Completely DEAD (temporarily) - Realme X2 Pro Questions & Answers

I installed Lineage OS on my new X2 Pro and it was working OK for 1 day. This morning it had 50% charge. I powered off the phone, plugged it into the SuperVOOC charger. Lightning bolt charging indicator. Came back 1 hour later and the phone is completely dead. :crying: Nothing on screen, no response to power button or Volume Down + power, whether plugged in, unplugged or connected to computer.
Any suggestions?

Undead: 10 minutes later the phone is back from the dead… I don't know why, but it finally booted. The battery is full.

Related

Help, phone wont charge after reboot

Hello, when I got my g1 it wouldn't charge phone would boot up when it was plugged in the light would come on and it would display "charging 0%" on the lock screen and would shut off whenever it was unplugged, with some messing around, rebooting removing reinstalling battery and plugging and unplugging the phone I managed to get it to start charging, all was great other than the battery only lasted like 3 hours, and whenever the phone lost power either by pulling the battery or even shutting it off properly it would revert back to 0% and wouldn't charge again till I messed with it and it would work again, so I ordered a new battery, when it came in I installed it and everything was awesome, I could restart the phone or remove the battery flash roms all that good stuff like it was supposed to, till yesterday, I have had the replacement battery about a month now and my phone was running low on charge since I wouldn't be home for a while I shut it down to save it for later, I was walking by the phone sitting there and I saw the back light turn on and off so I thought dang back to the same ol problem, tried to turn it on and just a dim red led and no power on, when I got home plugged it in let it charge for a few min and held the power button I got the red led and it finally turned on to "charging 0%" I was mad at it tested voltafe at battery terminals and phone terminals plugged in power everywhere it should be but still no turn on, I didn't my messing around again and got it to charge but it was back to 3 hour or so battery life and it would be at 0% if I shut it down, I don't think its the connection with the battery because I haven't removed it in a good 3 weeks or shut the phone off since my last flash 3 weeks ago.
It did this with the first battery before I rooted but here's current setup
Phone is black g1 drea100
Rom htc adp-drc83 rooted base with exp pack
Radio 2.22.19.26I
Recovery ra-dream-v1.5.2
Thanks for any help

[Solved] Upgraded to CM7 RC14 (doshaska), now battery will not charge on my Milestone

