^ Title. I've tried several roms, both on android 10 and android 11. If I install the drivers through the viper4android app, it breaks my wifi, wifi doesn't even turn on after installing it.
Is there any fix for this?
Use a custom kernel
Dinnerb0ne said:
^ Title. I've tried several roms, both on android 10 and android 11. If I install the drivers through the viper4android app, it breaks my wifi, wifi doesn't even turn on after installing it.
Is there any fix for this?
Click to expand...
Click to collapse
Have you tried to install the drivers for at v4afx-rootless from @Zackptg5? For me works fine.
sfairmm said:
Have you tried to install the drivers for at v4afx-rootless from @Zackptg5? For me works fine.
Click to expand...
Click to collapse
Do install by TWRP.
Related
I'm trying to flash Xposed on my device (its an mtk6735 device, using a custom rom ported from the meizu m2, android 6.0), I've tried installing xposed but whenever i try to do so, xposed installer says that xposed is installed but not active, I've tried researching about the issue and tried the common fixes suggested on XDA and other forums, to no avail. One clue that I do have is that my device is an arm64 device but when i try flashing the arm64 zip, it says that my device is arm hence i should use that zip, I'm sure mine is an arm64 device cause I've researched and used apps to confirm it, so to flash xposed i used the arm zip but that causes the issue "xposed is installed but not active", my theory is that since it thinks its the wrong processor it doesnt work properly on my device, any help would we appreciated greatly, thanks.
Have a look here http://forum.xda-developers.com/xposed/xposed-framework-89-0-systemless-t3723850
Tried all of that, doesnt seem to work...
simply the most awesome said:
Tried all of that, doesnt seem to work...
Click to expand...
Click to collapse
Might try to change the custom rom If available or go back to stock to flash xposed.
That's gonna be alot of work just to get Xposed working
Try soft rebooting from Xposed Installer app if it reports Xposed Framework is inactive.
simply the most awesome said:
Tried all of that, doesnt seem to work...
Click to expand...
Click to collapse
As the title states ...v4a is it compatible with pie? Im rooted running a custom rom rooted with magisk. Installed v4a thru magisk manager it installs but i get the install driver /re-install driver message everytime. Is it an workaround to get it working?
recepo1 said:
As the title states ...v4a is it compatible with pie? Im rooted running a custom rom rooted with magisk. Installed v4a thru magisk manager it installs but i get the install driver /re-install driver message everytime. Is it an workaround to get it working?
Click to expand...
Click to collapse
working fine here. maybe a root/magisk issue.
bober10113 said:
working fine here. maybe a root/magisk issue.
Click to expand...
Click to collapse
What rom are you on and which version of magisk are you running?
recepo1 said:
What rom are you on and which version of magisk are you running?
Click to expand...
Click to collapse
infinity rom.
magisk v18 and also newer test canary builds.
but prety sure its an issue where you don't wait 3 minutes after rebooting before doing actions that require root.
and not sure to which extent you tried to make magisk work with various files and mods but maybe you should just factory wipe and try and get magisk working before anything else. also mayke sure busybox is installed. and dont forget that 3 minute rule after a reboot.
bober10113 said:
infinity rom.
magisk v18 and also newer test canary builds.
but prety sure its an issue where you don't wait 3 minutes after rebooting before doing actions that require root.
and not sure to which extent you tried to make magisk work with various files and mods but maybe you should just factory wipe and try and get magisk working before anything else. also mayke sure busybox is installed. and dont forget that 3 minute rule after a reboot.
Click to expand...
Click to collapse
Thanks im sure it maybe an magisk issue im running 17.3 because i kept losing root on v18. I acquire root with v4a but it freezes and then keeps telling me to reinstall driver after reboot. I will try the 3 minute rule though..thank you. You installed v4a directly thru magisk or flashed a different version?
recepo1 said:
Thanks im sure it maybe an magisk issue im running 17.3 because i kept losing root on v18. I acquire root with v4a but it freezes and then keeps telling me to reinstall driver after reboot. I will try the 3 minute rule though..thank you. You installed v4a directly thru magisk or flashed a different version?
Click to expand...
Click to collapse
v3.3 on magisk dated of jan. 16th.
use aroma option. it will reboot on its own from magisk console and the just follow the automated steps in recovery
bober10113 said:
v3.3 on magisk dated of jan. 16th.
use aroma option. it will reboot on its own from magisk console and the just follow the automated steps in recovery
Click to expand...
