Related
So I had trouble installing Viper through Magisk on Pie on my Exynos Note 9. It always told me to reinstall the drivers, but that didn't seem to work.
But I found a solution:
On XDA-Labs is a new version of viper available (Version 2.6):
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Simply install this version (I chose the beta), give it root permissions and you are set!
I also installed audio modification lib from Magisk to be on the safe side.
Only issue I noticed is that YouTube videos seem to hang for a few seconds before they start playing (I am using YouTube vanced from Magisk). Apart from that everything seems to be working well!
Hope that helps everyone who is having trouble on Pie!
It isn't asking me for root permission?
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Rowe90 said:
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Click to expand...
Click to collapse
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
aussiesausage said:
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
Click to expand...
Click to collapse
Yeah it needs root to put itself into some system files.
I just saw they released an update yesterday which is know marked as stable. (version 2.7). Maybe you have better luck with that.
It was working on 2.7 but it suddenly stopped
Now it's not enabled and not processing
Don't know how to fix
(Btw on Samsung Galaxy A8)
This was the only thing that worked. I've been trying different things and searching for hours. The stable version does not work on my exynos note 9. The beta does though!
It calling me all time for the driver. I do that every time and I give him magisk root to do that. Any suggestion?
Did i get here some help or not? Then i looking maybe for a other Forum...
Install as system app and allow it to install through the not recommended settings.
U now have to delete it and reinstall it.. Watch the instructions in the thread pls before you become sow passive agressive mate. It is not our fault, ok?
Use this module. Flash in Magisk manager. Choose latest driver, material app, system app, lib workaround, and choose no for the last. (I don't remember what was it)
Hi, I've a Mi9 and tried to install Viper4AndroidFx.. Installation ok, driver installed, but no effect.. tried to set all to highest value to ear some difference but nothing..
Uninstalled it, i tried Viper4Android Legacy, installed as system app and by magisk and chosen all installation option with up volume button..
But still no difference with the stock speaker.. can you help me?
I would like to encrease the volume during a calling. thanks bye
take a look on mi8 or mi a1 forum in xda, there is described exactly which modules in Magisk must be installed to allow a proper function of the ViperFX. Still bootloader locked, so I cannot support by then.
catalindobre said:
take a look on mi8 or mi a1 forum in xda, there is described exactly which modules in Magisk must be installed to allow a proper function of the ViperFX. Still bootloader locked, so I cannot support by then.
Click to expand...
Click to collapse
my bootloader is unlocked to flash magisk, why it doesn't works with unlocked bootloader?
nikzodiac said:
my bootloader is unlocked to flash magisk, why it doesn't works with unlocked bootloader?
Click to expand...
Click to collapse
It only works with unlocked BL ofc. Did you tried installing "Audio Modification Library", and "Audio Compatibility Patch" from Magisk repo?
darek1995 said:
It only works with unlocked BL ofc. Did you tried installing "Audio Modification Library", and "Audio Compatibility Patch" from Magisk repo?
Click to expand...
Click to collapse
no, what I've to do exactly? I'm not an expert of modding.. thanks
make sure to have installed Magisk Manager, also latest Magisk root installed via TWRP. After this it should be pretty simple, look for the afore mentioned modules in Magisk install them one by one (each single one might require a reboot). After installing them you may install ViperFX, (version 2.3.4 as a system app).
catalindobre said:
make sure to have installed Magisk Manager, also latest Magisk root installed via TWRP. After this it should be pretty simple, look for the afore mentioned modules in Magisk install them one by one (each single one might require a reboot). After installing them you may install ViperFX, (version 2.3.4 as a system app).
Click to expand...
Click to collapse
hi, I tried to do everything you said, no one difference..
in a few days when the unlocking time will end will try it myself and in case will make it work, I will post here the process steps.
You have to install the legacy version with lib workaround. For me its working or you can try the rootless version from team_dewitt (look here in xda for it) you only need twrp and init.d injector.
Try this one.
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
Just to install the apk, nothing else.
Working here like a charm
Hi, I tried the version linked by pokko, it works, but I can't find the way to encrease volume, it works just to have a lower volume, If I set the master volume value higher it doesn't encrease, seems like the stock volume.. is there a way to have an higher volume for the speakers?
thanks
2.7.0/2.7.1 working great on MIUI but with GSI roms it's a different story
if someone can tell me how to get an higher volume please let me know soon.. I'm really thinking to remove root frome my phone.. I've found no one good reason to have it, I don't want to change rom, so I did it just to have 3 things: adaway, encrease volume and use ps3 controller with bluetooth...
adaway doesn't block anything in site that I tried it,
with viper4android my speaker volume is still the same..
miui seems not compatible with ps3 controller.. sixaxis compatibility checker can't works with bluetooth..
the only good thing I've found is the modded youtube version with no ads and background player.. but I've seen exist a versione for no rooted phones too..
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Hellsblade said:
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Click to expand...
Click to collapse
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Wow great.
It works again. I'm what they call a happy camper ?
NB: My setup picture for my Sony WF1000 in ears. I use an old studer.irs for convolver. 2 ms deferential sound. Balance a little to left for compensation and viper clarity natural...
Thanks for helping me out.
