Related
I have numerous chargers at home all of which have charged my evo, gs2, Nexus 7, etc.
Can these be used interchangeable in the Note 2 without harming the charging process?
Thanks
As long as the Voltage is the same (5V) there is no Problem. But you should have a charger at 2 Amper for optimal charging speed.
I just tried charging mine with the normal microUSB charger I use for every other phone I have had and it took 7.5 hours to charge from 5%-62%. I used the stock charger that was in the box and it charged it in 3.5-4 hours no problem. Seems like the charger in the box charges faster.
reading this thread made me curious, my NOTE II should arrive in about a week, I can't tell for myself yet, what is the A (amps) specification mentioned on the original charger?
as i come from HTC, my current chargers go up to 1 A current. witch is the double A a standard USB port will give unless crossover'd .
thanks in advance!
----
in the wiki thread i found the answer, the supplied charger delivers 5 V 2 A output to the device.
WendigoNL said:
what is the A (amps) specification mentioned on the original charger?
Click to expand...
Click to collapse
2A! Same as the Tab 10.1 charger.
Filling a 3100mAh battery requires some grunt.
i think even the usb cable makes a difference..
when i use the stock usb cable with the stock charger ..my s3 would charge up comparatively faster than with the other usb cable connected to the same stock charger.:rolleyes
max.android said:
i think even the usb cable makes a difference..
Click to expand...
Click to collapse
It certainly does! :good:
All electrical cables have some resistance. Very low (but not zero) for quality cables, sometimes quite noticeable for thin and cheap offerings.
From Ohm's Law we know that voltage drop will be proportional to current. A cable with a resistance of just half an ohm will loose about 0.5% at 50mA. That's pretty much nothing. However, at 2000mA the loss reaches 20%.
dude use any charger, just don't use LG charger **** !!!!!
You must use the 5volt 2amp charger and cable provided or a replacement with the same output or youll either be waiting for ever for it to charge or do some damage.
I tryed using my note 1 charger rated at 1amp and guess what? It took about twice as long to charge.
Sent from my GT-N7100 using xda app-developers app
Some of my old 1 Amp chargers aren't happy at all, and will often decide to stop charging randomly.
I though it was something weird with my phone, but after switching chargers it never happened again.
- Frank
USA official charger
This are the images of the official USA charger that will comes when they release the device in USA
And yes its a 2.0A charger, so the SIII charger isn't appropriate for NoteII.
this is the kind of charger used in Canada, USA, and Latin America, i bought this NoteII in Mexico from an authorized Samsung provider, of course factory unlocked 710usd, like 10,900mxn.
Has anyone tried a 3A charger? Just wondering if this would speed up charging even more than the standard 2A charger.
mcdill the pig said:
Has anyone tried a 3A charger? Just wondering if this would speed up charging even more than the standard 2A charger.
Click to expand...
Click to collapse
No, it won't speed it up. It's what the device takes from a charger, and not what a charger can potentially supply. If the device's charging circuit is spec'd for up to 2A current, that's what it will suck out of a charger, not more. You can connect a 30A lab power supply, and it will still be the same 2A (or less) input. To speed up the charging process, you need to mod the charging circuit of the device itself.
One of the big concerns I had with the proprietary Dash Charging system is whether I'd be able to use previously purchased power banks.
I've been testing my OP3 with the RAVPower 26800mAh powerbank along with the Anker USB-C to USB 2.0 cable.
The powerbank is capable of outputting 2.4a, which produces a quick charge on other devices.
On the OP3, I get between 30 and 57% charge / h (measured using the Battery Monitor Widget app), which is acceptable to me.
It's not Dash Charging speed, but it'll work in case you were wondering.
MI Charger
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
quote from Android central
"For the first time, OnePlus is including a fast charging system on the OnePlus 3. Rather than go with another standard like Qualcomm's Quick Charge, OnePlus made its own "Dash Charge" system. Dash Charge promises a 60% charge on your OnePlus 3 in just 30 minutes, which is just as fast as any other system — the only catch here is you'll have to use the Dash Charger in the box and the included cable.
