K20 bootloop after changing dpi in developer settings - Redmi K20 Pro / Xiaomi Mi 9T Pro Questions & Answe

I changed dpi in developer settings to 900 from 460 ,,
Now my device is bootlooping
I need all my data ,, so cant reset it
Please tell me some fix

kinghappy said:
I changed dpi in developer settings to 900 from 460 ,,
Now my device is bootlooping
I need all my data ,, so cant reset it
Please tell me some fix
Click to expand...
Click to collapse
Have you unlocked the bootloader?
Have you installed TWRP?
If you've not unlocked the bootloader, I don't think you can recover any data. You'll probably only be able to flash a MIUI ROM with the stock recovery, which will wipe everything.
If you can/have installed TWRP, then boot into that and recover your data. You should also be able to edit the config file for the dpi setting using the TWRP file manager. (I can't remember where this is, so hopefully someone else/Google can help with that.)

Related

[Q] Moto X 2014 5.0.2 update broke my phone

Hello everybody,
I'm new, I hope someone can help me here ... I'm quite sure somewhere on these forums there must already be answers for my problem but I'm too dumb to find them.
I have the European? 2014 Moto X (not sure how to get the exact model now?!)
Unlocked bootloader, rooted.
Everything was fine, except today I got the 5.0.2 (?) OTA update ...
I didn't want to do it, but it kept asking. The moment I pressed "don't ask again" the phone rebooted
and now it's stuck at the white bootup screen (Motorola logo)
I somehow managed to get into the fastboot? mode once, by somehow pressing buttons at startup ... but, well
My two questions are:
1. Can I still backup my data, photos, textfiles, etc etc
2. How do I go back to a working system. (maybe without loosing my data)
Please tell me if it's possible, and how ... or please push me into the right directions.
But as I'm half panicking detailed instructions would be so fantastic.
Personally, how I would recover data, is boot to fastboot and flash TWRP again (since you indicated you were unlocked boot loader). In TWRP, plug in the device to a computer via USB and your files will be there. Then you can reflash the stock firmware and be good to go. If you are comfortable flashing the firmware through fastboot, you can choose to not wipe data and you should be all set.
It may be worth trying just clearing the cache and seeing if you can boot.
Sent from my Moto X 2015 Pure Edition using Tapatalk
xKroniK13x said:
Personally, how I would recover data, is boot to fastboot and flash TWRP again (since you indicated you were unlocked boot loader). In TWRP, plug in the device to a computer via USB and your files will be there. Then you can reflash the stock firmware and be good to go. If you are comfortable flashing the firmware through fastboot, you can choose to not wipe data and you should be all set.
It may be worth trying just clearing the cache and seeing if you can boot.
Click to expand...
Click to collapse
Hey! Thanks a lot!
I did fastboot boot twrp, and managed to backup my data on the internat storage! Yeah! Thanks!! <3
Now to part 2, I tried to wipe the cache partition in TWRP, but it doesn't help; when I reboot it still only shows the white logo..
Should I wipe other partitions aswell? (davikcache?)
If there's a way without loosing the phone setup, it would be great.
(Installed apps ... open tabs in firefox etc ...)
I also have a "online nandroid" backup, I think from back then, right after I rooted.
Would I restore the system.img from there?
Will this remove installed apps?
Or should I restore all partitions made by online nandroid backup?!
(I thought this would be better than... or how would I find the right stock firmware online for my device?)
Sorry for being such a beginner!!!!
psssss said:
Hey! Thanks a lot!
I did fastboot boot twrp, and managed to backup my data on the internat storage! Yeah! Thanks!! <3
Now to part 2, I tried to wipe the cache partition in TWRP, but it doesn't help; when I reboot it still only shows the white logo..
Should I wipe other partitions aswell? (davikcache?)
If there's a way without loosing the phone setup, it would be great.
(Installed apps ... open tabs in firefox etc ...)
I also have a "online nandroid" backup, I think from back then, right after I rooted.
Would I restore the system.img from there?
Will this remove installed apps?
Or should I restore all partitions made by online nandroid backup?!
(I thought this would be better than... or how would I find the right stock firmware online for my device?)
Sorry for being such a beginner!!!!
Click to expand...
Click to collapse
Lollipop actually doesn't use dalvik, so that won't help. If you have a nandroid, you of course can restore to that but it would likely lose your apps/settings. You can try restoring just the system, it sort of depends on what went wrong. In my experience being stuck not booting, I generally just reflash everything. Not the most convenient but it is the most effective.
Sent from my Moto X 2015 Pure Edition using Tapatalk
xKroniK13x said:
Lollipop actually doesn't use dalvik, so that won't help. If you have a nandroid, you of course can restore to that but it would likely lose your apps/settings. You can try restoring just the system, it sort of depends on what went wrong. In my experience being stuck not booting, I generally just reflash everything. Not the most convenient but it is the most effective.
