Related
I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
maskr said:
I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
Click to expand...
Click to collapse
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
ttf said:
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
Click to expand...
Click to collapse
Yes I used another cable, but no success
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
can3gxw said:
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
Click to expand...
Click to collapse
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Try cleaning port on phone
Hi, I went through similar - only ubuntu didn't work either.... I eventually read in a linux forum though about cleaning the usb port on the phone with alcohol. As was at home then and tried on windows again and BOOM! drivers like crazy...
Might try that too. My phone was only 3 months old and never really abused but it worked so what do I know.
Ubuntu or alcohol, I'm happy now that my issue was solved
Ubuntu or Alcohol
maskr said:
Ubuntu or alcohol, I'm happy now that my issue was solved
Click to expand...
Click to collapse
Or both in moderation if its going really bad.
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
thommy86 said:
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
Click to expand...
Click to collapse
You don't have to know much about ubuntu, just download it, then install it as any windows program, boot into ubuntu.
After that connect your phone to the computer, and make sure to activate debuging mode on i9000. You may need to disconnect and reconnect the cable before it works.
I also find that my PC will only recognize my phone if I reboot the i9000 right before connecting it.
Quirky, but livable.
Actually this issue is strange, and when I emailed Samsung about this problem, they asked me to install KIES
Yes My phone to only charging when connect cable nothing else happen please any help
Try This for your rooted phone
http://db.tt/xUlV2qo
it works on froyo only ...
Try it works for me
Step :
1. Download that file
2. Move that file to your /sdcard
3. Flash that zip on Cwm recovery
Sir my phone is not rooted and how to root without usb its not working
iamnajam said:
Sir my phone is not rooted and how to root without usb its not working
Click to expand...
Click to collapse
Try to root first ...maybe with .apk like z4root or other.. i have no clue ...
if you succes root your phone and then instal CWM with rom manager..
Then Flash that file
z4root is not working and oneclickroot need usb connection i cant root my phone by zroot plz tell any other way
maskr said:
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Click to expand...
Click to collapse
Try that, it worked for me
i have the same problem and found out that my phone has to be on idle mode... how do i put my phone in idle mode? it says to close all applications and i did but still nothing... and none of the above solutions worked for me.
my phone info is this:
Firmware version: 2.1-update1
Baseband version: I9000TUBJH1
Kernel version: 2.6.29 / [email protected] #2
Build number: ECLAIR.UBJI1
And to top it all my phone will not boot into download mode.
Guys,
I am having the same issue. This started when I upgraded my P from Win XP to Win 7. I tried the alcohol thing. I tried Ubuntu which could not recognize the phone, whatever mode (USB debug or not, media, kies or mass storage). Of course, I had tried before that to install the lastest USB drivers. I also tried Kies.
Nothing worked. Any further help ?
THanks
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.
Hey there,
After upgrading windows 8 to 8.1, I cannot get my phone into fastboot. It seems that previously installed drivers on W8 are now gone.
Any idea how to fix this?
jimilegolas said:
Hey there,
After upgrading windows 8 to 8.1, I cannot get my phone into fastboot. It seems that previously installed drivers on W8 are now gone.
Any idea how to fix this?
Click to expand...
Click to collapse
Install the drivers again.
I've had the same problem in windows 8.1... Fastboot device cannot be recognized by the system, but i don't know why; the problem was "Error enumerating device id". If you see hardware id, it doesn't exists and the driver won't be found. I returned to windows 7.
gregbradley said:
Install the drivers again.
Click to expand...
Click to collapse
Mind if you shared a way of doing that?
Installing the official sony flashtool with its drivers didn't help + every other way I tried (that worked when I had 8) also resulted in failure.
PS:When I connect it in fastboot, windows says that "drivers malfunctioned, unknown USB device"
jimilegolas said:
Mind if you shared a way of doing that?
Installing the official sony flashtool with its drivers didn't help + every other way I tried (that worked when I had 8) also resulted in failure.
PS:When I connect it in fastboot, windows says that "drivers malfunctioned, unknown USB device"
Click to expand...
Click to collapse
Have you tried the drivers from flashtool (Not the sony one, the one by androxyde here on xda)
gregbradley said:
Have you tried the drivers from flashtool (Not the sony one, the one by androxyde here on xda)
Click to expand...
