hello
i had the KFFOWI with FireOS 5.3.6.4 on it.. after tryin to downgrade via rootjunks downgrade tool it wont turn on anymore?! what can i do... if i plug the device in to the computer i hear the sound of a usb connection turnin on and after a few seconds the sound cames again an it disconncts.... pleeze i hope this is solveable...
Related
Hi guys having a major snag, was trying to revert to stock unrooted using pc companion but usb came out at the start and now i cant get past the sony logo on booting up, it just turns off, now pc companion wont pick it up, anyone have any ideas please?
flash with flashtool
swifteh said:
Hi guys having a major snag, was trying to revert to stock unrooted using pc companion but usb came out at the start and now i cant get past the sony logo on booting up, it just turns off, now pc companion wont pick it up, anyone have any ideas please?
Click to expand...
Click to collapse
Follow the instructions within PC Companion. Because it shouldn't even come up with the Sony logo if you do it properly.
You will have to go through the repair my phone option now.
unplug phone from USB when advised, the key part is next, while continuing to hold the volume down key plug in the usb cable to the phone, your computer should now say installing drivers for ...flash device or similar, then the install/upgrade should continue through.
hey thanks for the reply mate, i got it sorted with SUS, pc companion was not even picking up the phone, flashtool wasnt either.
*problem solved*
I had downgraded my phone from the latest update to .638 to root my phone and i lost my imei number, so my phone no longer read my SIM. So i rooted my phone using Vroot and downloaded .108 Firmware to Update back to a newer version . But now my phone no longer goes to flash mode. whenever i try connecting my phone with the usb and volume down button , the phone starts charging . the phone boots up and shows the amout of charge left. i did try with full charge :|
Please Help :/
It did work properly before, and usb debugging is on and unknown sources too. and the device is connected in MSC and SD is removed ^_^ and all proper drivers are installed too
Thanking you in advance
DarkDivith said:
I had downgraded my phone from the latest update to .638 to root my phone and i lost my imei number, so my phone no longer read my SIM. So i rooted my phone using Vroot and downloaded .108 Firmware to Update back to a newer version . But now my phone no longer goes to flash mode. whenever i try connecting my phone with the usb and volume down button , the phone starts charging . the phone boots up and shows the amout of charge left. i did try with full charge :|
Please Help :/
It did work properly before, and usb debugging is on and unknown sources too. and the device is connected in MSC and SD is removed ^_^ and all proper drivers are installed too
Thanking you in advance
Click to expand...
Click to collapse
had this problem a few day ago too. For me this works: with a disconnected device, choose the ftf ypu wanna flash. then wait until flashtool says "waiting for flashmode. then make shure your phone is turned off and then when it is switched pff, wait 10 seconds. then connect the cable to the phone. NOW press volume down and connect the other end of the cable to the pc.
now it will work i think
Thank you for replying, but sorry that dint work for me :/ can someone please help me out? if it doesnt read my SIM, i wont be able to attend any calls pleaaaase
somone please help me.. i wanna get my phone back to working before my family finds out.. will giving my phone to sony work? pleasse...
hello???
Hello guys I think I have bricked my device. I had successfully installed CM 12.1 but couldn't install google play store. It was firmware 5.1.1. So I decided to install os original firmware v5.1.1 using Rootjunky videos. How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet. I successfully loaded the firmware ( Install from the ADB complete )but in the end I screwed up. I didn't remove the cable before pressing reboot system now(in recovery mode). Now tablet won't boot up. Now connected to pc some software installs and I hear disconnecting/reconnecting tone, few seconds interval. In device manager ,other devices it shows MT65xx Preloader with yellow icon. Please help if there is any hope. Many Thanks.
krrishtm said:
Hello guys I think I have bricked my device. I had successfully installed CM 12.1 but couldn't install google play store. It was firmware 5.1.1. So I decided to install os original firmware v5.1.1 using Rootjunky videos. How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet. I successfully loaded the firmware ( Install from the ADB complete )but in the end I screwed up. I didn't remove the cable before pressing reboot system now(in recovery mode). Now tablet won't boot up. Now connected to pc some software installs and I hear disconnecting/reconnecting tone, few seconds interval. In device manager ,other devices it shows MT65xx Preloader with yellow icon. Please help if there is any hope. Many Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/amazon-fire/general/unbrick-amazon-fire-7in-2015-5th-gen-t3285294
Sent from my KFFOWI using XDA Labs
sd_shadow said:
http://forum.xda-developers.com/amazon-fire/general/unbrick-amazon-fire-7in-2015-5th-gen-t3285294
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
I can't even boot it up. I tried pressing low volume + power button / all kinda combinations. When connect to pc it keeps disconnecting and reconnecting in 3-4 sec gap. There is no fire/device in device manager. Installed all softwares . Before bricked device everything worked fine. I can't reach to recovery option. All these solution works after that process.
At 7:35 on this video of Rootjunky - { How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet} I was supposed to plug out the cable and press reboot button. I didn't remove the cable just pressed the button and from there device don't start. I don't see any logo ,the screen is just switched off. The only movement I see when I plug it to the pc. The reconnect/Disconnect tone from pc I think it's in Loop. I hope you guys understand now how exactly I bricked it. Previously I installed the CM 12.1 successfully and it was smooth and fast.
Before this solution, on other devices I had MT65XX PRELOADER option with yellow icon. It stays for a few sec then disappears and this process repeat itself.. After updated drivers ( disabling driver signature on windows 10) now there is no fire device in device manager but connect /disconnect tone is there.