Your OnePlus 3 will charge just fine off of other chargers — whether they're Quick Charge 3.0, Nexus Rapid Charge or something else — but you just won't get Dash Charge speeds."
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Seemed like a good choice as outputting 3.6A would be good enough for me. Would you be able to point me a link where to purchase it from? Many thanks.
are you sure the 3.6a isnt a maximum of all the ports on the bank?
usually if they have multiple ports they say a maximum load for all being X, but I've only ever seen a maximum amperage of 2.4a on a port (few and far between) most 2.1a as stated per port.
even then they charge my OP3 at 1.2a using oneplus's cable, same as my s5 beforehand.
there is a great app on the store called Ampere which tells you your current charging/discharging amps
superbrowndude said:
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
and ?? whats the verdict ?
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Sent from my ONEPLUS A3000 using XDA Free mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Link to that powerbank please
Framedtrash said:
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Click to expand...
Click to collapse
Check my post on another thread,
You can use OPPO VOOC Powerbank,
It charge as fast as at least 3.5A
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Hastaloego said:
and ?? whats the verdict ?
Click to expand...
Click to collapse
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Framedtrash said:
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Click to expand...
Click to collapse
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
OP3 is only able to charge at 1.5A max with everything except the dash charger and cable, from my tests.
BoiBundy said:
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
Click to expand...
Click to collapse
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
crzykiller said:
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
Click to expand...
Click to collapse
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
What's the easiest way to test what amperage a non-Dash charger is charging at? I'm curious to know if some of my Quick Charge adapters will provide 2.4A. I've only done a very brief test with my QC3 car charger, but it gave me 3% in about 4 minutes. That's about what I was getting on a QC2.0 phone, and that's perfectly acceptable in my books.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Huh? that's my first comment lol and VOOC and DASH are exactly the same technology and have their specific patent. As far as I know, it will only charge with those specific chargers since it is not only the charging brick holding some proprietary charging solution but also the cable. I have a USB-C cable that can withstand over 4A but will not work even when plugged to the DASH charger. Now yes there may be a charger that quick charges this phone but it'd be very unlikely that it does exist since the cable and brick would have to have the exact specifications as the DASH/VOOC chargers.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Haha
As stated VOOC and DASH are the exact same thing, VOOC was created by OPPO and the rebranded by oneplus
No amount of software is going to change a hardware limitation
I guess your going to tell me that a dev is going to release a software patch that restores the headphone jack on a iPhone
Download ampere from the playstore if you want to get a rough idea of what your device is charging at
Sent from my iPhone 4S using XDA Free Mobile App
fp1707 said:
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Click to expand...
Click to collapse
Same question. Really interested in the Oneplus Power Bank charging results. Please.
Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you
ggkameleon said:
Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you
Click to expand...
Click to collapse
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.
lockmunk said:
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.
Click to expand...
Click to collapse
Ok thanks. I can use it no mistake but slow. I think buy a qc 3 or 4 it's good. For car I have too dash car and it's so good I loose it. I have car charger qc 2 or 3 I don't know.
Thanks
Rommco05 said:
DASH charger is good for OP, strange for others. Highly not recommended to use DASH on other devices than OP
Click to expand...
Click to collapse
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. Perfectly safe to charge anything, however not quickest charging option for others.
Rommco05 said:
RIP battery. Do u think it is good charging phone with no original charger? Especially with OP DASH
Click to expand...
Click to collapse
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.
tomsag said:
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. .
Click to expand...
Click to collapse
Bull****, the original MI 8 charge is QC 3.0 and I'm getting up to 3.3A on it.
It's very fast..
---------- Post added at 10:39 AM ---------- Previous post was at 10:36 AM ----------
Flash-User said:
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.
Click to expand...
Click to collapse
What he said.
Rommco05 said:
I see, probably u never heard about optimization, calibration and testing btw and that's isn't about fast or slow charging
Click to expand...
Click to collapse
OKay its just your opinion but my opinion is you have no insight in electrical topics or the insight of such an charger.
optimization - the charger doesn't overcharge or use an overvoltage on your phone when its not support their specific fast charge technology it simply slow down to 5v - max. 2.4A, these charging speed will never cause any damage on your phone.
its just simple: an QC phone doesnt use the benefits of SuperCharge technology or Dash Charge and vize versa....
