A few questions after installing a custom ROM - Redmi K20 Pro / Xiaomi Mi 9T Pro Questions & Answe

Ok so i managed to follow the guide for the whole process to get the pixel experience rom on my phone, i did the full thing> Unlock bootloader, Orange Fox, DFE, Magisk and flash the rom etc.
The questions i have now that ive had it running for a few days, there was no default sounds set, is that normal?
How come it says pixel 2 in certain situations, is it based on a pixel 2 version of android 10 or just some kind of placeholder?
And do i need to flash manually to update or is it OTA? do i just flash the rom through orange fox? ie whats a basic procedure when a new rom is released, i was pretty confused with the guide on the correct process for simply updating a rom if your staying on a particular custom rom.
thanks.

Default sounds are usually never set, you can set them tho in the sound settings
As far as I know the ROM shows your original device model to every apps, except Google (I'm on Evolution X and it shows Pixel 4 for Google)
I think Pixel Experience has OTA, however to my knowledge, it won't work if ur decrypted and orangefox is not compatible with OTAs (not sure tho, but I know twrp is).
If OTA is not working, you can download the latest version from the site and dirty flash (no wipes, just flash the ROM on top of the already installed PE)
Magisk will be lost tho when you update
Hope I helped, hit the thanks if I did

Thanks, thought it was strange no default sounds were set, the last custom rom i used was on the Nexus 6 so its been awhile.
Good to know i just need to flash an updated rom over the top of it glad to clear that up, thanks for your help its appreciated.

Related

First Things To Do After Getting My Mi Mix?