Click to expand...
Click to collapse
Hey xKroniK13x,
thanks a lot for caring!
Of course, catastrophy happened:
I did fastboot boot twrp and tried to restore system from there, didn't work so I restored system _and boot from my nandroid backup there
guess this was very stupid because
Now my phone boots right into the fastboot mode, and I can't fastboot boot TWRP anymore,
it says "incomplete boot image for booting"
partition sizes wrong, etc etc ...
what I did now was flashing TWRP, at least this worked and I can boot it from the phone now.
So, please, one more time help (for a very stupid user ):
1. I guess keeping my apps and settings is out of discussion now, haha
But is there a way, with unlocked bootloader, TWRP installed to go back to stock?
2. Now ... given my phone is not completely broken, I just thought about installing CM?!
Would this be recommended? is it working fine?
I'm just thinking about it, because with Cyanogenmod I won't have problems like this in the future, right?
(OTA updates destroying my phone because of root....)
Whoa, I'm sorry for posting this here, but ... :angel:
psssss said:
Hey xKroniK13x,
thanks a lot for caring!
Of course, catastrophy happened:
I did fastboot boot twrp and tried to restore system from there, didn't work so I restored system _and boot from my nandroid backup there
guess this was very stupid because
Now my phone boots right into the fastboot mode, and I can't fastboot boot TWRP anymore,
it says "incomplete boot image for booting"
partition sizes wrong, etc etc ...
what I did now was flashing TWRP, at least this worked and I can boot it from the phone now.
So, please, one more time help (for a very stupid user ):
1. I guess keeping my apps and settings is out of discussion now, haha
But is there a way, with unlocked bootloader, TWRP installed to go back to stock?
2. Now ... given my phone is not completely broken, I just thought about installing CM?!
Would this be recommended? is it working fine?
I'm just thinking about it, because with Cyanogenmod I won't have problems like this in the future, right?
(OTA updates destroying my phone because of root....)
Whoa, I'm sorry for posting this here, but ... :angel:
Click to expand...
Click to collapse
If you've been contemplating installing a ROM, now would be a good time to do so. Just remember to wipe the data on the phone even though it doesn't boot. And CM OTA shouldn't cause issues like this, it just flashes the zip file in your recovery. Doesn't care about root or anything of course. Otherwise, if you'd like to do stock, just use MDM to get the firmware and flash away. Hope this helped!
Sent from my Moto X 2015 Pure Edition using Tapatalk
Hi !
I have exactly the same problem.
Can you tell us how you did to fix the bootloop ?
Thank you
benjo22 said:
Hi !
I have exactly the same problem.
Can you tell us how you did to fix the bootloop ?
Thank you
Click to expand...
Click to collapse
Try clearing your cache in a recovery/fastboot, or reflash the firmware! No guarantee the cache will fix it, but sometimes it will.
Sent from my Moto X 2015 Pure Edition using Tapatalk
Thank you for your help.
Clearing the cache doesn't work, so I'm searching for others ways...
Can you tell me how to flash the firmware with adb ?
Thanks
Edit : I have an European version
benjo22 said:
Thank you for your help.
Clearing the cache doesn't work, so I'm searching for others ways...
Can you tell me how to flash the firmware with adb ?
Thanks
Edit : I have an European version
Click to expand...
Click to collapse
That is answered in the FAQ thread... It is a guide for Moto G but it is applicable for this device too. http://forum.xda-developers.com/showthread.php?t=2876769
Sent from my Moto X 2015 Pure Edition using Tapatalk
@xKroniK13x
Hey, thanks for somehow guiding me through this :victory:
MDM didn't work, so I just went for the CM 12.1 nightly.
I also had concerns because in my attempts to clear cache etc etc I had "wrong partition size" etc etc
But CM installed without problems!
(Just one more question- there can't be any problems in the future because of messed up partitions, right? Does CM fix this by installing? Or should I stop caring, if it works, it works, right?!)
In fact, CM runs great, fantastic on my phone.
I lost some app data, and most annoyingly my SMS, but ...
Other than that, I'm really happy with CM :laugh:
@benjo22
Hey, I tried to fix it by clearing cache partitions from a fastboot TWRP (I don't know how you call it, I just booted TWRP without installing it)
This didn't work, so I tried to restore a nandroid backup,
but this made it even worse. (partition errors, only fastboot mode, etc etc)
Just booting with TWRP without installing also didn't work anymore,
so I put TWRP on the phone, which luckily worked, downloaded CM 12.1, installed it via TWRP,
never did it before, but I was lucky, it seems like it worked great!
Even kept my "SD CARD" data, but lost apps and some data ...
So I didn't fix the bootloop, but I hope I made it better, futureproof...
Glad you got up and running. CM shouldn't cause any future issues as far as partitions and such.
Sent from my Moto X 2015 Pure Edition using Tapatalk

