when the phone reaches 5% ( red Magic screen recorder triggers the same effect) of battery and you are playing games like PUBG its very hard to swipe on the touchscreen ( screen feels heavy, bouncing, feels like you are holding opposite magnets at each other when you move your screen. It is not possible to play in this condition.. first 2 weeks when I bought the device swiping on the touchscreen was perfect. Really smooth! But after 2 weeks it is terrible Only when I turn the phone off for a few days swiping on the screen is smoother but for a few hours-days only.
I had exactly same problem with my old Samsung s8 after few months of use swipe on touchscreen was as bad as my current device Nubia red magic 3.
Did Factory reset 2 times no effect.
Sending for warranty repair may be useless because many of users have reported that they are keeping your device for months and then denying warranty claim if notice any scratches + you have to pay the shipping cost!!!!!!!!!
Which part of the phone could cause this? I saw few post about the same issue with rm3 and other brands but no solve was there . Any info would be appreciated
Why would u let it reach 5%. That's not good for battery
Related
It have happened to me 3 times already, and I've only had my Diamond for 3 weeks...
When I leave my device charging over night, in the morning the display looks completely scrambled / distorted and the only thing I can do is a restart... Luckily it boots up normal again.
Am I the only one with this issue??
Btw... I've handled my phone with care & not ever dropped it or had it near any moisture, I guess this might be a harware issue!?
Dun worry owziee....
I having the same problem too.........
nothing but a white static/scrambled screen, right? Happens many time to me...the only thing i can do is re-insert the battery (holding the power button to restart doesnt work).
what about soft reset button ?
Sof reset fixes it. I think that the 3D chip is overheated, because it happens when I play sensory overload (a 3d game) too.
But strangely not when I play Call of Duty 2...?
Alteast we could get it back to normal with a soft-reset, kaiser had similar problem where only a hard-reset was possible after the same situations i guess..
Regards,
Carty..
i had a similar situation after i used my device to send a text, turned the screen off then turned it back on immediately, i had some strange screen with all different coloured pixels and it looked broke as hell, but i merely just pressed the power button on and off and it was fixed again :S
Yes i have the same problem and have no idea what is causing it. The most frustrating thing is when it happens my alarm does not go of... I would realy like a fix for this.
phew! It has happened once with me, and frankly it scared me a bit. Removed the battery and then it was Ok again. Weird behaviour. I don't think it has anything to do with heat tho.
I had the same issue too and I had to perform a soft reset fer it to work but after a week the touch screen of mine stopped workin no idea why i had to give to the service center fer repairs they told me it wud take a week to repair it rite now I am without a diamond
Something like the screen shots below?
I've had this problem for quite a while. If you disable Touchflo3d, you will not have this problem at all. This issue only concerns the 3d gpu.
I've since updated to v1.93 Olinex SPL and its more stable now, thou I still get it once a while, especially after a long period of not touching the phone (e.g. when sleeping).
Hi i got samsung galaxy s 1 month back ,today when i am browsing widgets from main screen Display suddenly started to show fading colors with multiple horizontal black line and phone is hanged,i waited for few seconds hoping it will return to normal but continuously all colors lost slowly with white screen and multiple black lines.then i removed battery and restarted after which display is fine with no problem.
so anyone experienced similar problem and what should i do if it happen again?
Thank you!
Hey mate,
I had the same problem with an I9000 international a while back, it was a hardware fault and the phone was replaced by my carrier. (at least that is what they told me)
Sorry for the bad news,
Alex
Now,My phone is workinkg fine!
By the way how many times you had this problem? After this problem ur phone is dead or worked after restart?
Today when i pressed side key to turn on display there are three white lines on display when i drawed pattern to unlock phone lines disappeared!
this is hardware problem? should i go to customer care?
Hi again,
My phone did it intermittently when i was using it, not just on certain screens, it was almost random. Sometimes it would work perfect for 2 days then just have the same problem you described.
My RMA sheet from Samsung said:
Tested Main PCB
Tested Display
Handset Hardware fault
Replaced Handset
Passed live air tests
Passed stress test
So based on the above, my phone was ratsh*t
So, My diamond woke up me this morning, as usual. but problem...
my Diamond's screen didn't respond. and seems like under screen there is like vaccum. whole digitizer is pushed down, haven't had this kind of problem before. How can I get rid of that?
Last night things worked great.....