Click to collapse
Thank you appreciate your help i will give it a try
I have tried everything for hours to get viper4android to work with no avail until now. Go to the xda download page and select the beta version. Boom. It works. I know you might have long forgot this or already figured it out but I had to share
old legacy magisk module has been working for months and months.
So I had trouble installing Viper through Magisk on Pie on my Exynos Note 9. It always told me to reinstall the drivers, but that didn't seem to work.
But I found a solution:
On XDA-Labs is a new version of viper available (Version 2.6):
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Simply install this version (I chose the beta), give it root permissions and you are set!
I also installed audio modification lib from Magisk to be on the safe side.
Only issue I noticed is that YouTube videos seem to hang for a few seconds before they start playing (I am using YouTube vanced from Magisk). Apart from that everything seems to be working well!
Hope that helps everyone who is having trouble on Pie!
It isn't asking me for root permission?
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Rowe90 said:
Strange.
But you are rooted with Magisk and have Magisk Manager installed?
Is the app showing up in Magisk Manager under the SuperUser section?
Maybe trying to install the app again solves your issue.
Click to expand...
Click to collapse
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
aussiesausage said:
Correct, and nope it isn't showing up in the superuser section. Re-installing did nothing, it isn't working without root, atleast that's why I think it isn't working.
Click to expand...
Click to collapse
Yeah it needs root to put itself into some system files.
I just saw they released an update yesterday which is know marked as stable. (version 2.7). Maybe you have better luck with that.
It was working on 2.7 but it suddenly stopped
Now it's not enabled and not processing
Don't know how to fix
(Btw on Samsung Galaxy A8)
This was the only thing that worked. I've been trying different things and searching for hours. The stable version does not work on my exynos note 9. The beta does though!
Has anyone got Viper4android working on Android 10 (MIUI EU ROM)? I tried everything and nothing is working.
When I install the magisk module and launch the app it says to install drivers. I press install and my phone reboots and when I launch the app again it asks again.
Can anyone that installed it tell me how they did it?
try:
freeze AudioEffect/Music fx
or
turn on Attach audio affects
turn on Compatibility mode
then install driver again
I had the same problem but type "viper4android working Q" on google and checkout The Custom Droid's tutorial, it worked for me.
QuickscopeD said:
I had the same problem but type "viper4android working Q" on google and checkout The Custom Droid's tutorial, it worked for me.
Click to expand...
Click to collapse
It worked thank you so much
Has anyone managed to get viper working for any devices on OneUI 4.1 SELinux Enforcing? I tried everything but nothing worked, and I don't want to set SELinux to permissive. Help is appreciated
I haven't tried installing it on OneUI devices, but had a lot of troubles getting it to work on my Oneplus. This discussion has good instructions on how to get it working. I personally did not used it, as I tackled this problem before it was created, but most of the steps from this instruction I remember doing.
Just in case, have you tried enabling legacy mode in settings?
HPLazerJetPrinter1012 said:
I haven't tried installing it on OneUI devices, but had a lot of troubles getting it to work on my Oneplus. This discussion has good instructions on how to get it working. I personally did not used it, as I tackled this problem before it was created, but most of the steps from this instruction I remember doing.
Just in case, have you tried enabling legacy mode in settings?
Click to expand...
Click to collapse
The issue with Viper on OneUI 4 is the installation of the driver, no combination of Audio compatibility magisk modules worked, no matter what you do Viper is never able to install the driver, meaning that you can't even access any settings in Viper because the driver install prompt pops up every time you open the app.
That's strange. Is Viper magisk module just not getting installed? Only thing I can suggest is to try to install it using Zackptg5 installer.
HPLazerJetPrinter1012 said:
That's strange. Is Viper magisk module just not getting installed? Only thing I can suggest is to try to install it using Zackptg5 installer.
Click to expand...
Click to collapse
The magisk module installs but the driver doesn't. And the rootless installer can't really be used because there's no twrp available for the tab s8+. I tried an app which supposedly can flash the zip bit it didn't work
PowerAmp Equalizer can do the same without root
Catmobile said:
PowerAmp Equalizer can do the same without root
Click to expand...
Click to collapse
No it doesn't lol.
PowerAmp is just a basic eq with a compressor
I use Viper for DDC and Convoler mainly, equalizer secondarily