Click to collapse
Yes, but I cannot install them.
Sent from my Xperia T using xda app-developers app
jimilegolas said:
Yes, but I cannot install them.
Sent from my Xperia T using xda app-developers app
Click to expand...
Click to collapse
You have to do it safe mode or something similar
read this from flashtool.net
http://www.flashtool.net/disabledrivers.php
gregbradley said:
You have to do it safe mode or something similar
read this from flashtool.net
http://www.flashtool.net/disabledrivers.php
Click to expand...
Click to collapse
I've done that, but I still get the same windows usb error :/
jimilegolas said:
I've done that, but I still get the same windows usb error :/
Click to expand...
Click to collapse
OK, not sure what the issue is then, can you get access to a win7 machine? There are no issues with drivers on win7
gregbradley said:
OK, not sure what the issue is then, can you get access to a win7 machine? There are no issues with drivers on win7
Click to expand...
Click to collapse
Guess this is the only option now.
Anyway, thanks.
jimilegolas said:
Guess this is the only option now.
Anyway, thanks.
Click to expand...
Click to collapse
Same problem here. See my post: http://forum.xda-developers.com/showpost.php?p=46645468&postcount=129
No solution found... Yet
fastboot for windows 8.1 over linux and this is my option to work fastboot on win 8.1
pietrucci said:
Hi,
Seems my usb drivers don't work anymore in Windows 8.1. Tried every version of usb-drivers, removed existing drivers, disabled digital signing again but no succes.
Anyone with a solution already?
Click to expand...
Click to collapse
load wubi (windows ubuntu installer) over the link http://wiki.ubuntuusers.de/Wubi
than install ubuntu, on harddrive C:// and reboot your Pc
Now you have a linux in your current system, you can remove ubuntu (linux) in Programms & feautures list in windows.
now reboot reboot the system and isntall in ubuntu fastboot.
you musst give in the terminal sudo apt-get fastboot
and now you can flash your bootloader in linux.
but you musst sudo bevor you type fastboot flash type sudo fastboot flash boot boot.img
you say it is easy
gooogle wubi (windows ubuntu installer)
im here.. me too facing the same weird problem.
in 8.1 os it worked at first but then it didnt recognizing my device. reinstalled the 8.1 os and tested and same result. worked at first then fu**ed up again.
hope someone will get ride of this prob in 8.1ois :/
Same..
Exactly the same problem here. On windows 8, no issue. After updating to 8.1, "Error enumerating device id". I've tried everything, but nothing.
I had my xperia without kernel, and I REALLY needed Fastboot, so I had to go to a W7 pc, and no issue then.
Ohh, and I can't disable driver verification on W8.1 . When i'm in advanced boot menu, I just can't press any key. The keyboard doesn't work, and I have to Hard Reboot. Any idea?
EDITED
This worked for me : http://www.droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/
So now I can use fastboot/ flashmode, but only if I connect the phone to an usb 3.0 port. On 2.0 the issue is still there.
fedemyth said:
Exactly the same problem here. On windows 8, no issue. After updating to 8.1, "Error enumerating device id". I've tried everything, but nothing.
I had my xperia without kernel, and I REALLY needed Fastboot, so I had to go to a W7 pc, and no issue then.
Ohh, and I can't disable driver verification on W8.1 . When i'm in advanced boot menu, I just can't press any key. The keyboard doesn't work, and I have to Hard Reboot. Any idea?
EDITED
This worked for me : http://www.droid-now.com/2013/10/fix...ndows-8-1-x64/
So now I can use fastboot/ flashmode, but only if I connect the phone to an usb 3.0 port. On 2.0 the issue is still there.
Click to expand...
Click to collapse
Nice share brotha.
I want to make it work for x32 bit
Sent from my LT25i using XDA Premium 4 mobile app
As I see the only way to get access to fastboot and flash mode is to use windows 8 or lower.
Here is the cause of our problem and there is no solution so far: http://blogs.msdn.com/b/usbcoreblog...8-0-but-fail-on-windows-8-1-with-code-43.aspx
EDIT: I used the old XP machine of my parents to unlock the bootloader and everything worked fine
well w8.1 certainly cannot use fastboot if you plug it into USB 2.0 port..as microsoft has change it usb policies in w8.1, the only way to use fastboot in w8.1 is to plug into a USB 3.0 hub, and install your driver the same way before..