And trust me i've done more calibration and testing in USB charging topics and their different Charging tecnologys as you think (mobile batterys, chargers and so on).
I had several phones and several chargers and compared nearly all of them (QC, FastCharge, VOOC) and there is absolutely nothing dangerous to charge a phone with a QC charger if it is a supercharge phone.
But .... you ever can prove the contrary. I'll never stop learning but you have to tell me some facts.
Is Realme X2 Pro compatible with qc 2.0/3.0?
I´m using an Aukey charger qc2.0, and when it reaches 75% aprox, it stops charging.
qc 2.0 uses 12V, 9V, 5V
I´ve made some troubleshooting, using a safety usb tester (V, A, W, etc.) and I discovered that when changing from 9V to 5V charging mode, it freezes!! and stops charging. I started at 30% battery level, charging at 9V 1.9A (17W), and reaching 75%... Intensity dropped down to nearly 0A... was no charging... I unplugged it, wait 1 min, plug it again, and it started charging again, but at 5V 1.33A (7W)...
with other mobile phones and same charger (Aukey) it changes from 9V to 5V without stoping, so I am worry if it is a problem of my Realme unit...
Can anyone confirm this?¿?¿?
Thanks in advance,
Qualcomm list doesn't include realme
https://www.qualcomm.com/documents/quick-charge-device-list
But I'm my experience should be, I'm using a zmi car charger and Xiaomi 6 port charger with QC and in both charges rapidly
At work I'm using a leeco charger, and stop charging at +/- 70%
I don't know why
Sent from my RMX1931 using Tapatalk
whocarez_pt said:
Qualcomm list doesn't include realme
https://www.qualcomm.com/documents/quick-charge-device-list
But I'm my experience should be, I'm using a zmi car charger and Xiaomi 6 port charger with QC and in both charges rapidly
At work I'm using a leeco charger, and stop charging at +/- 70%
I don't know why
Sent from my RMX1931 using Tapatalk
Click to expand...
Click to collapse
Thanks!
There must be a compatibility problem,
Maybe, if you unpluge and plug it again it will charge up to 100% (it works for me)
Let´s see if it can be solved in next software update, I will try to contact Realme support to let them know.
My charger at work also supports QC 3.0 (not oficially, LeEco Model EQ-248CN).
whocarez_pt said:
Qualcomm list doesn't include realme
https://www.qualcomm.com/documents/quick-charge-device-list
But I'm my experience should be, I'm using a zmi car charger and Xiaomi 6 port charger with QC and in both charges rapidly
At work I'm using a leeco charger, and stop charging at +/- 70%
I don't know why
Sent from my RMX1931 using Tapatalk
Click to expand...
Click to collapse
Realme is not in the list, but Oppo Reno Ace yes. and it is a very similar phone
mscano said:
Is Realme X2 Pro compatible with qc 2.0/3.0?
I´m using an Aukey charger qc2.0, and when it reaches 75% aprox, it stops charging.
qc 2.0 uses 12V, 9V, 5V
I´ve made some troubleshooting, using a safety usb tester (V, A, W, etc.) and I discovered that when changing from 9V to 5V charging mode, it freezes!! and stops charging. I started at 30% battery level, charging at 9V 1.9A (17W), and reaching 75%... Intensity dropped down to nearly 0A... was no charging... I unplugged it, wait 1 min, plug it again, and it started charging again, but at 5V 1.33A (7W)...
with other mobile phones and same charger (Aukey) it changes from 9V to 5V without stoping, so I am worry if it is a problem of my Realme unit...
Can anyone confirm this?¿?¿?
Thanks in advance,
Click to expand...
Click to collapse
Bit late to the party...
My phone does work fine with QC. Charges at 9V2.1A until about 60-70%, then drops to 5V2.1A. At about 90% it drops to 5V0.6A until 100%.
My QC3 charger from Aukey also faces this issue. Charging to 80% and then it stops... Still the same after update to c27...
This phone supports 21w charging, but it is only shipped with an 18W charger. (This charger seem to be able to give out 5V, 9 V (2A) and 12V (1.5A).)