Edit: thanks to this post, my problem has been solved. Thanks!
So last night I went from stock motorola 2.2 to this wonderful-seeming version of CyanogenMod on my UK milestone - the install went flawlessly, but now I have a problem - my battery is not charging at ALL.
While the phone was on last night after I charged it, it was plugged in, first to my PC and then to the wall socket. In both cases, the battery indicator had a ? (question mark) on it.
I thought it might have been some weirdness with battery calibration so I left it and plugged the phone in from the wall to charge overnight. This morning, my phone was telling me to connect my charger (despite it being plugged in) and on removing the power cable, it died due to no battery power left within 10 minutes.
While plugged in from the wall, the battery indicator comes up but again just contains a ? on it. The little white light next to the power socket never lights up.
If I plug the phone in to my PC via USB then if the handset is OFF, the white light comes on and around 10 mins later it gets enough juice to boot up. The problem is that when the CM7 software starts, the little white light disappears, the phone stops charging despite the cable being present, and it then dies 2 minutes later.
I know the battery is fine because it was perfectly fine before I installed CM7.
Anyone else experienced this problem and/or know how to fix it?
One thing I did manage to do before it died was install a battery calibration app that I found on xda-developers - this told me that the battery was running at 3267 mV - any idea if that's good or bad?
(and yes, I'm using precisely the same cable/charger I was using before I put this version of CM7 on, so I know they are fine - they charge a friend's SGS with no problems)
thatbloke83 said:
So last night I went from stock motorola 2.2 to this wonderful-seeming version of CyanogenMod on my UK milestone - the install went flawlessly, but now I have a problem - my battery is not charging at ALL.
While the phone was on last night after I charged it, it was plugged in, first to my PC and then to the wall socket. In both cases, the battery indicator had a ? (question mark) on it.
I thought it might have been some weirdness with battery calibration so I left it and plugged the phone in from the wall to charge overnight. This morning, my phone was telling me to connect my charger (despite it being plugged in) and on removing the power cable, it died due to no battery power left within 10 minutes.
While plugged in from the wall, the battery indicator comes up but again just contains a ? on it. The little white light next to the power socket never lights up.
If I plug the phone in to my PC via USB then if the handset is OFF, the white light comes on and around 10 mins later it gets enough juice to boot up. The problem is that when the CM7 software starts, the little white light disappears, the phone stops charging despite the cable being present, and it then dies 2 minutes later.
I know the battery is fine because it was perfectly fine before I installed CM7.
Anyone else experienced this problem and/or know how to fix it?
One thing I did manage to do before it died was install a battery calibration app that I found on xda-developers - this told me that the battery was running at 3267 mV - any idea if that's good or bad?
(and yes, I'm using precisely the same cable/charger I was using before I put this version of CM7 on, so I know they are fine - they charge a friend's SGS with no problems)
Click to expand...
Click to collapse
Try plugging the phone into the wall charger, without the battery. Try and boot it up and let it boot. Once it's booted up, give it a bit and try and put the battery in and leave it to charge.
What happens if you turn off you phone and plug it in a wall charger? If the problem isn't in your battery it will charge fully.
When you phone comes up, try to disable the 1% battery steps in settings. I got a problem with it, and after disabled/enabled it worked fine for me.
Hope this helps.
On plugging it into a wall charger, the phone comes up with its special battery charging screen (i.e. a fullscreen battery level indicator) - no amount of pressing the power button seems to get it to boot properly (with or without the battery).
I'll see if I can get in and get rid of the 1% steps thing later, thanks for the suggestion
afonsolage said:
What happens if you turn off you phone and plug it in a wall charger? If the problem isn't in your battery it will charge fully.
When you phone comes up, try to disable the 1% battery steps in settings. I got a problem with it, and after disabled/enabled it worked fine for me.
Hope this helps.
Click to expand...
Click to collapse
Dude, that was PERFECT.
Managed to get enough juice into the thing to get into the menu for a moment and was able to disable the 1% battery steps option - soon as I touch that tickbox, the battery indicator switches from a ? to the charging symbol and the phone starts charging. Thanks a million!
Nop dude, you are welcome

HTC One Won't Charge while turning on or off, but Charging When the Battery drained

Hi guys i have been having this issue for 2 days now. I have tried many solution in this forum but they won't work. Here's my issue.
1. I used up the battery. When i charge it, the screen with battery and lightning icon appear, then the charging meter. These 2 screens flashing were switching when i charged.
2. I let it charged until it reached maybe 30%. I turned it on then plugged the cable in, not charging. I had tried turning it off and charge, it was not charging too.
3. I had used up the battery again and plugged the wire, it was charging with those 2 screens flashing.
4. I let it charged for whole night, until this morning it said it had been fully charged to 100%. I turned it on, it still doesn't charge when turned on.
Someone please help me. I tried volume up and power button, volume down, both volume buttons and power button. Nothing work.
Please help me guys!

Xperia Z1 charging very very slowly...

