clean a while well with just water to get to salt or sugar out. Then let it dry.
happend to my phone as well, after taking a piss (and flushing the toilet). I only opend the keyboad and lett it dry for a day on the heating. works fine [email protected] first the display was flickering quit a lot. but now, a week later... it's working as before.
Accidentally, I put my tilt with clothes into the washer when I was doing laundry yesterday. Yeah, it does look much cleaner after one hour's wash with detergent, but I couldn't start it any more. After one day baking on top of the monitor, it was able to boot up, but the device will automatically shut off after showing the message " Sim Door is unlocked and the device will shut down in 10 seconds". I've checked the door, locked and unlocked it, but it doesn't work. Liquid has caused a short?
By the way, the warranty has expired, so I have to fix it all by myself. Would appreciate any suggestions
rubbing alcohol and toothbrush try cleaning the guts
Warranty would't cover this anyway. I'd eBay it as "for parts only" and buy something else. Good luck.
Most cell phones as I understand from a tech...they have "indicators" like small dots for example that change color when introduced to liquid. Quick way to say no to the customer in regards to warranty.
UR2L8 said:
Most cell phones as I understand from a tech...they have "indicators" like small dots for example that change color when introduced to liquid. Quick way to say no to the customer in regards to warranty.
Click to expand...
Click to collapse
They're called Liquid Damage Indicators (LDIs). They're behind the battery on pretty much every phone.
Friend of mine laundered her Treo. She let it air out on a windowsill for a week.
She let it sit on a couple of silicone packets she had from a camera box.
(Water WILL evaporate, but soap will NOT. I hope it is rinsed.)
It works fine now. Hope this helps.
zhiheng said:
Accidentally, I put my tilt with clothes into the washer when I was doing laundry yesterday. Yeah, it does look much cleaner after one hour's wash with detergent, but I couldn't start it any more. After one day baking on top of the monitor, it was able to boot up, but the device will automatically shut off after showing the message " Sim Door is unlocked and the device will shut down in 10 seconds". I've checked the door, locked and unlocked it, but it doesn't work. Liquid has caused a short?
By the way, the warranty has expired, so I have to fix it all by myself. Would appreciate any suggestions
Click to expand...
Click to collapse
Clean it with alcohol and toothbrush as GuySparkz said.
Best to use is isopropylalcohol, if not in specialized electro shop, you still can get it in pharmacy shop. but it will still not dissolve all parts of soap. You should use demineralised water for this, from gas station. yes water. then alcohol. demineralised water act like sponge to minerals and stuff from soup and regular water.
dissasemble it completelly, bath mainboard in dem. water for an half hour, use toothbrash don't be shy with it, then bath in alcohol half hour, now use toothbrush VERY carefully, without too much power. It could tear smd's away.
you can put it to bath on top of working wash mashine to use vibrations from it.
after bath I am using pressed air to drain and blow away drops which still contain unwanted substance, don't use the one from gas station because it contains condensed air drops, better use straw and blow on it fastly.
use fan during your presence or beware of breathing fumes too much and don't let fumes go to your eyes too. it's irritating.
don't bath battery, LCD, cameras, vibra device, keyboard, speaker and mic. use just brush.
if water get in touch panel, you'll probably need to get a new one.
if battery will stop working in few days, you can open and bath board inside it.
now to just drying method. it's risky, water is not 100% conductive, but rust which will be created after few days is and that could finish it off.
I cleaned plenty of phones & cameras after my friends been rafting with them with 100% success. only one camera which had been only drained and used for another 2 days was really dead.
You may want to try taking the battery out and washing it again with rubbing alcohol. It may sound stupid but soap will conduct electricity as it is an electrolyte albeit a bad one i think, this could be causing the short especially when these devices use such low voltage. Get all the residue off and let it air dry I did it once before with my Blue Angel. Dropped it into a blue toilet when i was deployed and I did that and it worked. And before I get a comments from the peanut gallery... My phone was not sh*$y or blue or anything like that just a phone.
Thanks for all you guys. your suggestions really helps!
In fact, I was going to wash it by alcohol.
Anyway, just want to try one more time before I open it.
It does boot up today W/O any error message, even though you still can see some weird areas on the screen.
It is really amazing!