Good evening, you can tell me how I update my realme x2pro to c27 and the rooted, I'm on the c11 rooted version and twrp installed, I did not want to update it to Android 10 not to lose the fingerprint, but now that they are fixed the problem on c27 I would like to update it. If there's someone who can help me and give me a link to a tutorial, I haven't found here on xda a tutorial that explains the root and installation of twrp. Thank you
---------- Post added at 01:45 AM ---------- Previous post was at 01:44 AM ----------
Hellsblade said:
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Click to expand...
Click to collapse
Good evening, you can tell me how I update my realme x2pro to c27 and the rooted, I'm on the c11 rooted version and twrp installed, I did not want to update it to Android 10 not to lose the fingerprint, but now that they are fixed the problem on c27 I would like to update it. If there's someone who can help me and give me a link to a tutorial, I haven't found here on xda a tutorial that explains the root and installation of twrp. Thank you
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
This should not disable stock dolby atmos options right?
adsubzero said:
This should not disable stock dolby atmos options right?
Click to expand...
Click to collapse
No it doesn't, but I turn it off anyway because it's adding a bit too much for my liking.
Hellsblade said:
No it doesn't, but I turn it off anyway because it's adding a bit too much for my liking.
Click to expand...
Click to collapse
Ah yeah I mean I like to use the movie preset when playing though speakers, so that's great.
Do you guys have any issues with system sounds and ringtone? If I'm not using a convolver it's fine, but with convolver active there are unusual sound glitches and audio pops.
adsubzero said:
Do you guys have any issues with system sounds and ringtone? If I'm not using a convolver it's fine, but with convolver active there are unusual sound glitches and audio pops.
Click to expand...
Click to collapse
No problems with system sounds here.
I'm using convolver with studer -1db irs.And output gain on minus 6.
Hellsblade said:
No problems with system sounds here.
I'm using convolver with studer -1db irs.And output gain on minus 6.
Click to expand...
Click to collapse
Could you please go into sound settings and then change the media volume slider so it plays that short sound? Nothing weird happens for you?
adsubzero said:
Could you please go into sound settings and then change the media volume slider so it plays that short sound? Nothing weird happens for you?
Click to expand...
Click to collapse
Yep there is always a bit of lag before the driver kick's in when playing media audio. Also when you start playing music. I don't think there's a solution for that.
I think I just got used ?
Hellsblade said:
Yep there is always a bit of lag before the driver kick's in when playing media audio. Also when you start playing music. I don't think there's a solution for that.
I think I just got used ?
Click to expand...
Click to collapse
Ah yes that's the thing, but the problem is when receiving notifications from different apps.
For instance I get a notification from Viber and there's a slight pop, but then I receive a notification from Facebook and first it plays the remaining sound from Viber then from FB and it sounds really messed up.
It's sad if there's no solution, but I guess I'll keep investigating.
Though I don't think there's no solution, since this always worked fine for me, previously on Nexus 6P, LG V30 and HTC 10.
Btw, my suggestion for the SRS_1_1_Normal_stereo.irs convolver.
Edit the EQ to something like -2dB for the bass freq and -4dB for 4KHz, the rest is up to you.
It gives incredible deep bass and better bass response to the speakers.
Edit: the partial solution for the mentioned issue is to enable attach audio effects option in V4A. I'm not sure if it works for every audio player, but it works with Poweramp. What it does is it disables V4A processing for everything but the music player. The drawback to this is when I'm listening to something in Poweramp and want to play something eg. on YouTube, there is no sound at first. It works okay when I stop/close poweramp. For my usage this is kind of fine I guess, so I thought I would share.
hello everyone and thanks for the explanation everything works correctly now
I don't know if it only happens to me or if it is normal, when I close the multitasking v4a application it stops working, I tried turning it into a system application but the same thing happens, can you help me with that question?
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
why i cant find xda version apk anywhere ? other versions doesnt work
peymanbeyraghi said:
why i cant find xda version apk anywhere ? other versions doesnt work
Click to expand...
Click to collapse
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
thanks , i have fixed it , i forget to install selinux on magisk . after that all versions works fine .
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
Hey, I have used this method previously to install V4A, but I can't get it working anymore. After trying out custom ROMs, I've gone back to clean RUI 1.0 C38, and following the same steps the V4A doesn't work. Has anyone found a reliable way to install V4A?
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine
yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.
Hast everyone a sollution for running the sky Go App on rooted phones?
Skygo doesnt Work... hast anyone a sollution?
eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com
^ Title. I've tried several roms, both on android 10 and android 11. If I install the drivers through the viper4android app, it breaks my wifi, wifi doesn't even turn on after installing it.
Is there any fix for this?
Use a custom kernel
Dinnerb0ne said:
^ Title. I've tried several roms, both on android 10 and android 11. If I install the drivers through the viper4android app, it breaks my wifi, wifi doesn't even turn on after installing it.
Is there any fix for this?
Click to expand...
Click to collapse
Have you tried to install the drivers for at v4afx-rootless from @Zackptg5? For me works fine.
sfairmm said:
Have you tried to install the drivers for at v4afx-rootless from @Zackptg5? For me works fine.
Click to expand...
Click to collapse
Do install by TWRP.