HELP with bricked device honor 4x che2-l12

i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?
If you can acces fastboot mode it's ok
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .
A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.
Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.

Zuk Z2Pro Android 7 Version

Hi All,
Was finally able to get a hold of the Android 7 version for Zuk Z2pro, at this point it's in the development phase, looks pretty stable as of now, it's just been an hour since I installed it, Got it from the Chinese site ( Landlord ) a little tough to figure out the content on the site, but the ROM is in English.
I tried flashing it with the Stock Recovery but didn't work , went back to 2.3.044 and then flashed the TWRP ( Chinese Version ) Did a dirty flash, and all the sensors {Heart Rate, UV Sensor, Pedometer, Proximity, etc } seem to be working fine. The file is available in a Baidu link, and it takes a lot of time to download.
The ROM now supports themes but as of now i see only 4 inbuilt themes and no black themes. But inbuilt themes uses nice icons to make it look simple and neat. I shall post pics of the screens. Settings now show the lab features directly to play around with fake location( never got it working though ). As of now calls and Volte working fine. Haven't been successful in making video calls over LTE with Zui Roms.
Need some help in getting a cloud storage to upload the file.
If someone could help me, would be happy to upload it for the benefit of the community. Again ***** Please do install it at your own risk, make sure you backup in TWRP before you flash this ROM , the size is 1.6 GB. ***** All thanks to the Chinese forums BBS.lenovomobiles.
Screenshots
These are the screenshots
And you can download the file from :
https://drive.google.com/file/d/0B6GiX9_gwfCqVXVhRHcyVEdfbkU/view?usp=sharing
Make sure you backup in TWRP, Please use the Chinese version of the TWRP to flash this file,
More screenshots please ??
Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk
Bugs
raber111 said:
Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.
anupsnair said:
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.
Click to expand...
Click to collapse
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk
I'm not able to flash it via chinese TWRP. I've also tried TWRP from Emmaus. If someone can share a working recovery with this ROM I'll tell you my opinion about it. (Error 7 is the problem).
raber111 said:
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
TWRP works fine, just that I wasn't able to root it, Gapps not required, as I installed the Google sync app and the Google contacts previously on the 2.3.044 build since I did a dirty update, got the play store and the Google contacts in tact
cyBeRdUdE-9 said:
More screenshots please ??
Click to expand...
Click to collapse
Hi Cyberdude,
Is there any specific screen that u are looking for?
anupsnair said:
Hi Cyberdude,
Is there any specific screen that u are looking for?
Click to expand...
Click to collapse
Screens of any major UI changes ??
Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.
Root Zuk Z2pro Android 7
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,
anupsnair said:
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,
Click to expand...
Click to collapse
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk
lucaam said:
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk
Click to expand...
Click to collapse
Thank you Lucaam, for the benefit of the forum can you please post a link, when I flashed SU, the sim in my phone stopped working.
Here's to you the link https://download.chainfire.eu/750/SuperSU/BETA-SuperSU-v2.64-20151220185127.zip?retrieve_file=1 of to the file that I've downloaded. I flashed it after the first full boot.
Sent from my Z2 Pro using Tapatalk
syedtahir16 said:
Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.
Click to expand...
Click to collapse
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram
ikram.senguen said:
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram
Click to expand...
Click to collapse
I"m not certain about other backups. But I had a CM13 TWRP backup.
What I did was:
QFIL to 1.9. This should work irrespective of what recovery you have. This is like an absolute reset. Once this is done, let your phone reboot and load once.
Then adb reboot bootloader
In the bootloader mode -> Flash the recovery ( You will need to flash Emmaus recovery if you are going back to CM13).
Once flashed. You can wipe the data,system and cache. Install CM13 and you should be all set.
You could also wipe and restore any old CM13 Backup too. Hope this helps.
SOLVED
SOLVED: HOW? STRANGE!
i did everything exact same as at home, but somehow ..just somehow ..it didnt ****ed itself and didnt stuck on everywhere and indeed succeeded flashing every f****** rom!
so here a step-by-step (if some ever expirience same) thanks to you all which i can confirm:
1. flash 1.9.104 rom through qfil (let it boot..)
2. enable usb debuging through enabled developer settings
3. boot in fastboot (adb reboot bootloader) unlock bootloader with your unlock_bootloader.img (fastboot -i 0x2b4c flash unlock unlock_bootloader.img) right after that unlock it (fastboot -i 0x2b4c oem unlock-go) forreal
4. reboot, then enable usb debuging again and boot in fastboot again (adb reboot bootloader)
5. flash emmaus TWRP (fastboot flash recovery recovery.img) DO !NOT! USE ---> [fastboot -i 0x2b4c boot recovery.img] <--- CODE!
6. boot to TWRP, wipe data/cache/dalvik-cache (system not needed, better dont wipe system to be sure)
7. flash AICP, RR or CM13 .zip, NOT ANY OTHER (https://emmaus.pro/?dir=Zuk Z2 Pro & http://forum.xda-developers.com/zuk-z2-pro/development/rom-aicp-11-0-mm-6-0-1-unofficials-t3499283) those work for sure on emmaus TWRP
8. reboot, DONE
to every single zuk z2 pro user out there, please make sure your PC, USB PORT, USB-CABLE is working right, because even if everything seems right, under the hook its sometimes not. In my case, i knew it, but could not believe it since qfil showed me SUCCSESS in every section, the connection betweet cable and usb port was faulty, thats the only possibility. THANK YOU ALL VERY MUCH, this was one of the most HARD-BRIKS ive ever experienced, and ive been through S2, S3, S4, S5, S6, HTC ONE M7 hard-bricks.. so.. yeah!!! THANK YOU VERY MUCH :')
i try this zip on my twrp , but my phone are dead don't run anybody else
what i can do ?
Many thanks to you ! the flash worked very well. i had same issues here . best description ever many many thanks !!

Moto E4 plus softbricked.