Just found out that I have a Mi Mix waiting for me when I get home. I've made a checklist of what I want to do to it to get it setup for my use. I wanted to know if anyone had anything to add or has done any of what I'm planning on.
Unlock Bootloader
This should be relatively simple. I already have my unlock permission and will be using the directions from here: http://en.miui.com/thread-202290-1-1.html
As far as I can tell by reading that thread, I do not need to install the developer ROM first. Is this correct?
I will also follow the top reply to this thread which mentions linking your device to your Mi account before unlocking to prevent errors: https://m.reddit.com/r/Xiaomi/comments/5co8t1/mi_unlock_approval/​
Install TWRP
My plan is to follow these instructions: http://forum.xda-developers.com/mi-mix/development/recovery-official-twrp-xiaomi-mi-mix-t3498960
This is where I start having questions. I've been out of the rooting and ROMing game for a couple of years. Does anyone recommend rooting with anything other than SuperSU? I'm reading that it was bought by a Chinese company and shouldn't be trusted. I've also read that using Magisk you can have root that is easily turned off. I'll admit I'm pretty lost at the moment when it comes to what Magisk does and how to use it. But if it is the recommended way of doing things I will do the research to learn it.​
Flash The EU ROM
I think my plan is to flash this EU ROM which debloats everything and seems to come with gapps and a lot of other nice optimizations: https://xiaomi.eu/community/threads/6-11-10.36056/
My first question is has anyone tried this?
My second question is will I need to reinstall TWRP and re-root? I think I will have to re-TWRP because on the TWRP page there is one version for stock and one for the EU version. I will be on stock first and I can't flash EU until after I flash TWRP. So I think the procedure will have to be:
Flash stock TWRP
Flash EU ROM
Flash EU TWRP
Re-Root?
Turn Off All Battery Optimizations
Don't have a guide for this yet but I'm guessing it's not hard to find. Feel free to reply with one if you have one.​
Personalize
Launchers/Themes/Icon Packs/etc. Don't need suggestions here since I already know what I have in mind.​
Anything else?
The only other thing I can think of that I might want to install is Xposed. I've never used it and don't know how to install it but I'll learn if I can be convinced that it's something I want.
What else am I missing?​
I think right now the biggest thing I'm curious about is if anyone has used the EU ROM and what the procedure is if you use that ROM since there are 2 different versions of TWRP for the Mi Mix. But any other suggestions on what to do with the initial setup or how to make my experience better are welcome. I'd also love to hear about any "gotchas" that aren't mentioned in the guides from people who have actually done it.
Well I took the plunge without waiting for feedback and for anyone who is interested, I'll answer my own questions. Read the posts that I linked in the OP to understand what I'm doing below. I will not cover how to get unlock permission as this has been covered elsewhere.
Unlock Bootloader
As far as I can tell by reading that thread, I do not need to install the developer ROM first. Is this correct?
Click to expand...
Click to collapse
This is not correct. You must install the Dev ROM and connect to WiFi and follow the steps to enable Developer options and login to your Mi account in developer options.​
Install TWRP
Before installing TWRP you must update back to the stable ROM. The non-EU version of TWRP will not work with the Dev ROM as of this posting. You can update to the stable ROM using the same steps as updating to the developer ROM. In the TWRP install guide I linked above, I stopped right after step 6 and continued below.​
Flash the EU ROM
Instead of flashing SuperSU after installing TWRP, I copied over the EU ROM linked above and flashed that. Then I followed the instructions starting from step 3 of this post to flash SuperSU, Magisk, and suhide: https://www.reddit.com/r/pokemongod...k_v7_systemless_xposed_v866_released/d8d7ziw/
The only change I made is that in between steps 4 and 5, I flashed the EU version of TWRP before continuing because otherwise the touchscreen would not work in TWRP. I used the most recent versions for the SuperSU, Magisk, and suhide and I did not flash Xposed yet but I believe I can do that in the future if I want to.​
That's where I'm at now. The rest of my checklist was mostly personal preference so I won't go into that. Hope this helps.
@chimera533
THX for taking the plunge & sharing your results with us.
