Hello guys,
Recently my Huawei P9 EVA-L09 kind of stopped working the screen, it blinks and goes black, both at boot and while it is on, and sometimes it worked for a few seconds, but now it doesn't work anymore.
I saw in some forums that it may be the phone's cache that is full, but I can't clean it because the screen looks like this. And even if she wasn't, a few months ago I tried to root my phone, but the TWRP switch went wrong and he kind of is out of TWRP. But the Bootloader is unlocked.
So I found Method 2 in this DC-Unllocker tutorial:
https://www.dc-unlocker.com/DC-Phoen...epair-tutorial
And this tutorial in XDA forum about how to unbrick the EVA-L09 with DC-Phoenix:
https://forum.xda-developers.com/p9/...oenix-t3560577
So before I buy the "DC-Phoenix + HCU timed license", I need to ask if I am on the right track and can it probably solve my problem, or am I on the wrong track?
I ask because I am not very familiar with this area!
There is also this thread on the XDA forum, but it needs an SD card (which I don't have):
https://forum.xda-developers.com/sho...08&postcount=7
And this thread that uses the Test Piont, but i've never use something like that, so I'm not so sure:
https://forum.xda-developers.com/p9/...d-fpr-t3997631
And if you knows any other tutorial that can help me better I'm fully open to accept help!
Related
Hi,
I just received my phone today and somehow I managed to brick it. I don't know how this happened as I was only trying to fix a common issue I was having with my google play store ("download pending"). I didn't uninstall anything as I didn't even root my phone. I just disabled some apps like the browser and now im stuck at the zuk logo boot page. I got into the bootloader page and it's asking me for an update.zip file. can anyone please help with this?
thanks
well, at least you can still enter the bootloader page, which means the phone is still alive. Which zuk do you have? Did you try reboot? How many times?
hi thanks for the reply. i tried rebooting more than ten times for sure and i am sure i didn't disable any important apps. My model is the Z2. The model number is Z2131 on the box.
I also tried flashing the phone with a new rom as per instructions on another thread but its only showing no port available and when it sometimes shows something its not qualcomm snapdragon as it said in the thread.
Can someone please help. I'm getting desperate now. I flashed a Nougat build a little while ago but had some issues with Bluetooth and NFC so I flashed back to the original firmware using the dload folder and 3 button method. The installation seemed to go through fine but get's stuck booting at the vodafone logo. It then takes me into eRecovery where it attempts to download latest version over wifi but fails. I don't really know where to go from here because I can't access the internal sd card because the phone won't boot. I can access fastboot but don't really know what to do from there.
stevemacer10 said:
Can someone please help. I'm getting desperate now. I flashed a Nougat build a little while ago but had some issues with Bluetooth and NFC so I flashed back to the original firmware using the dload folder and 3 button method. The installation seemed to go through fine but get's stuck booting at the vodafone logo. It then takes me into eRecovery where it attempts to download latest version over wifi but fails. I don't really know where to go from here because I can't access the internal sd card because the phone won't boot. I can access fastboot but don't really know what to do from there.
Click to expand...