You can`t get rid of this problem. It`s a HTC known issue.
A friend who ownes a Touch Pro has the same problem. If he puts his headset to recharge during the night face down , it will cause the interior of the touchscreen to vacuum wich renders his phone operable , but without touchscreen capabilites ( for a short while ).
I replied thinking you left your phone face down during the night. If not , then my solutions is invalid.
well i left my phone charging whitout pouch onto glass table, so that screen was down.. yes the problem disappeared but about 2-3 weeks my phones screen was dead because here(in estonia) january s temperatures are as low as -30C and screen needed heat to come out of vaccum. it happens occasionally(never happened before). to conclude it I bought new screen and changed screen myself
Hello
One night I was using the phone without doing anything special , some video watching . Phone went dark, tried to reboot. Blank Screen and the capacitive buttons flash. Left it to charge all night, in the morning it started but after I pressed the lock button blank screen but phone still working and receiving input.
Took the battery and SD card out left it for 30 seconds then started it again, Stuck at LG logo. Repeat , phone started ... Pressed lock button once then again to unlock , screen wouldn't start.
Used LG Mobile Update recovery tool to restore it ... Didn't solve problem. Sometimes it does not even start , just flashes buttons, other times it does without screen and last all works even the screen until first time goes dark , in the last two cases I can use LG On-Screen Phone without trouble, in doing so I installed a proximity sensor test app to see if it was causing my screen to not come back on , the sensor looked fine.
Facts:
1. Two day old Optimus Black p970, worked like a charm until stated problem
2. The app that checked proximity sensor showed the sensor to be free when my hand wasn't on it
3. The warranty laws in my country are idiotic so I would do or buy anything rather than send it so they can give me a new one in 3 months.
4. Tried another battery from another Optimus, fully charged nothing different.
5. Stock rom.
Do any of you fine people have some ideas on how to fix this? Thanks in advance
Hi there...
Sometime ago [1 year and a half or so~] I worked at a cell refurbishing facility [there were samsung, motorola and palm devices from sprint] and that problem you have was quite usual. Blank screen, still the phone is somehow usable like reciving calls...
There's this thing called "flex" which is the connector between board and display and that is what we fix, most of the time not even "fix it" just getting it in the right place...
This happen because of excesive use in those sliding or clamshell devices, in OB could be for overheating, you could try to fix it yourself or pay $20 usd [that's what it cost here]
Would that connector explain the fact that sometimes it doesn't start at all? hmm I am thinking now and I guess if it moves and somehow the phone feels it has not display connected it could fail to start... Anyhow thank you
actually yes, it could be only for the flex [some devices don't start at all when not having display or keyboard if there's any] but since our OB is not sliding nor clamshell type probably was overheating.
you say you have stock rom, well now I'm using CM7 but when I was at stock and after using the phone a few minutes it felt warm and some more minutes [like playing gunbros where you need to use both hands and a lot of movement] it was really hot and had to stop playing for a while.
what I'm trying to say is that because of overheating flex could have moved, but because of overheating too may have move something else, you couldn't belive the huge number of micro-things that reside in the board.
so if it's only the flex, it's an easy task to do, just unplug and plug again, but if it's something else it's quite hard to know just looking at it, you need to do some electric measures and stuff, the recomendation is to take it to a tech center or something
Hi. I Have same issue. Two times when i press power buton, butons flashing and screen still black. Phone not responding. I must remove baterry.
Sent from my LG-P970 using Tapatalk
Hi there, got the same problem too with my optimus black. Screen goes flickering, shut down don't do any good, and the phone temperature is kinda hot. But in my case it work after I clean some cache and data in the phone storage through LG OSP. After that, the phone temperature back to normal and the phone screen back to normal also. I believe that in my case the phone is overheated.
Hey there
I have an Asus rog phone 2 from last 3 months and it was working quite good but today I was using my Gmail and after 5 to 10 mins of use I locked my phone and put it on the table and when I opened it again after 5-6 mins its screen was showing black each and everything is working but the screen is black and I am not able to see anything whats going inside the phone. as it sometimes shows little bit screen at the bottom of the screen but sometimes its shows full black I don't know what's the problem as the phone screen is perfectly ok without any damages or scratches each and everything thing looks good but why this is happening ? does my phone will be cover under warranty by Asus as I don't think its any kind of physical damage so please let me know about the same
do you have double tap to wake on? I have found that helps.