I'm sure I'll be doing the same once mine arrives, hope you don't mind if I look this way if I have any questions regarding TWRP/Root/etc.....
Thank you for posting this, this is the exact list of what I will be doing when my Mi Mix comes in the mail (C'mon Ibuygou).
I couldn't seem to find a EU rom for Mi mix though it is listed in the thread as a supported drive. Will you please drop me the link to download? Thank you.
jim380 said:
I couldn't seem to find a EU rom for Mi mix though it is listed in the thread as a supported drive. Will you please drop me the link to download? Thank you.
Click to expand...
Click to collapse
I think I got mine from here: https://megadysk.pl/f/6.11.10
Just scroll down to the Mi Mix one.
There are 3 repositories to the 6.11.10 weekly ROMs at the top of the page here: https://xiaomi.eu/community/threads/6-11-10.36056/
As far as I know there are no stable EU builds for the Mi Mix probably because it's so new.
Also I believe the weekly updates show up here: https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
The Mi Mix was skipped for 6.11.17 as evidenced by the note at the top of the 6.11.17 thread.
That's about all I know. I highly recommend reading all or most of every link I posted here. I'll confess that if I had, I would've known things like having to flash back to stable before TWRP-ing as well as some other things.
It would be nice if you did an edit of your original post, rather than a 'by the way' post below it. It would be much easier to follow the instructions.
I've installed TWRP on multiple phones. The dm-verity stuff is new to me (A xiaomi/MIUI thing I guess),
so the sequence appears to be:
install Official MIUI China developer ROM
<unlock>
install Official stable rom
install Official (Non-EU) TWRP (requires stable)
copy/install EU ROM after step 6 (aka before exiting TWRP)
< Do you reboot now and go back into fastload now? or stay inside TWRP? >
Install EU TWRP
install supersu (again, before you exit TWRP?)
Install Magisk, suhide?
Apologies but I'm away from home at the moment. I'll update the OP with more detail when I have a bit more time. But I'll give you some quick answers below.
install Official MIUI China developer ROM
Remember to log in to your Mi account in the developer options
<unlock>
install Official stable rom
install Official (Non-EU) TWRP (requires stable)
copy/install EU ROM after step 6 (aka before exiting TWRP)
While still in TWRP, install SuperSU in systemless mode.
Boot to system once
Boot back to fastboot and install EU TWRP
Boot to TWRP and install Magisk, suhide
Boot to system and install magisk manager
Got the Mi Mix 128GB overpriced in Thailand, but without any waiting time.
Love your early thread, very helpful.
I also want to get twrp, suhide, magisk and xposed, but I like to stay on the Chinese Dev or official ROM, not xiaomi.eu, because I like the paid themes which are only available on official ROMs.
I've got a MIUI developer account for 4 years, so I can unlock the device directly, being on stable ROM.
Now the steps are a bit unclear for me. Do I understand them correctly?
1. Unlock bootloader
Download and install the developer rom: http://en.miui.com/download-317.html
Create/Login with your MI Account on the device.
Apply for unlocking the bootloader here: http://en.miui.com/unlock/
Install stable ROM if desired
2. Install official TWRP (NON-EU)
Boot into fastboot mode by turning off your device then pressing volume up and power button
Install Minimal ADB and Fastboot on your PC: http://forum.xda-developers.com/showthread.php?t=2317790
Download the correct TWRP image file: https://dl.twrp.me/lithium/twrp-3.0.2-0-lithium.img.html
Copy the twrp file to where minimal adb and fastboot has been installed and rename the twrp file to twrp.img
Open fastboot on your computer and type:
Code:
fastboot flash recovery twrp.img
Code:
fastboot reboot
3. Install SuperSU in systemless mode
Download newest SuperSU: https://play.google.com/store/apps/details?id=eu.chainfire.supersu / http://download.chainfire.eu/1013/SuperSU/SR4-SuperSU-v2.78-SR4-20161115184928.zip
In ADB shell or TWRP shell, type
Code:
echo SYSTEMLESS=true > /data/.supersu
if you don't already have this file to configure SuperSU to install in systemless mode.
Flash SuperSU.
4. Boot to system
5. Boot into TWRP, install Magisk, suhide, Xposed
suhide: http://forum.xda-developers.com/apps/supersu/suhide-t3450396
systemless xposed 86.2: http://forum.xda-developers.com/attachment.php?attachmentid=3897543&d=1475913773
magisk: http://tiny.cc/latestmagisk
6. Boot to system and install Magistk Manager
magisk manager: http://tiny.cc/latestmanager