Just to be safe, currently it was sitting in a big bottle of CaSO4 (moisture absorber), hopefully it can be fully cured.
zhiheng said:
Thanks for all you guys. your suggestions really helps!
In fact, I was going to wash it by alcohol.
Anyway, just want to try one more time before I open it.
It does boot up today W/O any error message, even though you still can see some weird areas on the screen.
It is really amazing!
Just to be safe, currently it was sitting in a big bottle of CaSO4 (moisture absorber), hopefully it can be fully cured.
Click to expand...
Click to collapse
One of the reason why using alcohol to clean is good is because it will evaporate itself (and whatever liquid or dust it mixed with) almost instantly when you apply on the surface. It's the best cleaning solvent.
This may also help you for your screen problem: http://www.dealextreme.com/details.dx/sku.14919
After rinsing pack it in white rice for several days, it will suck out all the moisture.
JohnnyGTO said:
After rinsing pack it in white rice for several days, it will suck out all the moisture.
Click to expand...
Click to collapse
very good advice
joihan777 said:
Friend of mine laundered her Treo. She let it air out on a windowsill for a week.
She let it sit on a couple of silicone packets she had from a camera box.
(Water WILL evaporate, but soap will NOT. I hope it is rinsed.)
It works fine now. Hope this helps.
Click to expand...
Click to collapse
The Treo seems to fair exceptionally well in regards to water damage. My father flushed his twice, both times he had to remove the toilet to retrieve it. He placed it overnight in front of an air vent and it worked flawlessly afterward and has been working for 6 months since it happened.
Hey all,
To keep a long story short, saliva (from my 1 year old daughter) got on/in my phone and now part of the screen does not work. When I say "does not work", the phone is mostly functional, but if I try to scroll through forums or menus then it will try and select some of them as I scroll. Also, some of the onscreen keys don't function properly when using the keyboard on the side. And, the swype does not work.
I did turn my phone off and leave it in a bowl of uncooked rice over night, but that didn't seem to fix much. I even went to the length of re-flashing my ROM and wiping data/cache.
Any suggestions would be greatly appreciated! (I am not afraid to take my phone apart)
Rice is a little to big to get into the nitty gritty of the phone and really dry it out, it may be too late by now but a more thorough way to dry out is to, Take the phone apart, get a q-tip dipped in rubbing alcohol and go over the entire phone. The moisture mixed with the alcohol with evaporate much much faster.
studacris said:
Rice is a little to big to get into the nitty gritty of the phone and really dry it out, it may be too late by now but a more thorough way to dry out is to, Take the phone apart, get a q-tip dipped in rubbing alcohol and go over the entire phone. The moisture mixed with the alcohol with evaporate much much faster.
Click to expand...
Click to collapse
Any specific parts I should focus on primarily? I was thinking that the issue may be where the screen cables connect to the mobo.
That's a good assumption.... going over the entire phone will cover all those bases.
Like i said it could already be too late. Good luck man.
Just got done cleaning the internals.. Same spots on the screen are not responding correctly. Looks like it's time to hit up e-bay for a replacement
That's what it sounded like.
But I wouldn't do alcohol wiping. I'd leave it in clothes dryer.
For your next phone pls get a case and screen protector.
bravomail said:
That's what it sounded like.
But I wouldn't do alcohol wiping. I'd leave it in clothes dryer.
For your next phone pls get a case and screen protector.
Click to expand...
Click to collapse
Have both a screen protector and case. I heard clothes dryers are bad news for phones though.
Demonic240 said:
Have both a screen protector and case. I heard clothes dryers are bad news for phones though.
Click to expand...
Click to collapse
It is as the dryer would probably not only break the phones screen but can shake around the hardware as well. Rice, or a hair dryer set on low is the best bet for drying out phones.
You guys really need your sarcasm meters checked...
I probably do right now. I didn't get off work until two hours ago. Will try better tomorrow haha.
Sent from my Samsung Captivate running Team ICSSGS 4.0.3
so-ooo. hair dryer? really? it melts plastic last I saw.
Clothes dryer was bad call, so I retract. May be leave it in furnace room? Stuff gets dry there pretty quick.
I liked sarcasm meter comment. Made my day!
bravomail said:
so-ooo. hair dryer? really? it melts plastic last I saw.