Anyone have information on what version of USB-PD the phone supports? And what voltage is used to obtain 21w?
Has anyone got 21W charging working? As not all higher wattage usb-pd charges may support the 21W mode that this phone needs.
Well I can tell you do not use anything above Sony's recommended charging °W because anything above that - even with PD -- the device will intensely heat up.
JB2unique said:
Well I can tell you do not use anything above Sony's recommended charging °W because anything above that - even with PD -- the device will intensely heat up.
Click to expand...
Click to collapse
Sony report 21W charging. So I'm not asking to go above Whats recommended.
I am asking more about the actual charging methodology, as the usb-pd system can be a bit complicated. And even a 45W charger may not correctly 'handshake' at 21w unless it's got the right voltage to offer.
Anyone?
No one has tried using a higher wattage PD charger?
shock-UK said:
Anyone?
No one has tried using a higher wattage PD charger?
Click to expand...
Click to collapse
My Xiaomi 30W 1A1C charger (which supports USB PD 2.0 over the C port I believe) negotiates 7V/3A to hit the 21W.
JB2unique said:
Well I can tell you do not use anything above Sony's recommended charging °W because anything above that - even with PD -- the device will intensely heat up.
Click to expand...
Click to collapse
Winrahr said:
My Xiaomi 30W 1A1C charger (which supports USB PD 2.0 over the C port I believe) negotiates 7V/3A to hit the 21W.
Click to expand...
Click to collapse
Nice. That is an interesting combination. I thought it might do it at higher voltage.
How are you measuring it? I'm thinking of getting a usb measuring display.
shock-UK said:
Nice. That is an interesting combination. I thought it might do it at higher voltage.
How are you measuring it? I'm thinking of getting a usb measuring display.
Click to expand...
Click to collapse
Me too, I thought it'd be doing 12V/1.8A or something but 7V/3A makes sense. Definitely should make sure the cable is quality enough to support 3A. As an aside, the phone charges at 5V/1.5A for all non USB-PD compliant chargers.
I measured with a super cheap USB C meter that I've been sticking into random chargers for curiosity sake. Highly recommended :laugh:
Ok, ordered an Usb pd 3.0 charger today, the Arcanite one. As it also has a PPS option.
Also ordered as usb c power meter.
Let's see if it does the same voltage combination with this charger.
I just looked more into the USB-PD spec and I believe you'd need a PD3.0 compatible charger to hit the 21W since the charger needs to support PPS to hit 7V/3A. Otherwise I'm assuming it would negotiate to 5V/3A or 9V/2A if the charger doesn't have a 7V step.
So got a charger with PPS support (a USB-PD 3.0) an up to 30w charging. An Anker USB c to c cable with 60W support.
And using a satechi voltage / current measuring device.
But something isn't correct. It could be the usb-c voltage measure.
Using the supplied 18W charger, it's displaying 5.27V, 2.78A. that's roughly 15W. ( Picture attached).
Using the new 30W charger, it's displaying 6.44V, 2.77A. that's roughly 18W. ( Picture attached).
Still need to do more testing, not sure why I'm getting these readings. A bit below what I was expecting.
shock-UK said:
So got a charger with PPS support (a USB-PD 3.0) an up to 30w charging. An Anker USB c to c cable with 60W support.
And using a satechi voltage / current measuring device.
But something isn't correct. It could be the usb-c voltage measure.
Using the supplied 18W charger, it's displaying 5.27V, 2.78A. that's roughly 15W. ( Picture attached).
Using the new 30W charger, it's displaying 6.44V, 2.77A. that's roughly 18W. ( Picture attached).
Still need to do more testing, not sure why I'm getting these readings. A bit below what I was expecting.
Click to expand...
Click to collapse
What battery % is your phone at? You also have to remember that the closer the phone is to 100%, the charging speed will slow down.
I have an Anker 30W charger and can charge at speeds of at least 3500 mAh (based on Ampere reading).
The battery was around 35%. Yes you are right once it got over 50% the charging rate does show down a bit.