Quote:
Originally Posted by bhargav1991
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL
I don't know how to flash firmware through sp-flash tool. . I will give my best ,every solution you tell me. I got this tablet as a gift and I gave it to my younger brother. He gave me to install some games except I installed custom roms / tons of softwares but games on it and finally bricked it. Thanks guys for help.
any updates?
Help please, same issue, same mistake! Device will be "connected" (windows sound) and disconnected, and continue, it won't stay connected, (battery disconected, tried holding volume key too) therefore I cannot use flash tool
1
JhinDemon said:
Help please, same issue, same mistake! Device will be "connected" (windows sound) and disconnected, and continue, it won't stay connected, (battery disconected, tried holding volume key too) therefore I cannot use flash tool
1
Click to expand...
Click to collapse
If stock recovery is not accessible via <power>+<vol-up> the device can not be recovered.
Any solution?
Hi, do you have any solution?
I have exactly the same problem.
Thank you if you can help me with this information.
krrishtm said:
I can't even boot it up. I tried pressing low volume + power button / all kinda combinations. When connect to pc it keeps disconnecting and reconnecting in 3-4 sec gap. There is no fire/device in device manager. Installed all softwares . Before bricked device everything worked fine. I can't reach to recovery option. All these solution works after that process.
At 7:35 on this video of Rootjunky - { How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet} I was supposed to plug out the cable and press reboot button. I didn't remove the cable just pressed the button and from there device don't start. I don't see any logo ,the screen is just switched off. The only movement I see when I plug it to the pc. The reconnect/Disconnect tone from pc I think it's in Loop. I hope you guys understand now how exactly I bricked it. Previously I installed the CM 12.1 successfully and it was smooth and fast.
Before this solution, on other devices I had MT65XX PRELOADER option with yellow icon. It stays for a few sec then disappears and this process repeat itself.. After updated drivers ( disabling driver signature on windows 10) now there is no fire device in device manager but connect /disconnect tone is there.
Quote:
Originally Posted by bhargav1991
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL
I don't know how to flash firmware through sp-flash tool. . I will give my best ,every solution you tell me. I got this tablet as a gift and I gave it to my younger brother. He gave me to install some games except I installed custom roms / tons of softwares but games on it and finally bricked it. Thanks guys for help.
Click to expand...
Click to collapse
instrutor said:
Hi, do you have any solution?
I have exactly the same problem.
Thank you if you can help me with this information.
Click to expand...
Click to collapse
Device is unrecoverable if it can not boot into stock recovery mode by pressing two outside buttons from a cold start.
Same issue here. Any work around
Unfortunately I seem to have made the same mistake... Isn't it possible to buy a "Factory Fastboot Cable" and get it back to life that way?
Same problem here... instead of wiping cache and rebooting I pressed "Shut down" and it wont turn on again... it doesn't even activate screen. Nothing at all. How can it be recovered? There must be a solution out there!
Hi Guys
like above on tittle
after downgrade os from 5.1.4 to 5.1.2 with ADB, i brick my Tab
now i can not start my fire, it total dead
when connect to Pc, i hear sound like USB connect and then disconnect over and over again.
sb has the trouble like me?
sthv83 said:
Hi Guys
like above on tittle
after downgrade os from 5.1.4 to 5.1.2 with ADB, i brick my Tab
now i can not start my fire, it total dead
when connect to Pc, i hear sound like USB connect and then disconnect over and over again.
sb has the trouble like me?
Click to expand...
Click to collapse
Post filename for 5.1.2 firmware you tried. Or md5.
Sorry i´m busy in this day
here is that Version that i use
update-kindle-global-37.5.4.2_user_542168620
thanks
@sthv83
strange
filename complies 5.1.2
it didn't have to brick your tablet
can you boot into recovery?
long press Vol- & Power simultaneously
i ve tried it so many time but did not work !
nothing happen, display will not boot
If it covered 90 day warranty try to replace with Amazon
sthv83 said:
Hi Guys
like above on tittle
after downgrade os from 5.1.4 to 5.1.2 with ADB, i brick my Tab
now i can not start my fire, it total dead
when connect to Pc, i hear sound like USB connect and then disconnect over and over again.
sb has the trouble like me?
Click to expand...
Click to collapse
Just to confirm this was via the stock recovery menu (sideload FireOS) and not some other means. If accurate the 5.1.2 image may have been corrupt which isn't uncommon on larger downloads. Always check the checksum (md5) to verify file integrity.
@Davey126
Amazon stock recovery doing it itself before applying (as i remember)
Hi everyone,
I got an P20 PRO Build: CLT-L29 9.0.0.159(C33E3R1P9) that as the following issues:
-FRP Locked
-Can't get into FASTBOOT mode (i press VOLUME DOWN, and i plug into computer and it just starts charging.
- I tried to Upgrade /Downgrade the firmware using OTG cable by dialing *#*#2846579#*#*
no sucess, i tried other fw packages to make sure...
-The i tried to use the Firmware Finder method, changing the router DCHP DNS, without any sucess aswell...
I don't know what to do, i really need some help :/
Have you try to downgrade in HiSuite?
masze said:
Have you try to downgrade in HiSuite?
Click to expand...
Click to collapse
Hey mate, well I think that I would need to get the phone into FASTBOOT mode, correct?
Somehow I can’t get the phone into that mode, I tried everything.
No, just connect your phone with hisuite on pc.
Possible can you downgrade there.
I can downgrade from 9 to 8 in hisuite