7. Install XPosed
chimera533 said:
I think I got mine from here: https://megadysk.pl/f/6.11.10
Just scroll down to the Mi Mix one.
There are 3 repositories to the 6.11.10 weekly ROMs at the top of the page here: https://xiaomi.eu/community/threads/6-11-10.36056/
As far as I know there are no stable EU builds for the Mi Mix probably because it's so new.
Also I believe the weekly updates show up here: https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
The Mi Mix was skipped for 6.11.17 as evidenced by the note at the top of the 6.11.17 thread.
That's about all I know. I highly recommend reading all or most of every link I posted here. I'll confess that if I had, I would've known things like having to flash back to stable before TWRP-ing as well as some other things.
Click to expand...
Click to collapse
Thank you so much for your help. I installed the ROM and have had it running for 2 days now. Coming from a HTC 10 (custom ROMed and everything), I;m really not digging MIUI on this phone. Lags so much it's literally driving me crazy. My 2 yrs old LG G2, which also has amazing screen-to-body ratio btw, runs circle around this phone. Really disappointed about this phone due to the software performance issues.
jim380 said:
Thank you so much for your help. I installed the ROM and have had it running for 2 days now. Coming from a HTC 10 (custom ROMed and everything), I;m really not digging MIUI on this phone. Lags so much it's literally driving me crazy. My 2 yrs old LG G2, which also has amazing screen-to-body ratio btw, runs circle around this phone. Really disappointed about this phone due to the software performance issues.
Click to expand...
Click to collapse
I don't experience any lags on the original ROM.
From my experience those micro-lags and performance issuese showed up on various devices in my Android past whenever something was wrong with the ROM. A clean flash mostly helped solve the problem.
I'm currently on the original Chinese stable with SuperSu and TWRP. It's blazing fast. What's the reason to flash the xiaomi.eu rom?
underlines said:
I don't experience any lags on the original ROM.
From my experience those micro-lags and performance issuese showed up on various devices in my Android past whenever something was wrong with the ROM. A clean flash mostly helped solve the problem.
I'm currently on the original Chinese stable with SuperSu and TWRP. It's blazing fast. What's the reason to flash the xiaomi.eu rom?
Click to expand...
Click to collapse
I had a nightmare trying to get to the EU Rom yesterday, I was mostly successful, however after a reboot i'd lose Touch in both TWRP and System. Thanks to this post from Chimera533 I was finally able to do it!
Anyway the main reason for the EU ROM is to get rid of all the Bloat and Chinese throughout the ROM that you cannot get rid of. It also has Google Services baked in properly so everything works correctly.
I also had a few other little niggles while on the Chinese ROM :-
Purchases from Google Play Movies wouldn't work
No Smart Lock while connected to Android Wear
No way to replace BAIDU and set Google as the search
So far i'm loving the EU Rom, i've not seen any lag at all while using it and pretty much everything seems to work exactly as it should - it has enhanced the MIX experience so much for me - love this thing!
Guys, how do I disable all battery saving optimizations / memory management optimzations? My background apps keep shutting automatically off after a while.
I'm on the default ROM without root (still waiting for developer approval)...
yakuzlin said:
Guys, how do I disable all battery saving optimizations / memory management optimzations? My background apps keep shutting automatically off after a while.
I'm on the default ROM without root (still waiting for developer approval)...
Click to expand...
Click to collapse
Go to the battery section & have a look around, you should find several settings for battery management.
You're gonna need root & an app such as Titanium Backup Pro, or, SD Maid Pro to disable a lot of the MIUI & Cheetah Mobile applications.
Fine tuning on a per app basis isn't enough (do not optimize battery savings for the apps you want to work properly, notifications, messaging, etc) .....
I highly recommend flashing the EU ROM, it seems to have better memory management than the Global ROM, but, you'll still need to disable a lot of the MIUI apps & all of the Cheetah Mobile s***ware to get memory management more to what you're used to experiencing.
One other item, go to Developer Options & disable MIUI Optimization, it should be the last item or close to it....