Click to collapse
Stevemacer10 Hello, I hope to be keen to help, because it happened to me the same thing, with two days of stomach ache for it. In wanting to load Android on my Nougat Huawei P9 Plus VIE-C02, with VIE-L09C605B354 and VIE-L29C185B320 I went into semi-brick or brick, or was only in bootloader, the screen with the green man to speak. No avail various ways, including via microSD-Fastboot or ADB to do restart your phone. Then, to my previous experience with a Huawei tablet, I logged on to the 'https://www.dc-unlocker.com/' site, and essend already registered, I bought 15 credits (15 Euros), for the 'option' DC Phoenix Firmware write ', valid for 72 hours, in addition to the program and downloaded the' DC program Phonix v29 '(https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial) following the related tutorial. Obviously procured the original firmware 'VIE-L09C02B133' or even lower versions, you'll have to unpack in a folder of your preference. Unfortunately, despite having used with DC Phoenix the original firmware was always also blocked me. At that point I wanted groped with a firmware that you can find on the same site of the DC-Unlocker (https://files.dc-unlocker.com/user.html?v=files/57694006a60d7) by downloading the firmware 'VIE_AL10B_M00A063_Factory_firmware_China_Nonspecific_Android_6.0_EMUI_4.1 .dgtks', which I loaded with DC-Phoenix on the phone. Rebooting of a minimal mode of andorid, I did not see well either. I went back into bootloader, as well as devone be made the previous steps that I have already described to you, and this time with DC-Phoenix I loaded on the phone firmware L09C02B128 and everything went well. Attention and keep in mind that just as I happened to me, the serial number of your phone is changed, to me has happened in '0123456789ABCDEF' and there was no way to change it, so as, while having the unlocked bootloader can not longer charge the TWRP recovery in order to then have root permissions. Until reading the paragraph '(Optional) Phone numbers REPAIR', I went to that point on the site 'http://hcu-client.com/'. Also here are sadly bought 8 credits (8,00 Euro) in order to work with the program 'HCU-Client v1.0.0.0115', you need to download and unpack, then follow the various instructions, which are not difficult when you have to be walked through the modding, otherwise you do even more damage. Let me know what you did and how it went to the method. I hope also good for you. In summary we want Euro 15 for Phoenix whose duration of operations applies to 72 hours and 8 Euro per HCU-Client, it can only use this for 24 hours.
P.S .: Obviously if you follow my instructions and all these signs you do so at your own risk, esonerandomi from every possible and accidental deterioration of the situation and the damage to your phone. Sorry for my English, whose translation has made Google translator.
---------- Post added at 12:59 AM ---------- Previous post was at 12:33 AM ----------
I wanted to say that the change of the serial number does not work well. The serial number has been changed from what I've shown you above, but was not put one I added that I had from the sales box. I write support and maybe let you know what they tell me. See you soon.
Hi Grlshia,
Thanks for getting back to me. It's such a minefield playing with all these different regional variants. I have though, managed to get it completely fixed. I just gave in and took it into the local Vodafone store and fortunately there happened to be one of the tech experts in there that owned a P9. He took it off me and within about 5 minutes he had completely restored it. He told me he just did a factory reset by holding down vol+ and power. I'm sure I had tried this myself to no avail previously but that's what he said he did.
stevemacer10 said:
Hi Grlshia,
Thanks for getting back to me. It's such a minefield playing with all these different regional variants. I have though, managed to get it completely fixed. I just gave in and took it into the local Vodafone store and fortunately there happened to be one of the tech experts in there that owned a P9. He took it off me and within about 5 minutes he had completely restored it. He told me he just did a factory reset by holding down vol+ and power. I'm sure I had tried this myself to no avail previously but that's what he said he did.
Click to expand...
Click to collapse
Stevemacer10 hello, I'm glad you've solved the problem. Unfortunately I'm still fighting because, for now I can only and even to load its firmware, but if you want to try to load the TWRP recovery for later obtain root permissions, it always fails. From what seems to understand me and certainly due to the fact that the bootloader unlock code now is different from what I have, because as I told you the serial number has changed and if I request a new unlock code, it stops notiziandomi the procedure that there is inconsistency between this number and the IMEI. For now I do not know what to do and how to proceed. I hope that over time can still solve my problem. A good evening to you :good:
i'v been throw it
after updating my p9 plus with a firmware that is not sutable to my area
my phone restarted and ask for an account wich ok but the problem was that the software not working properly and missing a keyboard.
and will not go to recovery mode to try another software.
this sloved by downloading a sutable correct software and unzip it into an SD card folder (i create) called dload, then swich off the device and turn it back on while holding three bottons (power+v up+v down) 10 to 15 sec. and the phone directly read from the SD card and start updating a new firmwarw.
try it.
it success with me , hope it work wth u
Hi still a newbie so please bare with me.
Have tried s hard reset no joy because it's saying that my P9 your device has failed verification and may not work properly.
This was after updating to 7.0 which worked for about 10 mins then this happened
Any help much appreciated thanks
Dc phonix is good software for all the problems
1. Are you or have you ever been rooted? if yes then see question 2. If no then you have bricked your phone somehow, need to restore using one of the methods described in the various threads in the forum. Download official image, use dload method etc.