Hey guys,
long story short: I flashed my device and now my pc wont recognise the usb-connection between my phone and computer. The hardware-manager describes as if the phone cant tell the computer that it is a z3 compact.
Errormessage: Unknown USB-device (Cannot get the device description)
*something like that*
what I did to troubleshoot:
- reflash the device with firmeware: A.1.264 (without this strange script)
- reflash the device with the concept preview (without this strange script)
- installed PC Companion from Sony
- Linux cant see the phone, but can flash it
- USB-Debugging wont work as well
Nothing worked for me so far. Anyone an idea what to do?
thanks in advance
Nummer35 said:
Hey guys,
long story short: I flashed my device and now my pc wont recognise the usb-connection between my phone and computer. The hardware-manager describes as if the phone cant tell the computer that it is a z3 compact.
Errormessage: Unknown USB-device (Cannot get the device description)
*something like that*
what I did to troubleshoot:
- reflash the device with firmeware: A.1.264 (without this strange script)
- reflash the device with the concept preview (without this strange script)
- installed PC Companion from Sony
- Linux cant see the phone, but can flash it
- USB-Debugging wont work as well
Nothing worked for me so far. Anyone an idea what to do?
thanks in advance
Click to expand...
Click to collapse
I tried a fresh install of windows 10 and flashed the official 6.0.1 update fia .zip
NOTHING HELPED any ideas?
Nummer35 said:
NOTHING HELPED any ideas?
Click to expand...
Click to collapse
Some roms come with the usb functions disabled, removed as bloatware. So it's possible the first rom you tried didn't have the usb functions installed.
Do you have the correct drivers
Presumably flashtool can see your phone and it's still charging, so I'm sure the hardware is ok.
Did you try a repair with PC companion?
Do you have a different usb lead you can try?
Didgesteve said:
Some roms come with the usb functions disabled, removed as bloatware. So it's possible the first rom you tried didn't have the usb functions installed.
Do you have the correct drivers
Presumably flashtool can see your phone and it's still charging, so I'm sure the hardware is ok.
Did you try a repair with PC companion?
Do you have a different usb lead you can try?
Click to expand...
Click to collapse
Hey,
thanks for your answere. I found a "solution" to connect the phone via fastboot to the pc and with this I could do a complete reset with the PCC. When the phone is booted however I get the same error message over and over again: Cant get a device description!
Maybe you can look up the specific driver which is used in the device-manager so I can force windows to use this one?
Nummer35 said:
Hey,
thanks for your answere. I found a "solution" to connect the phone via fastboot to the pc and with this I could do a complete reset with the PCC. When the phone is booted however I get the same error message over and over again: Cant get a device description!
Maybe you can look up the specific driver which is used in the device-manager so I can force windows to use this one?
Click to expand...
Click to collapse
Did you install the ADB drivers that come with flashtool? Look in the install folder for a folder called 'drivers' run the exe in there and tik the fist two and then Z3c.
Yep, all three unsigned drivers.
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
rocco24 said:
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
Click to expand...
Click to collapse
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
5.1 said:
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
Click to expand...
Click to collapse
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
rocco24 said:
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
Click to expand...
Click to collapse
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
5.1 said:
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
5.1 said:
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
Click to expand...
Click to collapse
I tried different cables/PCs nothing worked. I think my phone USB port is defected but what confuses me more is that it can be charged just fine but no USB connectivity
It is still under warranty but not sure if it will be honored since I have the bootloader unlocked.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
5.1 said:
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
Click to expand...
Click to collapse
Nothing like said it is dead. I have another nexus 6 can connect easily to the PC I am pretty sure it is a phone issue.
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
5.1 said:
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
Click to expand...
Click to collapse
thanks for your time and help.
So the nexus 6 gets old now, may just check to clean your port
coremania said:
So the nexus 6 gets old now, may just check to clean your port
Click to expand...
Click to collapse
Tried that already it didn't work
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
aliinbox said:
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
Click to expand...
Click to collapse
This has already been discussed if you read the "few" previous posts ... Device isn't detected at all...