Anyone got a working TWRP for Mi 8 global? MIUI 10.

As title. I've tried like 5 different TWRP versions linked from all over the Mi 8 forums and none have worked for me. Any and all versions have made the ROM unable to boot, every restart will load recovery instead and I have to flash stock boot to get the ROM to work. Bootloader unlocked, ROM rooted by having Magisk create a patched boot cos every other way also failed.
I'm also looking for it.
ArmedandDangerous said:
As title. I've tried like 5 different TWRP versions linked from all over the Mi 8 forums and none have worked for me. Any and all versions have made the ROM unable to boot, every restart will load recovery instead and I have to flash stock boot to get the ROM to work. Bootloader unlocked, ROM rooted by having Magisk create a patched boot cos every other way also failed.
Click to expand...
Click to collapse
Currently https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745 this version working but you've to format all of your data then flash your rom. I know its not the standard solution and even I'm waiting for official TWRP for our beloved Mi 8.
You need to choose Format Data first, Reboot again to Recovery, and then flash the DM Verity and Encryption Disabler.
After that, you can go ahead to flash any ROM you like.
mrnannu said:
Currently https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745 this version working but you've to format all of your data then flash your rom. I know its not the standard solution and even I'm waiting for official TWRP for our beloved Mi 8.
Click to expand...
Click to collapse
Aw man crap, I don't want to wipe my phone againt, bootloader unlock already did it ): I'll wait for a regular version of TWRP then thanks!
motherninja said:
You need to choose Format Data first, Reboot again to Recovery, and then flash the DM Verity and Encryption Disabler.
After that, you can go ahead to flash any ROM you like.
Click to expand...
Click to collapse
Thanks! It's more work than I want to deal with now, phone just got wiped from unlocking bootloader, I don't wanna go through another 5 hours of downloading and reinstalling everything.
ArmedandDangerous said:
Aw man crap, I don't want to wipe my phone againt, bootloader unlock already did it ): I'll wait for a regular version of TWRP then thanks!
Thanks! It's more work than I want to deal with now, phone just got wiped from unlocking bootloader, I don't wanna go through another 5 hours of downloading and reinstalling everything.
Click to expand...
Click to collapse
Believe me, it worth the efforts! It would be much better than staying with crappy MIUI 10 Global Stable.
Currently, I'm with MIUI EU 10.0.6.0 Stable and I don't want to go back to stock MIUI Stable, just don't forget to install Magisk 17.2 for root access, replace the GPS.conf with your preferred country server URL (I believed it should be Malaysia) - look for a thread by @RainGater for the complete walkthrough - and although it is not necessary, it would be better to edit the default Xiaomi EU build.prop to change the region to match your country (by default it is set to Romania or some EU country, I forgot)
motherninja said:
Believe me, it worth the efforts! It would be much better than staying with crappy MIUI 10 Global Stable.
Currently, I'm with MIUI EU 10.0.6.0 Stable and I don't want to go back to stock MIUI Stable, just don't forget to install Magisk 17.2 for root access, replace the GPS.conf with your preferred country server URL (I believed it should be Malaysia) and although it is not necessary, it would be better to edit the default Xiaomi EU build.prop to change the region to match your country (by default it is set to Romania or some EU country, I forgot)
Here, I uploaded the needed files to my personal Drive account to save your time, those are the files that I use personally for my Mi 8.
Click to expand...
Click to collapse
I don't actually have a problem with my ROM. My GPS works fine, and I've already gotten root on my stock Global. Right now in my journey with Android which started with the HTC Desire Z, I don't need a custom ROM, I just need root for the occasional app that needs it I do have root now, but would love TWRP too so I can make full backups. Will check out your links regardless, thanks!