Hi guys ! I rooted my device moto e4 plus MTK XT1772 yesterday. It was working great and I decided to install substractum theme engine , I downloaded a theme and applied , substractum sent me a message that I need to reboot the system to make some changes. I did it and now my device got stuck in the motorola's main logo , nothing happens , the system is not loading , I dont know what to do . I used Twrp to clear cache and data folders and nothing happens . I decided to delete the substractum folder and it is the same .
Unlocked bootloader is ok and TWRP correctly installed but What do I need to do or install to make it work ?, Do I need to install an image of XT1772?(which I don't have). Anyone here knows how to solve this issue?
Thanks in advance.
Updated.
I solved the problem. Thanks anyway. My device is working.
Danny Mx said:
Hi guys ! I rooted my device moto e4 plus MTK XT1772 yesterday. It was working great and I decided to install substractum theme engine , I downloaded a theme and applied , substractum sent me a message that I need to reboot the system to make some changes. I did it and now my device got stuck in the motorola's main logo , nothing happens , the system is not loading , I dont know what to do . I used Twrp to clear cache and data folders and nothing happens . I decided to delete the substractum folder and it is the same .
Unlocked bootloader is ok and TWRP correctly installed but What do I need to do or install to make it work ?, Do I need to install an image of XT1772?(which I don't have). Anyone here knows how to solve this issue?
Thanks in advance.
Updated.
I solved the problem. Thanks anyway. My device is working.
Click to expand...
Click to collapse
How to solve yours problem. Tell the exact details.
Spk1690 said:
How to solve yours problem. Tell the exact details.
Click to expand...
Click to collapse
I used TWRP to check into the folder where the substractum was installed and erased it then I looked for the theme.apk which was giving me problems (harmony.apk in this case) I deleted it and rebooted the system, I entered in twrp and cleaned data and cache and then I rebooted. That´s all.
1- Recovery mode to enter in TWRP
2-Mount
3- Select "System" because "Data" and "Cache" are selected by default
4- Return to main menu.
5-Advanced - File Manager
6 -System - app
or
6-System-priv-app
look for the folder which is giving you problems so you need to remember the name of the app that you installed or the one you think got you in trouble, delete them and then return to the main menu and reboot the system . I hope this help you. (sorry for bad english I´m not good at it .)

Question maybe the twrp was erassed because of "factory reset"?