Hello.
I bought xperia Z1 yesterday (I got it with around 22% of battery). Firstly when I got home phone was at 18% and for 1.5 it charged to 25%. I was confused with a message "21 hours remaining to get fully charged" and when I went into phone information, I saw that battery could last 3 days. Nevertheless, I went out clubbing with 25% and returned home with around 15%. I thought you need to format the battery (as I did with my previous phones) so I was using it until phone turned off completely. Phone was put to charge at 4 a.m. into a power socket using original charger which I've got with the phone and when I woke up at 11 a.m. it was not charged. It couldn't even get turned on. It displayed nothing but red light.
Then I pressed volume up + switch on/off button, it vibrated 3 times then I put it into computer to get a USB charge. Now after an hour, phone has charged up to only 6% of battery but I'm glad I can see something (meaning, it shows how much it is charged - I couldn't see anything after I woke up and disconnected it from a socket).
I searched the internet and couldn't find any solution. I see people charging their Z1's within 3 hours max and mine hasn't charged with 8 hours spent plugged in a socket. What also worries me is that it charges really slowly, a lot slower than it should be.
I'd be thankful if anyone can help me.
Eagle95 said:
Hello.
I bought xperia Z1 yesterday (I got it with around 22% of battery). Firstly when I got home phone was at 18% and for 1.5 it charged to 25%. I was confused with a message "21 hours remaining to get fully charged" and when I went into phone information, I saw that battery could last 3 days. Nevertheless, I went out clubbing with 25% and returned home with around 15%. I thought you need to format the battery (as I did with my previous phones) so I was using it until phone turned off completely. Phone was put to charge at 4 a.m. into a power socket using original charger which I've got with the phone and when I woke up at 11 a.m. it was not charged. It couldn't even get turned on. It displayed nothing but red light.
Then I pressed volume up + switch on/off button, it vibrated 3 times then I put it into computer to get a USB charge. Now after an hour, phone has charged up to only 6% of battery but I'm glad I can see something (meaning, it shows how much it is charged - I couldn't see anything after I woke up and disconnected it from a socket).
I searched the internet and couldn't find any solution. I see people charging their Z1's within 3 hours max and mine hasn't charged with 8 hours spent plugged in a socket. What also worries me is that it charges really slowly, a lot slower than it should be.
I'd be thankful if anyone can help me.
Click to expand...
Click to collapse
Are you charging it with the original cable and charger? Try another charger.
Yes, I'm charging with original adapter and original usb cable.
I solved the problem. Problem was the original usb cable. It's perfect looking but god knows what's happening inside, it could be a factory error - it's not supplementing enough current from adapter to phone.
I solved the problem by using original adapter and usb cable from my htc wildfire s. Now it's charging as it should, it'll be full within 2 hours or so (phone is turned on now and I'm making calls so it's under stress).

Moto G5S+ dead, won't turn on

Hello,
I need help. My phone won't turn on.
Last used by my son, he was watching Netflix and drained the battery completely. So I charged the phone using the original charger it came with (turbo charger). It was charging fine and I turned it on (so I can receive notifications).
When I checked the phone after an hour it was off. I tried to turn it on but it won't. I noticed that a tiny light is blinking on the upper left corner of the phone. If I press power, nothing on the screen comes on. Normally when I do that it will show how many percent of the battery is now charged. But the screen is just off. Like dead. Except for the tiny light that blinks when it is plugged in to the charger.
I googled and here are the steps that I have taken:
• used another charger (higher amp) - won't turn on and won't charge except for the tiny light that still blinks
• used another charger (lower amp) - won't turn on and won't charge except for the tiny light that still blinks
• tested original charger and all the chargers and it works for the other phone in the house
• left it to charge several hours using original charger and a separate time charging using the other chargers in the house - won't turn on and won't charge except for the tiny light that still blinks
• left it unused overnight then charged in the morning - still no go
• Pressed power button (also power+volume down) 3 minutes - won't turn on
• Pressed power button (also power+volume down) 3 minutes while plugged in to the charger/pc - won't turn on
• connected the phone to PC - not detected
Right now it is in the freezer because one of the search results I saw said to put it in for 5 minutes and then charge. I am trying almost anything I can find. Warranty is no go because this is a 13 month old phone. :crying:
I need help from anyone here who has suggestions I can try. :crying::crying::crying:
It is not a complete answer as there is a part missing in the next solution but I could get my wifes G5s back to life:
https://forum.xda-developers.com/moto-g5s/how-to/blank-flash-montana-t3765150
Here is how to create such a sd card requiring the same region phone:
https://forum.xda-developers.com/moto-g5s/how-to/guide-how-to-create-mmcblk0-img-device-t3803176
Hello
Thanks for your help although
My phone is now up and running (after 3 days being dead)
What happened was I was ready to follow the link you sent
I connected my phone to laptop then without doing anything else (just plugged in) I finally saw the lightning icon on the screen indicating that it is charging
So I unplugged my phone and charged it using original charger and after leaving it for 3 hours it is now fully charged at 100% I am using it now as I am typing my reply
I am so happy.
The only thing I did before this worked again was I left my phone in the freezer for a few hours lol
Then left it unused whole day
Then tonight I plugged it in the laptop and voila that's what happened
Even better, less fuss!
Hi guys, any chance that someone can provide me a mmcblk0.img file for XT1805?

Categories

Resources