Looking to flash OK Pie on P9 Any help would be appreciated.

Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel

Good low effort way of keeping a rooted stock Mi 9T Pro up to date?

Hello,
I bought a 9T Pro in Europe for my wife and until it arrives I'm trying to research and come up with a low effort process of keeping the stock ROM up to date and rooted for her. I'm confident in manually installing and updating custom ROMs, rooting and dealing with custom ROM issues, but she is not. Therefore I thought the best thing is to use the stock ROM - not custom - since it may be the most stable experience and for me to update and re-root it for her regularly. root is mandatory because we need AdAway and other things. As I understand it, as soon as we unlock and root the phone, OTA updates for stock are impossible and maybe even dangerous. I've tried researching here but am bit struggling to come up with the right infos and I'd be glad for any advice.
Of course I have seen the great thread about unlocking, rooting, etc, but It seems that that deals with non-standard Chinese firmware pre-installed, which is probably not the case on our device. Since it's bought in Europe, I think it will probably come with some Global or EU ROM. And it doesn't answer some of my other questions.
So far my idea is roughly like this:
Phone arrives
Immediately update it via built-in OTA to latest official stock ROM
Unlock, install TWRP, root with Magisk
Use the phone
Whenever a new stock ROM comes out, download it from XDA
Flash new ROM in TWRP and root again with Magisk
Repeat 4-6 as new stock ROM versions are released
Of course regularly backup with Titanium Backup and TWRP
First of all, would this work or did I misunderstand something fundamental?
How does low level firmware / modem update come into play? Would that be included in the stock ROM packages I find here? Or do I need to manually update that separately? How do I know when I have to, since there is no custom ROM maintainer telling me when it's needed?
Is there an easier way of doing this? This process requires me to regularly check for a new stock ROM, then borrow the phone from the wife for some time to backup, update, re-root and so on. Not that convenient but it would work if there is no better way.
Sorry for the long post, but I'd be very thankful for any advice or ideas. I did quite some research, but if all this info is already available and I missed it, my sincere apologies. It's a lot of info about a new device to take in. :silly:
derfraenk said:
Hello,
I bought a 9T Pro in Europe for my wife and until it arrives I'm trying to research and come up with a low effort process of keeping the stock ROM up to date and rooted for her. I'm confident in manually installing and updating custom ROMs, rooting and dealing with custom ROM issues, but she is not. Therefore I thought the best thing is to use the stock ROM - not custom - since it may be the most stable experience and for me to update and re-root it for her regularly. root is mandatory because we need AdAway and other things. As I understand it, as soon as we unlock and root the phone, OTA updates for stock are impossible and maybe even dangerous. I've tried researching here but am bit struggling to come up with the right infos and I'd be glad for any advice.
Of course I have seen the great thread about unlocking, rooting, etc, but It seems that that deals with non-standard Chinese firmware pre-installed, which is probably not the case on our device. Since it's bought in Europe, I think it will probably come with some Global or EU ROM. And it doesn't answer some of my other questions.
So far my idea is roughly like this:
Phone arrives
Immediately update it via built-in OTA to latest official stock ROM
Unlock, install TWRP, root with Magisk
Use the phone
Whenever a new stock ROM comes out, download it from XDA
Flash new ROM in TWRP and root again with Magisk
Repeat 4-6 as new stock ROM versions are released
Of course regularly backup with Titanium Backup and TWRP
First of all, would this work or did I misunderstand something fundamental?
How does low level firmware / modem update come into play? Would that be included in the stock ROM packages I find here? Or do I need to manually update that separately? How do I know when I have to, since there is no custom ROM maintainer telling me when it's needed?
Is there an easier way of doing this? This process requires me to regularly check for a new stock ROM, then borrow the phone from the wife for some time to backup, update, re-root and so on. Not that convenient but it would work if there is no better way.
Sorry for the long post, but I'd be very thankful for any advice or ideas. I did quite some research, but if all this info is already available and I missed it, my sincere apologies. It's a lot of info about a new device to take in. :silly:
Click to expand...
Click to collapse
I didn't keep stock MIUI long enough to know definite answers, but from what I remember, this is my understanding.
OTA will still work and shouldn't cause any issues, just that you will lose TWRP and root whenever you do this.
The steps you give are the normal way to update with TWRP and root.
However, OrangeFox recovery (a heavily modified version of TWRP) is often used instead of TWRP in this circumstance. It is built specifically for MIUI devices and with a little bit of work, I believe that it is able to survive OTA updates. Have another dig around for OrangeFox in this forum section and hopefully you'll find details on how to set it up so that you can still take OTA updates.
Edit:
Found this guide https://forum.xda-developers.com/k2...efox-recovery-mi-9t-pro-t3980579/post80480669
It seems OrangeFox it's a bit hit and miss.
Also Xiaomi.eu ROMs are another alternative to look into.
Robbo.5000 said:
I didn't keep stock MIUI long enough to know definite answers, but from what I remember, this is my understanding.
OTA will still work and shouldn't cause any issues, just that you will lose TWRP and root whenever you do this.
The steps you give are the normal way to update with TWRP and root.
However, OrangeFox recovery (a heavily modified version of TWRP) is often used instead of TWRP in this circumstance. It is built specifically for MIUI devices and with a little bit of work, I believe that it is able to survive OTA updates. Have another dig around for OrangeFox in this forum section and hopefully you'll find details on how to set it up so that you can still take OTA updates.
Edit:
Found this guide https://forum.xda-developers.com/k2...efox-recovery-mi-9t-pro-t3980579/post80480669
It seems OrangeFox it's a bit hit and miss.
Also Xiaomi.eu ROMs are another alternative to look into.
Click to expand...
Click to collapse
Wow, that's a lot of helpful info, thanks a lot for pointing me into these directions. I will definitely look into Xiaomi.eu, I that sounds promising!
Get phone. Apply for unlock. Unlock.
You can use my guide bit.do/raphaelguide
Use orangefox 10.8 use magisk.
You can flash eu ROM. Stable version. From xiaomi.eu
Eu rom installs official twrp after install. You are familiar with that
Once you have eu ROM ( same as stock, better performance, minimal bloat, no ads, no tracking)
Eu ROMs gets OTA, keeps root. This is exactly what you want. Just press update in settings as normal ota. It'll do normal ota update by itself, no titanium, migrate hassle.
Join telegram group if you want or on me for any help.
Sandeeep Kiran said:
Get phone. Apply for unlock. Unlock.
You can use my guide bit.do/raphaelguide
Use orangefox 10.8 use magisk.
You can flash eu ROM. Stable version. From xiaomi.eu
Eu rom installs official twrp after install. You are familiar with that
Once you have eu ROM ( same as stock, better performance, minimal bloat, no ads, no tracking)
Eu ROMs gets OTA, keeps root. This is exactly what you want. Just press update in settings as normal ota. It'll do normal ota update by itself, no titanium, migrate hassle.
Join telegram group if you want or on me for any help.
Click to expand...
Click to collapse
Amazing, I have taken a look at Xiaomi.eu already and decided to try that. But what you're saying sounds even much better than what I expected. Thank you very much too, I will definitely go that route.

