Related
Hi all,
If i change my sdcard (using 32gb tutorial) and put a 1gb goldcard with unbranded Rom, it's possible to update my rom? It's impossible on my country get the correct "Y" cable (as viper tutorial).
Regards!
Unless you wanna end up with a bricked device with no warranty, no, it won't work, especially with a 1GB card!
tatarezende said:
Hi all,
If i change my sdcard (using 32gb tutorial) and put a 1gb goldcard with unbranded Rom, it's possible to update my rom? It's impossible on my country get the correct "Y" cable (as viper tutorial).
Regards!
Click to expand...
Click to collapse
Hi,
Do not kidding me, lol. It is easy to make Y-cable. Belive me !
I tried with 2 cables... Making green and white on devices (phone x usb card reader) and power (red, black) on usb or power charger and on both devices. No success :-(
Is there any special hint for this?
Thanks guy... I'm going crazy with this branded t- mo device.
Regards!
PanNet said:
Hi,
Do not kidding me, lol. It is easy to make Y-cable. Belive me !
Click to expand...
Click to collapse
Actually, i've already done a cable using a "regular" Y cable, connect data on phone and an sd card reader, and another on power (follow the tutorial schema). But... Without lucky! Is there any special cable to buy? The cable on tutorial are only avaliable on amazon uk... And don't ships to my country. Anyone can help me?
Regards,
Emerson Moraes
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
mbc0 said:
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
Click to expand...
Click to collapse
Have you tried a new cable?
Sent from my Nexus 7 using Tapatalk 2
And, in truth, if it's a hardware failure, rooted or not shouldn't matter.
One of the first diagnostics that they generally do is nvflash a stock image to eliminate software as an issue.
danvee said:
And, in truth, if it's a hardware failure, rooted or not shouldn't matter.
One of the first diagnostics that they generally do is nvflash a stock image to eliminate software as an issue.
Click to expand...
Click to collapse
Thanks for the replies, I am worried that they will see it is rooted and then charge me full price for a replacement!
And as for cables I have got 3 Nexus 7's and it is only this one that has the problem (the one that has been on the car charger)
Is there really no way of making this absolutely clean stock before I send back?
Many Thanks
mbc0 said:
Thanks for the replies, I am worried that they will see it is rooted and then charge me full price for a replacement!
And as for cables I have got 3 Nexus 7's and it is only this one that has the problem (the one that has been on the car charger)
Is there really no way of making this absolutely clean stock before I send back?
Many Thanks
Click to expand...
Click to collapse
Its a Nexus Device... When manufacturers put that tag on a device they know many people will but it to modify its software... I sent my first nexus Back with a very non stock rom on it because of the screen issue. It came back fixed with the same os on it . This was sent to Asus ..
If you have opened it or modified it physically in any way they will charge you. If its a software issue they prob will not but have a right to charge you..
but you can get back to stop.. D/load the stock image from google. to the device boot into cwm and flash it.. You will now be stock.You can then d/load stock recovery and flash that with cwm. So recovery will be stock..
Call ASUS To confirm about the above. they are quite open to talk to you .
Good Luck
mbc0 said:
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
Click to expand...
Click to collapse
Does your computer not see it in fastboot mode?
Bongobiker said:
Does your computer not see it in fastboot mode?
Click to expand...
Click to collapse
His USB port is a goner, read the OP...
Beamed from my Maguro
Mach3.2 said:
His USB port is a goner, read the OP...
Beamed from my Maguro
Click to expand...
Click to collapse
Obviously not if it charges his device. Read the OP..!
Another option is to pay ~$70 to a repair shop for them to order a new micro USB/3.5mm module and replace it.
adoweeti Dut
Hi,
This appears to be a software issue as the port will allow usb/mains charge when powered off but not when powered on, (alot of reports from other users on this after using Amazon cigarette lighter chargers like me! ) the cables/chargers have all been changed and the port itself seems fine and has never been damaged in any way but sadly I cannot use fastboot due to the USB connection issues...
Just trying to find a way to completely stock the device before sending back
erica_renee said:
Its a Nexus Device... When manufacturers put that tag on a device they know many people will but it to modify its software... I sent my first nexus Back with a very non stock rom on it because of the screen issue. It came back fixed with the same os on it . This was sent to Asus ..
If you have opened it or modified it physically in any way they will charge you. If its a software issue they prob will not but have a right to charge you..
but you can get back to stop.. D/load the stock image from google. to the device boot into cwm and flash it.. You will now be stock.You can then d/load stock recovery and flash that with cwm. So recovery will be stock..
Call ASUS To confirm about the above. they are quite open to talk to you .
Good Luck
Click to expand...
Click to collapse
Hi,
Thanks for that info, I would prefer to send back stock just to cover all bases!
I have the original stock rom from google but it is in TGZ format and I thought I could only flash ZIP format with side loading? where would I put the Standard ROM TGZ File on the device to load with CWM?
Many Thanks
The tgz format is a compressed container like zip. You can upcompress it, and I think uncompress something inside it again you will eventually see .img files that you can you to go back to stock
Sent from my Nexus 7 using XDA Premium HD app
djdunn said:
The tgz format is a compressed container like zip. You can upcompress it, and I think uncompress something inside it again you will eventually see .img files that you can you to go back to stock
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Hi,
I can see the IMG file inside the TGZ File, but how do I get to Nexus to load that?
Many Thanks
Unfortunately the only way I know how to flash recovery is with fastboot
djdunn said:
Unfortunately the only way I know how to flash recovery is with fastboot
Click to expand...
Click to collapse
That's what I thought... Thanks anyhow!
mbc0 said:
That's what I thought... Thanks anyhow!
Click to expand...