Also the Ampere app was displaying 3600 or 3500 as the current. But even if we calculate that, that's only about 18W. But that app isn't very good at measuring charging voltage or current.
The charger's specifications are attached below,
Actually, did anybody find a 21W charger compliant with our device??? (I mean really delivering 21W...)
Edit:
I've ordered the Samsung Ultra Fast Charge 25W (ref: EP-TA800XBEGWW)
It is PD 3.0 PPS and delivers 3.3-5.9V at 3A or 3.3-11.0V at 2.25A.
I hope that will work...
nreuge said:
Actually, did anybody find a 21W charger compliant with our device??? (I mean really delivering 21W...)
Edit:
I've ordered the Samsung Ultra Fast Charge 25W (ref: EP-TA800XBEGWW)
It is PD 3.0 PPS and delivers 3.3-5.9V at 3A or 3.3-11.0V at 2.25A.
I hope that will work...
Click to expand...
Click to collapse
I have the Samsung EP-TA800 25W charger from a Samsung Galaxy A71 5G. On low battery with my USB tester, I measured 22W (9V/2.5A) when charging my A71 but only 15W (5.5V/2.7A) when charging my Xperia 1 ii. Were you able to do better with this Samsung charger?
In fact, I have been testing all my PD chargers (about a dozen in total -- I might have a problem!), and none has been able to charge my Xperia 1 ii at more than 18W. That's certainly decent, but it would be nice to get the 21W that the hardware is capable of.
mikew99 said:
I have the Samsung EP-TA800 25W charger from a Samsung Galaxy A71 5G. On low battery with my USB tester, I measured 22W (9V/2.5A) when charging my A71 but only 15W (5.5V/2.7A) when charging my Xperia 1 ii. Were you able to do better with this Samsung charger?
In fact, I have been testing all my PD chargers (about a dozen in total -- I might have a problem!), and none has been able to charge my Xperia 1 ii at more than 18W. That's certainly decent, but it would be nice to get the 21W that the hardware is capable of.
Click to expand...
Click to collapse
I've not finished my tests, answers soon...
mikew99 said:
I have the Samsung EP-TA800 25W charger from a Samsung Galaxy A71 5G. On low battery with my USB tester, I measured 22W (9V/2.5A) when charging my A71 but only 15W (5.5V/2.7A) when charging my Xperia 1 ii. Were you able to do better with this Samsung charger?
In fact, I have been testing all my PD chargers (about a dozen in total -- I might have a problem!), and none has been able to charge my Xperia 1 ii at more than 18W. That's certainly decent, but it would be nice to get the 21W that the hardware is capable of.
Click to expand...
Click to collapse
nreuge said:
I've not finished my tests, answers soon...
Click to expand...
Click to collapse
I've finished my tests.
Both Sony charger 18W and Samsung EP-TA800 25W charger take 37 mn to charge from 20% to 70%. So, the extra power of the EP-TA800 cannot be used by our device, it does not provide the correct electrical intensity...
Finally, I've ordered the ARCANITE Premium PD 3.0 QC4 PPS 30W charger as mentionned above.
I've received the ARCANITE Premium PD 3.0 QC4 PPS 30W charger and I've done the tests.
To charge from 20% to 70%, the Sony charge takes 37 mn and the ARCANITE charger takes 36 mn (tests done in aiplane mode).
The small difference occurs below 50%.
nreuge said:
I've received the ARCANITE Premium PD 3.0 QC4 PPS 30W charger and I've done the tests.
To charge from 20% to 70%, the Sony charge takes 37 mn and the ARCANITE charger takes 36 mn (tests done in aiplane mode).
The small difference occurs below 50%.
Click to expand...
Click to collapse
Thanks for the update. It seems like the ARCANITE might not be delivering the 21W as hoped.
I also ordered yet another charger, the Baseus BS-C915, which allegedly supports PPS. The PPS designation appears in some pictures, but the specifications describe only a range of voltages (3.3-11V @ 3A).
With the Baseus, I get just under 18W (6.6V @ 2.7A) when charging my Xperia 1 ii. It's kind of strange that Sony claims 21W charging but doesn't include a 21W charger and doesn't even provide the specs for one!