Multiple problems with custom roms - URGENT

Hello everyone, try to install several custom roms, there is no tutorial that explains how the rom and twrp are installed. There are many tutorials and they all contradict, some say do this, others say do the other, but all fail.
Twrp boot, flash rom, install custom rom on SLOT A, install TWRP on slot B.
PROVEN ROMS:
PixelExperience:
Very low call volume, impossible to fix.
LineageOS:
Does not start play store, does not allow login to accounts, does not allow to install gapps.
- CURRENT ROM--
Evolution X:
Does not start play store, does not allow login to accounts.
I have been installing customs roms for years and this device is costing me my life. HELP
The most users get in trouble with A/B devices because they don't know exactly the differences between A-only and A/B partitions.
You don't know how to install TWRP? Why? On twrp.me you can find a detailed instruction for every single model.
A custom ROM is always a .zip file and you can flash a .zip file via TWRP. If you flash a ROM while slot _a is set as active you will install the ROM on slot _b. That's all. That is the meaning of semless updates.
Every new ROM must contain a own boot.img. A new boot.img will delete TWRP and Magisk. TWRP is a recovery and A/B devices don't have own partition for recovery. The recovery is merged in the boot partition.
Also Magisk uses the boot.img to patch the ramdisk. Flashing a new boot.img means you override the patched ramdisk with a new own. As a result you need a new Magisk installation.
my recommendation is starting from scratch with a clean stock 10 install then trying again...
lineage wiki probably has the best install instructions https://wiki.lineageos.org/devices/lake/install but also check its forum thread https://forum.xda-developers.com/g7-plus/development/rom-lineageos-17-1-t4076569 for other recommendations . if you want evolution X read the instructions in its thread https://forum.xda-developers.com/g7-plus/development/rom-evolution-x-4-1-69-moto-g7-plus-t4081731 as well but there pretty much the same.... you've probably went threw those threads already based upon you saying you have tried 3 diff roms already, but try again from a clean install of stock 10 (IF you want to run a 10 rom). i know it's not really a "clean/easy/simple" solution/tutorial, but with this device there is some trial and error for getting a half assed working install. however MAKE SURE you are on a stock 10 rom when installing a 10 rom, pixel experience is a 9 rom and that could be part of your problem. moving from android 10 stock, to a 9 rom, then back to a 10 rom will lead to issues. or a 9 rom, to a 10 rom, without moving to stock 10 in between will lead to problems.
as this isnt nearly a widely adopted device, custom rom development and support isnt even close to other devices, so expect bugs. i've always ran cfw's on all my devices ever since the htc g1/dream days, this is my first device i've stuck with stock due to the lack of rom development, lack of widespread use and people actually wanting to use cfw and users to bug report, and stock being more stable... but your mileage may vary. also no disrespect meant towards the hard working dev's who do work on this device, keep it up.
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
prodigy90 said:
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
Click to expand...
Click to collapse
yeah it seems to be pretty finicky getting a good install and gapps seem to have issues. reading all the posts in the lineage17 thread just make me cringe. as much as i'd love to use lineage as my daily driver (or evo X) my days of willing to put up with a buggy rom and daily dirty flashing have come and gone. this was my first, and will be my last, moto device for the the simple fact it just doesnt have the user base and its development is stunted, compared to more widely used devices.
i hope you get something working, the lineage17 thread definetly has some good advice on what people have done to get a working install, should be able to apply flash order etc to a evoX install (minus having to install gapps for evoX)
solved
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
prodigy90 said:
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
Click to expand...
Click to collapse
yup, the LMSA is a great tool for sure. glad you got back to a clean stock install.

Categories

Resources