Click to collapse
Thing is.... with an OTA update, the Nexus reboots and installs without any USB connection, I would have thought it would have been possible to reproduce that?
wifi
what about over wifi
me2u2 said:
what about over wifi
Click to expand...
Click to collapse
That would be great if I could find a way!
Hello..anyones can sharing how to make otg mode work on i9000??i don't know why my i9000 cant mount my pendrives..try with other pendrives still the same,then try to change my y cable also nothing happen.I think i will be nice if someone can sharing what rom and kernel that you use to make it work.at the same time,i think the most important part is how to setup your kernel setting...can someone help me??i'm sorry for my bad english..
CHEERS,
here is one
Mafi91 said:
Hello..anyones can sharing how to make otg mode work on i9000??i don't know why my i9000 cant mount my pendrives..try with other pendrives still the same,then try to change my y cable also nothing happen.I think i will be nice if someone can sharing what rom and kernel that you use to make it work.at the same time,i think the most important part is how to setup your kernel setting...can someone help me??i'm sorry for my bad english..
CHEERS,
Click to expand...
Click to collapse
Hi!
You can use your USB devices only with power supply.
Here http://forum.xda-developers.com/showthread.php?t=1450298 You can find tutorial.
Kernel is depended on which version of Android You are using.
iluha_ua said:
Hi!
You can use your USB devices only with power supply.
Here http://forum.xda-developers.com/showthread.php?t=1450298 You can find tutorial.
Kernel is depended on which version of Android You are using.
Click to expand...
Click to collapse
Thanks mate for you'r help..finally,i can use otg mode on my i9000..the reason why i can't mount anythings on otg mode is just because of my external power supply.and today i just bought new power bank and it finally working without any problem with app usb controller..
Cheers,
Hi everyone,
I would use my mouse/usb key on my HTC desire 510. If i understood after my researches,that's not possible on all smartphone...
So, is that possible on our HTC ?
Thanks for your future answers !
yes our stock kernel supports usb otg, as well as supplying power out. i use a 32gb sandisk usb flash drive with my 510.
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
alain21218 said:
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
Click to expand...
Click to collapse
It shouldn't be much of an issue. It does that for me too but still works, do any other errors present themselves?
Sent from my XT1028 using XDA Free mobile app
Well, i just plug the otg in my phone, without other usb. It show me "Phone in USB host". I tried with OTG checker, my kernel is ok but no signal detected by the application.
I tried to turn off the phone, & remove the battery, then put in again & turn on. When i plug in the OTG, nothing appened for a moment then the cursor of the mouse that i connected in the OTG appear for just 1 second, like a flash & the message back again.
No other problems
Today i tried to make my own OTG usb to see if the problem is the phone or the OTG hama.
When i plug my own OTG usb, nothing happen. When i plug the other OTG i just get the same message i said in my previous answers, nothing else happen.
Any idea ? I don't know but is anything i have to do like turn ON USB debug or anything else ?
Edit: I got a Xperia today to try my OTG, it seems that he works well so i just need to ask: Is the HTC desire 510 64bits EU is compatible OTG ? If it is, why my phone don't recognised my OTG ?
Still need some answers here
It just not support USB HID over USB (mouse and keyboard). Could've been disabled by HTC (reason for cursor disappearing after 1 sec of plugging in).
Sent from my XT1028 using XDA Free mobile app
Hi ! Sorry for insisting but i read on official htc web site that the htc desire 510 support usb storage. So, why nothing else that the previous message happen.
I bought another OTG today & it's forever the same...
I want to bump this topic, I have european 64-bit version and when I connect OTG cable there's info shown about phone being in usb host mode but nothing else is happening.
My thought is that tey give this option to 32-bit US version and then disable it (clumsy) in european version.
Sorry for grammar, english is not my native language.
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
undeadking said:
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
Click to expand...
Click to collapse
I have two cables, both work great wirh other devices .
Hi,Have u already fix ur desire 510 problems?
I already changed 3 different otg cables, seems like the same problem as u met....Any suggestions?
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
USB OTG pops up a message in the notifications bar to let you know that you cannot simultaneously charge your device and utilise an USB device. The only reason that I can think of why the mouse cursor would disappear after a second is because you have your finger on the screen. I use my OTG with my digital camera (via Google Photos), USB Keyboard, USB Mouse, another Android device, and a 64GB flash drive almost daily, and I don't seem to have any problems.
Hello,can you please explain the details for that?
Crutchie46 said:
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
healthybanian said:
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
Click to expand...
Click to collapse
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
MrMike2182 said:
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
Click to expand...
Click to collapse
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
healthybanian said:
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
Click to expand...
Click to collapse
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
MrMike2182 said:
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
Click to expand...
Click to collapse
Australia...probably it was ordered from USA , I will ask the one who ordered this phone,,,Thanks for your help
Hi guys .. my note 5 used to work perfectly until suddenly it stopped fast chrarging and my pc fails to recognise it
I need to get twrp for many reasons but i cant get it cuz i cant reach to odin .. and there aint a working no-pc root to my note5
Can u pls teach me a way to get twrp ..thx in advance
I had a little bit same issue. I installed official firmware and it worked. My second way is changing pc. It worked too.
CanerTR said:
I had a little bit same issue. I installed official firmware and it worked. My second way is changing pc. It worked too.
Click to expand...
Click to collapse
I cant connect it to my odin so how did u get an ofw?
Tarig Elmuntasir said:
I cant connect it to my odin so how did u get an ofw?
Click to expand...
Click to collapse
Try another computer
I had this issue as well. It turns out that somehow the micro USB cable plug was slightly damaged although i couldn't see any difference with the naked eye. But anyway, this was resolved with a new cable.