Clothes dryer was bad call, so I retract. May be leave it in furnace room? Stuff gets dry there pretty quick.
I liked sarcasm meter comment. Made my day!
Click to expand...
Click to collapse
Yeah.. down south here we don't have furnace rooms
I completely disassembled my phone last night (sans removing glass/lcd) and used rubbing alcohol over all the ribbon connectors. On the plus side, I didn't screw anything else up... on the down side though, still have that nice dead zone on my screen.
Now to either buy a replacement off e-bay or try and pilfer my brothers Infuse that he soft bricked until my contract is up in June.
Ended up fixing my brothers infuse. Nice phone, but I'm going to miss ICS
Sent from my SAMSUNG-SGH-I997 using XDA
Kinda embarrassing, but I had the tablet on the water take and when I flushed it just slipped right into the bowl...
Power button isn't really working.. took the back off of it and have it laying glass up hoping the water drains out of it. Not like there is alot of water in it or anything just want to be sure. Hopefully their isn't significant damage, but if there is I hope I can RMA it..
ugh.
The lesson here is to take a newspaper or magazine with you when you need to poop, instead of expensive gadgets.
/or bring some action figures if you are really young at heart
moinster said:
Kinda embarrassing, but I had the tablet on the water take and when I flushed it just slipped right into the bowl...
Power button isn't really working.. took the back off of it and have it laying glass up hoping the water drains out of it. Not like there is alot of water in it or anything just want to be sure. Hopefully their isn't significant damage, but if there is I hope I can RMA it..
ugh.
Click to expand...
Click to collapse
put it inside a bag of rice overnight. hope that helps.
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
Cryingmoose said:
The lesson here is to take a newspaper or magazine with you when you need to poop, instead of expensive gadgets.
/or bring some action figures if you are really young at heart
Click to expand...
Click to collapse
aye.
the issue is, i lose count how many times my GI Joes had a little "cyclone adventure".
moinster said:
Kinda embarrassing, but I had the tablet on the water take and when I flushed it just slipped right into the bowl...
Power button isn't really working.. took the back off of it and have it laying glass up hoping the water drains out of it. Not like there is alot of water in it or anything just want to be sure. Hopefully their isn't significant damage, but if there is I hope I can RMA it..
ugh.
Click to expand...
Click to collapse
RMA is for warranty repair only.
In your case, it's accidental damage which would/should not be covered by warranty.
Disconnect the battery immediately and let it sit in a dry area for at least a day. I'd even recommend hitting it with a hair dryer for 5-10 minutes. My daughter left her phone out in the rain, and when we found it, water literally poured out of the case. I took the battery out, disassembled it as much as I could and let to dry for a day. It survived and it working fine now. Keep in mind that most manufacturers place "moisture indicators" inside their devices. It's just a small paper sticker with tiny drops of red dye on it. As soon as water hits it, the dye runs and the sticker turns pink... and your warranty is void.
Sorry dude. Be more careful next time. Not sure what else to say.
ED2O9 said:
Disconnect the battery immediately and let it sit in a dry area for at least a day. I'd even recommend hitting it with a hair dryer for 5-10 minutes. My daughter left her phone out in the rain, and when we found it, water literally poured out of the case. I took the battery out, disassembled it as much as I could and let to dry for a day. It survived and it working fine now. Keep in mind that most manufacturers place "moisture indicators" inside their devices. It's just a small paper sticker with tiny drops of red dye on it. As soon as water hits it, the dye runs and the sticker turns pink... and your warranty is void.
Click to expand...
Click to collapse
Yeah it's powered off. Looking online right now how to disconnect the battery, also looking for the water detection sticker.
ED2O9 said:
I'd even recommend hitting it with a hair dryer for 5-10 minutes.
Click to expand...