2. Does the phone boot to Android? If yes then that message is normal. If no then see question 3
3. You need to restore the original boot image and relock your bootloader. If you don't know how to do either or what any of that means then refer to the alternative answer in question 1 and then stop messing with your phone until you learn how to do literally everything with it using the forum.
I realise that sounds harsh, but it's the truth. Too many people bricking perfectly good phones because they don't care to read or learn before they act.
My suggestion would be to rollback and flash b136 on MM then update.. but ensure u are on C432
Enviado desde mi EVA-L09 mediante Tapatalk
Dear All!
Here is one desperate guy turning to you because I see from some XDA posts, that you know about twrp and Huawei devices quite something.
At first, I don't want to waste your time. If you can help me, I will be happy to compensate it because I'm quite serious on this (and desperate as well).
I'm a beginner on Android rooting world, and in a nutshell, I enjoy just putting my Android device to the limits and enjoy using them to the fullest.
Bad thing, that I sometimes take too much risk and this time it ended with a (Soft) bricked phone.
The phone is from a rental company, that is why I'm so stressed to get it back and going.
So getting to the point:
Device: Huawei P10, VTR-L29C432B123
(C432, as I understand, is European version and it's important here)
Current state: Device is unlocked, rooted and with TWRP 3.1.1. (TWRP installed by this post https://forum.xda-developers.com/p10/development/testers-twrp-t3585256 and rooted by this post https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946)
After installing TWRP and Rooting device I happily enjoyed using it for some time but
things went wrong when I started to try to put back Stock rom. (+ unroot and lock the device as well).
I tried multiple posts on the internet and didn't succeed. Unfortunately, FLashify and alike apps didn't work (or crashed after installing) on my P10, therefore, I turned to TWRP.
At first, I tried to install stock firmware downloaded from Firmware Finder but TWRP put out error:
E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip '/external_sd/dload-draft/update.zip
Then I tried some other ways and turned to wipe section. Deleted Catches and data and then also system. This I believe f-ed things up and (of course) I could not boot anymore.
Can you instruct me on installing Stock rom for my device and get it back and running?
Thank you very much and please let me know if some more info is necessary!
@paratox @OldDroid @XePeleato @Dejan Kruljac Guys, if you could take a look on this and give me a direction - I would be enormously thankful!
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
What does it mean to debrand a device?
It helped. Jeezh
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Jaunpetrovics said:
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Click to expand...
Click to collapse
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
M1chiel said:
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
Click to expand...
Click to collapse
He's right. My P10 had no os installed no recovery and the huawei e recovery wasnt working, this thing will fix the most bricked of phones. 10/10 would brick again. :good:
Would my phone work ?
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
edit : I have relocked my bootloader which leaves me no TWRP
Would this also work for me (VTR-L09)
I bought the phone from Vodafone Australia and I am stuck in erecovery right now, when I try to update through the dload using a FAT32 sd card the update.app won't even copy onto the sd card as it is larger than 4GB. When I try to do it using an sd card formatted to NTFS it stops at 5% and states "software install failed!"
Please help me on what to do... any help would be appreciated
Huawei P20 lite dead
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
YulmarRSA said:
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
Click to expand...
Click to collapse
I can assume that your memory is out of order.
I understood correctly, when you turn on the cubes? You did not flash board firmware?
Hello fellow members of the forum, first of all forgive my nefarious English. I have never posted in this forum although I have read it a lot, but I have a problem, a few months ago I tried to pass my Huawei P10 L09 to DualSim and before touching the OEMInfo or anything else in danger, I changed the signature to another original by means of TWRP following a tutorial, I remember from this forum or HTCManÃa, I do not remember right now. The rom was installed and it did not turn on again, neither in fastboot nor in erecoverý nor in TWRP, the computer detects it as "USB SER".
I have read the payment program "DC-Unlock" and I do not know if it will get me the P10 of this long lethargy in which it is submerged ...
I beg you help. Thanks for everything!