i had problem with my password , so i made a factory reset with my twrp .
right now i dont see the twrp file in my phone , and also , when im pushing together the volume down+power on/off im not entering to the twrp as usuall .
maybe while doing the factory reset ive errassed the twrp? how can i know that before flashing the twrp again?
another question - why while pushing together the volume down+power on/off im not entering to the fastboot , altough i see the fastboot?
thnx
i think when you have so much problems with you Phone its better you make a FORMAT DATA and install the ROM that you have on your Phone NEW .
Remember YOU will lose all your settings and all things that you have installed, so SAVE everything beforehand.
im afraid that the bootloader is loacked again , maybe because of the "factory reset" . how do i cheack this?
ok , i connected my device to the mi unlock tool and its written unlocked , but i dont see it on the developer options - "mi unlock status" . what the ... its going on ? why i cant enter my bootloader? why can i see if my device is locked or not?
thanks godddddddddd i managed to enter the twrp and i saw the sign of an open key lock on the screen , which mean the phone is unlocked . but still i cant see the twrp file on my phone , why ?
please help me , i dont know what to do -
i entered the twrp to sdcard and i dont see anything , even not the eu rom zip file . i dont know what happened . in my computer i can see the eu rom zip file but not the twrp file , also , i cant see the eu rom zip file with the twrp . please help me i dont know how to get out of it
ok guys , ill tell my story that maybe you can help me :
i have twrp + eu rom stable on my mi 11 pro
1. few days ago i forgot my password , so i entered with the twrp and made wipe data+factory reset .
2. after that the eu rom remains with my language and nothing been changed
3. today i decided that i want to flash the eu rom from the begining , so i copy the rom to my internal storage , but i couldnt see the twrp file
4. after i didnt see the twrp file , i discovered that the developer options where closed , so i opened them again , but i didnt see if my device is still locked , and there is a special raw in the developer options that tell you if the device is locked .
5. after that i saw on the screen the keylock sign in open position and also i connected the phone with the "mi unlock tool " and i saw that my device is unlocked along with the serial of the phone .
6. i entered the twrp and i didnt find the eu rom zip file in the sdcard section (the file is empty) . i searched everywhere in the twrp and i couldnt see it .
7. right now the situation is that i can see the zip file on my computer , but not the twrp file , , and when im in the twrp i cant see the eu rom zip file .
8. thats the whole story , now , how can i see the file on the twrp ? how can i flash the rom ? maybe i should errase everything and begin from the beginning ?
thnx for your attention
maybe is the Zip in Install / Data / Media
Chicko24 said:
maybe is the Zip in Install / Data / Media
Click to expand...
Click to collapse
i cheacked there and its not there
how can i return to the original chinese rom including the original fastboot , that ive got in my device when i bought him?
Flash original china ROM , it comes with it's own recovery so you don't/won't need twrp
speedtripler said:
Flash original china ROM , it comes with it's own recovery so you don't/won't need twrp
Click to expand...
Click to collapse
if im flashing china original rom with is fastboot recovery , is it mean that im getting to the starting point where i got the device when i bought it with the factory settings?
1. can i flash original china rom on eu rom without causing "brick" ?
2. where i can find original china rom for my mi 11 pro and how can i flash it without using the twrp?