Click to collapse
If his warranty wasn't void before...
sinhumane said:
ok, as a professional repair tech i can tell you that rice has a VERY low chance of success... it isnt as marvelous as everyone thinks it is. it wont absorb much of the moisture in the phone. i have seen numerous phones come through my shop after sitting in rice for days... STILL have standing water in them.
your best bet: if you have tools to take it apart, remove the board, and immediately put it in alcohol. if you have any residual corrosion on the board, take a VERY soft bristled brush and gently wipe the corrosion away.
if you dont have tools/a brush... take the battery out, and submerge the entire thing in 91% (nothing less) rubbing alcohol. you may ruin the lcd, but trust me, a new lcd is a far cry cheaper than a new phone.
also, your battery is likely toasted, buy a new one.
just as a caveat to all, unless you drop your phone in clean city tap water, or distilled water... its going to have contaminants in it, and will corrode your phone, rice or no rice. alcohol displaces the moisture, and removes chemicals/minerals on your board.
Click to expand...
Click to collapse
Try these tips. This guys a pro and he recently helped someone that dropped his phone in the pool.
Po1soNNN said:
Try these tips. This guys a pro and he recently helped someone that dropped his phone in the pool.
Click to expand...
Click to collapse
Thank you. I've disconnected the battery and it is sitting in the server room, Dry and Moisture free, yes? I've try some of the tips when I find the alcohol.
putting it in a sealed bag full of silicon gel sachets will also help.
That's a crappy situation.
If you're in the US and paid the full amount on your credit card (not debit card), see if the card offers any buyer's protection. American Express and the higher tier Visa cards offer a 90-day theft and breakage protection.
moinster said:
Thank you. I've disconnected the battery and it is sitting in the server room, Dry and Moisture free, yes? I've try some of the tips when I find the alcohol.
Click to expand...
Click to collapse
Is the battery dry? If it's wet you'll need a new one and remember this isn't guaranteed to work.
moinster said:
Thank you. I've disconnected the battery and it is sitting in the server room, Dry and Moisture free, yes? I've try some of the tips when I find the alcohol.
Click to expand...
Click to collapse
A server room should dry it out good.
This is going to sound pretty gross, was the toilet flushed? I recently repaired my HTC Hero that I had loaned to a friend, who then proceeded to drop it down an unflushed toilet
I dried it out, only to find it would not power up, not until I remove the pubic hair that was shorting it out
Just Something to look out for.
Just because the battery got wet doesn't mean that it's trashed. Tap water isn't that great of a conductor, so as long as the battery didn't discharge at too high of a rate from a short, it might be okay. If the battery felt very hot when you removed back cover, it's not a good sign.
As for the alcohol, I'd use it to clean the board but I'd hold off on submerging the whole unit. The openings on the Nexis's case are pretty thin, so I doubt much water got inside. I'd just let it dry and see if it works before doing anything drastic.
moinster said:
Kinda embarrassing, but I had the tablet on the water take and when I flushed it just slipped right into the bowl... Power button isn't really working.. took the back off of it and have it laying glass up hoping the water drains out of it. Not like there is alot of water in it or anything just want to be sure. Hopefully their isn't significant damage, but if there is I hope I can RMA it..
ugh.
Click to expand...
Click to collapse
If it was on when you dropped (probably was) it might have shortened something in the circuit board, and that is why is not turning on, however there is always hope and I would follow the previous advices to disconnect the battery, hair dryer and rice of bag overnight before trying turn on again.
Good luck!!
trevd said:
A server room should dry it out good.
This is going to sound pretty gross, was the toilet flushed? I recently repaired my HTC Hero that I had loaned to a friend, who then proceeded to drop it down an unflushed toilet
I dried it out, only to find it would not power up, not until I remove the pubic hair that was shorting it out
Just Something to look out for.
Click to expand...
Click to collapse
Hahaha, It was at the end of its flush when it slipped it. When it hit the bowl the case opened a little bit but I grabbed it as fast as I could.
ED2O9 said:
Just because the battery got wet doesn't mean that it's trashed. Tap water isn't that great of a conductor, so as long as the battery didn't discharge at too high of a rate from a short, it might be okay. If the battery felt very hot when you removed back cover, it's not a good sign.
As for the alcohol, I'd use it to clean the board but I'd hold off on submerging the whole unit. The openings on the Nexis's case are pretty thin, so I doubt much water got inside. I'd just let it dry and see if it works before doing anything drastic.
Click to expand...
Click to collapse
The battery was quite cool actually.
It was clean tap water, btw.
Another sad story: I dropped mine 4 feet to a concrete floor about 24 hours after it was delivered, breaking the screen. The display still works, but the digitizer won't respond to touches any more. I found a link to a place that claims to have the screen-digitizer assembly for $130, but haven't pulled the trigger.
No luck with the VISA purchase protection...
UnusualSuspect said:
Another sad story: I dropped mine 4 feet to a concrete floor about 24 hours after it was delivered, breaking the screen. The display still works, but the digitizer won't respond to touches any more. I found a link to a place that claims to have the screen-digitizer assembly for $130, but haven't pulled the trigger.
No luck with the VISA purchase protection...
Click to expand...
Click to collapse
Yeah, I'm pretty damn clumsy :/ and I bought it with a debit card.
If the digitize is $130 I would just spend the extra $70 and sell the unusable one as parts.
trevd said:
A server room should dry it out good.
This is going to sound pretty gross, was the toilet flushed? I recently repaired my HTC Hero that I had loaned to a friend, who then proceeded to drop it down an unflushed toilet
I dried it out, only to find it would not power up, not until I remove the pubic hair that was shorting it out Just Something to look out for.
Click to expand...
Click to collapse
This had me giggling in my little cubicle.
Anyone else seen this? I decided to put my phone to the ultimate test yesterday by putting it in some water - it seemed to do fine. But today I noticed there are water droplets all over the camera lens and hole for the flash. Doing some reading around, it appears that this can happen anyway in humid conditions (and can be dried out with a hairdryer and other methods) but I'm concerned that I have a flawed unit.
I intend to put this to the test again tonight to double check, but anyone else experienced this so far?
Each night you should crack open the seals and close the phone up in a zip-lock bag with a bunch of uncooked rice. Don't let rice get inside the phone.
That should lower the humidity in the device. Then stop deliberately putting your phone in water if you want it to remain dry.
cpurick said:
Then stop deliberately putting your phone in water if you want it to remain dry.
Click to expand...
Click to collapse
Sony promotes dunking the phone in water in a lot of their promo materials. You can't blame the OP.
untogether said:
Anyone else seen this? I decided to put my phone to the ultimate test yesterday by putting it in some water - it seemed to do fine. But today I noticed there are water droplets all over the camera lens and hole for the flash. Doing some reading around, it appears that this can happen anyway in humid conditions (and can be dried out with a hairdryer and other methods) but I'm concerned that I have a flawed unit.
I intend to put this to the test again tonight to double check, but anyone else experienced this so far?
Click to expand...
Click to collapse
Faulty phone, or you applied water pressure higher than its rating.
Sent from my D5803 using Tapatalk
That cpurick advice can be really useful. But this can be ultimately avoided by having the unit away from non-room temperature water.
Make sure you are not pushing it over the rating pressure.
I had waterproof cameras in the past - Sony, Panasonic, Olympus, etc... All of them shows mist at varying degree inside the lens when used for a long time under water. It dries up and I didn't notice any effect on the photos or does it leave permanent residue in the lens.
I had/have the Xperia Z and it had the same 'issue'. Sony said that it was normal, so I guess it's something normal.
Sent from my D5803
Thanks for the advice, all. The news isn't great - I turned the phone off while I put it in a bag of rice last night, it seemed to lower the amount of water in the lens but not remove it completely. Today it's behaving very erratically - the power button doesn't work, for one. I attached through adb and shut it down but the damn thing just starts up again immediately. So my current best plan is to put it back in some rice and wait for the battery to die out.
So, I'll see what happens after that, but I might have to get it replaced. And Sony might not let me because of water damage. Before anyone asks: yes, I checked 100x that the seals were closed tightly before putting the phone in the water!
untogether said:
Thanks for the advice, all. The news isn't great - I turned the phone off while I put it in a bag of rice last night, it seemed to lower the amount of water in the lens but not remove it completely. Today it's behaving very erratically - the power button doesn't work, for one. I attached through adb and shut it down but the damn thing just starts up again immediately. So my current best plan is to put it back in some rice and wait for the battery to die out.
So, I'll see what happens after that, but I might have to get it replaced. And Sony might not let me because of water damage. Before anyone asks: yes, I checked 100x that the seals were closed tightly before putting the phone in the water!
Click to expand...
Click to collapse
It's definitely faulty, return it ASAP.
Sent from my D5803 using Tapatalk