mmns said:
if im flashing china original rom with is fastboot recovery , is it mean that im getting to the starting point where i got the device when i bought it with the factory settings?
1. can i flash original china rom on eu rom without causing "brick" ?
2. where i can find original china rom for my mi 11 pro and how can i flash it without using the twrp?
Click to expand...
Click to collapse
Original ROM won't brick it
mmns said:
if im flashing china original rom with is fastboot recovery , is it mean that im getting to the starting point where i got the device when i bought it with the factory settings?
1. can i flash original china rom on eu rom without causing "brick" ?
2. where i can find original china rom for my mi 11 pro and how can i flash it without using the twrp?
Click to expand...
Click to collapse
Mifirm.net and just look up the phone for all available ROMs. Find the fastboot version, flash and you are back to stock.
mmns said:
ok guys , ill tell my story that maybe you can help me :
i have twrp + eu rom stable on my mi 11 pro
1. few days ago i forgot my password , so i entered with the twrp and made wipe data+factory reset .
2. after that the eu rom remains with my language and nothing been changed
3. today i decided that i want to flash the eu rom from the begining , so i copy the rom to my internal storage , but i couldnt see the twrp file
4. after i didnt see the twrp file , i discovered that the developer options where closed , so i opened them again , but i didnt see if my device is still locked , and there is a special raw in the developer options that tell you if the device is locked .
5. after that i saw on the screen the keylock sign in open position and also i connected the phone with the "mi unlock tool " and i saw that my device is unlocked along with the serial of the phone .
6. i entered the twrp and i didnt find the eu rom zip file in the sdcard section (the file is empty) . i searched everywhere in the twrp and i couldnt see it .
7. right now the situation is that i can see the zip file on my computer , but not the twrp file , , and when im in the twrp i cant see the eu rom zip file .
8. thats the whole story , now , how can i see the file on the twrp ? how can i flash the rom ? maybe i should errase everything and begin from the beginning ?
thnx for your attention
Click to expand...
Click to collapse
just format data in twrp, everything will be back
hungragezone said:
just format data in twrp, everything will be back
Click to expand...
Click to collapse
That would leave him still on the eu ROM when he wants to go back to the China ROM
speedtripler said:
That would leave him still on the eu ROM when he wants to go back to the China ROM
Click to expand...
Click to collapse
Nope, i found that format data won't delete anything. I dont know how to explain, but i met alot of strange problem with 11 ultra twrp, such as after flash eu rom, my phone didn't boot to system, always boot to twrp, and at that time, twrp cant find any file on phone storage. At last, i found that after flash rom, i only need to format data, and then everythings started to work. Rom boot normally, twrp can see all file in phone storage
hungragezone said:
Nope, i found that format data won't delete anything. I dont know how to explain, but i met alot of strange problem with 11 ultra twrp, such as after flash eu rom, my phone didn't boot to system, always boot to twrp, and at that time, twrp cant find any file on phone storage. At last, i found that after flash rom, i only need to format data, and then everythings started to work. Rom boot normally, twrp can see all file in phone storage
Click to expand...
Click to collapse
I never had that issue
Hello,
i always use an USB-Stick for the ROM - so there is no access to phone storage needed.
Please try it.

Categories

Resources